Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Laser assisted high entropy alloy coating on aluminum: Microstructural evolution

High entropy alloy (Al-Fe-Co-Cr-Ni) coatings were synthesized using laser surface engineering on aluminum substrate. Electron diffraction analysis confirmed the formation of solid solution of body centered cubic high entropy alloy phase along with phases with long range periodic structures within the coating. Evolution of such type of microstructure was a result of kinetics associated with laser process, which generates higher temperatures and rapid cooling resulting in retention of high entropy alloy phase followed by reheating and/or annealing in subsequent passes of the laser track giving rise to partial decomposition. The partial decomposition resulted in formation of precipitates having layered morphology with a mixture of high entropy alloy rich phases, compounds, and long range ordered phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An ultra-compact, high-throughput molecular beam epitaxy growth system

We present a miniaturized molecular beam epitaxy (miniMBE) system with an outer diameter of 206 mm, optimized for flexible and high-throughput operation. The three-chamber system, used here for oxide growth, consists of a sample loading chamber, a storage chamber, and a growth chamber. The growth chamber is equipped with eight identical effusion cell ports with linear shutters, one larger port for either a multi-pocket electron beam evaporator or an oxygen plasma source, an integrated cryoshroud, retractable beam-flux monitor or quartz-crystal microbalance, reflection high energy electron diffraction, substrate manipulator, main shutter, and quadrupole mass spectrometer. The system can be combined with ultrahigh vacuum (UHV) end stations on synchrotron and neutron beamlines, or equivalently with other complex surface analysis systems, including low-temperature scanning probe microscopy systems. Substrate handling is compatible with most UHV surface characterization systems, as the miniMBE can accommodate standard surface science sample holders. We introduce the design of the system, and its specific capabilities and operational parameters, and we demonstrate the epitaxial thin film growth of magnetoelectric Cr{sub 2}O{sub 3} on c-plane sapphire and ferrimagnetic Fe{sub 3}O{sub 4} on MgO (001)

36 MATERIALS SCIENCE↗

Spectroscopic ellipsometry and x-ray photoelectron spectroscopy of La{sub 2}O{sub 3} thin films deposited by reactive magnetron sputtering

Lanthanum oxide (La{sub 2}O{sub 3}) films were grown by the reactive dc magnetron sputtering and studied their structural, chemical and optical parameters. La{sub 2}O{sub 3} films were deposited onto Si substrates by sputtering La-metal in a reactive gas (Ar+O{sub 2}) mixture at a substrate temperature of 200 deg. C Reflection high-energy electron diffraction measurements confirm the amorphous state of La{sub 2}O{sub 3} films. Chemical analysis of the top-surface layers evaluated with x-ray photoelectron spectroscopy indicates the presence of a layer modified by hydroxylation due to interaction with atmosphere. Optical parameters of a-La{sub 2}O{sub 3} were determined with spectroscopic ellipsometry (SE). There is no optical absorption over spectral range {lambda}=250-1100 nm. Dispersion of refractive index of a-La{sub 2}O{sub 3} was defined by fitting of SE parameters over {lambda}=250-1100 nm.

36 MATERIALS SCIENCE↗

Molecular Surface Chemistry by Metal Single Crystals and Nanoparticles from Vacuum to High Pressure.

Model systems for studying molecular surface chemistry have evolved from single crystal surfaces at low pressure to colloidal nanoparticles at high pressure. Low pressure surface structure studies of platinum single crystals using molecular beam surface scattering and low energy electron diffraction techniques probe the unique activity of defects, steps and kinks at the surface for dissociation reactions (H-H, C-H, C-C, O{double_bond}O bonds). High-pressure investigations of platinum single crystals using sum frequency generation vibrational spectroscopy have revealed the presence and the nature of reaction intermediates. High pressure scanning tunneling microscopy of platinum single crystal surfaces showed adsorbate mobility during a catalytic reaction. Nanoparticle systems are used to determine the role of metal-oxide interfaces, site blocking and the role of surface structures in reactive surface chemistry. The size, shape and composition of nanoparticles play important roles in determining reaction activity and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative analysis of the mechanisms of interface formation in a film structure under equilibrium and strongly nonequilibrium condition

Structural (X-ray and electron diffraction) investigations of the interface in films of (Zn {sub 1-x} Cd{sub x}Te) {sub 1-y} (In{sub 2}Te{sub 3}) {sub y} alloys and zinc selenide grown on glass substrates under strongly nonequilibrium (substrate temperature T{sub s} = 200 K) and quasi-equilibrium (T{sub s} = 473 K) conditions have been performed. It is shown that growth of alloy films occurs through formation of nuclei of different shape and orientation. It is established that the alloy films grown on a cooled substrate have better (with respect to crystalline orientation) structural quality in comparison with similar films grown on a heated substrate, where Ostwald ripening plays an important role during growth.

36 MATERIALS SCIENCE↗

Temperature dependence of epitaxial graphene formation on SiC(0001).

The formation of epitaxial graphene on SiC(0001) surfaces is studied using atomic force microscopy, Auger electron spectroscopy, electron diffraction, Raman spectroscopy, and electrical measurements. Starting from hydrogen-annealed surfaces, graphene formation by vacuum annealing is observed to begin at about 1150 C, with the overall step-terrace arrangement of the surface being preserved but with significant roughness (pit formation) on the terraces. At higher temperatures near 1250 C, the step morphology changes, with the terraces becoming more compact. At 1350 C and above, the surface morphology changes into relatively large flat terraces separated by step bunches. Features believed to arise from grain boundaries in the graphene are resolved on the terraces, as are fainter features attributed to atoms at the buried graphene/SiC interface.

36 MATERIALS SCIENCE↗

Epitaxial growth of diluted magnetic semiconductor Ge{sub 1−x}Cr{sub x}Te with high Cr composition

IV–VI diluted magnetic semiconductor Ge{sub 1−x}Cr{sub x}Te layers up to x = 0.1 were grown on SrF{sub 2} substrates by molecular beam epitaxy. In situ reflection high-energy electron diffraction shows a streaky pattern with a sixfold symmetry in the plane for the Ge{sub 1−x}Cr{sub x}Te layer, implying an epitaxial growth of Ge{sub 1−x}Cr{sub x}Te (111)/SrF{sub 2} (111). A clear hysteresis loop is observed in the anomalous Hall effect measurements due to the strong spin-orbit interaction in the host GeTe. The Curie temperature increases with increasing Cr composition up to 200 K, but there is no clear dependence of the Curie temperature on the hole concentration, implying that the mechanism of the ferromagnetic interaction among Cr ions is different from Mn doped diluted magnetic semiconductors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Focusing of relativistic electron beams with permanent magnetic solenoid

Achieving strong focusing of MeV electron beams is a critical requirement for advanced beam applications such as compact laboratory x-ray sources, high gradient accelerators, and ultrafast electron scattering instrumentation. To address these needs, a compact radially magnetized permanent magnetic solenoid (PMS) has been designed, fabricated, and tested. The solenoid provides a compact and inexpensive solution for delivering high axial magnetic fields (1 T) to focus MeV electron beams. Field characterization of the solenoid demonstrates good agreement with analytical models, validating the PMS design. The electron beam test employs a high-brightness photoinjector to study the focusing properties of the PMS. The results indicate a focal length of less than 10 cm and a significant reduction in beam size with small spherical aberrations. Two application cases are evaluated: angular magnification in ultrafast electron diffraction setups and strong focusing for Compton scattering or other microfocus uses.

Electron diffraction↗

Influence of step morphology on the structural phase transition of the α-Al{sub 2}O{sub 3}(0001) surface

The structural phase transition from the 1 × 1 to the √31 × √31 ± R9° structure of two types of α-Al{sub 2}O{sub 3}(0001) surfaces has been investigated using reflection high-energy electron diffraction. One of the α-Al{sub 2}O{sub 3}(0001) surfaces was composed of regularly arranged monolayer steps (M-surface), and the other surface was composed of multiples of bilayer high steps (B-surface). The surface transition from the 1 × 1 to the √31 × √31 ± R9° structure starts at 1200 °C on the M-surface, but the transition occurs at 1600 °C on the B-surface. We discuss the difference in the stability of these surfaces at high temperature from the viewpoint of the stoichiometry near the step edge and conclude that the B-surface is more stable than the M-surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface structures of In-Pd intermetallic compounds. I. Experimental study of In thin films on Pd(111) and alloy formation

A combination of experimental methods was used to study the structure of In thin films deposited on the Pd(111) surface and the alloying behavior. X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction (LEED), and scanning tunneling microscopy results indicate that surface alloying takes place at room temperature. Below 2 monolayer equivalents (MLEs), the LEED patterns show the formation of three rotational domains of InPd(110) of poor structural quality on top of the Pd(111) substrate. Both core-levels and valence band XPS spectra show that the surface alloy does not yet exhibit the electronic structure characteristic of the 1:1 intermetallic compound under these conditions. Annealing the 1 MLE thin film up to 690 K yields to a transition from a multilayer InPd near-surface intermetallic phase to a monolayer-like surface alloy exhibiting a well ordered (√(3)×√(3)) R30{sup ∘} superstructure and an estimated composition close to In{sub 2}Pd{sub 3}. Annealing above 690 K leads to further In depletion and a (1 × 1) pattern is recovered. The (√(3)×√(3)) R30{sup ∘} superstructure is not observed for thicker films. Successive annealing of the 2 MLE thin film leads the progressive disappearance of the InPd diffraction spots till a sharp (1 × 1) pattern is recovered above 690 K. In the high coverage regime (from 4 to 35 MLE), the formation of three rotational domains of a bcc-In{sub 7}Pd{sub 3} compound with (110) orientation is observed. This In-rich phase probably grows on top of interfacial InPd(110) domains and is metastable. It transforms into a pure InPd(110) near-surface intermetallic phase in a temperature range between 500 and 600 K depending on the initial coverage. At this stage, the surface alloy exhibits core-level chemical shifts and valence band (VB) spectra identical to those of the 1:1 InPd intermetallic compound and resembling Cu-like density of states. Annealing at higher temperatures yields to a decrease of the In concentration in the near-surface region to about 20 at.% and a (1 × 1) LEED pattern is recovered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stoichiometric, nonstoichiometric, and locally nonstoichiometric SrTiO{sub 3} films grown by molecular beam epitaxy

SrTiO{sub 3} films were grown by reactive molecular beam epitaxy to have varying degrees of both global and local cationic nonstoichiometries (with stoichiometry defined as a 1:1 ratio of Sr:Ti). Slight global excesses of Sr and Ti resulted in two-fold reconstructions in the reflection high-energy electron diffraction patterns along the [110] and [100] azimuths, respectively. Larger global nonstoichiometries (2:1 and 1:2 ratios) were also accommodated into the film's crystalline structure and affected the long-range crystalline order as observed in the x-ray diffraction patterns, both of which were related to the parent perovskite pattern. Local nonstoichiometries were introduced by depositing multiple monolayers (MLs) (from 2 to 33) of SrO and TiO{sub 2} in an alternating fashion, while maintaining the global SrTiO{sub 3} stoichiometry. These layered structures of SrO and TiO{sub 2} blocks inter-reacted during growth to form highly crystalline epitaxial SrTiO{sub 3}. Films grown in this manner with blocks thicker than 8 MLs were fully relaxed and, when the block thicknesses ranged between 8 and 10 MLs, the full widths at half maxima of 2{theta} peaks were narrower than the standard SrTiO{sub 3} films having blocks 1 ML thick.

36 MATERIALS SCIENCE↗

Effect of AlN buffer layer properties on the morphology and polarity of GaN nanowires grown by molecular beam epitaxy

Low-temperature AlN buffer layers grown via plasma-assisted molecular beam epitaxy on Si (111) were found to significantly affect the subsequent growth morphology of GaN nanowires. The AlN buffer layers exhibited nanowire-like columnar protrusions, with their size, shape, and tilt determined by the AlN V/III flux ratio. GaN nanowires were frequently observed to adopt the structural characteristics of the underlying AlN columns, including the size and the degree of tilt. Piezoresponse force microscopy and polarity-sensitive etching indicate that the AlN films and the protruding columns have a mixed crystallographic polarity. Convergent beam electron diffraction indicates that GaN nanowires are Ga-polar, suggesting that Al-polar columns are nanowire nucleation sites for Ga-polar nanowires. GaN nanowires of low density could be grown on AlN buffers that were predominantly N-polar with isolated Al-polar columns, indicating a high growth rate for Ga-polar nanowires and suppressed growth of N-polar nanowires under typical growth conditions. AlN buffer layers grown under slightly N-rich conditions (V/III flux ratio = 1.0 to 1.3) were found to provide a favorable growth surface for low-density, coalescence-free nanowires.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy of ZnSSe/CdSe short-period superlattices for III–V/II–VI multijunction solar cells

Results on the molecular-beam epitaxy growth of short-period alternately-strained ZnS{sub x}Se{sub 1−x}/CdSe superlattices which are pseudomorphic to GaAs (001) substrates and possess effective band-gap values within the range of E{sub g} ≈ 2.5–2.7 eV are presented. Oscillations of the specular-spot intensity in reflection high-energy electron diffraction are used for in situ control of the superlattice parameters. A method to determine the SL parameters (compositions and thicknesses of the constituent layers) based on combined analysis of the grown structures by low-temperature photoluminescence and X-ray diffractometry is developed. It is found that the parameters of the grown ZnS{sub x}Se{sub 1−x}/CdSe superlattices are close to their design values and the density of extended defects in the structures is low even though the structure thickness (∼300 nm) considerably exceeds the critical thickness for bulk II–VI layers with the same lattice-constant mismatch.

36 MATERIALS SCIENCE↗

No Confinement Needed: Observation of a Metastable Hydrophobic Wetting Two-Layer Ice on Graphene

The structure of water at interfaces is crucial for processes ranging from photocatalysis to protein folding. Here, we investigate the structure and lattice dynamics of two-layer crystalline ice films grown on a hydrophobic substrate - graphene on Pt(111) - with low energy electron diffraction, reflection-absorption infrared spectroscopy, rare-gas adsorption/desorption, and ab-initio molecular dynamics. Unlike hexagonal ice, which consists of stacks of puckered hexagonal "bilayers", this new ice polymorph consists of two flat hexagonal sheets of water molecules in which the hexagons in each sheet are stacked directly on top of each other. Such two-layer ices have been predicted for water confined between hydrophobic slits, but not previously observed. Our results show that the two-layer ice forms even at zero pressure at a single hydrophobic interface by maximizing the number of hydrogen bonds at the expense of adopting a non-tetrahedral geometry with weakened bonds.

08 HYDROGEN↗

Important role of the non-uniform Fe distribution for the ferromagnetism in group-IV-based ferromagnetic semiconductor GeFe

We investigate the growth-temperature dependence of the properties of the group-IV-based ferromagnetic semiconductor Ge{sub 1−x}Fe{sub x} films (x = 6.5% and 10.5%), and reveal the correlation of the magnetic properties with the lattice constant, Curie temperature (T{sub C}), non-uniformity of Fe atoms, stacking-fault defects, and Fe-atom locations. While T{sub C} strongly depends on the growth temperature, we find a universal relationship between T{sub C} and the lattice constant, which does not depend on the Fe content x. By using the spatially resolved transmission-electron diffractions combined with the energy-dispersive X-ray spectroscopy, we find that the density of the stacking-fault defects and the non-uniformity of the Fe concentration are correlated with T{sub C}. Meanwhile, by using the channeling Rutherford backscattering and particle-induced X-ray emission measurements, we clarify that about 15% of the Fe atoms exist on the tetrahedral interstitial sites in the Ge{sub 0.935}Fe{sub 0.065} lattice and that the substitutional Fe concentration is not correlated with T{sub C}. Considering these results, we conclude that the non-uniformity of the Fe concentration plays an important role in determining the ferromagnetic properties of GeFe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural properties of the graphene-SiC(0001) interface as a key for the preparation of homogeneous large-terrace graphene surfaces

We report on the interface between graphene and 4H-SiC(0001) as investigated by scanning tunneling microscopy (STM) and low energy electron diffraction (LEED). It is characterized by the so-called (6{radical}(3)x6{radical}(3))R30 deg. reconstruction, whose structural properties are still controversially discussed but at the same time are crucial for the controlled growth of homogeneous high-quality large-terrace graphene surfaces. We discuss the role of three observed phases with periodicities (6{radical}(3)x6{radical}(3))R30 deg. (6x6), and (5x5). Their LEED intensity levels and spectra strongly depend on the surface preparation procedure applied. The graphitization process imprints distinct features in the STM images as well as in the LEED spectra. The latter have the potential for an easy and practicable determination of the number of graphene layers by means of LEED.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of FePt encapsulated carbon nanotubes by thermal chemical vapor deposition

FePt encapsulated carbon nanotubes (CNTs) were grown by thermal chemical vapor deposition using an Fe/Pt bilayer catalyst. The CNTs were grown according to the base growth model. Selected area electron diffraction results revealed that the encapsulated particles were A1-FePt, L1{sub 0}-FePt, and Fe{sub 3}PtC. The crystal structures of particles found at the root parts of CNTs were not able to be identified, however. The layered structure of catalytic films seemed to be responsible for the difference in Pt content between particles found at tip and root parts of CNTs. Approximately 60% of CNTs grown at 800 °C had particles at their tip parts, compared to only 30% when the growth temperature was 700 °C, indicating that higher process temperatures promote particle encapsulation in CNTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

(Ga,Fe)Sb: A p-type ferromagnetic semiconductor

A p-type ferromagnetic semiconductor (Ga{sub 1−x},Fe{sub x})Sb (x = 3.9%–13.7%) has been grown by low-temperature molecular beam epitaxy (MBE) on GaAs(001) substrates. Reflection high energy electron diffraction patterns during the MBE growth and X-ray diffraction spectra indicate that (Ga,Fe)Sb layers have the zinc-blende crystal structure without any other crystallographic phase of precipitates. Magnetic circular dichroism (MCD) spectroscopy characterizations indicate that (Ga,Fe)Sb has the zinc-blende band structure with spin-splitting induced by s,p-d exchange interactions. The magnetic field dependence of the MCD intensity and anomalous Hall resistance of (Ga,Fe)Sb show clear hysteresis, demonstrating the presence of ferromagnetic order. The Curie temperature (T{sub C}) increases with increasing x and reaches 140 K at x = 13.7%. The crystal structure analyses, magneto-transport, and magneto-optical properties indicate that (Ga,Fe)Sb is an intrinsic ferromagnetic semiconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗