Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Growth of SrTiO{sub 3}(110) film by oxide molecular beam epitaxy with feedback control

By controlling the growth of complex oxide films with atomic precision, emergent phenomena and fascinating properties have been discovered, and even been manipulated. With oxide molecular beam epitaxy (OMBE) we grow high-quality SrTiO{sub 3}(110) films by evaporating Sr and Ti metals with separate controls of the open/close timing of the shutters. The incident electron beam angle of the reflective high energy electron diffraction (RHEED) is adjusted to make the (01) beam sensitive to surface chemical concentration. By monitoring such an intensity, we tune the shutter timing to synchronize the evaporation amount of Sr and Ti in real-time. The intensity is further used as a feedback control signal for automatic growth optimization to fully compensate the possible fluctuation of the source flux rates upon extended growth. A 22 nm-thick film is obtained with the precision of metal cation stoichiometry better than 0.5%.

36 MATERIALS SCIENCE↗

Effects of pressure, temperature, and hydrogen during graphene growth on SiC(0001) using propane-hydrogen chemical vapor deposition

Graphene growth from a propane flow in a hydrogen environment (propane-hydrogen chemical vapor deposition (CVD)) on SiC differentiates from other growth methods in that it offers the possibility to obtain various graphene structures on the Si-face depending on growth conditions. The different structures include the (6{radical}3 Multiplication-Sign 6{radical}3)-R30 Degree-Sign reconstruction of the graphene/SiC interface, which is commonly observed on the Si-face, but also the rotational disorder which is generally observed on the C-face. In this work, growth mechanisms leading to the formation of the different structures are studied and discussed. For that purpose, we have grown graphene on SiC(0001) (Si-face) using propane-hydrogen CVD at various pressure and temperature and studied these samples extensively by means of low energy electron diffraction and atomic force microscopy. Pressure and temperature conditions leading to the formation of the different structures are identified and plotted in a pressure-temperature diagram. This diagram, together with other characterizations (X-ray photoemission and scanning tunneling microscopy), is the basis of further discussions on the carbon supply mechanisms and on the kinetics effects. The entire work underlines the important role of hydrogen during growth and its effects on the final graphene structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and dielectric properties of epitaxial SrTiO{sub 3} films grown directly on GaAs substrates by laser molecular beam epitaxy

Epitaxial SrTiO{sub 3} films were grown on GaAs (001) substrates without any buffer layers using laser molecular beam epitaxy technique. The reflection high-energy electron diffraction observations have revealed that a layer-by-layer growth of SrTiO{sub 3} was achieved at optimized deposition conditions. The crystalline orientation of the as-grown SrTiO{sub 3} (001) films rotates 45 deg. in plane with respect to the GaAs substrates. Atomic force microscope studies show that these films possess atomically flat surfaces. The dielectric properties of the heterostructure were also investigated. Our results have clearly demonstrated the practicality of integrating perovskite oxide thin films with GaAs substrates.

36 MATERIALS SCIENCE↗

Structure of Ultrathin Polycrystalline Iron Films Grown on SiO{sub 2}/Si(001)

The structure of polycrystalline Fe films grown on an oxidized Si(001) surface at room temperature has been studied by the technique of high-energy electron diffraction. It has been found that the grain orientation in the films depends of the amount of deposited iron. In Fe films less than 5 nm thick, grains have been found to be randomly oriented. Fe films more than 5 nm in thickness exhibit the (111) texture with an axis coinciding with the surface normal. The angular dispersion of the [111] direction in the Fe lattice from the surface normal is ±25°. It has been found that as the Fe films become thicker, the (111) texture changes to the (110) texture.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High quality single atomic layer deposition of hexagonal boron nitride on single crystalline Rh(111) four-inch wafers

The setup of an apparatus for chemical vapor deposition (CVD) of hexagonal boron nitride (h-BN) and its characterization on four-inch wafers in ultra high vacuum (UHV) environment is reported. It provides well-controlled preparation conditions, such as oxygen and argon plasma assisted cleaning and high temperature annealing. In situ characterization of a wafer is accomplished with target current spectroscopy. A piezo motor driven x-y stage allows measurements with a step size of 1 nm on the complete wafer. To benchmark the system performance, we investigated the growth of single layer h-BN on epitaxial Rh(111) thin films. A thorough analysis of the wafer was performed after cutting in atmosphere by low energy electron diffraction, scanning tunneling microscopy, and ultraviolet and X-ray photoelectron spectroscopies. The apparatus is located in a clean room environment and delivers high quality single layers of h-BN and thus grants access to large area UHV processed surfaces, which had been hitherto restricted to expensive, small area single crystal substrates. The facility is versatile enough for customization to other UHV-CVD processes, e.g., graphene on four-inch wafers.

36 MATERIALS SCIENCE↗

Growth, structural, and magnetic properties of single-crystal full-Heusler Co 2 TiGe thin films

This paper presents the growth, structural characterization, and measurement of magnetic properties of Co 2 TiGe thin films grown by molecular beam epitaxy on insulating MgO (001) substrates and conductive lattice matched InAlAs/InGaAs/InAlAs epitaxial layers grown on n-InP (001) substrates. A GdAs diffusion barrier was used to minimize interfacial reactions during Co 2 TiGe growth on InAlAs. The surface morphology, structural quality, and magnetic behavior were examined by reflection high-energy electron diffraction, scanning tunneling microscopy, X-ray diffraction, and superconducting quantum interference device magnetometry. The results reveal high quality Co 2 TiGe thin films with a saturation magnetization of ~1.8 μ B /formula unit and a Curie temperature of ~375 K. Finally, the magnetic easy axis was found to lie in the [110] direction but magnetometry also reveals that there is only a small difference in energy between the [110] and [010] magnetization directions.

36 MATERIALS SCIENCE↗

Delamination-Assisted Ultrafast Wrinkle Formation in a Freestanding Film

Freestanding films provide a versatile platform for materials engineering thanks to additional structural motifs not found in films with a substrate. A ubiquitous example is wrinkles, yet little is known about how they can develop over as fast as a few picoseconds due to a lack of experimental probes to visualize their dynamics in real time on the nanoscopic scale. Here, we use time-resolved electron diffraction to directly observe light-activated wrinkling formation in freestanding La 2/3 Ca 1/3 MnO 3 films. Via a “lock-in” analysis of oscillations in the diffraction peak position, intensity, and width, we quantitatively reconstructed how wrinkles develop on the time scale of lattice vibration. Contrary to the common assumption of fixed boundary conditions, we found that wrinkle development is associated with ultrafast delamination at the film boundaries. Finally, our work provides a generic protocol to quantify wrinkling dynamics in freestanding films and highlights the importance of the film–substrate interaction in determining the properties of freestanding structures.

36 MATERIALS SCIENCE↗

Desorption of oxygen from alloyed Ag/Pt(111)

We have investigated the interaction of oxygen with the Ag/Pt(111) surface alloy by thermal desorption spectroscopy (TDS). The surface alloy was formed during the deposition of sub-monolayer amounts of silver on Pt(111) at 800 K and subsequent cooling to 300 K. The low-temperature phase of the surface alloy is composed of nanometer-sized silver rich stripes, embedded within platinum-rich domains, which were characterized with spot profile analysis low energy electron diffraction. The TDS measurements show that oxygen adsorption is blocked on Ag sites: the saturation coverage of oxygen decreases with increasing Ag coverage. Also, the activation energy for desorption (E{sub des}) decreases with Ag coverage. The analysis of the desorption spectra from clean Pt(111) shows a linear decay of E{sub des} with oxygen coverage, which indicates repulsive interactions between the adsorbed oxygen atoms. In contrast, adsorption on alloyed Ag/Pt(111) leads to an attractive interaction between adsorbed oxygen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast formation of a transient two-dimensional diamondlike structure in twisted bilayer graphene

Due to the absence of matching carbon atoms at honeycomb centers with carbon atoms in adjacent graphene sheets, theorists predicted that a sliding process is needed to form AA, AB', or ABC stacking when directly converting graphite into sp 3 bonded diamond. Here, using twisted bilayer graphene, which naturally provides AA and AB' stacking configurations, we report the ultrafast formation of a transient two-dimensional diamondlike structure (which is not observed in aligned graphene) under femtosecond laser irradiation. This photoinduced phase transition is evidenced by the appearance of bond lengths of 1.94 and 3.14 Å in the time-dependent differential pair distribution function using MeV ultrafast electron diffraction. Molecular dynamics and first-principles calculation indicate that sp 3 bonds nucleate at AA and AB' stacked areas in a moiré pattern. This work sheds light on the direct graphite-to-diamond transformation mechanism, which has not been fully understood for more than 60 years.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Degradation of Components After Exposure in a Biomass Pyrolysis System

X-ray diffraction, electron probe microanalysis, and scanning transmission electron microscopy with focused ion beam lift-out sample preparation techniques were used to study corrosion products in a 304L (UNS S30403) stainless steel fluidized-bed reactor segment from Iowa State University’s Pyrolysis Process Development Unit Facility. This reactor segment is particularly valuable because a detailed history of operation time, temperature, and biomass feedstock was available. As previously reported for a range of stainless steel pyrolysis-related equipment, external scaling and internal attack along alloy grain boundaries were observed. Here, the scaling was primarily associated with O, although S, Ca, K, Si, Mg, and P were also detected in the outer scale regions. However, unlike those other recent advanced characterization analyses, in this instance the internal alloy grain boundary attack was not directly related to S. Rather, only internal oxidation and localized nanoporosity were observed along the alloy grain boundaries, with associated local nanoscale Cr depletion and Ni enrichment. Mechanistic implications of this finding are discussed.

36 MATERIALS SCIENCE↗

Indium stability on InGaAs during atomic H surface cleaning

Atomic H exposure of a GaAs surface at 390 deg. C is a relatively simple method for removing the native oxides without altering the surface stoichiometry. In-situ reflection high energy electron diffraction and angle-resolved x-ray photoelectron spectroscopy have been used to show that this procedure applied to In{sub 0.2}Ga{sub 0.8}As effectively removes the native oxides resulting in an atomically clean surface. However, the bulk InGaAs stoichiometry is not preserved from this treatment. The In:Ga ratio from the substrate is found to decrease by 33%. The implications for high-mobility channel applications are discussed as the carrier mobility increases nearly linearly with the In content.

36 MATERIALS SCIENCE↗

Unexpected behaviour of one Pb monolayer deposited on aluminum oxide thin film grown on Ag(111)

Using scanning tunneling microscopy (STM), Auger electron spectroscopy, and low energy electron diffraction, we have observed a surprising complete dissolution at room temperature of one lead monolayer deposited by evaporation on an aluminum oxide thin film (∼0.8 nm thick) previously grown on Ag (111). We have observed the quasi-instantaneous diffusion of the lead deposit through the oxide layer to the silver/oxide interface. After the diffusion process, lead atoms form a Moiré superstructure, which is characterized by STM through the oxide layer. This unexpected behavior puts in light the very weak interaction between the aluminum oxide and the silver substrate.

36 MATERIALS SCIENCE↗

Growth kinetics and island evolution during double-pulsed molecular beam epitaxy of InN

The kinetic processes of InN growth using alternating source fluxes with sub-monolayer In pulses in plasma-assisted molecular beam epitaxy have been investigated. Growth at various temperatures reveals the existence of two growth regimes. While growth at low temperatures is solely governed by surface diffusion, a combination of decomposition, desorption, and diffusion becomes decisive at growth temperatures of 470 °C and above. At this critical temperature, the surface morphology changes from a grainy structure to a structure made of huge islands. The formation of those islands is attributed to the development of an indium adlayer, which can be observed via reflection high energy electron diffraction monitoring. Based on the growth experiments conducted at temperatures below T{sub Growth} = 470 °C, an activation energy for diffusion of 0.54 ± 0.02 eV has been determined from the decreasing InN island density. A comparison between growth on metalorganic vapor phase epitaxy GaN templates and pseudo bulk GaN indicates that step edges and dislocations are favorable nucleation sites. Based on the results, we developed a growth model, which describes the main mechanisms of the growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selective deposition of a crystalline Si film by a chemical sputtering process in a high pressure hydrogen plasma

The selective deposition of Si films was demonstrated using a chemical sputtering process induced by a high pressure hydrogen plasma at 52.6 kPa (400 Torr). In this chemical sputtering process, the initial deposition rate (R{sub d}) is dependent upon the substrate type. At the initial stage of Si film formation, R{sub d} on glass substrates increased with elapsed time and reached to a constant value. In contrast, R{sub d} on Si substrates remained constant during the deposition. The selective deposition of Si films can be achieved by adjusting the substrate temperature (T{sub sub}) and hydrogen concentration (C{sub H2}) in the process atmosphere. For any given deposition time, it was found that an optimum C{sub H2} exists for a given T{sub sub} to realize the selective deposition of a Si film, and the optimum T{sub sub} value tends to increase with decreasing C{sub H2}. According to electron diffraction patterns obtained from the samples, the selectively prepared Si films showed epitaxial-like growth, although the Si films contained many defects. It was revealed by Raman scattering spectroscopy that some of the defects in the Si films were platelet defects induced by excess hydrogen incorporated during Si film formation. Raman spectrum also suggested that Si related radicals (SiH{sub 2}, SiH, Si) with high reactivity contribute to the Si film formation. Simple model was derived as the guideline for achieving the selective growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A crystalline oxide passivation for Al{sub 2}O{sub 3}/AlGaN/GaN

In situ X-ray photoelectron spectroscopy and low energy electron diffraction are performed to study the formation of a crystalline oxide on the AlGaN surface. The oxidation of the AlGaN surface is prepared by annealing and remote N{sub 2} + O{sub 2} plasma pretreatments resulting in a stable crystalline oxide. The impact of the oxide on the interface state density is studied by capacitance voltage (C-V) measurements. It is found that a remote plasma exposure at 550 °C shows the smallest frequency dispersion. Crystalline oxide formation may provide a novel passivation method for high quality AlGaN/GaN devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studying the Surface Conductivity of a Thallium Bilayer on Si(111) Substrate after Adsorption of Lithium and Rubidium

Changes in the state of a thallium bilayer on Si(111) substrate, Si(111)6 × 6–Tl, after adsorption of lithium and rubidium were studied using low-energy electron-diffraction and four-point probe-conductivity measurements. New surface reconstructions 5 × 1 and 5√3×5√3 were observed after the adsorption of lithium, and 2 × 2 and √3×√3 reconstructions appeared after the adsorption of rubidium. The surface conductivity of silicon substrates was studied as a function of the dose of deposited adsorbate. It is established that the formation of both 5 × 1 and 2 × 2 reconstructions retains the conducting properties of a two-dimensional channel constituted by the thallium bilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and magnetic properties of (1 1 1)-oriented CoCr{sub 2}O{sub 4} epitaxial thin film

We report on the fabrication of high quality (1 1 1)-oriented ferrimagnetic normal spinel CoCr{sub 2}O{sub 4} epitaxial thin films on single crystal Al{sub 2}O{sub 3} substrates. The structural, electronic, and magnetic properties were characterized by in-situ reflection high energy electron diffraction, atomic force microscopy, X-ray diffraction, X-ray photoemission spectroscopy, dc magnetization measurement, and element resolved resonant X-ray magnetic scattering. The comprehensive characterization reveals that no disorder in the cation distribution or multivalency issue is present in the samples. As a result, Kagomé and triangular layers are naturally formed via this specific growth approach. These findings offer a pathway to fabricate two dimensional Kagomé heterostructures with exotic quantum many-body phenomena by means of geometrical design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of singly terminated DyScO3 (110) surfaces

We have studied the polar surface of singly terminated DyScO{sub 3} (110) crystals by reflective high-energy electron diffraction, surface x-ray diffraction and angle-resolved mass spectroscopy of recoiled ions. These techniques show that the surfaces are (1 x 1) reconstructed, which points to the absence of ordered cation vacancies at the surface. The best surfaces were obtained after a selective chemical wet etch. We suggest that for ScO{sub 2} terminated surfaces, adsorbates, or oxygen vacancies are most likely to occur in order to overcome the polarity difference between stoichiometric bulk crystal and vacuum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗