Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Doppler”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

High resolution Doppler lidar

A high resolution lidar system was implemented to measure winds in the lower atmosphere. The wind speed along the line of sight was determined by measuring the Doppler shift of the aerosol backscattered laser signal. The system in its present configuration is stable, and behaves as indicated by theoretical simulations. This system was built to demonstrate the capabilities of the detector system as a prototype for a spaceborne lidar. The detector system investigated consisted of a plane Fabry-Perot etalon, and a 12-ring anode detector. This system is generically similar to the Fabry-Perot interferometer developed for passive wind measurements on board the Dynamics Explorer satellite. That this detector system performs well in a lidar configuration was demonstrated.

Abreu, Vincent J.↗

Doppler radar with multiphase modulation of transmitted and reflected signal

A microwave radar signal is generated and split by a circulator. A phase shifter introduces a series of phase shifts into a first part of the split signal which is then transmitted by antenna. A like number of phase shifts is introduced by the phase shifter into the return signal from the target. The circulator delivers the phase shifted return signal and the leakage signal from the circulator to a mixer which generates an IF signal output at the Doppler frequency. The IF signal is amplified, filtered, counted per unit of time, and the result displayed to provide indications of target sense and range rate. An oscillator controls rate of phase shift in the transmitted and received radar signals and provides a time base for the counter. The phase shift magnitude increases may be continuous and linear or discrete functions of time.

Shores, Paul W.↗

Doppler lidar measurement of profiles of turbulence and momentum flux

A short-pulse CO2 Doppler lidar with 150-m range resolution measured vertical profiles of turbulence and momentum flux. Example measurements are reported of a daytime mixed layer with strong mechanical mixing caused by a wind speed of 15 m/sec, which exceeded the speed above the capping inversion. The lidar adapted an azimuth scanning technique previously demonstrated by radar. Scans alternating between two elevation angles allow determination of mean U-squared, V-squared, and W-squared. Expressions were derived to estimate the uncertainty in the turbulence parameters. A new processing method, partial Fourier decomposition, has less uncertainty than the filtering used earlier.

Eberhard, Wynn L.↗

Analysis of airborne Doppler lidar measurements of the extended California sea breeze

Airborne Doppler lidar data obtained by NASA near the top of the PBL in the central valley of California are analyzed. The experimental conditions and quality of the data are described. Wind vectors are produced on a geographic grid divided into 1-km square cells. The resulting wind field has features similar to those seen in ground level wind observations. It is suggested that, although the analysis is labor intensive and cumbersome, it produces a previously unattainable high-resolution depiction of air flow over a broad region.

Carroll, John J.↗

Atmospheric density remote sensing of mesosphere and thermosphere to be used for spacecraft design by adopting VHF radar and HF Doppler sounder at low latitude west Pacific site during winter time

Simultaneous observations of VHF radar and HF Doppler array systems located at Chung Li (Taiwan) are used to observe three-dimensional wind speeds and gravity waves. The density perturbations are determined at different altitudes of the mesosphere and thermosphere during weak convective motions of the cold front in the winter. The present observations are believed to be valuable for space projects dealing with the low-latitude atmosphere.

Hung, R. J.↗

SC- and SI-associated ULF and HF-Doppler oscillations during the great magnetic storm of February 1986

Results are presented of an investigation of SC- and SI-associated ULF and HF-Doppler pulsations observed during the great geomagnetic storm of February 1986, which began with a sudden commmencement on February 6 at about 13:12 UT, developed slowly over the next two days, and, after a rapid intensification late on February 8, reached a minimum. It is shown that these ULF and geomagnetic pulsations can be explained by the dynamo-motor mechanism of ionospheric electric fields and by global compressional oscillations in the magnetosphere and ionosphere, respectively.

Yumoto, K.↗

Development of a phase Doppler based probe for icing cloud droplet characterization

The development and evaluation of a compact optical fiber probe (OFP) for airborne and wind tunnel icing cloud characterizations is described. This probe was based upon the proven phase Doppler technique for measuring the size and velocity of spherical drops. Direct comparisons of the size distributions from the standard PDPA with the OFP were used to confirm the reliability of the probe. After some improvements in the fiber coupling efficiency, the number density and liquid water content data agreed to within 15 percent.

Rudoff, R. C.↗

Doppler radar observations of the evolution of a small convective storm during Cohmex

Doppler radar observations of a deep convection that developed along the Alabama-Tennesse border on July 14, 1986 are analyzed. The evolution and structure of the convective storm are examined. Two convective cores are observed and both having a radius of about 1 km and maximum reflectivities of about 5 dBz; a third cell is also detected later in the region between the northern and southern cells. It is noted that the northern cell is the most dominant possessing an updraft through the region of maximum reflectivity. Diagrams of the vertical structure of the cells are provided.

Moore, Patrick D.↗

Planned ER-2 Doppler radar (EDOP) for studying convective storms and mesoscale phenomena

A radar development is presently funded by the NASA Mesoscale Atmospheric Research Program to build an X-band Doppler radar (EDOP) for the ER-2 aircraft for measuring the structure of updrafts and downdrafts in deep convective systems. In this paper, the radar's scientific objectives and characteristics are briefly reviewed. These objectives include documentation of deep isolated thunderstorms, examination of cloud top and anvil structure, structure of microscale convective systems, cloud microphysics, and testing of satellite precipitation estimation algorithms. System specifications for the radar are given.

Heymsfield, Gerald M.↗

Doppler measurements of an interplanetary satellite with a VLBI antenna

In preparation for the Ulysses Gravitational Wave Experiment a Doppler detector has been constructed for the Bologna VLBI antenna and tested in a differential mode with the spacecraft Voyager 2 at 25 AU. In this mode the signal was sent from the Deep Space Network station in Canberra and received at Madrid and Bologna. The correlation between the received signals allows a discrimination between local and common noise sources. The successful test was performed in August, 1988 showed that special communication procedure will have to be implemented to allow a smooth and reliable operation during the real experiment.

Gomoretto, G.↗

Verification of three-dimensional laser Doppler velocimeter measurements

An experimental comparison method is proposed for the verification of mean flow and turbulence measurements obtained with a three-dimensional laser Doppler velocimeter system. Such measurements can include large errors caused by problems unique to three-dimensional systems. Direct comparisons of laser and hot cross-wire measurements obtained in two-dimensional flows, as is the common practice, will not bear out all the errors associated with three-dimensional laser systems. It is proposed here that the errors may be adequately quantified by making the direct comparisons in a weakly three-dimensional turbulent shear flow. The weak three-dimensional flow ensures high accuracy of the cross-wire data while still generating sufficiently strong secondary mean flow and Reynolds shear stress so that all the laser measurements may be fully verified. This type of shear flow is easily generated by introducing a weak streamwise vortex into a nominally two-dimensional turbulent shear layer.

Mehta, R. D.↗

Relationships between SC- and SI-associated ULF waves and ionospheric HF Doppler oscillations during the great geomagnetic storm of February 1986

The SC- and SI-associated ionospheric Doppler velocity oscillations and geomagnetic pulsations during the great geomagnetic storm of February 1986 are interpreted. This is done by considering the 'dynamo-motor' mechanism of ionospheric E-field and the global compressional oscillations of the magnetosphere and the ionosphere, respectively.

Yumoto, K.↗

Simultaneous multivelocity component laser Doppler velocimetry using one digital frequency processor

Digital frequency processing used in conjunction with optical frequency shifting is an ideal way to achieve simultaneous multivelocity component measurements in laser Doppler velocimetry. This becomes obvious once realized that multivelocity component information at different frequency offsets can be obtained directly from the composite frequency spectrum of a single-channel digital frequency processor. The approach has numerous advantages over the very popular approach of using a different laser wavelength, photodetector, and signal processor for each velocity component.

Johnson, D. A.↗

One-way return-link Doppler navigation with the Tracking and Data Satellite System (TDRSS) - The ultrastable oscillator (USO) experiment on the Cosmic Background Explorer (COBE)

The principal objectives of the USO experiment on the COBE spacecraft are defined, and results of space qualification studies for the COBE USO experiment are summarized. The principal objectives of the experiment are: (1) to determine flight performance of the USO coupled to the second-generation TDRSS transponder; (2) space qualify TDRSS noncoherent one-way return-link Doppler tracking; and (3) analyze algorithms for one-way navigation with real data. The three objectives of the experiment have been met in the first stage of the experiment analysis.

Dunham, J. B.↗

Estimating SAR Doppler Shifts From Homogeneous Targets

Algorithm that processes some of information in synthetic-aperture-radar (SAR) echoes from homogeneous targets yields optimal estimates of Doppler frequency shifts. Helps in further processing to extract as much information as possible about targets. Used to improve radiometric calibrations, to estimate direction of radar antenna, and to determine speeds of moving targets more accurately. Also helpful in measurements of speeds of ocean currents and of wind shears at airports.

Jin, Michael Y.↗

Ambiguity Of Doppler Centroid In Synthetic-Aperture Radar

Paper discusses performances of two algorithms for resolution of ambiguity in estimated Doppler centroid frequency of echoes in synthetic-aperture radar. One based on range-cross-correlation technique, other based on multiple-pulse-repetition-frequency technique.

Chang, Chi-Yung↗

Clutter filter design considerations for Airborne Doppler radar detection of windshear

The problem of clutter rejection when processing down-looking Doppler radar returns from a low altitude airborne platform is a paramount problem. With radar as a remote sensor for detecting and predicting windshear in the vicinity of an urban airport, dynamic range requirements can exceed 50 dB because of high clutter to signal ratios. This presentation describes signal processing considerations in the presence of distributed and/or discrete clutter interference. Previous analyses have considered conventional range cell processing of radar returns from a rigidly mounted radar platform using either the Fourier or the pulse-pair method to estimate average windspeed and windspeed variation within a cell. Clutter rejection has been based largely upon analyzing a particular environment in the vicinity of the radar and employing a variety of techniques to reduce interference effects including notch filtering, Fourier domain line editing, and use of clutter maps. For the airborne environment the clutter characteristics may be somewhat different. Conventional clutter rejection methods may have to be changed and new methods will probably be required to provide useful signal to noise ratios. Various considerations are described. A major thrust has been to evaluate the effect of clutter rejection filtering upon the ability to derive useful information from the post-filter radar data. This analysis software is briefly described. Finally, some ideas for future analysis are considered including the use of adaptive filtering for clutter rejection and the estimation of windspeed spatial gradient directly from radar returns as a means of reducing the effects of clutter on the determination of a windshear hazard.

Baxa, Ernest G., Jr.↗