Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Distributed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

A Scalable Transmission and Distribution Co-simulation Platform for IBR-heavy Power Systems

The integration of Inverter-Based Resources (IBRs) into power systems, including both transmission and distribution networks, poses challenges for studying grid dynamic behaviours under various operating conditions and system events. This paper addresses the urgent need to investigate the influence of IBRs on grid dynamics, and their potential to enhance power system reliability and resilience. We propose a flexible, scalable transmission and distribution co-simulation platform, using opensource tools only for assessing the impact of grid-following (GFL) and grid-forming (GFM) IBRs on dynamic stability at various renewable penetration levels (up to 100%). This platform enables researchers to explore different contingencies at transmission, distribution, or both, providing a comprehensive evaluation of grid status. A series of case studies, including both small and large T&D systems with varying GFL/GFM configurations and contingencies, have been conducted. The results not only robustly validate our co-simulation framework, but also provide invaluable insights for effective IBR management in the power grid.

grid management↗

Measurements of Angular Distributions of Drell-Yan Dimuons in $p+p$ and $p+d$ Interactions at 120 GeV/$c$

We present experimental results on the angular distributions of Drell-Yan muons produced by a 120 GeV/$c$ proton beam interacting with liquid hydrogen and deuterium targets. The dimuon angular distributions in both polar ($θ$) and azimuthal ($ϕ$) angles in the Collins-Soper frame are measured within the kinematic range of $4.5 < m_{μμ} < 10\ \mathrm{GeV}/c^2$, $0.19 < p_T < 2.24\ \mathrm{GeV}/c$, and $0 < x_F < 0.95$. Unlike the results of a previous proton-induced Drell-Yan experiment at a higher energy, the data reveal a pronounced $\cos 2ϕ$ modulation in the angular distributions. Comparison with perturbative QCD (pQCD) predictions shows statistically significant deviations, with p-values of 3.5% for the $p+p$ and 1.5% for the $p+d$ Drell-Yan processes. These results suggest the presence of nonperturbative QCD contributions.

Nagai, K. [Christian Brothers U.; Los Alamos; Taiw↗

Distributed Wind Summit ResDEEDs Presentation

Distributed wind listening session powerpoint presentation material, outlining to a general audience familiar with distributed wind why resiliency matters to distributed design and how the INL-developed ResDEEDs tool can be used to aid in resilient design.

overview↗

Towards unpolarized GPDs from pseudo-distributions

We present an exploration of the unpolarized isovector proton generalized parton distributions (GPDs) H u−d (x, ξ, t) and E u−d (x, ξ, t) in the pseudo-distribution formalism using distillation. Taking advantage of the large kinematic coverage made possible by this approach, we present results on the moments of GPDs up to the order x 3 — including their skewness dependence — at a pion mass m π = 358 MeV and a lattice spacing a = 0.094 fm.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probabilistic impact of electricity tariffs on distribution grids considering adoption of solar and storage technologies

This study models the role of electricity tariffs on the long-term adoption of photovoltaic and storage technologies as well as the consequent impact on the distribution grid. An adoption model that captures the economic rationality of tariff-driven investments and considers the stochastic nature of individual consumers’ decisions is proposed. This model is then combined with a probabilistic load flow to evaluate the long-term impacts of the adoption on the voltage profiles of the distribution grid. To illustrate the methodology, different components of the electricity tariffs, including solar compensation mechanisms and time differentiation of Time-of-Use (ToU) rates, are evaluated, using a case study involving a section of a medium-voltage network with 118 nodes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Extended convex hull-based distributed optimal energy flow of integrated electricity-gas systems

Integrated electricity and gas systems are constructed to facilitate the gas-fired generation, and the distributed operation of these integrated systems have received much attention due to the increased emphasis on data security and privacy between different agencies. This paper proposes an extended convex hull based method to address optimal energy flow problems for the integrated electricity and gas systems in a distributed manner. First, a multi-block electricity-gas system model is constructed by dividing the whole system into N blocks considering both physical and regional differences. This multi-block model is then convexified by replacing the nonconvex gas transmission equation with the extended convex hull-based constraints. The Jacobi-Proximal alternating direction method of multipliers algorithm is adopted to solve the convexified model and minimize its operation cost. Finally, the feasibility of the optimal solution for the convexified model is checked, and a sufficient condition is developed. If the sufficient condition is satisfied, the optimal solution for the original nonconvex problem can be recovered from that for the convexified problem. Simulation results demonstrate that the proposed method is tractable and effective in obtaining feasible optimal solutions for multi-block optimal energy flow problems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Model-Free Voltage Control of Active Distribution System with PVs Using Surrogate Model-Based Deep Reinforcement Learning

Accurate knowledge of the distribution system topology and parameters is required to achieve good voltage control performance, but this is difficult to obtain in practice. This paper proposes a physical-model-free voltage control method based on a surrogate-model-enabled deep reinforcement learning approach. Specifically, a surrogate model is trained in a supervised manner using the recorded limited number of historical data to learn the relationship between the power injections and voltage fluctuations of each node. Then, the deep reinforcement learning algorithm is applied to learn an optimal control strategy from the experiences obtained by continuous interactions with the surrogate model. The proposed method can achieve physical-model-free control of unbalanced distribution network and inform real-time decisions to deal with fast voltage fluctuations caused by the rapid variation of PV generation. Simulation results on an unbalance IEEE 123-bus system show that the proposed method can achieve similar performance as that of perfect physical-model-based approaches while being advantageous over other traditional methods.

active distribution network↗

Spatio-temporal impacts of a utility’s efficiency portfolio on the distribution grid

Energy Efficiency has historically focused on delivering savings to offset growth in energy supply. Today’s growing emphasis on decarbonization of the energy supply is driving renewables adoption and increased interest in electrification. As a result, energy efficiency is being assessed not just in its ability to offset load growth, but also for its ability to alleviate location-specific constraints on transmission and distribution infrastructure. This work demonstrates that advanced measurement and verification modeling techniques can be used to estimate the spatio-temporal grid impact of a portfolio of energy efficiency programs. It extends measurement-based methods to an entire Demand Side Management portfolio and uses a single model to predict annual as well as seasonal building energy use with near-zero bias. In addition, new metrics are introduced to assess grid level impacts of energy efficiency. The results show that the efficiency program portfolio delivers savings of over 12% at the territory-wide proxy level, with substation and feeder level savings ranging from 0.4% to 26%, and ~5%-42% respectively. Overall, these savings impacted 1.0%–1.4% of the energy used at these locations in the grid. This work provides a methodology with potential to connect efficiency with distribution planning, carrying implications for non-wires alternatives and targeted delivery of efficiency programs.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DINGO: Digital assistant to grid operators for resilience management of power distribution system

With increasing adverse weather events and disasters, enabling resiliency of the power distribution system (PDS) is becoming increasingly important. Here in this work, resiliency is defined as the systems ability to keep supplying critical loads even with multiple contingencies. Resiliency may depend on: (a) advanced tools to assist operators in situational awareness and decision making with the increasing volume of data generated by the PDS, (b) visualization and ease of interaction with system resources and information, especially during extreme events and resulting human operator stress, and (c) flexible resources and autonomous control. Operators and support engineers need to interact with the system for key information and take action under stress, given the requirement for decisions in a short time. Integrated technological solutions are prevailing steps to support the most appropriate decision during critical times to serve essential loads. In order to meet the required goals, a Real-time Resiliency Monitoring and Operational Decision Support (RT-RMOD) tool have been developed. It supports various functionalities, including real-time monitoring, resilience assessment, and proactive decision support. However, this work makes advanced feature additions to the tool by developing data-enabled resilience management algorithms for (i) outage detection and localization, (ii) Resiliency-metric driven restoration and reconfiguration, and (iii) NLP based digital assistant for operators called DINGO (DIgital assistaNt to Grid Operators) to interact with Advanced Distribution Management System (ADMS) and RT-RMOD. The developed algorithm was validated for multiple cases of weather events using a real-world, off-grid microgrid system modeled in a real-time simulator, sensor data, and software tools.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Automatic voltage regulation application for PV inverters in low-voltage distribution grids – A digital twin approach

This paper proposes a hierarchical coordinated control strategy for PV inverters to keep voltages in low-voltage (LV) distribution grids within specified limits. The top layer of the proposed architecture consists of the designed automatic voltage regulation (AVR) application, which has access to voltage measurements and grid parameters from the LV distribution grid, both current and historical. The AVR application solves a constrained optimization problem, which provides a set of local control set-points that bring the voltage across the grid within bounds. The middle layer consists of a local Volt/VAR controller, which is adjusted by the AVR app, while the bottom layer is the inner-loop controller of the PV inverter. The proposed method not only improves the voltage quality in the grid but also manages the reactive power outputs of PV inverters efficiently. Further, a digital twin of the cyber-physical system has also been employed that interacts with the control system to ensure its appropriate operation. The effectiveness of the proposed methodology is demonstrated on a representative low-voltage feeder located in Denmark.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Comparison of fiber-optic distributed temperature sensing and high-sensitivity sensor spatial surveying of stream temperature

Measuring surface water temperature spatial variability is needed to estimate the interaction between surface water and groundwater, evaluate fish habitat and thermal inertia, and to estimate streamflow frequency and duration. Fiber optic distributed temperature sensing (FO-DTS) has been used in rivers and lakes, providing high-resolution and sensitive temperature monitoring over large temporal and spatial scales. However, in streams with cobbly or bedrock-lined streambeds and variable bathymetry, use of FO-DTS to measure temperature close to the surface water and groundwater interface can be challenging if even feasible. FO-DTS can also be costly, involve difficult installations, and require an advanced understanding of the technology, calibration, and data processing. In this study, we compared FO-DTS stream temperature survey results to an alternative temperature survey method employing a towed transect of high-resolution temperature loggers spaced at 1-m and transported in the stream along the study reach, to measure the spatial distribution of stream-water temperature in East Fork Poplar Creek near Oak Ridge, Tennessee, USA. We assessed the applicability and limitations of the two methods, and quantitatively compared in-situ temperature survey results measured simultaneously with each method. Regression results showed strong temporal and spatial correlation between the two methods. Differences were only elevated near the stream banks in areas that were coincident with correlation slope deviations from unity, which was attributed to shallower water and lower data density. Kriging standard errors were also low at channel center with minor increases near the stream banks. Furthermore, the results suggested that the array of the individual temperature sensors can provide a practical alternative to FO-DTS for thermal characterization of surface water, providing slightly lower spatial and temporal resolution, but with higher accuracy of temperature measurement, with greater simplicity, and with a broader range of conditions where it may be applied.

54 ENVIRONMENTAL SCIENCES↗

Sensitivity-based voltage constraints for optimal power flow in low-voltage distribution feeders

The optimal power flow (OPF) problem for distribution systems can include network details down to the low-voltage (LV) points of interconnection of individual customers. This paper addresses the implementation of voltage magnitude constraints, and sets forth a practicable approach for capturing the effects on voltage from the switching behavior of loads (e.g., heat pumps, air conditioners, water heaters, or pool pumps) and from the variability of renewable generation (e.g., rooftop solar). The proposed method adjusts the OPF voltage constraints based on forecasts of load and generation upper and lower bounds, in conjunction with sensitivity factors derived from the power flow equations. An illustrative OPF formulation is also provided, which incorporates transformer models that include core loss. We demonstrate that accurate modeling of these LV network components is critical to avoid voltage violations at customer points of interconnection. Furthermore, the ideas are validated through numerical case studies on a realistic distribution feeder.

24 POWER TRANSMISSION AND DISTRIBUTION↗

River Dynamics Control Transit Time Distributions and Biogeochemical Reactions in a Dam-Regulated River Corridor

Residence Time Distributions (RTDs) exert an important control on biogeochemical translation in the hydrological systems. Previous tracer studies have revealed that RTDs often followed time-invariant exponential, lognormal, or heavy-tailed RTDs that have power-law behavior for long tails in headwater or low-order streams. However, there is a recognition that RTDs can be more complicated and time-variable in response to dynamic hydrological forcing. Here, we use particle tracking to estimate RTDs along the Hanford Reach of the Columbia River and to quantify the influences of river stage fluctuations. Particle tracking is conducted using the velocity field from high-resolution 3D groundwater flow simulations. The effects of hydrological forcing on the residence time distribution were evaluated by varying river flow boundary conditions and releasing particles in different time windows. Our results revealed that dynamic stage fluctuations created rapidly changing losing-gaining conditions in the river and led to highly transient RTDs, which contributes to multiple modes of RTDs. Dam-induced high-frequency (sub-daily) flow variation contributes to the short-time (sub-daily) component of the RTDs. Deviation of the reactant consumption under the single-mode assumption compared to the multimodal RTDs is relatively small (~5%) and appears when the Damköhler number was close to one.More specifically, high-frequency (daily) dam-induced stage variations have higher impacts on biogeochemical reactions with faster reaction rate, and can potentially increase the reactant consumption by 26.68%. Based on these findings, we suggest that current river basin models could be improved by including bank storage and more complex RTDs influenced by both short and long term river stage fluctuations.

54 ENVIRONMENTAL SCIENCES↗

Modeling the Effects of Artificial Drainage on Agriculture-Dominated Watersheds Using a Fully Distributed Integrated Hydrology Model

In agriculture-dominated watersheds where natural drainage is poor, agricultural ditches (narrow engineered channels) and tile drains (perforated pipes) are widely employed to enhance surface and subsurface drainage, respectively. Despite their relatively small scale, these features exert substantial control over the hydro-biogeochemical function of watersheds and their effects need to be represented in the models. We introduce a novel strategy to incorporate the effects of artificial agricultural drainage into a fully distributed basin-scale integrated surface-subsurface hydrology models. In our approach, narrow agriculture ditches for surface drainage are resolved efficiently using ditch-aligned computational meshes that are hydrologically conditioned to ensure connectivity in the stream/ditch network. For tile drainage in the subsurface, we use the physically based Hooghoudt's drainage equation as a subgrid model and route the water drained through tiles to the nearest ditch. Without site-specific calibration, this model reproduced observed streamflow in the Portage River Watershed (>1,000 km 2 ) as recorded by a USGS gauge with good accuracy (normalized KGE = 0.81) and outperformed a calibrated SWAT model (normalized KGE = 0.68). Numerical experiments confirm that artificial drainage reduces surface inundations and effectively controls the water table. At the watershed scale, artificial drainage increases baseflow but has little effect on watershed discharges above the 90th percentile. The strong physical underpinnings and reduced need for calibration allow us to study the impacts of artificial drainage on distributed hydrological response in terms of fluxes and states and provide a platform for investigating watershed-scale nutrient transport.

54 ENVIRONMENTAL SCIENCES↗

Authentication of smart grid communications using quantum key distribution

Smart grid solutions enable utilities and customers to better monitor and control energy use via information and communications technology. Information technology is intended to improve the future electric grid’s reliability, efficiency, and sustainability by implementing advanced monitoring and control systems. However, leveraging modern communications systems also makes the grid vulnerable to cyberattacks. Here we report the first use of quantum key distribution (QKD) keys in the authentication of smart grid communications. In particular, we make such demonstration on a deployed electric utility fiber network. The developed method was prototyped in a software package to manage and utilize cryptographic keys to authenticate machine-to-machine communications used for supervisory control and data acquisition (SCADA). This demonstration showcases the feasibility of using QKD to improve the security of critical infrastructure, including future distributed energy resources (DERs), such as energy storage.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Double-sided electron energy analyzer for measurement of non-Maxwellian electron energy distributions

Here, a double-sided electron energy analyzer is developed for studies of magnetic reconnection. It can measure electron energy distribution functions along two directions opposite to each other at the same time. Each side is composed of a floating reference grid, an energy selector grid, and a collector plate. The voltage of the selector grid is swept from –40 to 0 V with respect to the reference grid with a frequency of 1 MHz. This fast sweeping is required to resolve sub-Alfvénic changes in plasma quantities of the Magnetic Reconnection Experiment, where the typical Alfvénic time is a few microseconds. The reliability of the energy analyzer is checked in Maxwellian plasmas away from the reconnection region. In this case, the electron temperature computed from the electron energy distribution function agrees with measurements of a reference triple Langmuir probe. When it is located near the reconnection region, the temperatures of the tail electron population from both sides, facing into the electron flow and facing away from it, exceed the bulk electron temperature measured by the Langmuir probe by a factor of about 2.

47 OTHER INSTRUMENTATION↗

Lattice QCD Benchmark of Proton Helicity and Flavor-Dependent Unpolarized Transverse Momentum-Dependent Parton Distribution Functions at Physical Quark Masses

We present the first lattice QCD calculations of the isovector helicity transverse momentum-dependent parton distribution function (TMDPDF) and the flavor-dependent unpolarized TMDPDFs for up and down quarks in the proton. Our computations utilize domain-wall fermion discretization with physical quark masses. Employing Coulomb-gauge-fixed quark correlation functions within the large-momentum effective theory framework, we access nonperturbative transverse quark separations 𝑏 𝑇 up to approximately 1 fm, corresponding to transverse momenta as low as 200 MeV. Based on the quasi-TMD factorization theorem, we construct renormalization-group–invariant ratios that are equal to the corresponding light-cone TMDPDF ratios. At moderate 𝑥, our results reveal that the isovector helicity and unpolarized TMDPDFs exhibit nearly identical transverse structure up to a normalization factor, and the unpolarized distributions display only mild flavor dependence. These findings not only support key trends observed in recent global analyses but also provide robust, nonperturbative constraints that can distinguish between different parameterizations. This Letter establishes a first-principles benchmark for TMDPDFs, offering valuable input for ongoing and future experimental efforts to map the proton’s three-dimensional structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantum Key Distribution Applicability to Smart Grid Cybersecurity Systems

To meet the increasing demand for electricity and to have a more reliable and resilient electric grid against conventional and extreme events, grid modernization is more crucial now than ever before. This will require the development and deployment of devices that provide advanced communication capabilities. The overall efficiency, reliability, and resilience of the smart grid will be inextricably linked to the exchange of information between these devices. Unfortunately, the increased information flow will increase the potential attack surface and introduce new vulnerabilities. While a smarter grid will depend critically on information flow, these benefits will be accrued only if that information can be protected. Nowadays, information is secured in smart grids primarily through cryptography. However, with the increasing number of sophisticated attacks as well as the increasing computational power, the security of the “classical” cryptographic algorithms is threatened. Quantum information science offers solutions to this problem, specifically quantum key distribution (QKD), which provides a means for the generation and secure distribution of symmetric cryptographic keys. The security of QKD stems ultimately from the very nature of quantum physics. In this paper, we investigate the applicability of QKD to the various smart grid sectors and specific use cases. We have identified 18 smart grid use cases of interest for QKD suitability together with 7 QKD factors used for the assessment of the various use cases. For each use case, the impact to security of the loss of confidentiality, integrity, and/or availability is specified. In addition, the suitability of QKD is assessed for each use case with respect to multiple factors.

24 POWER TRANSMISSION AND DISTRIBUTION↗