Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

A Seafloor Microbial Biome Hosted within Incipient Ferromanganese Crusts

Unsedimented volcanic rocks exposed on the seafloor at ridge systems and Seamounts host complex, abundant and diverse microbial communities that are relatively cosmopolitan in distribution (Lysnes, Thorseth et al. 2004; Mason, Stingl et al. 2007; Santelli, Orcutt et al. 2008). The most commonly held hypothesis is that the energy released by the hydration, dissolution and oxidative alteration of volcanic glasses in seawater drives the formation of an ocean crust biosphere (Thorseth, Furnes et al. 1992; Fisk, Giovannoni et al. 1998; Furnes and Staudigel 1999). The combined thermodynamically favorable weathering reactions could theoretically support anywhere from 105 to 109 cells/gram of rock depending upon the metabolisms utilized and cellular growth rates and turnover (Bach and Edwards 2003; Santelli, Orcutt et al. 2008). Yet microbially-mediated basalt alteration and energy conservation has not been directly demonstrated on the seafloor. By using synchrotron-based x-ray microprobe mapping, x-ray absorption spectroscopy and high-resolution scanning and transmission electron microscopy observations of young volcanic glasses recovered from the outer flanks of Loihi Seamount, we intended to identify the initial rates and mechanisms of microbial basalt colonization and bioalteration. Instead, here we show that microbial biofilms are intimately associated with ferromanganese crusts precipitating onto basalt surfaces from cold seawater. Thus we hypothesize that microbial communities colonizing seafloor rocks are established and sustained by external inputs of potential energy sources, such as dissolved and particulate Fe(II), Mn(II) and organic matter, rather than rock dissolution.

58 GEOSCIENCES↗

Controlling the size distribution of embedded Au nanoparticles using ion irradiation

Samples composted of chemically synthesized Au nanoparticles (NPs) (16.0{+-}2.0 nm) embedded within a planar silica film are used as model system to investigate the evolution of a second phase under irradiation when the temperature and the ion stopping power are changed. Samples are irradiated with 4 MeV Au{sup 2+} ions and 4 MeV Br{sup 2+} ions for temperature ranging from 30 deg. C up to 800 deg. C and for fluences up to 8x10{sup 16} cm{sup -2}. We show that at room temperature the complete dissolution of the NPs leads to the formation of smaller precipitates with a narrower size distribution, i.e., 2.0{+-}0.3 nm. However, when the temperature is increased and/or the nuclear stopping power is decreased, a reduction in the dissolution rate was observed. This leads to the formation of a bimodal size distribution. Finally, the evolution of the density of the precipitates with the temperature is discussed in term of the thermal stability of the irradiation-induced defects within the silica matrix.

36 MATERIALS SCIENCE↗

Alloy Semiconductor Crystal Growth Under Microgravity

Microgravity studies on the dissolution and crystallization of In{sub x}Ga{sub 1-x}Sb have been done using a sandwich combination of InSb and GaSb as the starting material using the Chinese recoverable satellite. The same type of experiment was performed under 1G gravity condition for comparison. From these experiments and the numerical simulation, it is found that the shape of the solid/liquid interface and composition profile in the solution was found to be significantly affected by gravity. GaSb seed was dissolved faster than GaSb feed even though the GaSb feed temperature was higher than that of GaSb seed temperature. These results clearly indicate that solute transport due to gravity affects dissolution and growth processes of alloy semiconductor bulk crystals.

36 MATERIALS SCIENCE↗

Chronocoulometry for quantitative control of mass removal in micro-structures and sensors

In this work, tungsten wires have been etched in a KOH electrolyte solution. Based on the oxidation state of the electrolytic dissolution reaction's product and time integration of the Faradaic current produced during the reaction, this method is capable of providing a direct measurement of the change in mass of a structure from anodic dissolution. To assess the application of this process for controlled mass removal spanning sub-micrograms to milligrams, two experimental studies and accompanying uncertainty analyses have been undertaken. In the first of these, 5 tungsten wires of length 30 mm were used to remove mass values ranging from 50 to 350 {mu}g. Uncertainty estimates indicate relative combined standard uncertainties of less than 0.3% in the mass changes determined from the measurement of Faradaic current. Comparison of the mass change determined using the electrolytic method, and using a precision ultra-microbalance agreed within this uncertainty. The charge-based method was then applied to modify the dynamic characteristics of a quartz tuning fork oscillator. In these experiments, tungsten fiber attached to one tine of the oscillator was etched in 5 {mu}g increments up to 120 {mu}g of total removed mass. In general, frequency shifts of 2.8 Hz{center_dot}{mu}g{sup -1} were observed, indicating sub-microgram resolution for the characterization of probes based on frequency shift and charge-based mass measurement. Taken together, this study provides the basis for a precision method for determining changes in mass based on electrical measurements from an electrochemical system. The utility of this technique is demonstrated through controlled modification of the dynamic properties of a mechanical oscillator.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cooling rate and size effects on the medium-range structure of multicomponent oxide glasses simulated by molecular dynamics

A set of molecular dynamics simulations were performed to investigate the effect of cooling rate and system size on the medium-range structure of melt-derived multicomponent silicate glasses, represented by the quaternary 45S5 Bioglass composition. Given the significant impact of the glass degradation on applications of these materials in biomedicine and nuclear waste disposal, bulk structural features which directly affect the glass dissolution process are of particular interest. Connectivity of the silicate matrix, ion clustering and nanosegregation, distribution of ring and chain structural patterns represent critical features in this context, which can be directly extracted from the models. A key issue is represented by the effect of the computational approach on the corresponding glass models, especially in light of recent indications questioning the suitability of conventional MD approaches (that is, involving melt-and-quench of systems containing ∼10{sup 3} atoms at cooling rates of 5-10 K/ps) when applied to model these glasses. The analysis presented here compares MD models obtained with conventional and nonconventional cooling rates and system sizes, highlighting the trend and range of convergence of specific structural features in the medium range. The present results show that time-consuming computational approaches involving much lower cooling rates and/or significantly larger system sizes are in most cases not necessary in order to obtain a reliable description of the medium-range structure of multicomponent glasses. We identify the convergence range for specific properties and use them to discuss models of several glass compositions for which a possible influence of cooling-rate or size effects had been previously hypothesized. The trends highlighted here represent an important reference to obtain reliable models of multicomponent glasses and extract converged medium-range structural features which affect the glass degradation and thus their application in different fields. In addition, as a first application of the present findings, the fully converged structure of the 45S5 glass was further analyzed to shed new light on several dissolution-related features whose interpretation has been rather controversial in the past.

36 MATERIALS SCIENCE↗

Clean surface processing of rubrene single crystal immersed in ionic liquid by using frequency modulation atomic force microscopy

Surface processing of a rubrene single crystal immersed in ionic liquids is valuable for further development of low voltage transistors operated by an electric double layer. We performed a precise and clean surface processing based on the tip-induced dissolution of rubrene molecules at the ionic liquid/rubrene single crystal interfaces by using frequency modulation atomic force microscopy. Molecular resolution imaging revealed that the tip-induced dissolution proceeded via metastable low density states derived from the anisotropic intermolecular interactions within the crystal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Capping layer growth rate and the optical and structural properties of GaAsSbN-capped InAs/GaAs quantum dots

Changing the growth rate during the heteroepitaxial capping of InAs/GaAs quantum dots (QDs) with a 5 nm-thick GaAsSbN capping layer (CL) strongly modifies the QD structural and optical properties. A size and shape transition from taller pyramids to flatter lens-shaped QDs is observed when the CL growth rate is decreased from 1.5 to 0.5 ML/s. This indicates that the QD dissolution processes taking place during capping can be controlled to some extent by the GaAsSbN CL growth rate, with high growth rates allowing a complete preservation of the QDs. However, the dissolution processes are shown to have a leveling effect on the QD height, giving rise to a narrower size distribution for lower growth rates. Contrary to what could be expected, these effects are opposite to the strong blue-shift and improvement of the photoluminescence (PL) observed for higher growth rates. Nevertheless, the PL results can be understood in terms of the strong impact of the growth rate on the Sb and N incorporation into the CL, which results in lower Sb and N contents at higher growth rates. Besides the QD-CL band offsets and QD strain, the different CL composition alters the band alignment of the system, which can be transformed to type-II at low growth rates. These results show the key role of the alloyed CL growth parameters on the resulting QD properties and demonstrate an intricate correlation between the PL spectra and the sample morphology in complex QD-CL structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

KOH based selective wet chemical etching of AlN, Al{sub x}Ga{sub 1−x}N, and GaN crystals: A way towards substrate removal in deep ultraviolet-light emitting diode

A controllable and smooth potassium hydroxide-based wet etching technique was developed for the AlGaN system. High selectivity between AlN and Al{sub x}Ga{sub 1−x}N (up to 12×) was found to be critical in achieving effective substrate thinning or removal for AlGaN-based deep ultraviolet light emitting diodes, thus increasing light extraction efficiency. The mechanism of high selectivity of AlGaN as a function of Al composition can be explained as related to the formation and dissolution of oxide/hydroxide on top of N-polar surface. Cross-sectional transmission electron microscopic analysis served as ultimate proof that these hillocks were not related to underlying threading dislocations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

pH-oscillations in the bromate–sulfite reaction in semibatch and in gel-fed batch reactors

The simplest bromate oxidation based pH-oscillator, the two component BrO{sub 3}{sup −}–SO{sub 3}{sup 2–} flow system was transformed to operate under semibatch and closed arrangements. The experimental preconditions of the pH-oscillations in semibatch configuration were predicted by model calculations. Using this information as guideline large amplitude (ΔpH∼3), long lasting (11–24 h) pH-oscillations accompanied with only a 20% increase of the volume in the reactor were measured when a mixture of Na{sub 2}SO{sub 3} and H{sub 2}SO{sub 4} was pumped into the solution of BrO{sub 3}{sup −} with a very low rate. Batch-like pH-oscillations, similar in amplitude and period time appeared when the sulfite supply was substituted by its dissolution from a gel layer prepared previously in the reactor in presence of high concentration of Na{sub 2}SO{sub 3}. The dissolution vs time curve and the pH-oscillations in the semibatch and closed systems were successfully simulated. Due to the simplicity in composition and in experimental technique, the semibatch and batch-like BrO{sub 3}{sup −}–SO{sub 3}{sup 2–} pH-oscillators may become superior to their CSTR (continuous flow stirred tank reactor) version in some present and future applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reversible migration of silver on memorized pathways in Ag-Ge{sub 40}S{sub 60} films

Reversible and reproducible formation and dissolution of silver conductive filaments are studied in Ag-photodoped thin-film Ge{sub 40}S{sub 60} subjected to electric fields. A tip-planar geometry is employed, where a conductive-atomic-force microscopy tip is the tip electrode and a silver patch is the planar electrode. We highlight an inherent “memory” effect in the amorphous chalcogenide solid-state electrolyte, in which particular silver-ion migration pathways are preserved “memorized” during writing and erasing cycles. The “memorized” pathways reflect structural changes in the photodoped chalcogenide film. Structural changes due to silver photodoping, and electrically-induced structural changes arising from silver migration, are elucidated using Raman spectroscopy. Conductive filament formation, dissolution, and electron (reduction) efficiency in a lateral device geometry are related to operation of the nano-ionic Programmable Metallization Cell memory and to newly emerging chalcogenide-based lateral geometry MEMS technologies. The methods in this work can also be used for qualitative multi-parameter sampling of metal/amorphous-chalcogenide combinations, characterizing the growth/dissolution rates, retention and endurance of fractal conductive filaments, with the aim of optimizing devices.

36 MATERIALS SCIENCE↗

An atomistically informed mesoscale model for growth and coarsening during discharge in lithium-oxygen batteries

An atomistically informed mesoscale model is developed for the deposition of a discharge product in a Li-O{sub 2} battery. This mescocale model includes particle growth and coarsening as well as a simplified nucleation model. The model involves LiO{sub 2} formation through reaction of O{sub 2}{sup −} and Li{sup +} in the electrolyte, which deposits on the cathode surface when the LiO{sub 2} concentration reaches supersaturation in the electrolyte. A reaction-diffusion (rate-equation) model is used to describe the processes occurring in the electrolyte and a phase-field model is used to capture microstructural evolution. This model predicts that coarsening, in which large particles grow and small ones disappear, has a substantial effect on the size distribution of the LiO{sub 2} particles during the discharge process. The size evolution during discharge is the result of the interplay between this coarsening process and particle growth. The growth through continued deposition of LiO{sub 2} has the effect of causing large particles to grow ever faster while delaying the dissolution of small particles. The predicted size evolution is consistent with experimental results for a previously reported cathode material based on activated carbon during discharge and when it is at rest, although kinetic factors need to be included. The approach described in this paper synergistically combines models on different length scales with experimental observations and should have applications in studying other related discharge processes, such as Li{sub 2}O{sub 2} deposition, in Li-O{sub 2} batteries and nucleation and growth in Li-S batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ neutron scattering study of nanoscale phase evolution in PbTe-PbS thermoelectric material

Introducing nanostructural second phases has been proved to be an effective approach to reduce the lattice thermal conductivity and thus enhance the figure of merit for many thermoelectric materials. Furthermore studies of the formation and evolution of these second phases are central to understanding temperature dependent material behavior, improving thermal stabilities, as well as designing new materials. We examined powder samples of PbTe-PbS thermoelectric material using in situ neutron diffraction and small angle neutron scattering (SANS) techniques from room temperature to elevated temperature up to 663 K, to explore quantitative information on the structure, weight fraction, and size of the second phase. Neutron diffraction data showed the as-milled powder was primarily solid solution before heat treatment. During heating, PbS second phase precipitated out of the PbTe matrix around 480 K, while re-dissolution started around 570 K. The second phase remained separated from the matrix upon cooling. Furthermore, SANS data indicated there are two populations of nanostructures. The size of the smaller nanostructure increased from initially 5 nm to approximately 25 nm after annealing at 650 K, while the size of the larger nanostructure remained unchanged. Our study demonstrated that in situ neutron techniques are effective means to obtain quantitative information to study temperature dependent nanostructural behavior of thermoelectrics and likely other high-temperature materials.

36 MATERIALS SCIENCE↗

Equilibrating Nanoparticle Monolayers Using Wetting Films

Monolayers of bimodal gold nanoparticles on silicon are investigated by a combination of microscopy (dry monolayers) and x-ray diffraction (dry and wet monolayers). In the presence of an excess of small particles, the nanoscale packing structure closely resembles the small-particle-rich scenario of the structural crossover transition that has been predicted and also observed with micron-scale hard-sphere colloids. Structural morphology is monitored in situ during monolayer dissolution and reassembly within the thin liquid wetting film. This approach allows investigation of size and solvent effects on nanoparticles in quasi-two-dimensional confinement.

nanoparticle, wetting, self-assembly↗

Evaluation of the diffusion coefficient of fluorine during the electropolishing of niobium

Future accelerators require unprecedented cavity performance, which is strongly influenced by interior surface nano-smoothness. Electropolishing (EP) is the technique of choice being developed for high–field SRF cavities. Previous study has shown that the mechanism of Nb electropolishing proceeds by formation and dissolution of a compact salt film under fluorine diffusion-limited mass transport control. We pursue an improved understanding of the microscopic conditions required for optimum surface finishing. The viscosity of the standard electrolyte has been measured using a commercial viscometer, and the diffusion coefficient of fluorine was derived at a variety of temperatures from 0ºC to 50ºC using an Nb rotating disk electrode. In addition, data indicate that electrode kinetics becomes competitive with the mass transfer current limitation and increases dramatically with temperature. These findings are expected to guide the optimization of EP process parameters for achieving controlled, reproducible and uniform nano-smooth surface finishing of SRF cavities.

43 PARTICLE ACCELERATORS↗

A Flow-Through Reaction Cell that Couples Time - Resolved Analysis

A non-metallic flow-through reaction cell is described, designed for in situ time-resolved X-ray diffraction coupled with stable isotope analysis. The experimental setup allows the correlation of Cu isotope fractionation with changes in crystal structure during copper sulfide dissolution. This flow-through cell can be applied to many classes of fluid-mineral reactions that involve dissolution or ion exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trace element cycling through iron oxide minerals during redox-driven dynamic recrystallization

Microbially driven iron redox cycling in soil and sedimentary systems, including during diagenesis and fluid migration, may activate secondary abiotic reactions between aqueous Fe(II) and solid Fe(III) oxides. These reactions catalyze dynamic recrystallization of iron oxide minerals through localized and simultaneous oxidative adsorption of Fe(II) and reductive dissolution of Fe(III). Redox-active trace elements undergo speciation changes during this process, but the impact redox-driven recrystallization has on redox-inactive trace elements associated with iron oxides is uncertain. Here we demonstrate that Ni is cycled through the minerals goethite and hematite during redox-driven recrystallization. X-ray absorption spectroscopy demonstrates that during this process adsorbed Ni becomes progressively incorporated into the minerals. Kinetic studies using batch reactors containing aqueous Fe(II) and Ni preincorporated into iron oxides display substantial release of Ni to solution. We conclude that iron oxide recrystallization activated by aqueous Fe(II) induces cycling of Ni through the mineral structure, with adsorbed Ni overgrown in regions of Fe(II) oxidative adsorption and incorporated Ni released in regions of reductive dissolution of structural Fe(III). The redistribution of Ni among the mineral bulk, mineral surface, and aqueous solution appears to be thermodynamically controlled and catalyzed by Fe(II). Our work suggests that important proxies for ocean composition on the early Earth may be invalid, identifies new processes controlling micronutrient availability in soil, sedimentary, and aquatic ecosystems, and points toward a mechanism for trace element mobilization during diagenesis and enrichment in geologic fluids.

54 ENVIRONMENTAL SCIENCES↗

Role of Mg{sup 2+}, Sr{sup 2+}, and F{sup –} ions in octacalcium phosphate crystallization

We have synthesized octacalcium phosphate (OCP) in the presence of inorganic additives (magnesium, strontium, and fluoride ions) and studied the composition, morphology, thermal stability, and dynamic dissolution of the samples thus obtained. It has been shown that, in addition to OCP, magnesium and strontium ions favor the formation of brushite and hydroxyapatite (HA), whereas fluoride ions favor the formation of HA and fluorohydroxyapatite (FHA). We have proposed a process for the preparation of powder materials whose resorption kinetics in corrosive liquid media are corrected by adding dopants capable of activating the dissolution process.

36 MATERIALS SCIENCE↗

Redox potential evolution of nitric species and plutonium in HNO{sub 3}-HNO{sub 2} system

In France, the reprocessing process of spent fuel is carried out using the Purex process. The first chemical step of this process is the dissolution of the spent fuel in aqueous concentrated nitric acid. This dissolution solution is composed of many oxidizing species and it is necessary to understand the chemistry of these species to apprehend the behavior of structural materials. The redox potential is a useful discriminate variable to differentiate the effect of each species. In this framework, only the effect of NO{sub 3}{sup -}/HNO{sub 2} couple and PuO{sub 2}{sup 2+}/Pu{sup 4+} couple were investigated. These species were chosen because one is the main couple of medium and the other has a high standard potential. Their influence was investigated from the Nernst's equation. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗