SEARCH · Engineering Papers

Results for “Diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

All sources NASA NTRS DOE OSTI

NASA NTRS1984

The effect of diffusion induced lattice stress on the open-circuit voltage in silicon solar cells

It is demonstrated that diffusion induced stresses in low resistivity silicon solar cells can significantly reduce both the open-circuit voltage and collection efficiency. The degradation mechanism involves stress induced changes in both the minority carrier mobility and the diffusion length. Thermal recovery characteristics indicate that the stresses are relieved at higher temperatures by divacancy flow (silicon self diffusion). The level of residual stress in as-fabricated cells was found to be negligible in the cells tested.

Weizer, V. G.↗

NASA NTRS1985

Diffusion welding of MA 6000 and a conventional nickel-base superalloy

A feasibility study of diffusion welding the oxide dispersion strengthened (ODS) alloy MA 6000 to itself and to conventional Ni-base superalloy Udimet 700 was conducted. Butt joints between MA 6000 pieces and lap joints between Udimet 700 and the ODS alloy were produced by hot pressing for 1.25 hr at temperatures ranging from 1000 to 1200 C (1832-2192 F) in vacuum. Following pressing, all weldments were heat treated and machined into mechanical property test specimens. While three different combinations of recrystallized and unrecrystallized MA 6000 butt joints were produced, the unrecrystallized to unrecrystallized joint was most successful as determined by mechanical properties and microstructural examination. Failure to weld the recrystallized material probably related to a lack of adequate deformation at the weld interface. While recrystallized MA 6000 could be diffusion welded to Udimet 700 in places, complete welding over the entire lap joint was not achieved, again due to the lack of sufficient deformation at the faying surfaces. Several methods are proposed to promote the intimate contact necessary for diffusion welding MA 6000 to itself and to superalloys.

Moore, T. J.↗

NASA NTRS1985

Radial diffusion in magnetodiscs

The orbits of charged particles in magnetodiscs are considered. The bounce motion is assumed adiabatic except for transits of a small equatorial region of weak magnetic field strength and high field curvature. Previous theory and modeling have shown that particles scatter randomly in pitch angle with each passage through the equator. A peaked distribution thus diffuses in pitch angle on the time scale of many bounces. It is argued in this paper that spatial diffusion is a further consequence when the magnetodisc has a longitudinal asymmetry. A general expression for DLL, the diffusion of equatorial crossing radii, is derived. DLL is evaluated explicitly for ions in Jupiter's 20-35 radii magnetodisc, assumed to be represented by Connerney et al.'s (1982) Voyager model plus a small image dipole asymmetry. Rates are energy, species, and space dependent but can average as much as a few tenths of a planetary radius per bounce period.

Birmingham, T. J.↗

NASA NTRS1985

The application of diffusion theory to the analysis of hydrogen desorption data at 25 deg C

The application of diffusion theory to the analysis of hydrogen desorption data (coulombs of H2 desorbed versus time) has been studied. From these analyses, important information concerning hydrogen solubilities and the nature of the hydrogen distributions in the metal has been obtained. Two nickel base alloys, Rene' 41 and Waspaloy, and one ferrous alloy, 4340 steel, are studied in this work. For the nickel base alloys, it is found that the hydrogen distributions after electrolytic charging conforms closely to those which would be predicted by diffusion theory. For Waspaloy samples charged at 5,000 psi, it is found that the hydrogen distributions are essentially the same as those obtained by electrolytic charging. The hydrogen distributions in electrolytically charged 4340 steel, on the other hand, are essentially uniform in nature, which would not be predicted by diffusion theory. A possible explanation has been proposed. Finally, it is found that the hydrogen desorption is completely explained by the nature of the hydrogen distribution in the metal, and that the fast hydrogen is not due to surface and sub-surface hydride formation, as was originally proposed.

Danford, M. D.↗

NASA NTRS1985

Diffusion and solubility of oxygen in silver

The diffusion and solubility of oxygen in Ag in the temperature range between 412 and 862 C was determined. The following interpolation formula was found for the solubility: L = 8.19.1/100.exp(-11 860/RT)Mol O2/g.At.Ag.at 1/.5. The process obeys the Sieverts square root law within the limits of error. The dissolution of oxygen in Ag may be accompanied by the dissociation of the oxygen molecules into atoms. The tests on Ag-foils reveal that below a temperature of about 500 C a higher solubility is simulated by the adsorption of oxygen. The diffusion coefficient of oxygen in silver obeys the following equation: D = 2.72.1/100.exp(-11 000/RT)sq cm/s. The relatively low activation energy of 11 kcal/g.At suggests that the diffusion of oxygen takes places over interstitial sites.

Eichenauer, W.↗

NASA NTRS1984

APART/PADE analytical evaluation of the diffuse infrared background experiment for NASA's cosmic background explorer

The stray light performance of NASA's Diffuse Infrared Background Experiment (DIRBE) has been calculated using the APART/PADE code. That code has been upgraded to handle off-axis optical systems such as DIRBE. Under observing conditions, sunlight is attenuated by 21 to 29 orders-of-magnitude; uniform diffuse illumination, by 6 to 9 orders of magnitude. The sunlight is attenuated by multiple diffraction at an external sun shield and by a forebaffle at the entrance to the DIRBE. Stray light is nearly a linear function of the Bidirectional Reflectance Distribution Function (BRDF) of the primary mirror at all wavelengths - or it can be made to be so by reducing the size of the field defining stop from 0.866 to 0.7 degrees square. For uniform diffuse illumination, half of the stray radiation comes from within 5 degrees of the center of the field-of-view. Particulate contamination of the primary mirror is expected to be a problem and special polishing and cleaning procedures are recommended - before mirror overcoating and again before flight.

Evans, D. C.↗

NASA NTRS1986

Monte Carlo study of a model of diffusion-controlled reactions

The Monte Carlo method is used to perform averages over sink configurations in the present study of diffusion-controlled reactions occurring between solute particles and immobile spherical sinks. In order to determine the average steady state solute concentration profile in a locally perturbed solution for sink volume fractions phi of less than 0.3, the diffusion equation in the monopolar plus dipolar approximation of diffusive couplings between the sinks is solved numerically. The Monte Carlo method is shown to be the most accurate and efficient in the phi = 0.001-0.1 region, where a system of only 25 sinks suffices and the monopolar approximation alone is sufficiently accurate.

Beenakker, C. W. J.↗

NASA NTRS1986

The importance of diffuse f functions for transition metals

The importance of a diffuse f function for determining the dissociation energy (De) of Cu2 and the 3F-3D energy separation in Ni atom is investigated. It is found that the diffuse f contributes at most 0.05 eV to the De of Cu2 when added to a basis containing tight f functions and a flexibly contracted d basis. The diffuse f function is found to decrease the 3F-3D separation in Ni, but by substantially less than the tight f functions.

Langhoff, S. R.↗

NASA NTRS1986

Radial diffusion and ion partitioning in the Io torus

A model is presented for radial diffusion and charge state partitioning of sulfur and oxygen ions in the Io torus, including effects of electron impact and charge exchange. When applied to Voyager 1 radial profiles of total ion flux tube content, the model shows that the ion residence time in the torus, tau(D), as defined in spectroscopic studies of ion partitioning, is related to the radial diffusion coefficient, D(LL), at L = 7 by tau(D) approximately 8/D(LL)(7). This result appears to bring spectroscopic estimates of the ion residence time (tau/D/ greater than about 60 to 100 days) into reasonable agreement with estimates of D(LL) from magnetospheric diffusion studies, D(LL) equals approximately 10 to the -6th/s.

Cheng, A. F.↗

NASA NTRS1986

Measurement of minority carrier lifetime, mobility and diffusion length in heavily doped silicon

Carrier transport and recombination parameters in heavily doped silicon were examined. Data were presented for carrier diffusivity in both p- and n-type heavily doped silicon covering a broad range of doping concentrations from 10 to the 15th power to 10 to the 20th power atoms/cu cm. One of the highlights of the results showed that minority carrier diffusivities are higher by a factor of 2 in silicon compared to majority carrier diffusivities.

Swirhun, S. E.↗

NASA NTRS1986

Quantitative thermal diffusivity measurements of composites

A remote radiometric technique for making quantitative thermal diffusivity measurements is described. The technique was designed to make assessments of the structural integrity of large composite parts, such as wings, and can be performed at field sites. In the measurement technique, a CO2 laser beam is scanned using two orthogonal servo-controlled deflecting mirrors. An infrared imager, whose scanning mirrors oscillate in the vertical and the horizontal directions, is used as the detector. The analysis technique used to extract the diffusivity from these images is based on a thin infinite plate assumption, which requires waiting a given period of time for the temperature to equilibrate throughout the thickness of the sample. The technique is shown to be accurate to within two percent for values of the order of those for composite diffusivities, and to be insensitive to convection losses.

Heath, D. M.↗

NASA NTRS1987

Downstream boundary effects on the frequency of self-excited oscillations in transonic diffuser flows

An investigation of downstream boundary effects on the frequency of self-excited oscillations in two-dimensional, separated transonic diffuser flows has been conducted numerically by solving the compressible, Reynolds-averaged, thin-layer Navier-Stokes equation with a two-equation turbulence model. It was found that the unsteady diffuser flowfields are very sensitive to the location of the downstream boundary. Extension of the diffuser downstream boundary significantly reduces the frequency and amplitude of oscillations for pressure, velocity and shock. Computational results suggest that the mechanism causing the self-excited oscillation changes from viscous convective wave dominated oscillations to inviscid acoustic wave dominated oscillations when the location of downstream boundary varies from 8.66 to 134.7 throat height. The existence of a suction slot in the experimental setup obscures the physical downstream boundary and, therefore, presents a difficulty for quantitative comparisons between computation and experiment.

Hsieh, T.↗

NASA NTRS1987

An experimental investigation of compressible three-dimensional boundary layer flow in annular diffusers

An experimental study is described in which detailed wall pressure measurements have been obtained for compressible three-dimensional unseparated boundary layer flow in annular diffusers with and without normal shock waves. Detailed mean flow-field data were also obtained for the diffuser flow without a shock wave. Two diffuser flows with shock waves were investigated. In one case, the normal shock existed over the complete annulus whereas in the second case, the shock existed over a part of the annulus. The data obtained can be used to validate computational codes for predicting such flow fields. The details of the flow field without the shock wave show flow reversal in the circumferential direction on both inner and outer surfaces. However, there is a lag in the flow reversal between the inner nad the outer surfaces. This is an interesting feature of this flow and should be a good test for the computational codes.

Om, Deepak↗

NASA NTRS1988

Computerized Analysis Of Thermal-Diffusivity Data

Improved data-acquisition and data-analysis system for thermal-diffusivity measurements using flash method incorporates digital oscilloscope and microcomputer for rapid reduction of experimental data. In thermal-diffusivity apparatus thin specimen heated on one face by pulsed xenon flashlamp, subsequent temperature rise on opposite face monitored by infrared detector. Thermal diffusivity estimated from thickness of specimen and from time after initial pulse during which temperature rise reaches half maximum value. Accuracy of estimate improved by correcting temperature measurements for radiative loss of heat from specimen and for finite duration and specific waveform of flashlamp pulse. System devised for use in high-temperature measurements of thermoelectric materials.

Chmielewski, Artur B.↗

NASA NTRS1988

Investigation of the diffuse ultraviolet background with DE data

The imaging instrumentation on the Dynamics Explorer 1 satellite is used to measure the intensity of the diffused ultraviolet radiation on two great circles about the sky. It was found that the extragalactic component of the diffuse ultraviolet radiation has an intensity of 530 + or - 15 units (a unit is one photon/(sq cm s A sr) at a wavelength of 150 nm. The galactic component of the diffuse ultraviolet radiation has a dependence on galactic latitude which requires strongly forward scattering particles if it is produced by dust above the galactic plane.

Fix, John D.↗

NASA NTRS1987

Crack diffusion coefficient - A candidate fracture toughness parameter for short fiber composites

In brittle matrix composites, crack propagation occurs along random trajectories reflecting the heterogeneous nature of the strength field. Considering the crack trajectory as a diffusive process, the 'crack diffusion coefficient' is introduced. From fatigue crack propagation experiments on a set of identical SEN polyester composite specimens, the variance of the crack tip position along the loading axis is found to be a linear function of the effective 'time'. The latter is taken as the effective crack length. The coefficient of proportionality between variance of the crack trajectory and the effective crack length defines the crack diffusion coefficient D which is found in the present study to be 0.165 mm. This parameter reflects the ability of the composite to deviate the crack from the energetically most efficient path and thus links fracture toughness to the microstructure.

Mull, M. A.↗

NASA NTRS1987

Unsteady diffuser vane pressure and impeller wake measurements in a centrifugal pump

Unsteady surface pressure measurements on a vaned diffuser of a centrifugal pump, and wake measurements of the flow exiting a centrifugal impeller into a vaneless diffuser are presented. Frequency spectra and ensemble averages are given for the unsteady measurements. Two different impellers were used, the pump impeller of the HPOTP (High Pressure Oxygen Turbopump) of the SSME (Space Shuttle Main Engine) and a two-dimensional impeller. The magnitude of the unsteady total pressure measured in the stationary frame at the impeller exit was found to be of the same order of magnitude as the total pressure rise across the pump. The magnitude of the unsteady diffuser vane pressures was observed to be significantly different on suction and pressure side of the vane, attaining its largest value on the suction side the leading edge while decreasing along the vane.

Arndt, N.↗

NASA NTRS1988

Effect of computed horizontal diffusion coefficients on two-dimensional N2O model distributions

The effects of horizontal diffusion coefficients K(yy) and K(yz), computed directly from the residual circulation, on the N2O distribution in a photochemical model were investigated, using a modified version of the two-dimensional model of Guthrie et al. (1984). The residual circulation was computed using the NMC's temperature data and the heating rates reported by Rosenfield et al. (1987). As compared with the effect of the residual circulation alone, the use of horizontal diffusion coefficients produced substantial changes in the N2O distribution and increased the N2O's lifetime values by a few percent. It is suggested that trace gases, such as CH4, CFCl3, CF2Cl2, CH3Cl, and CCl4, which impact the NO(x), HO(x), and Cl(x) radical distributions and therefore ozone, will be influenced in a similar manner by the addition of more realistic diffusion fields.

Jackman, Charles H.↗