Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Differentiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

A power compensated differential scanning calorimeter for protein stability characterization

This study presented a power compensated MEMS differential scanning calorimeter (DSC) for protein stability characterization. In this microfabricated sensor, PDMS (Polydimethylsiloxane) and polyimide were used to construct the adiabatic chamber (1 μL) and temperature sensitive vanadium oxide was used as the thermistor material. A power compensation system was implemented to maintain the sample and reference at the same temperature. The resolution study and step response characterization indicated the high sensitivity (6 V/W) and low noise level (60 μk) of the device. The test with IgG1 antibody (mAb1) samples showed clear phase transitions and the data was confirmed to be reasonable by comparing it with the results of commercial DSC’s test. Finally, this device used ~1uL sample amount and could complete the scanning process in 4 min, significantly increasing the throughput of the bimolecular thermodynamics study like drug formulation process.

36 MATERIALS SCIENCE↗

A convex penalty for switching control of partial differential equations

A convex penalty for promoting switching controls for partial differential equations is introduced; such controls consist of an arbitrary number of components of which at most one should be simultaneously active. Using a Moreau–Yosida approximation, a family of approximating problems is obtained that is amenable to solution by a semismooth Newton method. In conclusion, the efficiency of this approach and the structure of the obtained controls are demonstrated by numerical examples.

97 MATHEMATICS AND COMPUTING↗

Effects of developmental exposure to perfluorooctanoic acid (PFOA) on long bone morphology and bone cell differentiation

Perfluorooctanoic acid (PFOA) is a ubiquitous and persistent environmental chemical, which has been used extensively due to its stability and surface tension-lowering properties. Toxicological effects include induction of neonatal mortality and reproductive toxicity. In this study, pregnant C57BL/6 mice were exposed orally to 0.3 mg PFOA/kg/day throughout pregnancy, and female offspring were studied at the age of 13 or 17 months. Morphometrical and biomechanical properties of femurs and tibias were analyzed with micro-computed tomography and 3-point bending, and bone PFOA concentrations were determined by mass spectrometry. The effects of PFOA on bone cell differentiation were studied in osteoclasts from C57BL/6 mice and in the MC3T3 pre-osteoblast cell line. PFOA exposed mice showed increased femoral periosteal area as well as decreased mineral density of tibias. Biomechanical properties of these bones were not affected. Bone PFOA concentrations were clearly elevated even at the age of 17 months. In osteoblasts, low concentrations of PFOA increased osteocalcin (OCN) expression and calcium secretion, but at PFOA concentrations of 100 μM and above osteocalcin (OCN) expression and calcium secretion were decreased. The number of osteoclasts was increased at all PFOA concentrations tested and resorption activity dose-dependently increased from 0.1–1.0 μM, but decreased at higher concentrations. The results show that PFOA accumulates in bone and is present in bones until the old age. PFOA has the potential to influence bone turnover over a long period of time. Therefore bone is a target tissue for PFOA, and altered bone geometry and mineral density seem to persist throughout the life of the animal. - Highlights: • Bone is a target tissue for PFOA both in vivo and in vitro. • Maternal exposure during pregnancy results in PFOA accumulation in bone of the offspring. • PFOA is present in bones until the old age. • PFOA causes mild alterations in bone morphometry and decreases bone mineral density. • Low PFOA concentrations stimulate the resorption activity of osteoclasts.

60 APPLIED LIFE SCIENCES↗

Investigating Fast Scanning Calorimetry and Differential Scanning Calorimetry as Screening Tools for Thermoset Polymer Material Compatibility with Laser-Based Powder Bed Fusion

As additive manufacturing (AM) technology has developed and progressed, a constant topic of research in the area is expanding the library of materials to be used with these techniques. Among AM methods that utilize polymers, laser-based powder bed fusion (PBF-LB) has preferentially used thermoplastic polymers as its starting materials, but the deposition and material joining method employed in PBF-LB may also be compatible with powdered thermoset polymer precursors as feedstocks. To assess the compatibility of candidate thermosetting polymers and PBF-LB, characterization techniques and protocols that link fundamental material behavior to material behavior in the processing environment are needed. Therefore, the objectives of this work are to compare the curing behavior measured with two different calorimetry techniques that can operate in different heating rate regimes, differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC), and to assess the capabilities of these techniques to act as materials screening tools for PBF-LB. A commercial polyester powder coating is used as a model material to evaluate the potential of obtaining complimentary information for material screening through a combination of calorimetry methods, and its non-isothermal curing behavior is measured at heating rates between 5 °C/min and 7500 °C/min. Curing exotherms are observed with both calorimetry techniques, and comparing the enthalpy associated with curing shows that incomplete curing occurs at higher heating rates, with relative conversion values of approximately 30%. The curing data are fit with two isoconversional models, Friedman and Starink, which show a reduced activation energy at higher heating rates as well, signifying a lower barrier to curing at the conditions used in the FSC experiments. Overall, the results of this work indicate that using these two calorimetry techniques as tiered screening tools can provide valuable information about how curing may proceed in PBF-LB and inform materials selection and design activities for additive manufacturing.

36 MATERIALS SCIENCE↗

Weak baselines and reporting biases lead to overoptimism in machine learning for fluid-related partial differential equations

One of the most promising applications of machine learning in computational physics is to accelerate the solution of partial differential equations (PDEs). The key objective of machine-learning-based PDE solvers is to output a sufficiently accurate solution faster than standard numerical methods, which are used as a baseline comparison. Here, we first perform a systematic review of the ML-for-PDE-solving literature. Out of all of the articles that report using ML to solve a fluid-related PDE and claim to outperform a standard numerical method, we determine that 79% (60/76) make a comparison with a weak baseline. Second, we find evidence that reporting biases are widespread, especially outcome reporting and publication biases. We conclude that ML-for-PDE-solving research is overoptimistic: weak baselines lead to overly positive results, while reporting biases lead to under-reporting of negative results. To a large extent, these issues seem to be caused by factors similar to those of past reproducibility crises: researcher degrees of freedom and a bias towards positive results. We call for bottom-up cultural changes to minimize biased reporting as well as top-down structural reforms to reduce perverse incentives for doing so.

97 MATHEMATICS AND COMPUTING↗

Comparative differential cuproproteomes of Rhodobacter capsulatus reveal novel copper homeostasis related proteins

Abstract Copper (Cu) is an essential, but toxic, micronutrient for living organisms and cells have developed sophisticated response mechanisms towards both the lack and the excess of Cu in their environments. In this study, we achieved a global view of Cu-responsive changes in the prokaryotic model organism Rhodobacter capsulatus using label-free quantitative differential proteomics. Semi-aerobically grown cells under heterotrophic conditions in minimal medium (∼0.3 μM Cu) were compared with cells supplemented with either 5 μM Cu or with 5 mM of the Cu-chelator bathocuproine sulfonate. Mass spectrometry based bottom-up proteomics of unfractionated cell lysates identified 2430 of the 3632 putative proteins encoded by the genome, producing a robust proteome dataset for R. capsulatus. Use of biological and technical replicates for each growth condition yielded high reproducibility and reliable quantification for 1926 of the identified proteins. Comparison of cells grown under Cu-excess or Cu-depleted conditions to those grown under minimal Cu-sufficient conditions revealed that 75 proteins exhibited statistically significant (p < 0.05) abundance changes, ranging from 2- to 300-fold. A subset of the highly Cu-responsive proteins was orthogonally probed using molecular genetics, validating that several of them were indeed involved in cellular Cu homeostasis.

59 BASIC BIOLOGICAL SCIENCES↗

The Princess Project: From Differential to Integral Experiments

Following the shutdown of the CEA Valduc experimental facilities, where, for more than 50 years, IRSN used to perform experiments related to criticality safety, IRSN initiated a new project named PRINCESS (PRoject for IRSN Neutron physics and Criticality Experimental data Supporting Safety). The objective is to continue collecting experimental data necessary for the IRSN missions in nuclear safety. For this purpose, collaborations with various national and international laboratories have been established. The PRINCESS project covers various nuclear physics fields from nuclear data to criticality-safety and reactor physics providing information to both differential and integral data improvements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Differential Cross Section Measurements for the {sup 6}Li(n,t){alpha} Reaction in the Few MeV Region

New measured differential cross sections of tritons and alpha particles following the {sup 6}Li(n,t){alpha} reaction are reported for incident neutron energies between 0.2 and approximately 20 MeV. The neutrons were produced by spallation at the WNR facility at the Los Alamos Neutron Science CEnter (LANSCE), with the incident neutron energy determined by the time-of-flight method. Four E-{delta}E telescopes were used at eight laboratory angles. These data have been incorporated into a prior R-matrix fit for the compound {sup 7}Li system, and result in an (n,t) reaction cross section that is 4% to 10% higher than previous evaluations in the 1-3 MeV incident neutron energy region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

U(1)-invariant membranes: The geometric formulation, Abel, and pendulum differential equations

The geometric approach to study the dynamics of U(1)-invariant membranes is developed. The approach reveals an important role of the Abel nonlinear differential equation of the first type with variable coefficients depending on time and one of the membrane extendedness parameters. The general solution of the Abel equation is constructed. Exact solutions of the whole system of membrane equations in the D=5 Minkowski space-time are found and classified. It is shown that if the radial component of the membrane world vector is only time dependent, then the dynamics is described by the pendulum equation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A regularized approach for solving magnetic differential equations and a revised iterative equilibrium algorithm

A method for approximately solving magnetic differential equations is described. The approach is to include a small diffusion term to the equation, which regularizes the linear operator to be inverted. The extra term allows a ''source-correction'' term to be defined, which is generally required in order to satisfy the solvability conditions. The approach is described in the context of computing the pressure and parallel currents in the iterative approach for computing magnetohydrodynamic equilibria.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Benchmark Calculations of Electron-Impact Differential Cross Sections

The calculation of electron-atom excitation and ionization cross section is considered in both the non-relativistic and relativistic scattering theory. We consider electron collisions with H, He, Cs, and Hg. Differential cross sections for elastic scattering and ionization are presented.

74 ATOMIC AND MOLECULAR PHYSICS↗

Experimental measurements of the heats of formation of Fe{sub 3}Pt, FePt, and FePt{sub 3} using differential scanning calorimetry

Using differential scanning calorimetry (DSC), the heats of formation of Fe{sub 3}Pt, FePt, and FePt{sub 3} were determined from the reaction of sputter deposited Fe/Pt multilayer thin-films with a periodicity of 200 nm but different overall compositions. Film compositions were measured by energy dispersive x-ray spectrometry. The phases present along the reaction path were identified by x-ray diffraction. For the most Fe-rich phase, namely, Fe{sub 3}Pt, the measured enthalpy of formation was -9.3 {+-} 1.3 kJ/mol in a film with a composition of 70.4:29.6 ({+-}0.2 at. %) Fe:Pt. For FePt, the measured enthalpy of formation was -27.2 {+-} 2.2 kJ/g-atom in a 49.0:51.0 ({+-}0.5 at. %) Fe:Pt film. For FePt{sub 3}, which is the most Pt rich intermetallic phase, the measured enthalpy of formation was -23.7 {+-} 2.2 in a film with a composition of 22.2:77.8 ({+-}0.6 at. %) Fe:Pt. The reaction enthalpies for films with Fe:Pt compositions of 44.5:55.5 ({+-}0.3 at. %) and 38.5:61.5 ({+-}0.4 at. %) were -26.9 {+-} 1.0 and -26.6 {+-} 0.6 kJ/g-atom, respectively, which taken together with the value for the 49.0:51.0 film demonstrate the relative insensitivity of the reaction enthalpy to film composition over a broad composition range in the vicinity of the equiatomic composition. The experimental heats of formation are compared with two sets of reported first-principles calculated values for each of the three phases at exact stoichiometry.

36 MATERIALS SCIENCE↗

Communication: State-to-state differential cross sections for H{sub 2}O(B-tild) photodissociation

Quantum state-to-state differential cross sections, along with the absorption spectrum and product internal state distributions, have been calculated for the photodissociation of H{sub 2}O in its B band on a new set of ab initio potential energy surfaces in a diabatic representation. The theoretical attributes are in good agreement with the recent experimental data, shedding light on the non-adiabatic dissociation dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of the Residual Ion Potential on the Fully Differential Cross Section of Helium for Ionization by Electron Impact

We have carried out calculations for the fully differential cross section of the ionization of helium by electron projectiles. In order to study the effect of the residual ion potential, we employed three models, and tested them for the coplanar and perpendicular plane geometry. In spite of the simplicity of our models, the results for the coplanar case are in fair agreement with the available experimental data. The results for the perpendicular geometry need more improvement.

74 ATOMIC AND MOLECULAR PHYSICS↗

Derivation of stochastic differential equations for scrape-off layer plasma fluctuations from experimentally measured statistics

A stochastic differential equation for intermittent plasma density dynamics in magnetic fusion edge plasma is derived, which is consistent with the experimentally measured gamma distribution and the theoretically expected quadratic nonlinearity. The plasma density is driven by a multiplicative Wiener process and evolves on the turbulence correlation time scale, while the linear growth is quadratically damped by the fluctuation level. The sensitivity of intermittency to the nonlinear dynamics is investigated by analyzing the nonlinear Langevin representation of the beta process, which leads to a root-square nonlinearity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Positron interactions with water–total elastic, total inelastic, and elastic differential cross section measurements

Utilising a high-resolution, trap-based positron beam, we have measured both elastic and inelastic scattering of positrons from water vapour. The measurements comprise differential elastic, total elastic, and total inelastic (not including positronium formation) absolute cross sections. The energy range investigated is from 1 eV to 60 eV. Comparison with theory is made with both R-Matrix and distorted wave calculations, and with our own application of the Independent Atom Model for positron interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

How to measure a complete set of polarization-dependent differential cross sections in a scattering experiment with aligned reagents?

Polarization-dependent differential cross section (PDDCS) is one of the three-vector correlations (k, k{sup ′}, j) in molecular collisions, which provides the most detailed insights into the steric requirements of chemical reactions, i.e., how the reactivity depends on the polarization of reagents. Only quite recently has such quantity been fully realized experimentally in the study of the reaction of the aligned CHD{sub 3}(v{sub 1} = 1, |jK〉 = |10〉) molecules with Cl({sup 2}P{sub 3/2}) atoms. Theoretically, PDDCS is a relatively new concept; experimental realization of the theoretical construct requires some careful considerations that are not readily available in the literature. Here, we present the “know-how” behind the full PDDCS measurements to fill the gaps and to provide a clear roadmap for future applications. To make the connection apparent between the methodology presented here and the stereodynamics revealed in previous reports, the same Cl + aligned CHD{sub 3} reaction is used for illustration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗