Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aperture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Analytical evaluation of jet noise source location technique utilizing an acoustically hard baffle with aperture

An analytical investigation was conducted on the experimental technique that uses shielding by an acoustically hard baffle to determine the location of noise sources in a jet. The jet exhausts through a circular hole in the baffle and the radiated acoustic power is considered to be generated by a distributed source along the jet axis. It is found that the effect of the baffle on the radiated power can be neglected only when the size of the source is on the order of a wavelength of the emitted sound or larger. Since noise sources in a jet are compact, the experimental technique is insufficient to identify these sources.

Norum, T. D.↗

Spaceborne synthetic aperture radar pilot study

A pilot study of a spaceborne sidelooking radar is summarized. The results of the system trade studies are given along with the electrical parameters for the proposed subsystems. The mechanical aspects, packaging, thermal control and dynamics of the proposed design are presented. Details of the data processor are given. A system is described that allows the data from a pass over the U. S. to be in hard copy form within two hours. Also included are the proposed schedule, work breakdown structure, and cost estimate.

Source record↗

The design, construction and testing of the optics for a 147-cm-aperture telescope

Geodetic optics research for the Air Force Cambridge Research Laboratories (AFCRL) is described. The work consisted mainly of the fabrication of the optical components for a telescope with a 152-cm-diam (60-in.) primary mirror masked down to 147-cm-diam for use by the AFCRL for a lunar ranging experiment. Among the achievements of this contract were the following: completion of the primary and secondary mirrors for a high-quality 147-cm-diam telescope system in eight months from the start of edging the primary; manufacture and testing of a unique center mount for the primary according to an AFCRL design that allowed for a thin-edged and therefore less-massive mirror; and development of a quantitative analysis of the wire test for calculating the departure of the mirror figure from the design figure quickly and accurately after each polishing step. This analysis method in conjunction with a knowledge of polishing rates for given weights and diameters of tools, mirror, and polishing materials should considerably reduce the polishing time required for future large mirrors.

Buchroeder, R. A.↗

Study of Synthetic Aperture Radar (SAR) imagery characteristics

Sources of geometric and radiometric fidelity errors in AN/APQ-102A radar imagery are discussed, along with a digital computer program to correct the distortions. The major effort, a computer program which will process digitalized recorded AN/APQ-102A phase histories into imagery, is described. All computer programs are listed.

Source record↗

A stabilized large-aperture far-infrared telescope gondola

Description of a recently developed balloon-borne 1-m far-infrared telescope designed to carry out astronomical observations and to map radiation from selected areas of the sky. The telescope optical system consists of a conventional Cassegrain arrangement with an f/2 aluminum primary mirror, spherically figured, which feeds a pyrex secondary mirror to produce an f/13.8 beam at the focal plane with a scale of 15.2 arc sec/mm. Three focal planes are provided. The infrared detectors consist of an array of four gallium-doped germanium bolometers fitted within a two-liter helium dewar. An altitude-azimuth mount design is used for attitude control, with the pointing objectives being achieved in two steps. The azimuth control system is capable of operation in a position mode, in which the sensing element is a servo-driven null magnetometer always pointed north, and in an inertial mode, in which the gyro is uncaged and becomes the azimuth reference. The elevation system also operates in both position and inertial modes. An auxiliary position control, powered by an independent battery and controlled by a separate tone command system, is provided in case of a primary system difficulty.

Hazen, N. L.↗

A balloon-borne ionization spectrometer with very large aperture for the detection of high energy cosmic rays

A balloon experiment which was used to determine the chemical composition of very high-energy cosmic rays up to and beyond 100 GeV/nucleon is described. The detector had a geometric factor of 1 sq m sr and a total weight on the balloon of 2100 kg. The apparatus consisted of an ionization spectrometer, spark chambers, and plastic scintillation and Cherenkov counters. It was calibrated at CERN up to 24 GeV/c protons and at DESY up to 7 GeV/c electrons. In October 1972 it was flown successfully on a stratospheric balloon.

Atallah, K.↗

Analysis of synthetic aperture radar imagery

The author has identified the following significant results. Average radar response for L-band like polarized system appeared to be related to the watershed runoff coefficients when the viewing angle was approximately 42 deg off nadir. Four requirements for radar systems used to verify applications of active microwave for water resources were identified: (1) first generation digital data will be required; (2) radar should be calibrated both internally and externally; (3) new systems should avoid radom use; and (4) images should be geometrically rectified prior to delivery to the user.

Blanchard, B. J.↗

Simulation of the Effects of Hard Limiting on Image Quality of Synthetic Aperture Radar

Starting with a magnetic tape of a scene viewed by the Landsat satellite, the radar return of reflectors whose average intensity matched that of the picture elements in the scene has been simulated. The returns were processed in three ways: normally or with no quantization, with a procedure simulation IF hard limiting, and with a procedure simulating video (baseband) hard limiting. For each type of processing an image for a one, two, and four-look system has been developed. It was found that IF limiting is slightly better than video limiting, while both can be reasonable trade-offs of image quality for reduced data rates when the number of looks is four or less. These conclusions are supported by photographs representing the different processing techniques.

Lipes, R. G.↗

Synthetic Aperture Radar (SAR) data processing

The available and optimal methods for generating SAR imagery for NASA applications were identified. The SAR image quality and data processing requirements associated with these applications were studied. Mathematical operations and algorithms required to process sensor data into SAR imagery were defined. The architecture of SAR image formation processors was discussed, and technology necessary to implement the SAR data processors used in both general purpose and dedicated imaging systems was addressed.

Beckner, F. L.↗

Synthetic aperture radar correlator phase histories

This report supplements the design of the following subsystems: (1) zoom azimuth telescope, zooming range from 3X to 6X. (2) range curvature correcting lenses. (3) Sphero-cylindrical shift lens. (4) Auxiliary lenses (tilted cylinder and matching lens).

Source record↗

Synthetic aperture radar operator tactical target acquisition research

A radar target acquisition research study was conducted to access the effects of two levels of 13 radar sensor, display, and mission parameters on operator tactical target acquisition. A saturated fractional-factorial screening design was employed to examine these parameters. Data analysis computed ETA squared values for main and second-order effects for the variables tested. Ranking of the research parameters in terms of importance to system design revealed four variables (radar coverage, radar resolution/multiple looks, display resolution, and display size) accounted for 50 percent of the target acquisition probability variance.

Hershberger, M. L.↗

Eliminating Clutter in Synthetic-Aperture Radar

Diffusion technique reduces clutter noise in coherent SAR (synthetic-aperature radar) image signal without degrading its resolution. Technique makes radar-mapped terrain features more obvious.It also has potential application in holographic microscopy.

Jain, A.↗

Azimuth Correlator for Synthetic Aperture Radar

Azimuth correlation simulates large antenna aperature. It uses charge-coupled-device (CCD) technology to simplify complex, digital, signal-improvement process. In aircraft or spacecraft, correlator processes images onboard and in real time to simplify transmission to ground stations.

Arens, W. E.↗

Azimuth correlator for real-time synthetic aperture radar image processing

An azimuth correlator architecture is defined wherein a number of serial range-line buffer memories are cascaded such that the output stages of all buffer memories together form a complete and unique range bin in the azimuthal dimension at any given time. A range bin is automatically read out of the last stages of the registers in parallel on a range line sample-by-sample basis for subsequent range migration correction and correlation. Range migration correction is performed on the range bins by effectively varying the length of a delay register at the output of each range-line buffer memory. The corrected range bin output from the delay registers is then correlated with a Doppler reference function to form an image element on a real-time basis.

Arens, W. E.↗

Far-field radiation patterns of aperture antennas by the Winograd Fourier transform algorithm

A more time-efficient algorithm for computing the discrete Fourier transform, the Winograd Fourier transform (WFT), is described. The WFT algorithm is compared with other transform algorithms. Results indicate that the WFT algorithm in antenna analysis appears to be a very successful application. Significant savings in cpu time will improve the computer turn around time and circumvent the need to resort to weekend runs.

Heisler, R.↗

Synthetic Aperture Radar Technology Conference, New Mexico State University, Las Cruces, N. Mex., March 8-10, 1978, Proceedings

The following aspects of SAR development are discussed: calibration techniques, image simulation and interpretability, antennas, data processing, and system design. Papers are presented on such topics as a postlaunch calibration experiment for the Seasat-A SAR, computer simulation of an orbital SAR system, definition study of the Shuttle Imaging Radar, custom LSI circuits for spaceborne SAR processors, and random sampling adaptively focusing SAR.

Source record↗