Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Coherent spin dynamics in nanopatterned ferromagnet-semiconductor hybrids at room-temperature

We used time-resolved Kerr rotation to study the coherent spin dynamics of electrons in Py-GaAs hybrid structures up to room temperature. The geometry of the nanopatterned Py wires was varied in a wide range to modify the fringe field from the ferromagnets and thus the Larmor frequency of the precessing electron spins compared to a reference. At room temperature, the observed fringe field effect is in good agreement with theory while at low temperatures additional strain effects occur.

36 MATERIALS SCIENCE↗

Terahertz emission from InP

We investigate the generation of THz radiation by the application of ultra-short near-infrared optical pulses to bulk unbiased InP. The THz radiation is detected in the direction of the specular reflection. While the overall emission characteristics are similar to those displayed by InAs under similar excitation conditions, in contrast to InAs, a single-cycle only variation in THz signal, of about +-20%, is observed as the sample is rotated through 360 deg. around the surface normal.

36 MATERIALS SCIENCE↗

Atomic ordering in CdSe/ZnSe/MgS quantum dots studied by EXAFS

The local structure of CdSe single quantum dots layer grown by molecular beam epitaxy on GaAs substrates was investigated by the extended x-ray absorption fine structure method (EXAFS). From the quantitative analysis of the data the local neighborhood of Cd atoms was reconstructed. It was found that the second coordination shell is highly disordered and that the quantum dots consist to around 50% of Cd atoms on cation sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lattice Dynamics and the Optical Properties of Semiconductors: Theory of the Temperature Dependent Dielectric Functions of GaAs and Si and Comparison with Experiment

A novel method for calculating the temperature dependencies of the linear dielectric functions of semiconductors is described, in which the lattice vibrations are represented by thermally-perturbed atomic configurations extracted from molecular dynamics (MD) simulations. Our theoretical results for bulk GaAs and Si in the range from 0 to 930 K are in good overall agreement with highly accurate ellipsometric measurements. The implementation of the method resolves a serious discrepancy in energy and line shape between experiment and the latest optical models, all of which neglect lattice dynamics and provide information on the indirect optical transitions and indirect gap in Si.

36 MATERIALS SCIENCE↗

Optical And Mass Spectrometric Investigation Of The Interaction Of Hydrogen With Nitrogen In (In)GaAsN Layers

Fourier transform infrared absorption spectroscopy and secondary ion mass spectroscopy have been carried out on GaAs based dilute nitride layers after treatment with H{sup +} or D{sup +} ions. Formation of N-H (D-H) centers is detected by vibrational absorption bands of H (D). The modes are assigned to two different complexes, each involving one H (D) atom. A major fraction of the hydrogen in the layers might be not or only loosely bound to nitrogen.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of InGaAs/GaAs superlattice-base structure for InGaP/GaAs superlattice-emitter bipolar transistor

The performance of an InGaP/GaAs superlattice-emitter bipolar transistor with InGaAs/GaAs superlattice-base structure is demonstrated by experimental results. The injecting electrons from superlattice emitter are easy to transport into the superlattice-base region for promoting the collector current by tunneling behavior. Furthermore, the average energy gap of base regime is substantially reduced by the use of InGaAs/GaAs superlattice structure for the requirement of low turn-on voltage. Experimentally, the transistor exhibits a maximum common-emitter current gain of 295 and a relatively low collector-emitter offset voltage of only 16 mV. In particular, the ideality factor of collector current near to unity is obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scanning tunneling microscopic analysis of Cu(In,Ga)Se{sub 2} epitaxial layers

Scanning tunneling microscopy (STM) measurements have been made on single-crystal epitaxial layers of CuInSe{sub 2} grown on GaAs substrates. Results were obtained for as-grown, air-exposed, and cleaned surfaces; in situ cleaved surfaces; surfaces sputtered and annealed in the STM system; and samples prepared by a light chemical etch. Conventional constant-current topographs, current-voltage curves, and current imaging tunneling spectroscopy (CITS) scans were obtained. Topographic images show that the surfaces appear rough on the atomic scale and often exhibit regular features consistent with a previously proposed surface ad-dimer reconstruction. CITS scans show a spatially varying energy gap consistent with band-edge fluctuations on a scale of a few atomic spacings. Energy variations were observed in both band edges. Although quantitative description of the magnitude of these fluctuations is difficult, the fluctuations on the atomic scale appear much larger than observed by methods such as photoluminescence, which average over larger volumes.

36 MATERIALS SCIENCE↗

Optimization towards high density quantum dots for intermediate band solar cells grown by molecular beam epitaxy

We report high density quantum dots (QDs) formation with optimized growth temperature and V/III ratio. At lower growth temperature, QD density is increased, due to smaller surface migration length of In adatoms. With higher V/III, the QD density is higher but it results in large clusters formation and decreases the QD uniformity. The QD solar cell was fabricated and examined. An extended spectral response in contrast to the GaAs reference cell was presented but the external quantum efficiency at energies higher than GaAs band gap is reduced, resulting from the degradation for the emitter above the strained QD layers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High performance tunnel injection quantum dot comb laser

A high-speed multiwavelength quantum dot comb laser, grown by molecular beam epitaxy, is demonstrated. The device is characterized with a 75.9 nm (full width at half maximum) and a 91.4 nm (DELTA{sub -15dB}) wide lasing spectrum. There are 105 and 185 simultaneously emitted longitudinal modes with a maximum channel intensity nonuniformity of less than 3 dB in the spectral range of 1231-1252 nm and 1274-1311 nm, respectively, for a laser with 1040 mum cavity length. The channel spacing can be tuned with cavity length and remains invariant in the temperature range of 300-323 K. The small signal modulation bandwidth is 7.5 GHz.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth and ferrimagnetic properties of Mn film on GaSb(100)

We report on the epitaxial stabilization and magnetic properties of Mn films on GaSb(100) using molecular beam epitaxy, a follow-up to our previous work on the growth of Mn films on GaAs(100) [Phys. Rev. B 79, 045309 (2009)]. A strong ferrimagnetic ordering was observed which was attributed to the largely expanded lattice parameter resulting from the lattice mismatch with substrate and the enhanced thermal energy with increasing growth temperature. The observed magnetic moment of 1.16{mu}{sub B}/Mn atom was several times larger than that observed in the Mn/GaAs(100) films due to the lattice constant difference of substrates. The in-plane magnetoresistance behavior demonstrated the magnetic anisotropy that might result from the slightly distorted cubic structure of {alpha}-Mn phase under low-dimensional growth.

36 MATERIALS SCIENCE↗

Growth kinetics and electronic properties of unintentionally doped semi-insulating GaN on SiC and high-resistivity GaN on sapphire grown by ammonia molecular-beam epitaxy

Growth of unintentionally doped (UID) semi-insulating GaN on SiC and highly resistive GaN on sapphire using the ammonia molecular-beam epitaxy technique is reported. The semi-insulating UID GaN on SiC shows room temperature (RT) resistivity of 10{sup 11} {Omega} cm and well defined activation energy of 1.0 eV. The balance of compensation of unintentional donors and acceptors is such that the Fermi level is lowered to midgap, and controlled by a 1.0 eV deep level defect, which is thought to be related to the nitrogen antisite N{sub Ga}, similar to the ''EL2'' center (arsenic antisite) in unintentionally doped semi-insulating GaAs. The highly resistive GaN on sapphire shows RT resistivity in range of 10{sup 6}-10{sup 9} {Omega} cm and activation energy varying from 0.25 to 0.9 eV. In this case, the compensation of shallow donors is incomplete, and the Fermi level is controlled by levels shallower than the 1.0 eV deep centers. The growth mechanisms for the resistive UID GaN materials were investigated by experimental studies of the surface kinetics during growth. The required growth regime involves a moderate growth temperature range of 740-780 deg. C, and a high ammonia flux (beam equivalent pressure of 1x10{sup -4} Torr), which ensures supersaturated coverage of surface adsorption sites with NH{sub x} radicals. Such highly nitrogen rich growth conditions lead to two-dimensional layer by layer growth and reduced oxygen incorporation.

36 MATERIALS SCIENCE↗

Incorporation of the dopants Si and Be into GaAs nanowires

We studied the doping with Si and Be of GaAs nanowires (NWRs) grown by molecular beam epitaxy. Regarding the NW morphology, no influence was observed for Si doping but high Be doping concentrations cause a kinking and tapering of the NWRs. We investigated local vibrational modes by means of resonant Raman scattering to determine the incorporation sites of the dopant atoms. For Si doping, both donors on Ga sites and acceptors on As sites have been observed. Be was found to be incorporated as an acceptor on Ga sites. However, at high doping concentration, Be is also incorporated on interstitial sites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improved interfacial state density in Al{sub 2}O{sub 3}/GaAs interfaces using metal-organic chemical vapor deposition

In situ deposition of Al{sub 2}O{sub 3} on GaAs was performed by chemical-vapor-deposition (CVD) with trimethyaluminum and isopropanol as precursors. A gallium-rich region in the Al{sub 2}O{sub 3} thin film above the interface was spontaneously formed via the in situ CVD process. Ga-enrichment of the interface was observed using secondary ion mass spectrometry (SIMS) depth profile measurement. X-ray photoelectron spectroscopy (XPS) results show that the gallium-rich region consists of Al{sub 2}O{sub 3} and Ga{sub 2}O{sub 3}, but no As{sub 2}O{sub 3} was observed. The Ga{sub 2}O{sub 3}-Al{sub 2}O{sub 3} layer above the oxide/GaAs interface reduces the frequency dispersion as measured with capacitance-voltage (C-V) characteristics and lowers the interfacial state density as compared to atomic-layer-deposition *(ALD) deposited films which do not display this gallium enrichment above the interface.

36 MATERIALS SCIENCE↗

Continuous distribution of defect states and band gap narrowing in neutron irradiated GaAs

We find that fast neutron irradiated n- and p-GaAs diodes both show a broad feature in deep level transient spectroscopy (DLTS) previously studied primarily in n-GaAs and termed the ''U-band.'' The high temperature edge of the broad DLTS feature cuts off at the same temperature in both n- and p-GaAs suggesting that the cut off is due to the DLTS behavior expected for a continuous density of defect states that spans midgap. The band gap implied by the DLTS midgap cut off is 1.36 eV, as compared to the bulk GaAs band gap 1.52 eV. Band gap narrowing is consistent with previous measurements of lattice expansion in neutron irradiated GaAs. This leads to a model of defect cascades that are regions of narrowed band gap with defect levels that are inhomogeneously broadened. We observe, in addition, that the damage cascades are surrounded by large Coulomb barriers that prevent the complete filling of traps in the damaged regions.

36 MATERIALS SCIENCE↗

Impact of ion-implantation-induced band gap engineering on the temperature-dependent photoluminescence properties of InAs/InP quantum dashes

We report on the effects of the As/P intermixing induced by phosphorus ion implantation in InAs/InP quantum dashes (QDas) on their photoluminescence (PL) properties. For nonintermixed QDas, usual temperature-dependent PL properties characterized by a monotonic redshift in the emission band and a continual broadening of the PL linewidth as the temperature increases, are observed. For intermediate ion implantation doses, the inhomogeneous intermixing enhances the QDas size dispersion and the enlarged distribution of carrier confining potential depths strongly affects the temperature-dependent PL properties below 180 K. An important redshift in the PL emission band occurs between 10 and 180 K which is explained by a redistribution of carriers among the different intermixed QDas of the ensemble. For higher implantation doses, the homogeneous intermixing reduces the broadening of the localized QDas state distribution and the measured linewidth temperature behavior matches that of the nonintermixed QDas. An anomalous temperature-dependent emission energy behavior has been observed for extremely high implantation doses, which is interpreted by a possible QDas dissolution.

36 MATERIALS SCIENCE↗

In situ growth of superconducting NdFeAs(O,F) thin films by molecular beam epitaxy

Superconducting NdFeAs(O,F) thin films were grown on GaAs substrates by molecular beam epitaxy. Films grown with a sufficiently long growth time exhibited a clear superconducting transition with an onset temperature up to 48 K and zero resistance temperature up to 42 K without the need of an ex situ annealing process. Electron probe microanalysis and Hall coefficient measurements indicated that the superconducting films are doped with fluorine, and depth-profile analysis by Auger electron spectroscopy revealed the formation of a NdOF layer near the surface, which is probably connected with the fluorine doping.

36 MATERIALS SCIENCE↗

Impact of heavy hole-light hole coupling on optical selection rules in GaAs quantum dots

We report strong heavy hole-light hole mixing in GaAs quantum dots grown by droplet epitaxy. Using the neutral and charged exciton emission as a monitor we observe the direct consequence of quantum dot symmetry reduction in this strain free system. By fitting the polar diagram of the emission with simple analytical expressions obtained from k{center_dot}p theory we are able to extract the mixing that arises from the heavy-light hole coupling due to the geometrical asymmetry of the quantum dot.

36 MATERIALS SCIENCE↗

Magnetic anisotropies of laterally confined structures of epitaxial Fe films on GaAs (001)

We have investigated magnetic properties of laterally confined structures of epitaxial Fe films on GaAs (001). Fe films with different thicknesses were grown by molecular-beam epitaxy and patterned into regular arrays of rectangles with varying aspect ratios. In-plane magnetic anisotropy was observed in all of the patterned Fe films both at 15 and 300 K. We have demonstrated that the coercive fields can be tuned by varying the aspect ratios of the structures. The magnitudes of the corresponding anisotropy constants have been determined and the shape anisotropy constant is found to be enhanced as the aspect ratio is increased.

36 MATERIALS SCIENCE↗