Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ABERRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,387 records · Page 77

Atomically Dispersed Pd–O Species on CeO 2 (111) as Highly Active Sites for Low-Temperature CO Oxidation

Ceria-supported Pd is a promising heterogeneous catalyst for CO oxidation relevant to environmental cleanup reactions. Pd loaded onto a nanorod form of ceria exposing predominantly (111) facets is already active at 50 °C. Here we report a combination of CO-FTIR spectroscopy and theoretical calculations that allows assigning different forms of Pd on the CeO 2 (111) surface during reaction conditions. Single Pd atoms stabilized in the form of PdO and PdO 2 in a CO/O 2 atmosphere participate in a catalytic cycle involving very low activation barriers for CO oxidation. In conclusion, the presence of single Pd atoms on the Pd/CeO 2 -nanorod, corroborated by aberration-corrected TEM and CO-FTIR spectroscopy, is considered pivotal to its high CO oxidation activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the Dynamics of Platinum Nanoparticle Catalysts on Carbon in Oxygen and Water Using Environmental TEM

Deactivation of supported metal nanoparticle catalysts, especially in relevant gas condition, is a critical challenge for many technological applications, including heterogeneous catalysis, electrocatalysis, fuel cells, biomedical imaging and drug delivery. It has been far more commonly realized that deactivation of catalysts stems from surface area loss due to particle coarsening, however, for which the mechanism remains largely unclear. Herein, we use aberration corrected environmental transmission electron microscopy, at atomic level, to in-situ observe the dynamics of Pt catalyst in fuel cell relevant gas conditions. Particles migration and coalescence is observed to be the dominant coarsening process. As compared with the case of H2O, O2 promotes Pt nanoparticle migration on carbon surface. Surprisingly, coating Pt/carbon with a nanofilm of electrolyte (Nafion ionomer) leads to a faster migration of Pt in H2O than in O2, a consequence of Nafion-carbon interface water “lubrication” effect. Atomically, the particles coalescence is featured by re-orientation of particles towards lattice matching, a process driven by orientation dependent van der Waals force. These results provide direct observations of dynamics of metal nanoparticles at critical surface/interface under relevant conditions and yield significant insights into the multi-phase interaction in related technological processes.

atomic scale↗

Identifying Dynamic Structural Changes of Active Sites in Pt–Ni Bimetallic Catalysts Using Multimodal Approaches

Alloy nanoparticle catalysts are known to afford unique activities that can differ markedly from their parent metals, but there remains a generally limited understanding of the nature of their atomic (and likely dynamic) structures as exist in heterogeneously supported forms under reaction conditions. Notably unclear is the nature of their active sites and the details of the varying oxidation states and atomic arrangements of the catalytic components during chemical reactions. In this work, we describe multimodal methods that provide a quantitative characterization of the complex heterogeneity present in the chemical and electronic speciations of Pt–Ni bimetallic catalysts supported on mesoporous silica during the reverse water gas shift reaction. The analytical protocols involved a correlated use of in situ X-ray Absorption Spectroscopy (XAS) and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), complimented by ex-situ aberration corrected Scanning Transmission Electron Microscopy (STEM). The data reveal that complex reactions occur between the metals and support in this system under operando conditions. These reactions, and the specific impacts of strong metal–silica bonding interactions, prevent the formation of alloy phases containing Ni–Ni bonds. This feature of structure provides high activity and selectivity for the reduction of CO 2 to carbon monoxide without significant competitive levels of methanation. In conclusion, we show how these chemistries evolve to the active state of the catalyst: bimetallic nanoparticles possessing an intermetallic structure (the active phase) that are conjoined with Ni-rich, metal-silicate species.

36 MATERIALS SCIENCE↗

Atomically Dispersed Reduced Graphene Aerogel-Supported Iridium Catalyst with an Iridium Loading of 14.8 wt %

Atomically dispersed iridium complexes were anchored on a reduced graphene aerogel (rGA) by the reaction of Ir(CO) 2 (acac) [acac = acetonylacetonato] with oxygen-containing groups on the rGA. Characterization by X-ray absorption, infrared, and X-ray photoelectron spectroscopies and atomic resolution aberration-corrected scanning transmission electron microscopy demonstrates atomically dispersed iridium, at the remarkably high loading of 14.8 wt %. The rGA support offers sites for metal bonding comparable to those of metal oxides, but with the advantages of high density and a relatively high degree of uniformity, as indicated by the same turnover frequencies for catalytic hydrogenation of ethylene at low and high iridium loadings. We note the atomic dispersion at a high metal loading—and the high density of catalytic sites per unit of reactor volume, a key criterion for practical catalysts—set this catalyst apart from those reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiation damage effects in chlorite investigated using microfocus synchrotron techniques

A detailed understanding of the mechanisms and effects of radiation damage in phyllosilicate minerals is a necessary component of the evaluation of the safety case for a deep geological disposal facility (GDF) for radioactive waste. Structural and chemical changes induced by a-particle damage will affect these mineral’s performance as a reactive barrier material (both in the near and far-field) over timescales relevant to GDF integrity. In this study, two examples of chlorite group minerals have been irradiated at a-particle doses comparable to those predicted to be experienced by the clay buffer material surrounding high level radioactive waste canisters. Crystallographic aberrations induced by the focused 4He2+ ion beam are revealed via high-resolution, microfocus X-ray diffraction mapping. Interlayer collapse by up to 0.5 Å is prevalent across both macro- and micro-crystalline samples, with the macro-crystalline specimen displaying a breakdown of the phyllosilicate structure into loosely-connected, multi-oriented crystallites displaying variable lattice parameters. The damaged lattice parameters suggest a localised breakdown and collapse of the OH- rich, ‘brucite-like’ interlayer. Microfocus Fe K-edge X-ray absorption spectroscopy illustrates this defect accumulation, manifest as a severe damping of the X-ray absorption edge. Subtle Fe2+/Fe3+ speciation changes are apparent across the damaged structures. A trend towards Fe reduction is evident at depth in the damaged structures at certain doses (8.76 x 1015 alpha particles/ cm2). Interestingly, this reductive trend does not increase with radiation dose, indeed at the maximum dose (1.26 x 1016 alpha particles/ cm2) administered in this study, there is evidence for a slight increase in Fe binding energy, suggesting the development of a depth-dependant redox gradient concurrent with light ion damage. At the doses examined here, these damaged structures are likely highly reactive, as sorption capacity will, to an extent, be largely enhanced by lattice disruption and an increase in available ‘edge’ sites.

Bower, William R.↗

Buried Hydrogen Bond Interactions Contribute to the High Potency of Complement Factor D Inhibitors

Aberrant activation of the complement system is associated with diseases, including paroxysmal nocturnal hemoglobinuria and age-related macular degeneration. Complement factor D is the rate-limiting enzyme for activating the alternative pathway in the complement system. Recent development led to a class of potent amide containing pyrrolidine derived factor D inhibitors. Here, we used biochemical enzymatic and biolayer interferometry assays to demonstrate that the amide group improves the inhibitor potency by more than 80-fold. Our crystal structures revealed buried hydrogen bond interactions are important. Molecular orbital analysis from quantum chemistry calculations dissects the chemical groups participating in these interactions. Free energy calculation supports the differential contributions of the amide group to the binding affinities of these inhibitors. Cell-based hemolysis assay confirmed these compounds inhibit factor D mediated complement activation via the alternative pathway. Our study highlights the important interactions contributing to the high potency of factor D inhibitors reported recently.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic Insights Into the Oriented Attachment of Tunnel-Based Oxide Nanostructures

Controlled synthesis of nanomaterials is one of the grand challenges facing materials scientists. In particular, how tunnel-based nanomaterials aggregate during synthesis while maintaining their well-aligned tunneled structure is not fully understood. Here, we describe the atomistic mechanism of oriented attachment (OA) during solution synthesis of tunneled α-MnO2 nanowires based on a combination of in situ liquid cell transmission electron microscopy (TEM), aberration-corrected scanning TEM with subangstrom spatial resolution, and first-principles calculations. It is found that primary tunnels (1 × 1 and 2 × 2) attach along their common {110} lateral surfaces to form interfaces corresponding to 2 × 3 tunnels that facilitate their short-range ordering. The OA growth of α-MnO2 nanowires is driven by the stability gained from elimination of {110} surfaces and saturation of Mn atoms at {110}-edges. During this process, extra [MnOx] radicals in solution link the two adjacent {110} surfaces and bond with the unsaturated Mn atoms from both surface edges to produce stable nanowire interfaces. Our results provide insights into the controlled synthesis and design of nanomaterials in which tunneled structures can be tailored for use in catalysis, ion exchange, and energy storage applications.

interface↗

Atomic Structure and Dynamics of Single Platinum Atom Interactions with Monolayer MoS 2

In this work, we have studied atomic level interactions between single Pt atoms and the surface of monolayer MoS 2 using aberration-corrected annular dark field scanning transmission electron microscopy at an accelerating voltage of 60 kV. Strong contrast from single Pt atoms on the atomically resolved monolayer MoS 2 lattice enables their exact position to be determined with respect to the MoS2 lattice, revealing stable binding sites. In regions of MoS 2 free from surface contamination, the Pt atoms are localized in S vacancy sites and exhibit dynamic hopping to nearby vacancy sites driven by the energy supplied by the electron beam. However, in areas of MoS 2 contaminated with carbon surface layers, the Pt atoms appear at various positions with respect to the underlying MoS 2 lattice, including on top of Mo and in off-axis positions. These variations are due to the Pt bonding with the surrounding amorphous carbon layer, which disrupts the intrinsic Pt–MoS 2 interactions, leading to more varied positions. Density functional theory (DFT) calculations reveal that Pt atoms on the surface of MoS 2 have a small barrier for migration and are stabilized when bound to either a single or double sulfur vacancies. DFT calculations have been used to understand how the catalytic activity of the MoS 2 basal plane for hydrogen evolution reaction is influenced by Pt dopants by variation of the hydrogen adsorption free energy. Finally, this strong dependence of catalytic effect on interfacial configurations is shown to be common for a series of dopants, which may provide a means to create and optimize reaction centers.

2D materials↗

Epitaxial Templating of Two-Dimensional Metal Chloride Nanocrystals on Monolayer Molybdenum Disulfide

We demonstrate the formation of ionic metal chloride (CuCl) two-dimensional (2D) nanocrystals epitaxially templated on the surface of monolayer molybdenum disulfide (MoS 2 ). These 2D CuCl nanocrystals are single atomic planes from a nonlayered bulk CuCl structure. They are stabilized as a 2D monolayer on the surface of the MoS 2 through interactions with the uniform periodic surface of the MoS 2 . The heterostructure 2D system is studied at the atomic level using aberration-corrected transmission electron microscopy at 80 kV. Dynamics of discrete rotations of the CuCl nanocrystals are observed, maintaining two types of preferential alignments to the MoS 2 lattice, confirming that the strong interlayer interactions drive the stable CuCl structure. Strain maps are produced from displacement maps and used to track real-time variations of local atomic bonding and defect production. Density functional theory calculations interpret the formation of two types of energetically advantageous commensurate superlattices via strong chemical bonds at interfaces and predict their corresponding electronic structures. These results show how vertical heterostructured 2D nanoscale systems can be formed beyond the simple assembly of preformed layered materials and provide indications about how different 2D components and their interfacial coupling mode could influence the overall property of the heterostructures.

36 MATERIALS SCIENCE↗

Electrical Breakdown of Suspended Mono- and Few-Layer Tungsten Disulfide via Sulfur Depletion Identified by in Situ Atomic Imaging

The high bias behavior of mono- and few-layer WS2 is explored by in situ aberration corrected transmission electron microscopy (AC-TEM). The suspended WS2 devices were found to undergo irreversible breakdown at sufficiently high biases, however simultaneous to the removal of WS2 was the accompanying formation of few-layer graphene decorated with W and WS2 nanoparticles. The breakdown of few-layer WS2 resulted in the formation of facetted S-depleted WS2 tendrils along the vaporization boundary, which were found to exhibit lattice contraction indicative of S depletion, alongside pure W phases incorporated into the structure, with the interfaces imaged at atomic resolution. The combination of observing; graphitization of the amorphous carbon surface residue, W nanoparticles, and S depleted WS2 phases, following the high-bias WS2 disintegration all indicate a thermal Joule heating breakdown mechanism over an avalanche process. The observation of graphene formation, and the role the thin amorphous carbon layer has in the pre-breakdown behavior of the device, demonstrate the importance of employing encapsulated heterostructure device architectures that exclude residues.

Fan, Ye↗

Atomic Structure and Dynamics of Self-Limiting Sub-Nanometer Pores in Monolayer WS 2

Here, we reveal a self-limiting mechanism during the formation of a specific type of circular nanopore in monolayer WS 2 that limits its diameter to sub-nm. A single W atom vacancy (triangular nanopore) is transformed into the self-limiting nanopore (SLNP) through the atomic restructuring of S atoms around the area, reducing the number of dangling bonds at the nanopore edge by shifting them further in-plane with W–W bonding instead. Bond rotations in WS 2 help accommodate the electron beam induced atomic loss and ensure the stability of the SLNP. The SLNP shows significant improvement in diameter stability during electron beam irradiation compared to other triangular nanopores in WS 2 that typically continue to expand in diameter during atom loss. The atomic structure of these SLNPs is studied using aberration-corrected scanning transmission electron microscopy with an in situ heating holder, revealing that the SLNPs are mostly formed at a temperature of ~500 °C, which is a balance between thermally activated S vacancy diffusion and sufficient S vacancy density to initiate local atomic reconstruction. At higher temperatures (i.e., 1000 °C), S vacancies quickly migrate away into long line vacancies, resulting in low S vacancy density and rapidly expanding holes generated at the edges of the line vacancies. At room temperature, S vacancy migration is low and vacancy density is very high, which limits atomic reconstruction, and instead many small holes open up. In conclusion, these results provide insights into the factors that lead to uniform sized nanopores in the sub-nm range in transition-metal dichalcogenides.

2D materials↗

Carbon-13 Radiofrequency Amplification by Stimulated Emission of Radiation of the Hyperpolarized Ketone and Hemiketal Forms of Allyl [1- 13 C]Pyruvate

13 C hyperpolarized pyruvate is an emerging MRI contrast agent for sensing molecular events in cancer and other diseases with aberrant metabolic pathways. This metabolic contrast agent can be produced via several hyperpolarization techniques. Despite remarkable success in research settings, widespread clinical adoption faces substantial roadblocks because the current sensing technology utilized to sense this contrast agent requires the excitation of 13 C nuclear spins that also need to be synchronized with MRI field gradient pulses. Here, we demonstrate sensing of hyperpolarized allyl [1- 13 C]pyruvate via the stimulated emission of radiation that mitigates the requirements currently blocking broader adoption. Specifically, 13 C Radiofrequency Amplification by Stimulated Emission of Radiation ( 13 C RASER) was obtained after pairwise addition of parahydrogen to a pyruvate precursor, detected in a commercial inductive detector with a quality factor (Q) of 32 for sample concentrations as low as 0.125 M with 13 C polarization of 4%. Moreover, parahydrogen-induced polarization allowed for the preparation of a mixture of ketone and hemiketal forms of hyperpolarized allyl [1- 13 C]pyruvate, which are separated by 10 ppm in 13 C NMR spectra. This is a good model system to study the simultaneous 13 C RASER signals of multiple 13 C species. This system models the metabolic production of hyperpolarized [1- 13 C]lactate from hyperpolarized [1- 13 C]pyruvate, which has a similar chemical shift difference. Our results show that 13 C RASER signals can be obtained from both species simultaneously when the emission threshold is exceeded for both species. On the other hand, when the emission threshold is exceeded only for one of the hyperpolarized species, 13 C stimulated emission is confined to this species only, therefore enabling the background-free detection of individual hyperpolarized 13 C signals. Furthermore, the reported results pave the way to novel sensing approaches of 13 C hyperpolarized pyruvate, potentially unlocking hyperpolarized 13 C MRI on virtually any MRI system–an attractive vision for the future molecular imaging and diagnostics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for Novel [beta]-Sheet Structures in Iowa Mutant [beta]-Amyloid Fibrils

Asp23-to-Asn mutation within the coding sequence of {beta}-amyloid, called the Iowa mutation, is associated with early onset, familial Alzheimer's disease and cerebral amyloid angiopathy, in which patients develop neuritic plaques and massive vascular deposition predominantly of the mutant peptide. We examined the mutant peptide, D23N-A{beta}40, by electron microscopy, X-ray diffraction, and solid-state NMR spectroscopy. D23N-A{beta}40 forms fibrils considerably faster than the wild-type peptide (k = 3.77 x 10{sup -3} min{sup -1} and 1.07 x 10{sup -4} min{sup -1} for D23N-A{beta}40 and the wild-type peptide WT-A{beta}40, respectively) and without a lag phase. Electron microscopy shows that D23N-A{beta}40 forms fibrils with multiple morphologies. X-ray fiber diffraction shows a cross-{beta} pattern, with a sharp reflection at 4.7 {angstrom} and a broad reflection at 9.4 {angstrom}, which is notably smaller than the value for WT-A{beta}40 fibrils (10.4 {angstrom}). Solid-state NMR measurements indicate molecular level polymorphism of the fibrils, with only a minority of D23N-A{beta}40 fibrils containing the in-register, parallel {beta}-sheet structure commonly found in WT-A{beta}40 fibrils and most other amyloid fibrils. Antiparallel {beta}-sheet structures in the majority of fibrils are indicated by measurements of intermolecular distances through 13C-13C and 15N-13C dipole-dipole couplings. An intriguing possibility exists that there is a relationship between the aberrant structure of D23N-A{beta}40 fibrils and the unusual vasculotropic clinical picture in these patients.

59 BASIC BIOLOGICAL SCIENCES↗

Promotional Effects of Bismuth on the Formation of Platinum-Bismuth Nanowires Network and the Electrocatalytic Activity toward Ethanol Oxidation

Electrocatalytic activities of Pt and their alloys toward small organic molecules oxidation are highly dependent on their morphology, chemical composition, and electronic structure. Here, we report the synthesis of dendrite-like Pt{sub 95}Bi{sub 5}, Pt{sub 83}Bi{sub 17}, and Pt{sub 76}Bi{sub 24} nanowires network with a high aspect ratio (up to 68). The electronic structure and heterogeneous crystalline structure have been studied using combined techniques, including aberration-corrected scanning transmission electron microscopy (STEM) and X-ray absorption near-edge structure (XANES) spectroscopy. Bismuth-oriented attachment growth mechanism has been proposed for the anisotropic growth of Pt/Bi. The electrochemical activities of Pt/Bi nanowires network toward ethanol oxidations have been tested. In particular, the as-made Pt{sub 95}Bi{sub 5} appears to have superior activity toward ethanol oxidation in comparison with the commercial Pt/C catalyst. The reported promotional effect of Bi on the formation of Pt/Bi and electrochemical activities will be important to design effective catalysts for ethanol fuel cell application.

10 SYNTHETIC FUELS↗

Nanoscale Phase Separation, Cation Ordering, and Surface Oxygen Chemistry in Pristine Li1.2Ni0.2Mn0.6O2 for Li-Ion Batteries

Li-rich layered material Li1.2Ni0.2Mn0.6O2 possesses high voltage and high specific capacity, which makes it an attractive candidate for the transportation industry and sustainable energy storage systems. The rechargeable capacity of the Li-ion battery is linked largely to the structural stability of the cathode materials during the charge-discharge cycles. However, the structure and cation distribution in pristine (un-cycled) Li1.2Ni0.2Mn0.6O2 have not yet been fully characterized. Using a combination of aberration-corrected scanning/transmission electron microscopy, X-ray dispersive energy spectroscopy (XEDS), electron energy loss spectroscopy (EELS), and complementary multislice image simulation, we have probed the crystal structure, cation/anion distribution, and electronic structure of Li1.2Ni0.2Mn0.6O2 nanoparticle. We discovered that the electronic structure and valence state of transition metal ions show significant variations, which have been identified to be attributed to the oxygen deficiency near the particle surfaces. Characterization of the nanoscale phase separation and cation ordering in the pristine material are critical for understanding the capacity and voltage fading of this material for battery application.

Environmental Molecular Sciences Laboratory↗

Insight into the Atomic Structure of High-Voltage Spinel LiNi 0.5 Mn 1.5 O 4 Cathode Material in the First Cycle

Application of high-voltage spinel LiNi 0.5 Mn 1.5 O 4 cathode material is the closest and the most realistic approach to meeting the midterm goal of lithium-ion batteries for electric vehicles (EVs) and plug-in hybrid electric vehicles (HEVs). However, this application has been hampered by long-standing issues, such as capacity degradation and poor first-cycle Coulombic efficiency of LiNi 0.5 Mn 1.5 O 4 cathode material. Although it is well-known that the structure of LiNi 0.5 Mn 1.5 O 4 into which Li ions are reversibly intercalated plays a critical role in the above issues, performance degradation related to structural changes, particularly in the first cycle, are not fully understood. Here, we report detailed investigations of local atomic-level and average structure of LiNi 0.5 Mn 1.5 O 4 during first cycle (3.5–4.9 V) at room temperature. We observed two types of local atomic-level migration of transition metals (TM) ions in the cathode of a well-prepared LiNi 0.5 Mn 1.5 O 4 //Li half-cell during first charge via an aberration-corrected scanning transmission electron microscopy (STEM). Surface regions (~2 nm) of the cycled LiNi 0.5 Mn 1.5 O 4 particles show migration of TM ions into tetrahedral Li sites to form a Mn 3 O 4 -like structure. However, subsurface regions of the cycled particles exhibit migration of TM ions into empty octahedral sites to form a rocksalt-like structure. The migration of these TM ions are closely related to dissolution of Ni/Mn ions and building-up of charge transfer impedance, which contribute significantly to the capacity degradation and the poor first-cycle Coulombic efficiency of spinel LiNi 0.5 Mn 1.5 O 4 cathode material. Accordingly, we provide suggestions of effective stabilization of LiNi 0.5 Mn 1.5 O 4 structure to obtain better electrochemical performance.

25 ENERGY STORAGE↗

Probing the Degradation Mechanism of Li2MnO3 Cathode for Li-Ion Batteries

Capacity and voltage fading of Li2MnO3 is a major challenge for the application of this category of material, which is believed to be associated with the structural and chemical evolution of the materials. This paper reports the detailed structural and chemical evolutions of Li2MnO3 cathode captured by using aberration corrected scanning/transmission electron microscope (S/TEM) after certain numbers of charge-discharge cycling of the batteries. It is found that structural degradation occurs from the very first cycle and is spatially initiated from the surface of the particle and propagates towards the inner bulk as cyclic number increase, featuring the formation of the surface phase transformation layer and gradual thickening of this layer. The structure degradation is found to follow a sequential phase transformation: monoclinic C2/m → tetragonal I41 → cubic spinel, which is consistently supported by the decreasing lattice formation energy based on DFT calculations. For the first time, high spatial resolution quantitative chemical analysis reveals that 20% oxygen in the surface phase transformation layer is removed and such newly developed surface layer is a Li-depleted layer with reduced Mn cations. This work demonstrates a direct correlation between structural degradation and cell’s electrochemical degradation, which enhances our understanding of Li-Mn-rich (LMR) cathode materials.

Environmental Molecular Sciences Laboratory↗

Nanoscale Structural and Chemical Properties of Antipolar Clusters in Sm-Doped BiFeO3 Ferroelectric Epitaxial Thin Films

The local atomic structure and nanoscale chemistry of an antipolar phase in Bi{sub 0.9}Sm{sub 0.1}FeO{sub 3} epitaxial thin films are examined by an array of transmission electron microscopy (TEM) coupled with electron diffraction and electron energy-loss spectroscopy methods. The observations are tied to macroscopic properties of the films, namely, polarization-electric field hysteresis loops, dielectric constant-electric field hysteresis loops, and the dielectric loss. At room temperature, the local Sm deficiency was determined to destabilize the long-range ferroelectric state, resulting in the formation of local antipolar clusters with the appearance of PbZrO{sub 3}-like antiparallel cation displacements, which give rise to 1/4{l_brace}011{r_brace} and 1/4{l_brace}211{r_brace} reflections as well as 1/2{l_brace}321{r_brace}, because of in-phase oxygen octahedral tilts. Aberration-corrected TEM analysis reveals that the antipolar structure is actually a lamellar of highly dense ferroelectric domains with alternating polarizations. With increasing temperature, a phase transition was observed at 150 C, which is attributed to the reduction of the antiparallel displacements, giving way to cell-doubling structural transition.

36 MATERIALS SCIENCE↗