Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vanadium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

From spin induced ferroelectricity to spin and dipolar glass in a triangular lattice: The CuCr{sub 1−x}V{sub x}O{sub 2} (0≤x≤0.5) delafossite

The change from antiferromagnetism induced ferroelectricity to spin glass ferroelectric relaxor has been studied along the CuCr{sub 1−x}V{sub x}O{sub 2} (0≤x≤0.5) solid solution of polycrystalline samples. As x increases from CuCrO{sub 2} (x=0) to CuCr{sub 0.82}V{sub 0.18}O{sub 2}, it is found that the Néel temperature decreases from ∼24 K down to ∼13 K. This progressive weakening of the antiferromagnetism of CuCrO{sub 2} induces a rapid decrease of the spin induced ferroelectricity with polarization values going from ∼44 μC/m{sup 2} down to ∼1.5 μC/m{sup 2} for x=0.04 and x=0.08, respectively. Beyond x=0.18 (0.20≤x≤0.50), ac-magnetic susceptibility and magnetization measurements evidence a spin glass state while dielectric permittivity and polarization measurements point towards a relaxor behaviour. This shows that competing magnetic interactions in delafossites are an efficient way to transform a spin induced magnetoelectric into a multiglass (spin and dipolar) state. - Graphical abstract: The P(T) curves evidencing the aging effect on polarization in CuCr{sub 0.5}V{sub 0.5}O{sub 2}: E=135 kV/m is applied during cooling at different temperatures. The P values and the inflection point of the transition depend on the poling temperature suggesting a relaxor behaviour. This effect related to the spin glass state is not observed for the lowest vanadium content. - Highlights: • Samples of the CuCr{sub 1−x}V{sub x}O{sub 2} series have been studied. • The V content increase induces a change from antiferromagnetism to spin glass. • A behavior characterisitic of a spin and dipole glass is demonstrated. • The ferroelectricity is shown to go from spin induced to relaxor. • Competing magnetic interactions are efficient way to generate multiglass state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Behavior of the magnetocaloric effect and critical exponents in La{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}V{sub x}O{sub 3} manganite oxide

We have investigated the magnetocaloric effect along with magnetic phase transition and critical exponent analysis in mixed manganite La{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}V{sub x}O{sub 3} (0≤x≤0.15). To determine the nature of the paramagnetic to ferromagnetic phase transition, found to be of second-order, we performed a critical exponents study by dc-magnetization M(H,T) measurements around the Curie temperature T{sub C}. Modified Arrott plot method has been adopted to study the critical behavior of the compounds at their transition region, the values of critical exponents β, γ and δ are close to those expected for three-dimensional Heisenberg class with short-range interaction. A large magnetic entropy change |ΔS{sub M}| deduced from isothermal magnetization curves, has been observed in our samples with a peak centered on their respective T{sub C}. With increase in vanadium content, the temperature corresponding to the maximum entropy change as well as the magnetic transition temperature gradually shifts to low temperatures. The field dependence of the magnetic entropy change is also analyzed, which shows the power law dependence namely, ΔS{sub M}∝H{sup n}. Relative cooling power increases from 205 J/kg for x=0.00 to 258 J/Kg for x=0.15 making these materials a promising candidates for magnetic refrigeration near room temperature. - Graphical abstract: Scaling plot below and above T{sub C} using the β and γ exponents determined from the Arrot plot method of La{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}V{sub x}O{sub 3} for x=0.15. - Highlights: • The paramagnetic to ferromagnetic phase transition of La{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}V{sub x}O{sub 3} (0≤x≤0.15) is found to be of second-order. • The field dependence of the magnetic entropy shows the power law dependence namely, ΔS{sub M}∝H{sup n}. • Moderate values of −ΔS{sub M}{sup max} and RCP make the La{sub 0.67}Sr{sub 0.33}Mn{sub 1−x}V{sub x}O{sub 3} compounds potential candidates for magnetic refrigeration applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses and structural characterization of vanado-tellurites and vanadyl-selenites: SrVTeO{sub 5}(OH), Cd{sub 2}V{sub 2}Te{sub 2}O{sub 11}, Ca{sub 3}VSe{sub 4}O{sub 13}·H{sub 2}O and Ba{sub 2}VSe{sub 3}O{sub 10}

Four new quaternary vanado-tellurites and vanadyl-selenites, namely, SrVTeO{sub 5}(OH)(1), Cd{sub 2}V{sub 2}Te{sub 2}O{sub 11}(2), Ca{sub 3}VSe{sub 4}O{sub 13}·H{sub 2}O(3) and Ba{sub 2}VSe{sub 3}O{sub 10}(4) have been synthesized and structurally characterized by single crystal X-ray diffraction. The oxidation state of vanadium is +5 in tellurites 1 and 2 and +4 in selenites 3 and 4. The structures of SrVTeO{sub 5}(OH)(1) and Cd{sub 2}V{sub 2}Te{sub 2}O{sub 11}(2) compounds consist of (VTeO{sub 5}(OH)){sup 2-} and (V{sub 2}Te{sub 2}O{sub 11}){sup 4-}anionic chains respectively, which are built from tetrahedral VO{sub 4} and disphenoidal TeO{sub 4} moieties. Similarly the structures of Ca{sub 3}VSe{sub 4}O{sub 13}·H{sub 2}O(3) and Ba{sub 2}VSe{sub 3}O{sub 10}(4) respectively contain (VSe{sub 2}O{sub 7}){sup 2-} and (VSe{sub 3}O{sub 10}){sup 4-} anionic chains, which are made up of octahedral VO{sub 6} and pyramidal SeO{sub 3} units. Compounds 1 and 3 have been characterized by thermogravimetric and infrared spectroscopic methods. Compounds 1 and 2 are wide band gap semiconductors. - Graphical abstract: Ca{sub 3}VSe{sub 4}O{sub 13}·H{sub 2}O and Ba{sub 2}VSe{sub 3}O{sub 10} compounds contain (VSe{sub 2}O{sub 7}){sup 2-} and (VSe{sub 3}O{sub 10}){sup 4-} chains. - Highlights: • Four new vanado-tellurites and vanadyl-selenites are synthesized. • Their structural features are different. • The vanado-tellurites are wide band gap semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and magnetic properties of new γ-Ba(CoV{sub 1-x}P{sub x}O{sub 4}){sub 2} x = 0.4–0.5

The phase composition of the system BaCo{sub 2}(VO{sub 4}){sub 2}–Ba(CoPO{sub 4}){sub 2} has been studied. At room temperature two miscibility gaps have been detected, with the formation of substitutional solid solutions Ba(CoV{sub 1-x}P{sub x}O{sub 4}){sub 2} for x = 0.4–0.5 basing on the γ-BCPO structure type. An increase in the vanadium cation concentration leads to the stabilization of the rhombohedral crystal lattice. The crystallographic characteristics of two new phosphate - vanadates Ba(CoV{sub 0.5}P{sub 0.5}O{sub 4}){sub 2} and Ba(CoV{sub 0.6}P{sub 0.4}O{sub 4}){sub 2} isostructural to γ-BCPO have been obtained, their crystal structures have been described, and their magnetic properties have been analyzed. It was shown that in α-BCPO, as distinct from other examined phases, a three-dimensional ferromagnetic ordering characterized by a wide hysteresis loop takes place at low temperatures. The enhanced values of the magnetic moment in the paramagnetic phase BaCo{sub 2}(VO{sub 4}){sub 2} and solid solutions based on γ-BCPO are attributed to the peculiarities of the crystal environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of the extent of interphase precipitation in V-HSLA steels through in-situ characterization of the γ/α transformation

In-situ characterization techniques have been applied to elucidate the influence of γ/α transformation upon the extent of interphase precipitation in a low-carbon, vanadium-HSLA steel. Electron Back-scattered diffraction analyses of the γ/α orientation relationship with continuous cooling at 2 and 10 K/s suggest that the proportion of ferrite likely to hold interphase precipitation varies little with cooling rate. However, TEM analyses show that the interphase precipitation refines with increasing cooling rate in this cooling range. With cooling rates in excess of 20 K/s, interphase precipitation is increasingly suppressed due to the increasingly diffusional-displacive nature of the Widmanstätten γ/α transformation that is activated. The present study illustrates that the extent and dimensions of interphase precipitation can be controlled through controlled cooling. - Highlights: • In-situ characterization of γ/α transformation • EBSD characterization of γ/α transformation orientation relationship • Extent of interphase precipitation can be controlled through controlled cooling.

36 MATERIALS SCIENCE↗

Novel solar light driven photocatalyst, zinc indium vanadate for photodegradation of aqueous phenol

Graphical abstract: Novel photocatalyst, zinc indium vanadate (ZnIn{sub 2}V{sub 2}O{sub 9}) demonstrated and showed an excellent photocatalytic activity for phenol degradation under visible light. Research highlights: {yields} Designing and identification of a photocatalyst having prospective potential application to be used in visible light (400-800 nm). {yields} Successful synthesis of novel ZnIn{sub 2}V{sub 2}O{sub 9} by solid state route. {yields} Confirmation of the designed product using characterization techniques. {yields} Application study comprising photodegradation of aqueous phenol at visible light despite of UV radiations. -- Abstract: In the present investigation, we have demonstrated the synthesis of novel photocatalyst, zinc indium vanadate (ZIV) by solid-solid state route using respective oxides of zinc, indium and vanadium. This novel photocatalyst was characterized using XRD, FESEM, UV-DRS and FTIR in order to investigate its structural, morphological and optical properties. XRD clearly shows the formation of phase pure ZIV of triclinic crystal structure with good crystallinity. FESEM micrographs showed the clustered morphology having particle size between 0.5 and 1 {mu}m. Since, optical study showed the band gap around 2.8 eV, i.e. in visible region, we have performed the photocatalytic activity of phenol degradation under visible light irradiation. The photodecomposition of phenol by ZIV is studied for the first time and an excellent photocatalytic activity was obtained using this novel photocatalyst. Considering the band gap of zinc indium vanadate in visible region, it will also be the potential candidate for water splitting.

36 MATERIALS SCIENCE↗

Synthesis and characterization of supported heteropolymolybdate nanoparticles between silicate layers of Bentonite with enhanced catalytic activity for epoxidation of alkenes

Highlights: {yields} The PVMo and nanocomposite catalyst (PVMo/Bentonite) as catalyst for epoxidation of alkenes. {yields} The composite catalyst showed higher catalytic activity than parent heteropolymolybdate (PVMo). {yields}The use of ultrasonic irradiation increased the conversions and reduced the reaction times. {yields} The H{sub 2}O{sub 2} is a green and eco-friendly oxidant in this catalytic system. -- Abstract: A new heterogeneous catalyst (PVMo/Bentonite) consisting of vanadium substituted heteropolymolybdate with Keggin-type structure Na{sub 5}[PV{sub 2}Mo{sub 10}O{sub 40}].14H{sub 2}O (PVMo) supported between silicate layers of bentonite has been synthesized by impregnation method and characterized using X-ray diffraction, Fourier-transformed infrared spectroscopy, scanning electron microscopy, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy and elemental analysis. X-ray diffraction and scanning electron microscopy analysis indicated that PVMo was finely dispersed into layers of bentonite as support. The PVMo/Bentonite used as an efficient heterogeneous catalyst for epoxidation of alkenes. Various cyclic and linear alkenes were oxidized into the corresponding epoxides in high yields and selectivity with 30% aqueous H{sub 2}O{sub 2}. The catalyst was reused several times, without observable loss of activity and selectivity. The obtained results showed that the catalytic activity of the PVMo/Bentonite was higher than that of pure heteropolyanion (PVMo).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solution phase synthesis of Na{sub 0.28}V{sub 2}O{sub 5} nanobelts into nanorings and the electrochemical performance in Li battery

Graphical abstract: Hydrothermal method has been adopted first time to prepare Na{sub 0.28}V{sub 2}O{sub 5} nanorings/nanobelts without using any organic surfactant/solvents at 130–160 °C for 1–2 days. TEM analyses reveal that the products consist of nanorings of width about 500 nm and thickness of about 100 nm with inner diameter of 5–7 m. Nanobelts of width 70–100 nm and several tens of micrometers in length are observed. The electrochemical results show that Na{sub 0.28}V{sub 2}O{sub 5} exhibits an initial discharge capacity of 320 mAh g{sup −1} and its capacity still retained 175 mAh g{sup −1} even after 69 cycles. Highlights: ► We are the first to report Na{sub 0.28}V{sub 2}O{sub 5} nanorings/nanobelts by solution method. ► Synthesis via hydrothermal method at 130–160 °C/1–2d in acidic medium. ► We have carried out without using any surfactant/templates/organic solvents. ► Shows discharge capacity of 320 mAh g{sup −1} and reach 175 mAh g{sup −1} after 69 cycles. ► A probable reaction mechanism for Na{sub 0.28}V{sub 2}O{sub 5} nanorings formation is also proposed. -- Abstract: In this paper, we are the first to report a simple one step hydrothermal method to synthesize Na{sub 0.28}V{sub 2}O{sub 5} nanorings/nanobelts without using any organic surfactant/solvents at 130–160 °C for 1–2 days. The obtained products have been characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, morphology by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and electrochemical discharge–charge test for lithium battery. XRD pattern exhibit a monoclinic Na{sub 0.28}V{sub 2}O{sub 5} structure. FTIR spectrum shows band at 958 cm{sup −1} is assigned to V=O stretching vibration, which is sensitive to intercalation and suggests that Na{sup +} ions are inserted between the vanadium oxide layers. TEM analyses reveal that the products consist of nanorings of width about 500 nm and thickness of about 100 nm with inner diameter of 5–7 μm. Nanobelts of width 70–100 nm and several tens of micrometers in length are observed. The electrochemical results show that nanorings/nanobelts exhibit an initial discharge capacity of 320 mAh g{sup −1} and its capacity still retained 175 mAh g{sup −1} even after 69 cycles. We have discussed the possible growth mechanism for the formation of nanorings/nanobelts.

36 MATERIALS SCIENCE↗

Preparation and characterization of V/TiO{sub 2} nanocatalyst with magnetic nucleus of iron

Graphical abstract: - Highlights: • Fe-V/TiO{sub 2} nanocatalyst is prepared. • Combination of sol–gel and wetness impregnation methods. • Facile separation of catalyst from medium by magnet. - Abstract: A magnetic composite containing V/TiO{sub 2} was prepared by combination of sol–gel and wetness impregnation methods. The effects of synthesis temperature, different weight percents of Fe supported on TiO{sub 2}, vanadium loading and the heating rate of calcination on the structure and morphology of nanocatalyst were investigated. The optimum conditions for synthesized catalyst were 40 wt.% of Fe, 15 wt.% of V and synthesis temperature equal to 30 °C. Characterization of catalyst is carried out using XRD, TGA, DSC, SEM, FTIR and N{sub 2} physisorption measurements. The magnetic character of nanocatalyst was measured using VSM, which showed the typical paramagnetic behavior of sample at room temperature with a saturation magnetization value equal to 8.283 emu/g. The nanocatalyst has a particle size about 56 nm and can easily be separated from medium by a magnet.

36 MATERIALS SCIENCE↗

Ag{sub 2}O/Ag{sub 3}VO{sub 4}/Ag{sub 4}V{sub 2}O{sub 7} heterogeneous photocatalyst prepared by a facile hydrothermal synthesis with enhanced photocatalytic performance under visible light irradiation

Highlights: • The photocatalyst was hydrothermally prepared by adjusting the ratio of Ag to V. • Multi-phase Ag{sub 2}O/Ag{sub 3}VO{sub 4}/Ag{sub 4}V{sub 2}O{sub 7} obtained exhibited multi-morphological features. • The photocatalyst exhibited strong visible light driven photoactivity towards RhB. - Abstract: A novel Ag{sub 2}O/Ag{sub 3}VO{sub 4}/Ag{sub 4}V{sub 2}O{sub 7} photocatalyst was synthesized by adjusting the molar ratio of silver–vanadium (Ag–V) in a facile hydrothermal method to obtain multi-phase Ag{sub 2}O/Ag{sub 3}VO{sub 4}/Ag{sub 4}V{sub 2}O{sub 7} photocatalyst. The photocatalytic activity of the prepared samples was quantified by the degradation of Rhodamine B (RhB) model organic pollutant under visible light irradiation. Compared to pure Ag{sub 3}VO{sub 4}, Ag{sub 4}V{sub 2}O{sub 7} and P25 TiO{sub 2}, respectively, the as-synthesized multi-phase Ag{sub 2}O/Ag{sub 3}VO{sub 4}/Ag{sub 4}V{sub 2}O{sub 7} powders gave rise to a significantly higher photocatalytic activity, achieving up to 99% degradation of RhB in 2 h under visible light. This enhanced photocatalytic performance was attributed to the effect of the multi-phase Ag{sub 2}O/Ag{sub 3}VO{sub 4}/Ag{sub 4}V{sub 2}O{sub 7} photocatalyst and the surface plasmon resonance (SPR) of the incorporated metallic silver (Ag{sup 0}) nanoparticles (NPs) generated during the photocatalysis, as evidenced by post-use characterization, resulting in improved visible light absorption and electron-hole (e{sup −}-h{sup +}) separation. A mechanism was proposed for the photocatalytic degradation of RhB on the surface of Ag{sub 2}O/Ag{sub 3}VO{sub 4}/Ag{sub 4}V{sub 2}O{sub 7}.

36 MATERIALS SCIENCE↗

Sulvanite (Cu 3 VS 4 ) nanocrystals for printable thin film photovoltaics

Copper Vanadium Sulfide (Cu 3 VS 4 ), also known as sulvanite, has recently emerged as a suitable absorber material for thin film photovoltaics. The synthesis of Cu 3 VS 4 nanocrystals via a rapid solvothermal route is reported for the first time. The phase purity of the Cu 3 VS 4 nanocrystals has been confirmed by X-ray powder diffraction (XRD) and Raman spectroscopy, while the nanoparticle size, of about 10 nm, was evaluated by transmission electron microscopy (TEM). Successful ligand exchange with sulfide, an inorganic ligand, demonstrated that the nanoparticles are amenable to surface modifications, key element in solution processing. Further annealing of as-synthesized nanocrystals under a sulfur/argon atmosphere at 600 °C, rendered highly crystalline Cu 3 VS 4 powders exhibiting an impurity that could be potentially mitigated by annealing temperature optimization. Furthermore, Cu 3 VS 4 , formed solely from Earth-abundant elements, could provide an inexpensive, reliable approach to fabricating solution processed thin film photovoltaic absorbers.

36 MATERIALS SCIENCE↗

Fabrication and operational considerations of hydrogen permeable Mo 2 C/V metal membranes and improvement with application of Pd

Mo 2 C has previously been demonstrated as an effective catalyst layer to enable stable H 2 permeation through vanadium foils at high temperatures. Here, in this paper, this approach was extended to several group V metal foils (V, Nb, and Ta) as well as mixed gas testing. The best permeability was achieved with V, and an activation process was developed to recover the performance of V foils displaying evidence of oxidation. Nb foils yielded ~20% the permeability of V, while Ta was too brittle to operate effectively. Mo 2 C/V membranes were operated at feed conditions well above the ductile-to-brittle transition pressure without embrittlement; however, the H 2 permeability of Mo 2 C/V membranes was significantly attenuated at lower temperatures (< 600 °C). H 2 permeation was also severely inhibited by the presence of N 2 or CO 2 in mixed gas environments due to strong competitive adsorption. The addition of a Pd catalyst layer on top of Mo 2 C improved mixed gas stability and increased H 2 permeability to 2 × 10 -8 mol·m -1 ·s -1 ·Pa -0.5 at 500 °C for V based membranes. Lastly, as an interlayer, Mo 2 C was demonstrated to be a stable barrier preventing Pd-V interdiffusion at 500 °C while simultaneously allowing significant H 2 permeation.

08 HYDROGEN↗

Preactivated zeolite nanosheet plate-tiled membrane on porous PVDF film: Synthesis and study of proton-selective ion conduction

Preactivated MFI zeolite nanosheet plates (ZNPs) with large areas (~2.0 × 2.0 μm 2 ) and nanometer thicknesses (~60 nm) were prepared directly in liquid-dispersed state. The individual ZNP was a stack of 4-nm-thick single crystalline zeolite nanosheets (ZNs) interlinked by Si–O–Si bonds between neighboring ZN surfaces. The dispersed open-pore ZNPs allowed formulating suspensions for tiling ZNP membranes on polymer substrates without requiring post-coating activation. A pinhole-free ZNP-tiled (ZNPT) membrane has been achieved on macroporous PVDF film by a self-repairing vacuum-assisted filtration coating method. The resultant ZNPT layer was ~500 nm-thick consisting of about 7 ZNP layers with inter-ZNP width and inter-ZNP entrance porosity around 9 nm and 2%, respectively. The ZNPT-PVDF membrane exhibited high selectivity to proton transport over vanadyl ion and low resistances to proton conduction in aqueous solutions. The membrane also demonstrated to function as an efficient ion separator for the vanadium redox flow battery. The reported synthesis of preactivated ZNP suspension may overcome the major hurdle to realizing polymer-supported ZN membranes, which is the inefficiency of existing methods in obtaining readily dispersible open-pore ZNs. Finally, the ZNPT-PVDF membrane can be a more affordable and sustainable alternative to the Nafion-based ion separation membranes.

36 MATERIALS SCIENCE↗

Stoichiometric metal nitration based novel green synthesis of mesoporous metal oxides and their enhanced heterogeneity

Here, in this work, a general and novel method for the green synthesis of mesoporous metal oxides via stoichiometric metal nitration has been demonstrated. Pluronic surfactants and their effect on synthesis procedures in terms of surface area have been experimentally studied in detail. Contrary to the traditional synthesis procedure, water has been utilized as the solvent and in several cases, such as tin oxide, manganese oxide, aluminum oxide, antimony oxide, zinc oxide, cobalt oxide, copper oxide, yttrium oxide, lanthanum oxide, and silver either the highest or comparable surface areas have been successfully synthesized. Through XRD, and TEM, all materials were observed to be crystalline except silver and magnesium oxide. SEM shows that with an increase in surfactant molar mass agglomeration decreases. Ammonia chemisorption on acidic materials gives quantitative amounts of ammonia chemical bonding with catalysts, whereas carbon dioxide chemisorption gives a quantitative value of CO 2 chemical binding with basic sites. As high as 1901.8 μmol/g and 994.6 μmol/g ammonia chemisorption values for oxides of vanadium and tin were achieved. Amphoteric materials give both acidic and basic enhanced adsorption. Finally, all synthesized materials are studied under organic catalytic transformations. Benzyl bromide is theoretically more active compared with benzylamine and benzyl alcohol which was also experimentally shown through the conversion.

36 MATERIALS SCIENCE↗

Atomic-scale understanding of the electronic structure-crystal facets synergy of nanopyramidal CoPi/BiVO 4 hybrid photocatalyst for efficient solar water oxidation

The observation of a spontaneous electron enrichment at the apexes of bismuth vanadate (BiVO 4 ) nanopyramidal arrays is achieved by performing synchrotron-based angular dependent X-ray absorption spectroscopy. In accordance with density function theory calculations, the formation of (112) facets enriched apexes is proposed. Such intrinsically electron-enriched (112) facets at the apexes produce a potential facilitating the diffusion of photoexcited holes, which not only mitigates the recombination with the photoexcited electrons, but also provide an active reaction site for the photoassisted selective growth of cobalt phosphate (CoPi), a well known and highly active co-catalyst for water oxidation at the apex of BiVO 4 nanopyramids. Benefiting from the element-resolved properties of synchrotron-based X-ray spectroscopy, 3d electrons on the vanadium site are directly resolved by resonant inelastic X-ray scattering measurements. Due to this unique morphology, the charge at the apex is expected to induce a strong interaction with CoPi, as a result of the metal-to-ligand charge transfer spectroscopy feature observed from the cobalt site. Substantial evidences are collected by means of comprehensive soft X-ray spectroscopy techniques with high spectral resolution revealing the atomic-scale origin and the nature of the synergy as well as the strong correlation between its unique structural properties and the electronic structure of this novel highly-ordered hybrid photocatalyst and its significantly improved photoelectrochemical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy dependence of the flux and elastic resolution for the ARCS neutron spectrometer

A series of vanadium calibration measurements for a wide range of incident energies was performed for the ARCS direct geometry chopper spectrometer at the Spallation Neutron Source. Analytical modeling combined with Monte Carlo neutron ray-tracing simulations was used to analyze the measured elastic resolution and flux dependence on incident energy at various combinations of Fermi chopper choice and frequencies. Furthermore, these data and model will be useful for planning experiments at ARCS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulating self-powered neutron detector responses to infer burnup-induced power distribution perturbations in next-generation light water reactors

Understanding how 3D power distribution will be monitored throughout reactor core volumetric space in next-generation nuclear power reactors is crucial to the design, deployment, and licensing of these reactors. Although numerous techniques exist for 3D power distribution monitoring based on the response of both in situ and ex situ sensors currently implemented or proposed for use in the US reactor fleet, crucial details about these techniques are often unclear. The publicly available documentation does not include information such as how well these techniques are characterized and optimized in their implementations and the levels of uncertainty in the inferred 3D power distribution. The work described herein investigated a recently developed 3D power distribution inferencing method as applied to two next-generation reactor simulations: (1) the NuScale small modular reactor design and (2) the Westinghouse AP1000 design, both of which contain in-core strings of vanadium self-powered neutron detectors (SPNDs). This investigation considered a range of SPND string sensor densities, as well as a range of 3D power distribution axial segment sizes. In this work, SPND response simulation is informed by neutron flux calculations in representative homogenized cores. For the different sensor densities and power distribution axial segment sizes in these simulations, the average solution error, solver iterations, and run time were tracked to parameterize the sensor-core configuration.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗