Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Phase Transitions in Tetramethylammonium Hexachlorometalate Compounds (TMA) 2 MCl 6 (M = U, Np, Pt, Sn, Hf, Zr)

A study of the phase transitions occurring in tetramethylammonium hexachlorometalate compounds with M = U IV , Np IV , Zr IV , Sn IV , Hf IV and Pt IV were performed using single-crystal X-ray diffraction across the temperature range 120 - 400K. When the crystals were cooled, movement of the octahedral [MCl 6 ] 2- anions induces a phase transition from Fm3m to Fd3c with a doubling of the unit cell. For the actinide compounds, no correlation between the f-electron configuration and the transition temperature was observed, instead, a correlation between the transition temperatures and both the [MCl 6 ] 2- anion and the TMA cation size is highlighted. Two phase transitions were observed and characterized. The first phase transition occurs with the ordering of the TMA cation and the second from a rotation of the [MCl 6 ] 2- octahedra. A third phase transition was observed at lower temperatures and was ascribed to a tetragonal distortion of the [MCl 6 ] 2- anions. Synthesis and study of their deuterated compounds did not show a significant isotope effect. As a result, Raman spectra performed on the protonated and deuterated compounds indicate only weak hydrogen bonding interactions between the TMA cations and the [MCl 6 ] 2- octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

General trends of dihedral conformational transitions in a globular protein

In this paper, dihedral conformational transitions are analyzed systematically in a model globular protein, cytochrome P450cam, to examine their structural and chemical dependences through combined conventional molecular dynamics (cMD), accelerated molecular dynamics (aMD) and adaptive biasing force (ABF) simulations. The aMD simulations are performed at two acceleration levels, using dihedral and dual boost, respectively. In comparison with cMD, aMD samples protein dihedral transitions approximately two times faster on average using dihedral boost, and ~3.5 times faster using dual boost. In the protein backbone, significantly higher dihedral transition rates are observed in the bend, coil, and turn flexible regions, followed by the β bridge and β sheet, and then the helices. Moreover, protein side chains of greater length exhibit higher transition rates on average in the aMD-enhanced sampling. Side chains of the same length (particularly Nχ = 2) exhibit decreasing transition rates with residues when going from hydrophobic to polar, then charged and aromatic chemical types. The reduction of dihedral transition rates is found to be correlated with increasing energy barriers as identified through ABF free energy calculations. In conclusion, these general trends of dihedral conformational transitions provide important insights into the hierarchical dynamics and complex free energy landscapes of functional proteins.

59 BASIC BIOLOGICAL SCIENCES↗

Magnetostructural phase transitions and magnetocaloric effect in (Gd 5-x Sc x )Si 1.8 Ge 2.2

Future advancements in magnetocaloric refrigeration/heat pumping technologies depend on the discovery of new materials that demonstrate large, tunable magnetocaloric effects (MCEs) in the vicinity of coupled magnetic and structural phase transitions that occur reversibly with minimum hysteresis. Here, with this in mind, we investigate phase transitions, microstructure, magnetic, thermal, magnetocaloric, and transport properties of (Gd 5-x Sc x )Si 1.8 Ge 2.2 compounds. Replacement of magnetic Gd with non-magnetic Sc in Gd 5-x Sc x Si 1.8 Ge 2.2 increases the ferromagnetic to paramagnetic first order phase transition temperature, T C , with only a minor reduction in MCE when x ≤ 0.2. We also demonstrate that hydrostatic pressure further increases T C and reduces the hysteresis of the first order phase transition in Gd 4.8 Sc 0.2 Si 1.8 Ge 2.2 from 7 to 4 K. Temperature-dependent x-ray powder diffraction study of Gd 4.8 Sc 0.2 Si 1.8 Ge 2.2 confirms the monoclinic ↔ orthorhombic structural transformation at T C , in agreement with magnetic, calorimetric, and electrical transport measurements. In addition to the substantial magnetocaloric effect, a large magnetoresistance of ~20% is also observed in Gd 4.8 Sc 0.2 Si 1.8 Ge 2.2 for ΔH = 50 kOe in the vicinity of the magnetostructural transition. Finally, in a drastic reversal of the initial doping behavior further additions of Sc (x > 0.2) suppress formation of the monoclinic phase, change the nature of the transition from first-to second-order, and reduce both the transition temperature and magnetocaloric effect.

36 MATERIALS SCIENCE↗

Observable measurement-induced transitions

One of the main postulates of quantum mechanics is that measurements destroy quantum coherence (wave function collapse). Recently it was discovered that in a many-body system dilute local measurements still preserve some coherence across the entire system. As the measurement density is increased, a phase transition occurs that is characterized by the disentanglement of different parts of the system. Unfortunately, this transition is impossible to observe experimentally for macroscopic systems because it requires an exponentially costly full tomography of the many-body wave function or a comparison with the simulation on an oracle classical computer. In this work we report the discovery of another measurement-induced phase transition that can be observed experimentally if quantum dynamics can be reversed. On one side of this phase transition the quantum information encoded in some part of the Hilbert space is fully recovered after the time inversion. On the other side, all quantum information is corrupted. This transition also manifests itself as the change in the behavior of the probability to observe the same measurement outcome in the process that consists of identical blocks repeated many times. In each block the unitary evolution is followed by the measurement. On one side of the transition the probability decreases exponentially with the number of repetitions, on the other it tends to a constant as the number of repetitions is increased. We confirm the existence of the proposed phase transition through numerical simulations of realistic quantum circuits and analytical calculations using an effective random-matrix theory model.

Measurement-induced phase transitions↗

Effects of cluster expansion on the locations of phase transition boundary as a first step to quantify uncertainty in first principles statistical mechanics framework

Predicting phase diagrams from first principle calculations eliminates the need of tedious experimental trials and errors. Fully automating first principle phase diagram calculations without any sort of human intervention has been a long daunting task and troubling scientific communities for decades. This grand problem remains not fully resolved, largely due to the vastly high-dimensional parameter space associated with density functional theory, cluster expansion, lattice Monte Carlo, and the substantial uncertainty propagating through a set of complex simulations. As a first step to tackle this grand problem, we reported a first demonstration of how sensitive phase boundary locations can be to various cluster expansion fittings and input DFT training data. To the best knowledge of the authors, this study reported the first ever attempt to quantify uncertainty in first principles statistical mechanics framework. In addition, a semi-automated phase transition detection algorithm has been devised in this paper to deal with the associated statistical errors and uncertainties from Monte Carlo method and its predecessor DFT calculations and cluster expansions. This algorithm has been applied in a classical cluster expansion Mg-Cd binary alloy system to detect phase transitions at various locations of phase diagram using different cluster expansions to demonstrate its predictive power and quantify uncertainties. The results suggested that using Chebyshev basis function shifted the transition locations toward the dilute solid solution phase and expanded the phase stability of concentrated ordered phases to wider composition range. The addition of perturbed defect configurations into training data set lowered the order-disorder transition temperature to be away from true transition temperature, suggesting the transition nature is indeed configurational disorder dominated rather than defect assisted. Finally, we found that the weighting has negligible effect on the transition locations, except for the case of using Chebyshev basis function to fit all non-weighted configurations that can be susceptible to Monte Carlo sampling hysteresis.

36 MATERIALS SCIENCE↗

Solid-state phase transitions of two quaternary metallic fuel alloys (U-2.5Mo-2.5Ti-5.0Zr and U-1.5Mo-1.5Ti-7.0Zr in wt. %)

This study focuses on the solid-state phase transitions of two quaternary fuel alloys for fast reactors: U-1.5Mo-1.5Ti-7.0Zr (U-MT7Z) and U-2.5Mo-2.5Ti-5.0Zr (U-MT5Z). Here, the phase transitions were determined by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). To identify the high temperature phases, the alloys were annealed at 873K, 948K, 1023K, and 1123K (all under 72 hours). Combining those characterizations, the phase transitions are determined. In U-MT7Z, there is one phase transition observed, and it is ascribed to α + U 2 Ti → γ transition. In U-MT5Z, two transitions are found. The first transition is α → γ, while the second is U 2 Ti → γ. The γ phase onset temperature of U-MT5Z is lower than that of U-MT7Z due to the higher Mo content.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of transition element doping on crystal structure of rare earth borosilicides REB{sub 44}Si{sub 2}

On a previous study on samples of doped-YB{sub 44}Si{sub 2}, an improvement of thermoelectric properties has been achieved. Regarding the interesting effect of the doping of transition elements on the thermoelectric properties, a single crystal study has been carried out on Zn doped, Rh doped and Ni doped samples to assess how the transition element doping affects the crystal structure. Refinements were carried out based on the structural model solution of YB{sub 44}Si{sub 2} reported in a previous study. Variations in the silicon contents were found in the doped single crystals. Splitting of partially occupied sites has also been detected for some of the doped samples. In this paper we present differences in the partial occupations of boron and silicon sites. Possibility of transition elements insertions based on the differences in crystal structures will be presented. - Graphical Abstract: New transition elements doped YB{sub 44}Si{sub 2} were synthesized and have nominal compositions YB{sub 41.1}Si{sub 1.1}Rh{sub 0.02} and YB{sub 41}Si{sub 1.3}Ni{sub 0.06}. Insertion of transition elements into the crystal structure of YB{sub 44}Si{sub 2} leads to the transformation of B{sub 12} icosahedra into B{sub 11} polyhedrons for a few percent of them. Highlights: > Differences in the partial occupations of boron and silicon sites{yields}Possibility of transition elements insertions. > Mixed occupancy of split positions. > Insertion of transition elements between B{sub 12} icosahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A quaternary lead based perovskite structured materials with diffuse phase transition behavior

Graphical abstract: (a) Curie-Weiss plot for the inverse of the relative dielectric permittivity and (b) log (1/{epsilon} - 1/{epsilon}{sub m}) as function of log (T - T{sub m}) for ceramics at 1 kHz. Highlights: Black-Right-Pointing-Pointer Retaining phase pure structure with quaternary complex stoichiometric compositions. Black-Right-Pointing-Pointer P-E loops with good saturation polarization (P{sub s} {approx} 30.7 {mu}C/cm{sup 2}). Black-Right-Pointing-Pointer Diffused relaxor phase transition behavior with {gamma} estimated is {approx}1.65. -- Abstract: A lead based quaternary compound composed of 0.25(PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}) + 0.25(PbFe{sub 0.5}Ta{sub 0.5}O{sub 3}) + 0.25 (PbF{sub 0.67}W{sub 0.33}O{sub 3}) + 0.25(PbFe{sub 0.5}Nb{sub 0.5}O{sub 3}) - (PZT-PFT-PFW-PFN) was synthesized by conventional solid-state reaction techniques. It showed moderate high dielectric constant, low dielectric loss, and two diffuse phase transitions, one below the room temperature {approx}261 K and other above {approx}410 K. X-ray diffraction (XRD) patterns revealed a tetragonal crystal structure at room temperature where as scanning electron micrograph (SEM) indicates inhomogeneous surface with an average grain size of 500 nm-3 {mu}m. Well saturated ferroelectric hysteresis loops with good saturation polarization (spontaneous polarization, P{sub s} {approx} 30.68 {mu}C/cm{sup 2}) were observed. Temperature-dependent ac conductivity displayed low conductivity with kink in spectra near the phase transition. In continuing search for developing new ferroelectric materials, in the present study we report stoichiometric compositions of complex perovskite ceramic materials: (PZT-PFT-PFW-PFN) with diffuse phase transition behavior. The crystal structure, dielectric properties, and ferroelectric properties were characterized by XRD, SEM, dielectric spectroscopy, and polarization. 1/{epsilon} versus (T) plots revealed diffuse relaxor phase transition (DPT) behavior. The compositional variation on the phase transition temperature, dielectric constant, and ferroelectric to paraelectric phase transitions are discussed.

36 MATERIALS SCIENCE↗

Phase transitions, dielectric properties, and vibrational study of stannates perovskites Sr{sub 1−x}Er{sub x}SnO{sub 3−δ}

Graphical abstract: The diffuseness of the phase transition of the Sr{sub 1−x}Er{sub x}SnO{sub 3−δ} enhances with the increasing of erbium content. These compounds were found to undergo phase transitions with increasing temperature. - Highlights: • Substitution Sr/Er in the alkaline earth cage modifies the thermally induced disorder. • Two phase transitions have been observed by DSC. • The dielectric constant increases with erbium substitution. • Dielectric loss increases exponentially with temperature. • The conductivity contribution is mainly due to hopping process. - Abstract: A polycrystalline stannates perovskites Sr{sub 1−x}Er{sub x}SnO{sub 3−δ} (x = 0.00, 0.01 and 0.03) were synthesized by sol–gel method and their vibrational properties were investigated using Raman scattering. The substitution of Er in the Sr site, results in a slight change of the position of the Raman spectrum bands. The differential scanning calorimetry (DSC) shows two phase transitions at 532 K and 634 K for Sr{sub 0.99}Er{sub 0.01}SnO{sub 3−δ}. The dielectric behavior of each solid solution (x = 0.01 and x = 0.03) has been studied as a function of temperature and frequency and has confirmed the observed phase transitions. The diffuseness of the phase transitions of these materials enhances with the increasing of erbium content. The dielectric constant showed a strong increase near the phase transitions temperature which value depends with frequency. This phenomenon is usually observed in relaxor materials. The conduction and the dielectric relaxation are attributed to hopping of electrons among Sn{sup 2+} and Sn{sup 4+} ions.

36 MATERIALS SCIENCE↗

Reentrant glass transition leading to ultrastable metallic glass

Polyamorphs are often observed in amorphous matters, and a representative example is the reentrant glass transition in colloid systems. For metallic amorphous alloys, however, the cases reported so far are limited to metallic glasses (MGs) that undergo electronic transitions under gigapascal applied pressure, or the presence of two liquids at the same composition. In this paper, we report the first observation of a reentrant glass transition in MGs. This unusual reentrant glass transition transforms an MG from its as-quenched state (Glass I) to an ultrastable state (Glass II), mediated by the supercooled liquid of Glass I. Specifically, upon heating to above its glass transition temperature under ambient pressure, Glass I first transitions into its supercooled liquid, which then transforms into a new Glass II, accompanied by an exothermic peak in calorimetric scan, together with a precipitous drop in volume, electrical resistance and specific heat, as well as clear evidence of local structural ordering on the short-to-medium-range scale revealed via in-situ synchrotron X-ray scattering. Atomistic simulations indicate enhanced ordering of locally favored motifs to establish correlations in the medium range that resemble those in equilibrium crystalline compounds. The resulting lower-energy Glass II has its own glass transition temperature higher than that of Glass I by as much as 50 degrees. This route thus delivers a thermodynamically and kinetically ultrastable MG that can be easily retained to ambient conditions.

36 MATERIALS SCIENCE↗

Redesigning large-scale multimodal transit networks with shared autonomous mobility services

Here, this study addresses a large-scale multimodal transit network design problem, with Shared Autonomous Mobility Services (SAMS) as both transit feeders and an origin-to-destination mode. The framework captures spatial demand and modal characteristics, considers intermodal transfers and express services, determines transit infrastructure investment and path flows, and generates transit routes. A system-optimal multimodal transit network is designed with minimum total door-to-door generalized costs of users and operators, satisfying transit origin-destination demand within a pre-set infrastructure budget. Firstly, the geography, demand, and modes in each zone are characterized with continuous approximation. The decisions of network link investment and multimodal path flows in zonal connection optimization are formulated as a minimum-cost multi-commodity network flow (MCNF) problem and solved efficiently with a mixed-integer linear programming (MILP) solver. Subsequently, the route generation problem is solved by expanding the MCNF formulation to minimize intramodal transfers. The model is illustrated through a set of experiments with the Chicago network comprised of 50 zones and seven modes, under three scenarios. The computational results present savings in traveler journey time and operator cost demonstrating the potential benefits of collaboration between multimodal transit systems and SAMS.

Autonomous vehicles↗

Mechanisms of Semiconducting 2H to Metallic 1T Phase Transition in Two-dimensional MoS 2 Nanosheets

In the present work, phase transition mechanisms from semiconducting 2H phase to metallic 1T phase in MoS 2 nanosheets were studied using density functional theory (DFT) method. Various 2H→1T phase transition mechanisms that consist of nucleation and propagation steps, which simulated by collective rotational and rotational/translational movements, single atom translational movement, as well as the gliding movement of one row for sulfur (S) atoms, on both the basal plane and Mo- and S-edges with different S coverages were investigated. On the perfect basal plane, the 1T phase nucleation is unlikely due to the extremely high barrier of 2.25 eV/atom. Whereas the presence of defective S vacancies on the basal plane dramatically facilitate the 1T phase nucleation and propagation around the defective sites by the collective rotational movement of three S atoms. On the 2H phase basal plane with two S vacancies, the kinetic barriers for the 1T phase nucleation are as low as of 0.66~0.77 eV/atom. Like the promoting effect of S vacancies on the phase transition over the basal plane, DFT results suggest that the S coverage on the Mo- and S-edges will affect the 1T phase nucleation and propagation. The 1T phase nucleation starting with the translational movement of single S atom on the bare Mo-edge and the gliding movement of an entire row of S atoms on the S-edge with 50%S coverage are kinetically favorable. While the 1T phase formation at the Mo-edge with 50%S coverage and the S-edge with 100% S coverage are unlikely. The present work not only confirms the important role of S vacancies/coverages in the 2H-1T phase transition, but also provides new insight into how and where the 2H-1T phase transition occurs at the atomic level, which also sheds light on the general phase transition mechanism for two-dimensional transition metal dichalcogenide materials. The work was financially supported by the National Natural Science Foundation of China (No. 21476012, 21571012, and 91534201). Q. Jin appreciates the joint Ph.D. scholarship support from the China Scholarship Council. The computing time was granted by a scientific theme user proposal in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at PNNL in Richland, Washington. D. Mei is supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.

Molybdenum disulfide, phase transition, sulfur vac↗

An Atom-Precise Approach to Damp First-Order Phase Transitions and Its Implications for Neuromorphic Signal Processing

Neuromorphic computing inspired by mammalian intelligence aims to emulate the nonlinear dynamics of biological neurons and synapses to achieve fast, low-energy, and highly efficient information processing. Brain-inspired computing relies on the design and discovery of materials exhibiting nonlinear current–voltage profiles, frequently underpinned by electronic state transitions, to achieve spiking neurons and dynamically tunable synapses. A signature challenge in the design of artificial neurons is controlling the steepness of first-order transitions in active elements, as abrupt transitions are at risk of driving unstable voltage and temperature oscillations, which result in catastrophic device failure. A critical knowledge gap is the lack of structure–function correlations mapping the composition and atomistic structure of crystalline solids to nonlinear dynamical response characteristics. Here, we address the key question of how modification of atomistic structure correlates with alteration of neuron-like functionality. Constructing oscillator circuits from millimeter-scale single crystals enables high-resolution atomic structure solutions, which we use to demonstrate that the selective positioning of Pb cations modifies charge ordering along a one-dimensional CuxV2O5 framework even at low insertion stoichiometries, thereby providing an atom-precise design parameter for damping first-order transitions. We use temperature-variant X-ray diffraction and X-ray spectroscopy to elucidate the suppression of Cu-ion shuttling based on the precise positioning of Pb ions in seven-coordinated tunnel interstitial sites as the mechanistic basis for transition broadening, thus bridging a critical gap between statistical mechanics and quantum chemical descriptions of phase transitions. Such mechanistic understanding thus paves the way to site-selective modification strategies for modulating the sharpness of first-order transitions, with an exemplary demonstration here in tuning neuronal signal processing.

Crystal structure↗

Ferroelectric phase-transition frustration near a tricritical composition point

Phase transition describes a mutational behavior of matter states at a critical transition temperature or external field. Despite the phase-transition orders are well sorted by classic thermodynamic theory, ambiguous situations interposed between the first- and second-order transitions were exposed one after another. Here, we report discovery of phase-transition frustration near a tricritical composition point in ferroelectric Pb(Zr 1-x Ti x )O 3 . Our multi-scale transmission electron microscopy characterization reveals a number of geometrically frustrated microstructure features such as self-assembled hierarchical domain structure, degeneracy of mesoscale domain tetragonality and decoupled polarization-strain relationship. Associated with deviation from the classic mean-field theory, dielectric critical exponent anomalies and temperature dependent birefringence data unveil that the frustrated transition order stems from intricate competition of short-range polar orders and their decoupling to long-range lattice deformation. With supports from effective Hamiltonian Monte Carlo simulations, our findings point out a potentially universal mechanism to comprehend the abnormal critical phenomena occurring in phase-transition materials.

42 ENGINEERING↗

Shape phase transitions and critical points

We investigate different aspects connected with shape phase transitions in nuclei and the possible occurrence of dynamical symmetries at the critical points. We discuss in particular the behaviour of the neighbour odd nuclei at the vicinity of the critical points in the even nuclei. We consider both the case of the transition from the vibrational behaviour to the gamma-unstable deformation (characterized within the collective Bohr hamiltonian by the E(5) critical point symmetry) and the case of the transition from the vibrational behaviour to the stable axial deformation (characterized by the X(5) symmetry). The odd particle is assumed to be moving in the three single particle orbitals j = 1/2,3/2,5/2, a set of orbitals that is known to lead to possible supersymmetric cases. The coupling of the odd particle to the Bohr hamiltonian does lead in fact in the former case at the critical point to the E(5/12) boson-fermion dynamical symmetry. An alternative approach to the two shape transitions is based on the Interacting Boson Fermion Model. In this case suitably parametrized boson-fermion hamiltonians can describe the evolution of the odd system along the shape transitions. At the critical points both energy spectra and electromagnetic transitions were found to display characteristic patterns similar to those displayed by the even nuclei at the corresponding critical point. The behaviour of the odd nuclei can therefore be seen as necessary complementary signatures of the occurrence of the phase transitions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Interband electronic transitions and phase transformation of multiferroic Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} ceramics revealed by temperature-dependent spectroscopic ellipsometry

Optical properties and phase transition of Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} (BLFTO) ceramics with different composition (0.02 ≤ x ≤ 0.10, 0.01 ≤ y ≤ 0.06) have been investigated by spectroscopic ellipsometry (SE) in the temperature range of −70–450 °C. The real part of the complex dielectric function ε{sub 1} increases with the temperature. Meanwhile, the imaginary part ε{sub 2} in the low-energy region decreases with the temperature and has an opposite trend in the high-energy side. Four typical interband transitions (E{sub a} ∼ 2.50 eV, E{sub b} ∼ 2.70 eV, E{sub c} ∼ 3.60 eV, and E{sub d} ∼ 4.25 eV) can be observed from the second derivative of the complex dielectric functions with aid of the standard critical point model. The critical point (CP) transition becomes broadening and shifts to a lower energy side as La and Ti compositions increase. Moreover, the CP transition energies show a red-shift trend with increasing the temperature until 320 °C, due to the lattice thermal expansion and electron-phonon interaction. The typical interband transitions and partial spectral weight present anomalies in the proximity of antiferromagnetic transition owing to the coupling between magnetic and ferroelectric order parameters and spin-lattice coupling for BLFTO multiferroic materials. It was found that the Néel temperature of BLFTO ceramics decreases from 364 to 349 °C with increasing doping composition of La and Ti elements. These phenomena can be attributed to the modification of electronic structure and magnetic order because the differences of electronegativity and ionic radii between Bi and La, Fe and Ti induce the variations on the bond angle and bond length between cations and anions. Moreover, the substitution for magnetic Fe{sup 3+} ions with nonmagnetic Ti{sup 4+} ions can reduce the exchange interaction between adjacent magnetic moments. Therefore, SE technique can be sensitive for detecting the phase/structural transitions of multiferroic oxides.

36 MATERIALS SCIENCE↗

Structural, vibrational, and electronic topological transitions of Bi 1.5 Sb 0.5 Te 1.8 Se 1.2 under pressure

Topological insulators have been the subject of intense research interest due to their unique surface states that are topologically protected against scattering or defects. However, the relationship between the crystal structure and topological insulator state remains to be clarified. Here, we show the effects of hydrostatic pressure on the structural, vibrational, and topological properties of the topological insulator Bi 1.5 Sb 0.5 Te 1.8 Se 1.2 up to 45 GPa using X-ray diffraction and Raman spectroscopy in a diamond anvil cell, together with first-principles theoretical calculations. Two pressure-induced structural phase transitions were observed: from ambient rhombohedral R3¡m phase to a monoclinic C2/m phase at ~13 GPa, and to a disordered I4/mmm phase at ~22 GPa. In addition, the alloy undergoes several electronic transitions within the R3¯m phase: indirect to direct bulk band gap transition at ~5.8 GPa, bulk gap closing with an appearance of Dirac semimetal (DSM) state at ~8.2 GPa, and to a trivial semimetal state at ~12.1 GPa. Anomalies in c/a ratio and Raman full width at half maximum that coincide with the DSM phase suggest the contribution of electron-phonon coupling to the transition. Here, compared to binary end members Bi 2 Te 3 , Bi 2 Se 3 , and Sb 2 Te 3 , the structural phase transition and anomaly were observed at higher pressures in Bi 1.5 Sb 0.5 Te 1.8 Se 1.2 . These results suggest that the topological transitions are precursors to the structural phase transitions.

42 ENGINEERING↗

Radiative one- and two-electron transitions into the empty K shell of He-like ions

The branching ratios between the single and double electron radiative transitions to empty K shell in He-like ions with 2s2p configuration are evaluated for 15 ions with 4{<=}Z{<=}26 using fully relativistic multiconfiguration Dirac-Fock wavefunctions in the active space approximation. The effects of configuration interaction and Breit contributions on the transition parameters have been analyzed in detail. Though the influence of Breit interaction on the electric dipole allowed one-electron radiative transitions is negligible, it substantially changes the spin-forbidden rates and the two-electron one-photon transition probabilities. Also, while the single electron transition rates are gauge independent, the correlated double-electron probabilities are found to be gauge sensitive. The probable uncertainties in the computed transition rates have been evaluated by considering the line strengths and the differences between the calculated and experimental transition energies as accuracy indicators. The present results are compared with other available experimental and theoretical data.

74 ATOMIC AND MOLECULAR PHYSICS↗