Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Ocean wind field measurement performance of the ERS-1 scatterometer

The Active Microwave Instrumentation (AMI), which will be implemented on the ERS-1, is a 5.3 GHz multipurpose radar for land surface imaging, ocean wave spectrum measurement and wind observations over oceans. The imaging and wave measurements apply Synthetic Aperture Radar (SAR) techniques, while wind field detection is performed by the Scatterometer as part of the AMI. The Scatterometer system design was developed and optimized with the aid of a performance simulator. This paper, aimed at giving an overview, is presented about the: (1) ERS-1 Scatterometer system design; (2) Error budget; and the (3) Overall calibration concept.

Hans, P.↗

Backscattering coefficient of a perturbed sinusoidal surface

A coherent model for scattering from a randomly perturbed periodic surface is developed using the Kirchhoff approximation. It is intended to model wave scattering from ground surfaces with row directions. Results are illustrated and compared with an incoherent scatter model and measured backscattering angular curves from ploughed fields.

Eom, H. J.↗

Implications of the Vega balloon results for Venus atmospheric dynamics

During the Vega Venus balloon mission, data on the thermodynamic state of the atmosphere were obtained as well as wind and cloud information. Explanations are provided for the following: (1) the large amplitude atmospheric vertical winds encountered by the Vega balloons, (2) the observed 6.5 K temperature difference consistently measured between the two Vega balloons, and (3) the apparent influence of surface topography on atmospheric motions seen by the Vega-2 balloon as it flew over mountainous terrain (known as Aphrodite). It is believed that vertical winds of the magnitude encountered by the Vega-2 balloon over Aphrodite may be the result of surface-induced gravity waves.

Young, R.↗

Intensive MHD-structures penetration in the middle atmosphere initiated in the ionospheric cusp under quiet geomagnetic conditions

In connection with the recently detected quasiperiodical magnetic disturbances in the ionospheric cusp, the penetration of compressional surface magnetohydrodynamic (MHD) waves through the middle atmosphere is modelled numerically. For the COSPAR International Reference Atmosphere (CIRA) 72 model the respective energy density flux of the disturbances in the middle atmosphere is determined. On the basis of the developed model certain conclusions are reached about the height distribution of the structures (energy losses, currents, etc.) initiated by intensive magnetic cusp disturbances.

Mateev, L. N.↗

Guided waves and defect scattering in metal matrix composite plates

Guided Rayleigh-Lamb waves in a continuous graphite fiber reinforced magnesium plate has been studied. The interest in this material arises from its high thermal stability and because it provides high strength-to-weight ratio. Previous studies have shown that for wavelengths much larger than the fiber diameters and spacing, the material can be characterized as transversely isotropic with the symmetry axis aligned with the fiber direction. Because of the high longitudinal stiffness of the graphite fibers, the material shows strong anisotropy, with very high modulus in the fiber direction. For this reason, dispersion of guided waves is strongly influenced by the deviation of the direction of propagation from the symmetry axis. Results are given for propagation in different directions and for scattering of antiplane shear waves by surface-breaking cracks and delaminations.

Datta, Subhendu K.↗

Speculation on a Solar Chronometer for Climate

Solar activity has been correlated to climatic fluctuations and has been postulated as a major factor in quasi-periodic global climatic change. However, correlations are not explanations of physical mechanisms and do not couple cause with effect. A mechanism for a chronometer for solar output variability is proposed based on relations between properties of thermonuclear fusion, nuclear magnetic moment, and nuclear magnetic resonance. A fundamental oscillation of a nucleus with a net nuclear magnetic moment (NMM) is the precession of its axis of rotation when subjected to a magnetic field. Nuclear magnetic resonance (NMR) is the preferred frequency of precession for a nucleus of a particular isotope when placed in a magnetic field of specific intensity. The NMM for those isotopes involved in the proton-proton (p-p) chain pathway for solar fusion varies from strong positive to strong negative. Individual fusion events, for hydrogen and helium isotopes which release varying amounts of energy, may be controlled by NMR frequencies. The pulses of energy from fusion events occurring at NMR frequencies in the solar interior may be transformed into pressure or gravity waves that emerge as gravity or acoustic waves at the surface. Dictated by spherical harmonics, certain wavelengths may be reinforced and reenter the solar interior to modulate the fusion process. Qualitative analysis of solar and climatic data support the interaction of the three basic components of the chronometer, magnetic activity, oscillation frequency, and solar energy output.

Perry, Charles A.↗

The use of holographic interferometry for measurements of temperature in a rectangular heat pipe

Holographic interferometry is a nonintrusive method and as such possesses considerable advantages such as not disturbing the velocity and temperature field by creating obstacles which would alter the flow field. These optical methods have disadvantages as well. Holography, as one of the interferometry methods, retains the accuracy of older methods, and at the same time eliminates the system error of participating components. The holographic interferometry consists of comparing the objective beam with the reference beam and observing the difference in lengths of optical paths, which can be observed during the propagation of the light through a medium with locally varying refractive index. Thus, change in refractive index can be observed as a family of nonintersecting surfaces in space (wave fronts). The object of the investigation was a rectangular heat pipe. The goal was to measure temperatures in the heat pipe, which yields data for computer code or model assessment. The results were obtained by calculating the temperatures by means of finite fringes.

Marn, Jure↗

A review of the regional geophysics of the Arizona Transition Zone

A review of existing geophysical information and new data presented in this special section indicate that major changes in crustal properties between the Basin and Range and Colorado Plateau occur in, or directly adjacent to, the region defined as the Arizona Transition Zone. Although this region was designated on a physiographic basis, studies indicate that it is also the geophysical transition between adjoining provinces. The Transition Zone displays anomalous crustal and upper mantle seismic properties, shallow Curie isotherms, high heat flow, and steep down-to-the-plateau Bouguer gravity gradients. Seismic and gravity studies suggest that the change in crustal thickness, from thin crust in the Basin and Range to thick crust in the Colorado Plateau, may occur as a series of steps rather than a planar surface. Anomalous P wave velocities, high heat flow, shallow Curie isotherms, and results of gravity modeling suggest that the upper mantle is heterogeneous in this region. A relatively shallow asthenosphere beneath the Basin and Range and Transition Zone contrasted with a thick lithosphere beneath the Colorado Plateau would be one explanation that would satisfy these geophysical observations.

Hendricks, J. D.↗

Neutron starquake model for gamma-ray bursts

A neutron starquake model for gamma ray bursts is presented and critically analyzed. It is suggested that a slowly accreting neutron star may develop density inversions deep in its crust. These unstable layers, may be subject to elastic Rayleigh-Taylor instability which can liberate sufficient gravitational and perhaps also nuclear energy to account for individual bursts. Energy can be transported to the surface by shear waves and slowly transmitted into the magnetosphere as relativistic Alfven waves. Particle acceleration and gamma ray emission from the outer magnetosphere should ensue. Some observational implications are mentioned.

Blandford, R. D.↗

Hard X-ray and gamma-rays from supernovae

The hard electromagnetic radiation produced by and accompanying the explosion of supernovae is discussed. This radiation may have three origins: (i) the eruption of the shock wave from the surface of the star; (ii) radioactive decay of unstable isotopes produced during the explosion; and (iii) gamma-rays produced by neutrino annihilation following accretion-induced collapse. Though the latter has been proposed as a mechanism for making cosmological gamma-ray bursts, it is shown that this is unlikely.

Woosley, S. E.↗

Investigation of Separated Flows in Supersonic and Subsonic Streams with Emphasis on the Effect of Transition

Report presents the results of experimental and theoretical research conducted on flow separation associated with steps, bases, compression corners, curved surfaces, shock-wave boundary-layer reflections, and configurations producing leading-edge separation. Results were obtained from pressure-distribution measurements, shadowgraph observations, high-speed motion pictures, and oil-film studies. The maximum scope of measurement encompassed Mach numbers between 0.4 and 3.6, and length Reynolds numbers between 4,000 and 5,000,000.

Chapman, Dean R↗

Drop dynamics in space and interference with acoustic field (M-15)

The objective of the experiment is to study contactless positioning of liquid drops, excitation of capillary waves on the surface of acoustically levitated liquid drops, and deformation of liquid drops by means of acoustic radiation pressure. Contactless positioning technologies are very important in space materials processing because the melt is processed without contacting the wall of a crucible which can easily contaminate the melt specifically for high melting temperatures and chemically reactive materials. Among the contactless positioning technologies, an acoustic technology is especially important for materials unsusceptible to electromagnetic fields such as glasses and ceramics. The shape of a levitated liquid drop in the weightless condition is determined by its surface tension and the internal and external pressure distribution. If the surface temperature is constant and there exist neither internal nor external pressure perturbations, the levitated liquid drop forms a shape of perfect sphere. If temperature gradients on the surface and internal or external pressure perturbations exist, the liquid drop forms various modes of shapes with proper vibrations. A rotating liquid drop was specifically studied not only as a classical problem of theoretical mechanics to describe the shapes of the planets of the solar system, as well as their arrangement, but it is also more a contemporary problem of modern non-linear mechanics. In the experiment, we are expecting to observe various shapes of a liquid drop such as cocoon, tri-lobed, tetropod, multi-lobed, and doughnut.

Yamanaka, Tatsuo↗

Impulsive ion injections in the morning auroral region

Low altitude (less than 1000 km) measurements of ions precipitating into the morning auroral region are presented and analyzed. The ion fluxes exhibited time-energy signatures consistent with impulsive injection onto high-altitude field lines, followed by time-of-flight dispersion. The origin of these ions is investigated through the detailed examination of these signatures in conjunction with simultaneous measurements of precipitating electrons and a magnetic field model. A model is developed which indicates that the source for these particles was located in or near the magnetopause boundary layer, with the position deduced to be in the midlatitude flank region about 20-30 R(sub E) tailward of the Earth. The model explains the existence of multiple injections on a given field line as due to a quasi-periodic source, with the periodicity being about 100-200 s at the source. Several mechanisms are examined in an attempt to explain the injections, with a mechanism related to the propagation of waves on the surface of the boundary layer found to be the most plausible. The observations and results are compared to those of similar experiments and some unifying ideas are discussed.

Clemmons, J. H.↗

The 1994 International Geoscience and Remote Sensing Symposium (IGARSS 1994)

The papers presented at the symposium focus on remote sensing, particularly on global monitoring of the earth with emphasis on the solution of environmental problems. Topics discussed include remote sensing of clouds and earth troposphere, sea ice remote sensing, optical remote sensing, land monitoring and thermal sensing, atmospheric sounding and monitoring, atmospheric correction, and satellite imaging data. Other subject areas are ecosystems and vegetation monitoring; ocean winds and surface scattering; ocean waves, currents and bathymetry; satellite oceanography; SAR for remote sensing; neural nets application to remote sensing; geographical information systems; and electromagnetic wave propagation. Also discussed environmental monitoring using ERS-1; Topex/Poseidon results; spaceborne instruments; image processing and classification algorithms; and future space missions.

Source record↗

Advances in Time-Distance Helioseismology

Time-distance helioseismology is a way to measure travel times between surface locations for waves traversing the solar interior. Coupling the travel with an extensive modeling effort has proven to be a powerful tool for measuring flows and other wave speed inhomogeneities in the solar interior. Problems receiving current attention include studying the time variation of the meridional circulation and torsional oscillation and active region emergence and evolution, current results on these topics will be presented.

Duvall, Thomas L., Jr.↗

Observations of the north polar region of Mars from the Mars orbiter laser altimeter

Elevations from the Mars Orbiter Laser Altimeter (MOLA) have been used to construct a precise topographic map of the martian north polar region. The northern ice cap has a maximum elevation of 3 kilometers above its surroundings but lies within a 5-kilometer-deep hemispheric depression that is contiguous with the area into which most outflow channels emptied. Polar cap topography displays evidence of modification by ablation, flow, and wind and is consistent with a primarily H2O composition. Correlation of topography with images suggests that the cap was more spatially extensive in the past. The cap volume of 1.2 x 10(6) to 1.7 x 10(6) cubic kilometers is about half that of the Greenland ice cap. Clouds observed over the polar cap are likely composed of CO2 that condensed out of the atmosphere during northern hemisphere winter. Many clouds exhibit dynamical structure likely caused by the interaction of propagating wave fronts with surface topography.

Flight Experiment↗

Computation of Gust-Cascade Interaction Using the CE/SE Method

The problem 2 in Category 3 of the 4th Computational Aeroacoustic(CAA) Workshop is solved using the space-time conservation element and solution element (CE/SE) method. This problem models rotor-stator interaction in a 2D cascade. It involves complex geometries and flow physics including vortex shedding and acoustic radiation. The parallel version of the 2D nonlinear Euler solver is used with an unstructured triangular mesh to solve this problem. The Giles approach is incorporated with the CE/SE method to handle non-equal pitches of the rotor and stator. Validation on the Giles approach is performed using Problem 3.1 in the 2nd CAA Workshop. The space-time CE/SE method is a finite volume method with second-order accuracy in both space and time. The flux conservation is enforced in both space and time instead of space only. It has low numerical dissipation and dispersion errors. It uses simple non-reflecting boundary conditions and is compatible with unstructured meshes. It is simple, flexible, and generate reasonably accurate solutions. The CE/SE method has been successfully applied to solve numerous practical problems, especially aeroacoustic problems. Some preliminary numerical results of the benchmark problem 3.2 of the 4th CAA Workshop are shown. The steady-state pressure contour is plotted. The mean pressure distribution on the blade surface is compared with Turbo solution showing a good agreement. The sound pressure level versus the rotor harmonic n at the six designated positions on the blade surface, three locations at inlet plane, and three locations at the outlet plane are plotted. It can be seen that the acoustic response exists only at the excitation frequencies (n = 1,2,3). On the blade surface, the acoustic wave at n = 1 is dominant, while at the inlet and outlet planes, the sound pressure level at n = 2 becomes the largest, which is similar to the results presented. The distribution of sound pressure level at different spatial modes along the z- direction is plotted for n = 1,2,3, respectively. It shows that the spatial modes m = -32 and 22 at n = 1 exponentially decay, and the spatial modes m = 10 at n = 2, m = -42 and 12 at n = 3 propagate both upstream and downstream, which agrees with the prediction based on the linearized theory. Some oscillations are observed, which needs to be investigated further. In the final paper, the numerical results will be compared with a frequency-domain solver LINFLUX solution if it is available.

Wang, X.-Y.↗

Multimode-Guided-Wave Ultrasonic Scanning of Materials

Two documents discuss a method of characterizing advanced composite materials by use of multimode-guided ultrasonic waves. A transmitting transducer excites modulated (e.g., pulsed) ultrasonic waves at one location on a surface of a plate specimen. The waves interact with microstructure and flaws as they propagate through the specimen to a receiving transducer at a different location. The received signal is analyzed to determine the total (multimode) ultrasonic response of the specimen and utilize this response to evaluate microstructure and flaws. The analysis is performed by software that extracts parameters of signals in the time and frequency domains. Scanning is effected by using computer-controlled motorized translation stages to position the transducers at specified pairs of locations and repeating the measurement, data-acquisition, and data-analysis processes at the successive locations. One document presents results of a scan of a specimen containing a delamination.

Roth, Don↗