Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “small satellites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Olympus propagation and communication experiments in the US

The participation of the United States in Olympus experiments is outlined. These include, basic propagation measurement, the Cooperative Data Exchange Experiment (CODE), a rain scatter interference measurement, a small scale diversity experiment, the Personal Access Satellite System (PASS), and all systems that use adaptive fade compensation techniques similar to the Advanced Communications Technology Satellite (ACTS) of NASA.

Davarian, F.↗
NASA NTRS1988

The long-period semi-detached giant binary system 5 Ceti

The binary system 5 Ceti consists of a K3 III star at or near its Roche lobe and a small hot companion best studied in the satellite ultraviolet. The hot radiation source at the secondary star is immersed in the chromosphere of the K giant, and the slight enhancements of a few UV absorption lines at secondary minimum are used to estimate chromospheric column densities. The variability and flatness of the spectrum is evidence for considering the object a main-sequence star accreting mass by way of Roche-lobe overflow at the rate of 5 X 10 to the minus 7 solar masses/yr. Thus 5 Ceti may represent the elusive rapid stage of mass transfer in which matter is lost from the shrinking Roche lobe of the more massive star. The Fe II UV spectrum in interacting binaries is also discussed.

Eaton, Joel A.↗
NASA NTRS1989

Kalman estimation for SEDS measurements

The first on-orbit experiment of the Small Expendable Deployer System (SEDS) for tethered satellites will collect telemetry data for tethered length, rate of deployment, and tether tension. The post-flight analysis will use this data to reconstruct the deployment history and determine payload position and tether shape. Two Kalman estimator algorithms were written, and output using simulated measurement data was compared. Both estimators exhibited the same estimated state histories, indicating that numerical instability in the traditional algorithm was not the cause of filter divergence. Estimation of acceleration biases was added, which reduced the error but did not correct the divergence. An add-a-bead estimator that adds lumped masses as the tether is deployed was written, which provides a state model that matches the BEADSIM simulation providing the true measurements and states. This twenty-one bead estimator produced state histories similar to those of the two-bead estimator, indicating that the filter divergence was not caused by a reduced-order model. The noise models used to date are relatively simple and may be the source of estimator divergence. The investigation of colored noise models, cross-correlated measurement and process covariances, and noise-adaptive filter techniques is recommended.

Carrington, Connie K.↗
NASA NTRS1989

The 16 September 1986 eruption of Lascar volcano, north Chile - Satellite investigations

The features of the September 16, 1986 small-volume high-intensity eruption of Lascar volcano (Chile) were investigated using remote sensing data. Ground observations and conventional geological studies provided only minor information on this event. Examinations of Landsat Thematic Mapper (TM) images showed that the pronounced thermal anomaly recorded on TM images in 1984 and 1985 became weaker after the eruption on September 16, 1986, and divided into several sources. Field investigations and images obtained by GOES confirm that the September 16 event was a short-lived volcanic eruption which produced an ash column reaching 15 km altitude. Transport occurred in the upper troposphere at speeds up to 180 km/h. Ash fall from the plume was well sorted and moderately fine-grained (MD 200 microns).

Glaze, L. S.↗
NASA NTRS1990

The size and shape of (2) Pallas from the 1983 occultation of 1 Vulpeculae

The analysis and results of an occultation of the spectroscopic binary star 1 Vulpeculae by the asteroid (2) Pallas, observed from 130 locations, are presented. Combination of solutions from this and previous occultations shows the triaxial shape of Pallas to be elongated, but not severely, with the ratio of the largest to the smallest axes being less than 1.15. The data provide a separation and a position angle of the secondary component of 1 Vulpeculae and indicate that the star's actual parallax is probably near 0.008 arcsec, half of the published value. The analysis gives a calibration of the accuracy and the reaction time corrections for visual observations of asteroidal occultations. The absence of any confirmed secondary extinctions shows that any satellites of Pallas must be rare or small. The photometric observations seem to rule out a substantial cloud of dust surrounding Pallas postulated previously.

Dunham, David W.↗
NASA NTRS1991

The application of high spectral and spatial resolution imaging spectrometers for locating downed aircraft

The utility of high-resolution imaging spectrometer data is examined as an aid in locating downed aircraft by using a unique spectral signature while not requiring the extremely high spatial resolution needed to identify an aircraft by shape. Ground spectral measurements of several airplane wings, overflight spectral measurements of aircraft scenes, and the rationale for the chosen spectral signature are presented. It is concluded that imaging spectrometers which can detect and spatially locate a narrow-band spectral signature filling only a few pixels appear to have a utility for search and rescue aircraft or satellite systems as a aid in locating small downed aircraft. This spectral feature would have to be added to the surface coatings applied to aircraft. Proposed for use as such a spectral signature is a significant negative reflectance slope, in the 520 to 580 nm interval.

Gatlin, James A.↗
NASA NTRS1993

Two way time transfer results at NRL and USNO

The Naval Research Laboratory (NRL) has developed a two way time transfer modem system for the United States Naval Observatory (USNO). Two modems in conjunction with a pair of Very Small Aperture Terminal (VSAT) and a communication satellite can achieve sub nanosecond time transfer. This performance is demonstrated by the results of testing at and between NRL and USNO. The modems use Code Division Multiple Access (CDMA) methods to separate their signals through a single path in the satellite. Each modem transmitted a different Pseudo Random Noise (PRN) code and received the others PRN code. High precision time transfer is possible with two way methods because of reciprocity of many of the terms of the path and hardware delay between the two modems. The hardware description was given in a previous paper.

Galysh, Ivan J.↗
NASA NTRS1994

Nonlinear Resonances in the Solar System

Orbital resonances are ubiquitous in the Solar system. They play a decisive role in the long term dynamics, and in some cases the physical evolution, of the planets and of their natural satellites, as well as the evolution of small bodies (including dust) in the planetary system. The few-body gravitational problem of hierarchical planetary-type systems allows for a complex range of dynamical timescales, from the fast orbital periods to the very slow orbit precession rates. The interaction of fast and slow degrees of freedom produces a rich diversity of resonance phenomena. Weak dissipative effects - such as tides or radiation drag forces - also produce unexpectedly rich dynamical behaviors. This paper provides a mostly qualitative discussion of simple dynamical models for the commonly encountered orbital resonance phenomena in the Solar system.

Malhotra, Renu↗
NASA NTRS1998

An Adaptable Power System with Software Control Algorithm

A low cost, flexible and modular spacecraft power system design was developed in response to a call for an architecture that could accommodate multiple missions in the small to medium load range. Three upcoming satellites will use this design, with one launch date in 1999 and two in the year 2000. The design consists of modular hardware that can be scaled up or down, without additional cost, to suit missions in the 200 to 600 Watt orbital average load range. The design will be applied to satellite orbits that are circular, polar elliptical and a libration point orbit. Mission unique adaptations are accomplished in software and firmware. In designing this advanced, adaptable power system, the major goals were reduction in weight volume and cost. This power system design represents reductions in weight of 78 percent, volume of 86 percent and cost of 65 percent from previous comparable systems. The efforts to miniaturize the electronics without sacrificing performance has created streamlined power electronics with control functions residing in the system microprocessor. The power system design can handle any battery size up to 50 Amp-hour and any battery technology. The three current implementations will use both nickel cadmium and nickel hydrogen batteries ranging in size from 21 to 50 Amp-hours. Multiple batteries can be used by adding another battery module. Any solar cell technology can be used and various array layouts can be incorporated with no change in Power System Electronics (PSE) hardware. Other features of the design are the standardized interfaces between cards and subsystems and immunity to radiation effects up to 30 krad Total Ionizing Dose (TID) and 35 Mev/cm(exp 2)-kg for Single Event Effects (SEE). The control algorithm for the power system resides in a radiation-hardened microprocessor. A table driven software design allows for flexibility in mission specific requirements. By storing critical power system constants in memory, modifying the system code for other programs is simple. These constants can be altered also by ground command, or in response to an anomolous event. All critical power system functions have backup hardware functions to prevent a software or computer glitch from propagating. A number of battery charge control schemes can be implemented by selecting the proper control terms in the code. The architecture allows the design engineer to tune the system response to various system components and anticipated load profiles without costly alterations. A design trade was made with the size, weight and power dissipation of the electronics versus the performance of the power bus to load variations. Linear, fine control is maintained with a streamlined electronics design. This paper describes the hardware design as well as the software control algorithm. The challenges of closing the system control loop digitally is discussed. Control loop margin and power system performance is presented. Lab measurements are shown and compared to the system response of a hardware model running actual flight software.

Castell, Karen↗
NASA NTRS1997

Near Wake Depletion of Non-Magnetized Bodies Immersed in Mesosonic Plasma Flow

During the recent TSS-1R mission, measurements of ion depletion in the near wake were obtained at a downstream distance of two body radii from the satellite center. The ratio of satellite radius to Debye length is approximately 150. Similar measurements were also obtained at the same downstream location in the wake of the shuttle during the Spacelab 2 mission of August 1985. In the case of the shuttle, the ratio of body radius to Debye length is greater than 1000. The wake depletion observed in the these two cases, together with data obtained from previous ionospheric satellites and from applicable laboratory experiments involving small bodies, will be compared in order to determine the influence of body size on wake filling. Extrapolation of these results to the case of the moon in the solar wind will be noted.

Wright, K. H.↗
NASA NTRS1999

Bring'em Back Alive or at Least Carefully

Within the next decade, the world's space agencies plan to launch a variety of robotic spacecraft that will return samples from the surface of Mars, the tail of a comet, the nucleus of a comet, the surface of an asteroid, and the solar wind. Most of these places are not considered likely spots for life, but any mission returning from a location with the potential for harboring life will require special containment and handling because of the possible inclusion of living entities within returned samples. In its 1997 report on sample return from Mars, the Space Studies Board of the National Research Council (NRC) noted that the only risk of significant adverse effects would be from returning a replicating organism. Furthermore, the report noted: 'While the probability of returning a replicating biological entity in a sample from Mars' is judged to be low and the risk of pathogenic or ecological effects is lower still, the risk is not zero. Therefore, it is reasonable that NASA adopt a prudent approach, erring on the side of caution and safety when dealing with returned samples. More recently, a 1998 NRC report on small solar system bodies (asteroids, comets, planetary satellites, and interplanetary dust) recommended a similarly cautious approach for samples returned from anywhere else within the solar system that could have environmental conditions conducive for harboring life. We have not detected life elsewhere in the solar system, at least not yet. Nonetheless, the rationale behind the conservative approach to sample handling is similar to the environmental, health, and safety measures taken on Earth when transporting or handling infectious agents or importing non-native organisms to a new area. Better safe than sorry.

Race, Margaret S.↗
NASA NTRS1979

Briefcase Communicator

In the photo at bottom right, a U.S. Park Police officer is demonstrating a battery-powered communications system, sufficiently compact to be packed in a briefcase-size container, which can send and receive signals over great distances by means of satellite relay. Key to the system's efficacy is the high-powered transmitting and receiving equipment aboard such NASA satellites as the Applications Technology Satellite6 (ATS-6) and the joint U.S.-Canadian Communications Technology Satellite (CTS); this enables the briefcase communicator to pick up satellite-relayed signals by means of the small hook-on antenna shown instead of the more elaborate-ground equipment customarily needed. Developed by NASA's Goddard Space Flight Center, the communicator is intended for use in emergency situations. It has utility, for example, in disasters, such as floods and hurricanes, where power failure disrupts conventional communications; for on-the-spot transmissions from major accident sites; or in remote areas where no other means of communication exists

Source record↗
NASA NTRS2015

The Orbital Design of Alpha Centauri Exoplanet Satellite (ACESat)

Exoplanet candidates discovered by Kepler are too distant for biomarkers to be detected with foreseeable technology. Alpha Centauri has high separation from other stars and is of close proximity to Earth, which makes the binary star system 'low hanging fruit' for scientists. Alpha Centauri Exoplanet Satellite (ACESat) is a mission proposed to Small Explorer Program (SMEX) that will use a coronagraph to search for an orbiting planet around one of the stars of Alpha Centauri. The trajectory design for this mission is presented here where three different trajectories are considered: Low Earth Orbit (LEO), Geosynchronous Orbit (GEO) and a Heliocentric Orbit. Uninterrupted stare time to Alpha Centauri is desirable for meeting science requirements, or an orbit that provides 90% stare time to the science target. The instrument thermal stability also has stringent requirements for proper function, influencing trajectory design.

Alpha Centauri↗
NASA NTRS2016

Tropospheric Emissions: Monitoring of Pollution (TEMPO)

TEMPO (Tropospheric Emissions: Monitoring of Pollution) was selected in 2012 by NASA as the first Earth Venture Instrument, for launch between 2018 and 2021. It will measure atmospheric pollution for greater North America from space using ultraviolet and visible spectroscopy. TEMPO observes from Mexico City, Cuba, and the Bahamas to the Canadian oil sands, and from the Atlantic to the Pacific, hourly and at high spatial resolution (approximately 2.1 kilometers N/S by 4.4 kilometers E/W at 36.5 degrees N, 100 degrees W). TEMPO provides a tropospheric measurement suite that includes the key elements of tropospheric air pollution chemistry, as well as contributing to carbon cycle knowledge. Measurements are made hourly from geostationary (GEO) orbit, to capture the high variability present in the diurnal cycle of emissions and chemistry that are unobservable from current low-Earth orbit (LEO) satellites that measure once per day. The small product spatial footprint resolves pollution sources at sub-urban scale. Together, this temporal and spatial resolution improves emission inventories, monitors population exposure, and enables effective emission-control strategies. TEMPO takes advantage of a commercial GEO host spacecraft to provide a modest cost mission that measures the spectra required to retrieve ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2), formaldehyde (H2CO), glyoxal (C2H2O2), bromine monoxide (BrO), IO (iodine monoxide),water vapor, aerosols, cloud parameters, ultraviolet radiation, and foliage properties. TEMPO thus measures the major elements, directly or by proxy, in the tropospheric O3 chemistry cycle. Multi-spectral observations provide sensitivity to O3 in the lowermost troposphere, substantially reducing uncertainty in air quality predictions. TEMPO quantifies and tracks the evolution of aerosol loading. It provides these near-real-time air quality products that will be made publicly available. TEMPO will launch at a prime time to be the North American component of the global geostationary constellation of pollution monitoring together with the European Sentinel-4 (S4) and Korean Geostationary Environment Monitoring Spectrometer (GEMS) instruments.

tropospheric measurement suite↗
NASA NTRS2019

Atmospheric Correction for Coastal Waters Based on Multi-Angle Polarimetric Observations

Atmospheric correction is an essential procedure of ocean color remote sensing, which obtains water-leaving signals from satellite or airborne sensors. Due to the small percentage of the water leaving signals in the total measurement, atmospheric correction requires precise evaluation of the radiometric contributions from the aerosol and ocean surface. It is often challenging over coastal waters when absorbing aerosols are present and when water leaving signals in the near infrared spectral region are non-negligible. In this work, we report on a joint retrieval algorithm that determines aerosol and ocean optical properties using the polarimetric measurements based on a coupled atmosphere and ocean radiative transfer model. Two bio-optical models are designed for ocean water properties. One model parameterizes the open ocean optical properties in terms of the concentration of chlorophyll a. The other is a generalized bio-optical model for coastal waters that describes the absorption and scattering by phytoplankton, colored dissolved organic matter and non-algal particles using multiple parameters. We applied the algorithm to the airborne Research Scanning Polarimeter (RSP) measurements acquired over both open and coastal ocean waters. Through the comparisons with in situ ocean color measurements, the flexibility and accuracy of the retrieval algorithm in retrieving aerosol and water leaving radiance properties are demonstrated under various aerosol and ocean water conditions.

Gao, Meng↗
NASA NTRS2018

A Revised Exoplanet Yield from the Transiting Exoplanet Survey Satellite (TESS)

The Transiting Exoplanet Survey Satellite (TESS) has a goal of detecting small planets orbiting stars bright enough for mass determination via ground-based radial velocity observations. Here, we present estimates of how many exoplanets the TESS mission will detect, the physical properties of the detected planets, and the properties of the stars that those planets orbit. This work uses stars drawn from the TESS Input Catalog Candidate Target List and revises yields from prior studies that were based on Galactic models. We modeled the TESS observing strategy to select approximately 200,000 stars at 2-minute cadence, while the remaining stars are observed at 30-minute cadence in full-frame image data. We placed zero or more planets in orbit around each star, with physical properties following measured exoplanet occurrence rates, and used the TESS noise model to predict the derived properties of the detected exoplanets. In the TESS 2-minute cadence mode we estimate that TESS will find 1250 ± 70 exoplanets (90% confidence), including 250 smaller than 2 R(sub ⊕). Furthermore, we predict that an additional 3100 planets will be found in full-frame image data orbiting bright dwarf stars and more than 10,000 around fainter stars. We predict that TESS will find 500 planets orbiting M dwarfs, but the majority of planets will orbit stars larger than the Sun. Our simulated sample of planets contains hundreds of small planets amenable to radial velocity follow-up, potentially more than tripling the number of planets smaller than 4 R(sub ⊕) with mass measurements. This sample of simulated planets is available for use in planning follow-up observations and analyses.

Barclay, Thomas↗
NASA NTRS2021

Mass and density of the transiting hot and rocky super-EarthLHS 1478 b (TOI-1640 b)

One of the main objectives of the Transiting Exoplanet Survey Satellite (TESS) mission is the discovery of small rocky planets around relatively bright nearby stars. Here, we report the discovery and characterization of the transiting super-Earth planet orbiting LHS 1478 (TOI-1640). The star is an inactive red dwarf (J∼9.6mag and spectral type m3 V) with mass and radius estimates of 0.20±0.01 M and 0.25±0.01R, respectively, and an effective temperature of 3381±54K. It was observed by TESS in four sectors. These data revealed a transit-like feature with a period of 1.949 days. We combined the TESS data with three ground-based transit measurements, 57 radial velocity (RV) measurements from CARMENES, and 13 RV measurements from IRD, determining that the signal is produced by a planet with a mass of 2.33+0.20−0.20M and a radius of 1.24+0.05−0.05R. The resulting bulk density of this planet is 6.67 g cm−3, which is consistent with a rocky planet with an Fe- and MgSiO3-dominated composition. Although the planet would be too hot to sustain liquid water on its surface (its equilibrium temperature is about ∼595 K, suggesting a Venus-like atmosphere), spectroscopic metrics based on the capabilities of the forthcomingJames WebbSpace Telescope and the fact that the host star is rather inactive indicate that this is one of the most favorable known rocky exoplanets for atmospheric characterization.

M. G. Soto↗
NASA NTRSDate not supplied

Low Leakage Valves for Long Duration Missions

I.Nomenclaturemtypical_mission=internal mass of propellant lost over the course of a mission with Qtypicalmmission_goal=mass of propellant loss over the course of a mission with Qgoaltmission=theoretical mission durationQtypical=internal leakage rate found in commercially available valvesQgoal=internal leakage rate design goalρH2_STP=density of hydrogen at standard temperature and pressure.1NASA AST, Liquid Propulsion Valve Engineer.Valves, Actuators, and Ducts Design and Development Branch (ER14)2NASA AST, Liquid Propulsion Valve Engineer.Valves, Actuators, and Ducts Design and Development Branch (ER14)3NASA AST, Liquid Propulsion Valve Engineer (Retired).Valves, Actuators, and Ducts Design and Development Branch (ER14)4JSEG ESSCA, Engineering Specialist.Valves Actuators and Ducts Design and Development Branch (ER14)5NASA AST, Liquid Propulsion Valve Engineer.Valves, Actuators, and Ducts Design and Development Branch (ER14)6JSEG ESSCA, Valve Design and Development Engineer.Valves Actuators and Ducts Design and Development Branch (ER14) II.IntroductionCurrent aerospace cryogenic valves present challenges to potential long duration missions that utilize cryogenic propellants. Small interplanetary and long-life communication satellites typically utilize hypergolic propellants that operate at higher temperatures, making it easier to achieve very low internal leakage rates. Larger vehicles for long duration missions will likely need to utilize cryogenic-based chemical and nuclear systems to achieve mission requirements. Some early propulsion concepts are projected to require valves with a nominal size ranging from 3” to 10”.Currently available cryogenic aerospace valves typically have internal leakage rates which can range from 100 to 300 SCIM for 3” valves, or upwards of 2,000 SCIM for 10” valves. With just a few of these valves in a system, internal leakage could account for multiple tons of propellant loss over the course of a potential Mars mission, as shown in Figure 1.Figure 1 - Potential Propellant Loss Over the Course of a Long Duration MissionMost internal leakage rates can be attributed to inherent imperfections and misalignments, which result in imperfect contact between sealing surfaces, as shown in Figure 2.Figure 2 - Imperfections and Misalignments Between Sealing Surfaces The ER14 Branch at Marshall Space Flight Center (MSFC) has created a self-aligning seat and poppet design (shown in Figure 3) that allows a valve to be more tolerant of imperfect contacts. This design utilizes a metallic poppet head with five degrees of freedom that allows the poppet toself-align with the seat, reducing the need for tight tolerances.Figure 3 - Self-Aligning Seat and Poppet DesignIII.Test Valve DescriptionA series of development tasks have been conducted to study potential improvements to internal leakage rates. These tasks include 3 test valves (shown in Figure 4) to demonstrate the potential application to various configurations and sizes:A 3” isolation valve for liquid flows (similar to a fill and drain valve)A 3” relief valve for low temperature gas flows.An 8” pre-valve (similar to the engine isolation valve needed on a Nuclear Thermal Propulsion (NTP) engine).Figure 4 - Low Leakage Development Test ValvesThese valves have been developed and are currently being tested at liquid nitrogen (LN2) temperatures, and are anticipated to undergo testing at liquid hydrogen (LH2) temperatures in late 2022

Cody L Gilliland↗