Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shear flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Self-consistent core-pedestal ITER scenario modeling

The purpose of these integrated ITER simulations is to identify dependencies that can impact the performance of ITER. The dependence of fusion power production, temperature and density pedestals, and core profiles on varying magnetic-q, edge density fueling strength, neoclassical transport, magnetic field strength, and alpha heating, are examined. It is noted that ion modes usually dominate the interior, while electron modes dominate the barrier. The electron mode without flow shear is substantially stronger. The q increase tends to cause more kinetic ballooning modes at the edge and the q decrease means that the peeling is getting worse, but the ballooning is getting better. The large edge q tends to provide hollow density while small edge q gives normal density profile. This is consistent with the observation that the density of particles is inversely proportional to the density of the plasma current. The rise in the source of the edge particle increases the density of the edge and the reaction rate close to the edge increases temperature fluxes, resulting in weak pedestal barriers. When neoclassical transport is turned off or the strength of B-field is increased, the pronounced edge barriers are identified. In addition, a distinct effect on the magnetohydrodynamic (MHD) modes is observed due to the increased B-field. The interesting aspect is that the barrier collapses about q = 2 as the stability of MHD has decreased to replace the barrier with a continuous slope but with roughly the same fusion power. This would actually be good for a reactor. The slope of the H-mode pedestal is found to be reduced due to the alpha heating. It is expected that the problem of edge-localized modes causing damage to the first wall will be eased. The effects of circular, elongated, and general geometry on plasma profiles are also compared and contrasted. The circular geometry has a hollow density profile and no edge or internal thermal transport barrier (ETB or ITB). However, both ETBs and ITBs can be found in the elongated geometry. In general geometry, there is a weaker ETB, comparable ITBs, but a higher edge particle transport barrier than in elongated geometry. Higher density near the edge, on the other hand, causes more wall erosion, so elongated geometry might be the best option.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of the TAEs’ saturation phase in the Large Helical Device: MHD burst

Here, the aim of the present study is to analyze the saturation regime of the toroidal Alfven eigenmodes (TAE) in the Large Helical Device plasma, particularly the MHD burst. The linear and nonlinear evolution of the TAEs are simulated by the FAR3d code that uses a reduced MHD model for the thermal plasma coupled with a gyrofluid model for the energetic particle (EP) species. The linear simulations indicate the overlapping of 1/2–1/1, 2/3–2/4 and 3/5–3/6 TAEs in the inner-middle plasma region and frequency range of 45–75 kHz, triggered by EPs with an energy of T f = 45 keV and EP β = 0.022. The nonlinear simulations show that 2/3–2/4 and 3/4–3/5 TAEs are further destabilized due to the energy transfer from the 1/1–1/2 TAE, leading to broad TAE radial overlapping and triggering of the MHD burst. The energy of the 1/1–1/2 TAE is also nonlinearly transferred to the thermal plasma destabilizing the 0/0 and 0/1 modes, inducing the generation of shear flows and zonal currents, as well as large deformations in the thermal pressure and EP density radial profiles. The nonlinear simulation reproduces the same succession of instabilities and the same frequency range with respect to the experiment. The instability propagates outward during the bursting phase, showing a large decrease of the EP density profile between the middle-outer plasma, indicating the loss of part of the EP population that explains the decrease in the plasma heating efficiency observed during the MHD burst.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rational surfaces, flows and radial structure in the TJ-II stellarator

Abstract In this work, we report on the results obtained by measuring several turbulent quantities well inside the plasma edge by means of a Langmuir probe during dynamical rotational transform scans in the TJ-II stellarator, while applying a radial electric field to the edge plasma using a biasing probe. By calculating the intermittence parameter from floating potential measurements, we are able to identify a major low order rational surface and hence relate the probe measurements to the local value of the rotational transform. Based on the former, we are able to show that the poloidal plasma velocity (and hence radial electric field) has a significant radial structure that is clearly related to the rotational transform profile and in particular the lowest order rational surfaces in the range studied. The poloidal velocity is also affected by the edge biasing. The particle flux Γ was also found to exhibit a radial pattern, as did the flow shear suppression term ω E × B , but the relation of the former to the low-order rational surfaces was less clear. We surmise that this lack of direct correspondence is due to an unknown term in the turbulence evolution equation: the instability growth rate, γ . We make use of a reduced Magnetohydrodynamic turbulence model to interpret the results. Overall, a picture is obtained in which the plasma self-organizes towards a state with a clear radial pattern of the radial electric field, in line with expectations from some numerical studies describing the spontaneous formation of an ‘ E × B staircase’, consisting of alternating layers with fast and slow radial transport. In this state, the radial profiles of various quantities (density, temperature, pressure) will not be smooth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inter-ELM pedestal turbulence dynamics dependence on q 95 and temperature gradient

A series of dedicated experiments from DIII-D tokamak provide spatially and temporally resolved measurements of electron density and temperature, and multiscale and multichannel fluctuations over a wide range of conditions. Measurements of long wavelength density fluctuations in the type-I ELMing H-mode pedestal routinely revealed a coexistence of multiple instabilities that exhibit dramatic different dynamic behaviors as q 95 and temperature gradient are varied, apparently responsible for limiting pedestal temperature profiles. Two distinct frequency bands of density fluctuations are modulated with ELM cycle with frequency above 200kHz propagating in the electron diamagnetic direction in the lab frame (electron mode) and below 200kHz propagating in the ion diamagnetic direction (ion mode). The electron mode amplitude peaks near the electron temperature gradient region and increases with q 95 which seems to be correlated with the increased χ e at higher q 95 , similar to the characteristics expected for Micro-tearing Mode (MTM). At higher q 95 , during the inter-ELM period, the ion mode decays at later phase of the ELM cycle. Consistently, the poloidal correlation length of the ion mode is also found to reduce which suggests the possible E×B flow shear suppression of ion mode at later phase of the ELM cycle as the Er well recovers. In contrast, the electron mode grows during the ELM cycle and reaches saturation at around 50-60% of ELM period. Linear gyrokinetic simulations find the MTMs as the most unstable mode in the pedestal electron temperature gradient region. The higher q 95 and lower magnetic shear destabilize MTMs. These observations provide key insights of the underlying physics of multifield properties and rich dataset of experimental 'fingerprints' that enable new tests of the theoretical pedestal models and lead to developing a predictive model for pedestal formation on ITER and future burning plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The formation of an radial edge electric field due to finite ion orbit width effects is the possible root cause of the H-mode edge

Abstract Full orbit-following simulations of thermal ions show that finite ion-orbit width effects create charge separation near the last closed flux surface (LCFS) which generates a localized radial electric field. Experimentally, edge electric fields are observed in H-mode plasmas and they are necessary for the edge turbulence suppression via the E × B flow shear mechanism. Confined trapped (and to a lesser extent co-passing) ions near the plasma edge form a positive charge distribution outside the LCFS, while thermal electrons are tied more tightly to field lines owing to their small mass and are poorly confined outside the LCFS, hence charge neutrality is violated outside the LCFS. A large number of reported observations from spherical and conventional tokamaks support the results from the simulations although the simulations were not performed fully self consistently. The results suggest ways to lower the H-mode power threshold and optimize the H-mode plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Saturation of fishbone instability through zonal flows driven by energetic particle transport in tokamak plasmas

Gyrokinetic and kinetic-MHD simulations are performed for the fishbone instability in the DIII-D discharge #178631, chosen for validation of first-principles simulations to predict the energetic particle (EP) transport in an ITER prefusion baseline scenario. Fishbone modes are found to generate zonal flows, which dominate the fishbone saturation. The underlying mechanisms of the two-way fishbone-zonal flows nonlinear interplay are discussed in details. Numerical and analytical analyses identify the fishbone-induced EP redistribution as the dominant generation mechanism for zonal flows. The zonal flows modify the nonlinear dynamics of phase space zonal structures, which reduces the amount of EPs able to resonate with the mode, leading to an early fishbone saturation. Simulation results including zonal flows agree quantitatively with DIII-D experimental measurements of the fishbone saturation amplitude and EP transport, supporting this novel saturation mechanism by self- generated zonal flows. Moreover, the wave-particle mode-locking mechanism is shown to determine quantitatively the fishbone frequency down-chirping, as evident in GTC simulation results in agreement with predictions from analytical theory. Finally, the
fishbone-induced zonal flows are possibly responsible for the formation of an ion-ITB in the DIII-D discharge. Based on the low EP transport and the large zonal flow shearing rates associated with the fishbone instability in gyrokinetic simulations of the ITER scenario, it is conjectured that high performance scenarios could be designed in ITER burning plasmas through fishbone-induced ITBs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Towards fully predictive gyrokinetic full- f simulations: validation and triangularity studies in TCV

Designing economical magnetic confinement fusion power plants motivates computational tools that can estimate plasma behavior from engineering parameters without direct reliance on experimental measurement of the plasma profiles. In this work, we present full-f global long-wavelength gyrokinetic simulations of edge and scrape-off layer turbulence in tokamaks that use only magnetic geometry, heating power, and particle inventory as inputs. Unlike many modeling approaches that employ free parameters fitted to experimental data, raising uncertainties when extrapolating to reactor scales. This approach directly simulates turbulence and resulting profiles through gyrokinetics without such empirical adjustments. This is achieved via an adaptive sourcing algorithm in Gkeyll that strictly controls energy injection and emulates particle sourcing due to neutral recycling. We show that the simulated kinetic profiles compare reasonably well with Thomson scattering and Langmuir probe data for Tokamak á Configuration Variable (TCV) discharge #65125, and that the simulations reproduce characteristic features such as blob transport and self-organized electric fields. Applying the same framework to study triangularity effects suggests mechanisms contributing to the improved confinement reported for negative triangularity (NT). Simulations of TCV discharges #65125 and #65130 indicate that NT increases the E x B flow shear (by about 20% in these cases), which correlates with reduced turbulent losses and a modest change in the distribution of power exhaust to the vessel wall. While the physical models contain approximations that can be refined in future work, the predictive capability demonstrated here, evolving multiple profile relaxation times with kinetic electron and ion models in hundreds of GPU hours, indicates the feasibility of using Gkeyll to support design studies of fusion devices.

Hoffmann, Antoine Cyril David [Princeton Plasma Ph↗

Turbulent magnetic field amplification from spiral SASI modes in core-collapse supernovae

We describe the initial implementation of magnetohydrodynamics (MHD) in our astrophysical simulation code GENASIS. Then, we present MHD simulations exploring the capacity of the stationary accretion shock instability (SASI) to generate magnetic fields by adding a weak magnetic field to an initially spherically symmetric fluid configuration that models a stalled shock in the post-bounce supernova environment. Upon perturbation and nonlinear SASI development, shear flows associated with the spiral SASI mode contributes to a widespread and turbulent field amplification mechanism. While the SASI may contribute to neutron star magnetization, these simulations do not show qualitatively new features in the global evolution of the shock as a result of SASI-induced magnetic field amplification.

79 ASTRONOMY AND ASTROPHYSICS↗

On the shear-current effect: toward understanding why theories and simulations have mutually and separately conflicted

ABSTRACT The shear-current effect (SCE) of mean-field dynamo theory refers to the combination of a shear flow and a turbulent coefficient β21 with a favourable negative sign for exponential mean-field growth, rather than positive for diffusion. There have been long-standing disagreements among theoretical calculations and comparisons of theory with numerical experiments as to the sign of kinetic ($\beta ^u_{21}$) and magnetic ($\beta ^b_{21}$) contributions. To resolve these discrepancies, we combine an analytical approach with simulations, and show that unlike $\beta ^b_{21}$, the kinetic SCE $\beta ^u_{21}$ has a strong dependence on the kinetic energy spectral index and can transit from positive to negative values at $\mathcal {O}(10)$ Reynolds numbers if the spectrum is not too steep. Conversely, $\beta ^b_{21}$ is always negative regardless of the spectral index and Reynolds numbers. For very steep energy spectra, the positive $\beta ^u_{21}$ can dominate even at energy equipartition urms ≃ brms, resulting in a positive total β21 even though $\beta ^b_{21}\lt 0$. Our findings bridge the gap between the seemingly contradictory results from the second-order-correlation approximation versus the spectral-τ closure, for which opposite signs for $\beta ^u_{21}$ have been reported, with the same sign for $\beta ^b_{21}\lt 0$. The results also offer an explanation for the simulations that find $\beta ^u_{21}\gt 0$ and an inconclusive overall sign of β21 for $\mathcal {O}(10)$ Reynolds numbers. The transient behaviour of $\beta ^u_{21}$ is demonstrated using the kinematic test-field method. We compute dynamo growth rates for cases with or without rotation, and discuss opportunities for further work.

79 ASTRONOMY AND ASTROPHYSICS↗

Kinematics and dynamics of disclination lines in three-dimensional nematics

An exact kinematic law for the motion of disclination lines in nematic liquid crystals as a function of the tensor order parameter Q is derived. Unlike other order parameter fields that become singular at their respective defect cores, the tensor order parameter remains regular. Following earlier experimental and theoretical work, the disclination core is defined to be the line where the uniaxial and biaxial order parameters are equal, or equivalently, where the two largest eigenvalues of Q cross. This allows an exact expression relating the velocity of the line to spatial and temporal derivatives of Q on the line, to be specified by a dynamical model for the evolution of the nematic. By introducing a linear core approximation for Q, analytical results are given for several prototypical configurations, including line interactions and motion, loop annihilation, and the response to external fields and shear flows. Behaviour that follows from topological constraints or defect geometry is highlighted. Finally, the analytic results are shown to be in agreement with three-dimensional numerical calculations based on a singular Maier–Saupe free energy that allows for anisotropic elasticity.

36 MATERIALS SCIENCE↗

Probing Red Blood Cell Mechanics, Rheology and Dynamics with a Two-Component Multi-scale Model

This study is partially motivated by the validation of a new two-component multi-scale cell model we developed recently that treats the lipid bilayer and the cytoskeleton as two distinct components.Here, the whole cell model is validated and compared against several available experiments that examine red blood cell (RBC) mechanics, rheology and dynamics. First, we investigated RBC deformability in a microfluidic channel with a very small cross-sectional area and quantified the mechanical properties of the RBC membrane. Second, we simulated twisting torque cytometry and compared predicted rheological properties of the RBC membrane with experimental measurements. Finally, wemodelled the tank-treading (TT) motion of a RBC in a shear flow and explored the effect of channel width variation on the TT frequency. We also investigated the effects of bilayer–cytoskeletal interactions on these experiments and our simulations clearly indicated that they play key roles in the determination of cell membrane mechanical, rheological and dynamical properties. These simulations serve as validation tests and moreover reveal the capabilities and limitations of the new whole cell model.

Li, Xuejin↗

Gyrokinetic electrostatic turbulence close to marginality in the Wendelstein 7-X stellarator

The transition from strong (fluidlike) to nearly marginal (Floquet-type) regimes of ion-temperature-gradient (ITG) driven turbulence is studied in the stellarator Wendelstein 7-X by means of numerical simulations. Close to marginality, extended (along magnetic field lines) linearly unstable modes are dominant, even in the presence of kinetic electrons, and provide a drive that results in finite turbulent transport. A total suppression of turbulence above the linear stability threshold of the ITG modes, commonly present in tokamaks and known as the “Dimits shift,” is not observed. We show that this is mostly due to the peculiar radial structure of marginal turbulence, which is more localized than in the fluid case and therefore less likely to be stabilized by shearing flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Helical vortex formation in three-dimensional electrochemical systems with ion-selective membranes

The rate of electric-field-driven transport across ion-selective membranes can exceed the limit predicted by Nernst (the limiting current), and encouraging this “overlimiting” phenomenon can improve efficiency in many electrochemical systems. Overlimiting behavior is the result of electroconvectively induced vortex formation near membrane surfaces, a conclusion supported so far by two-dimensional (2D) theory and numerical simulation, as well as experiments. We show that the third dimension plays a critical role in overlimiting behavior. In particular, the vortex pattern in shear flow through wider channels is helical rather than planar, a surprising result first observed in three-dimensional (3D) simulation and then verified experimentally. We present a complete experimental and numerical characterization of a device exhibiting this recently discovered 3D electrokinetic instability, and show that the number of parallel helical vortices is a jump-discontinuous function of width, as is the overlimiting current and overlimiting conductance. In addition, we show that overlimiting occurs at lower fields in wider channels, because the associated helical vortices are more readily triggered than the planar vortices associated with narrow channels (effective 2D systems). These unexpected width dependencies arise in realistic electrochemical desalination systems, and have important ramifications for design optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Torque and Angular-Momentum Transfer in Merging Rotating Bose-Einstein Condensates

When rotating classical fluid drops merge together, angular momentum can be advected from one to another due to the viscous shear flow at the drop interface. It remains elusive what the corresponding mechanism is in inviscid quantum fluids such as Bose-Einstein condensates (BECs). In this work, we report our theoretical study of an initially static BEC merging with a rotating BECin three-dimensional space along the rotational axis. We show that a solitonlike sheet, resembling a corkscrew, spontaneously emerges at the interface. Furthermore, rapid angular momentum transfer at a constant rate universally proportional to the initial angular-momentum density is observed. Strikingly, this transfer does not necessarily involve fluid advection or drifting of the quantized vortices. We reveal that the corkscrew structure can exert a torque that directly creates angular momentum in the static BEC and annihilates angular momentum in the rotating BEC. Uncovering this intriguing angular momentum transport mechanism may benefit our understanding of various coherent matter-wave systems, spanning from atomtronics on chips to dark matter BECs at cosmic scales.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of a Conducting Wall on Z-Pinch Stability

Here, the stabilizing effect of a conducting wall on Z-pinch stability has been investigated through a systematic experimental and numerical study. Numerical simulations of a Z-pinch with a cylindrical conducting wall are compared with a case that modeled perforations in the conducting wall. The conducting wall also acts as the return current path for these investigations. Plasma conditions with various pinch sizes were studied numerically to better understand the effect of wall stabilization in Z-pinches. A study using the ZaP Flow Z-Pinch was performed by inserting a 0.35-m perforated section of electrode that has eight longitudinal slots cut from the outer electrode, reducing the conducting wall material by ≈70% .This modification prevents currents from flowing freely along the azimuthal distance of the outer electrode required to stabilize the m = 1, 2, 3 modes, which are experimentally monitored. Operating with identical experimental parameters with and without the perforated electrode was assumed to produce similar equilibrium and flow shear conditions in the pinch. Comparing the stability characteristics isolated the potential effects of the conducting wall. Magnetic data, interferometry, and optical images indicate that the conducting wall does not have a discernible effect on stability in the ZaP experiment. This result agrees with simulations with similar ratios of conducting wall radius to pinch radius.

42 ENGINEERING↗

Structure-mechanical properties correlation in bulk LiPON glass produced by nitridation of metaphosphate melts

The glassy solid electrolyte Lithium phosphorous oxynitride (LiPON) has been widely researched in thin film solid state battery format due to its outstanding stability when cycled against lithium. In addition, recent reports show thin film LiPON having interesting mechanical behaviors, especially its ability to resist micro-scale cracking via densification and shear flow. Here, in the present study, we have produced bulk LiPON glasses with varying nitrogen contents by ammonolysis of LiPO 3 melts. The resulting compositions were determined to be LiPO 3-3z/2 N z , where 0 ≤ z ≤ 0.75, and the z value of 0.75 is among the highest ever reported for this series of LiPON glasses. The short-range order structures of the different resulting compositions were characterized by infrared, Raman, 31 P magic angle spinning nuclear magnetic resonance, and X-ray photoelectron spectroscopies. Instrumented nano-indentation was used to measure mechanical properties. It was observed that similar to previous studies, both trigonally coordinated (N t ) and doubly bonded (N d ) N co-exist in the glasses in about the same amounts for z ≤ 0.36, the limit of N content in most previous studies. For glasses with z > 0.36, it was found that the fraction of the N t increased significantly while the fraction of N d correspondingly decreased. The incorporation of nitrogen increased both the elastic modulus and hardness of the glass by approximately a factor of 1.5 when N/P ratio reaches 0.75. At the same time, an apparent embrittlement of the glass was observed due to nitridation, which was revealed by nanoindentation with an extra sharp nanoindenter tip.

25 ENERGY STORAGE↗

Pellet injection into H-mode ITER plasma with the presence of internal transport barriers

The impacts of pellet injection into ITER type-1 ELMy H-mode plasma with the presence of internal transport barriers (ITBs) are investigated using self-consistent core-edge simulations of 1.5D BALDUR integrated predictive modeling code. In these simulations, the plasma core transport is predicted using a combination of a semi-empirical Mixed B/gB anomalous transport model, which can self-consistently predict the formation of ITBs, and the NCLASS neoclassical model. For simplicity, it is assumed that toroidal velocity for {omega}{sub E Multiplication-Sign B} calculation is proportional to local ion temperature. In addition, the boundary conditions are predicted using the pedestal temperature model based on magnetic and flow shear stabilization width scaling; while the density of each plasma species, including both hydrogenic and impurity species, at the boundary are assumed to be a large fraction of its line averaged density. For the pellet's behaviors in the hot plasma, the Neutral Gas Shielding (NGS) model by Milora-Foster is used. It was found that the injection of pellet could result in further improvement of fusion performance from that of the formation of ITB. However, the impact of pellet injection is quite complicated. It is also found that the pellets cannot penetrate into a deep core of the plasma. The injection of the pellet results in a formation of density peak in the region close to the plasma edge. The injection of pellet can result in an improved nuclear fusion performance depending on the properties of pellet (i.e., increase up to 5% with a speed of 1 km/s and radius of 2 mm). A sensitivity analysis is carried out to determine the impact of pellet parameters, which are: the pellet radius, the pellet velocity, and the frequency of injection. The increase in the pellet radius and frequency were found to greatly improve the performance and effectiveness of fuelling. However, changing the velocity is observed to exert small impact.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An anisotropic constitutive equation for the stress tensor of blood based on mixture theory

Based on ideas proposed by Massoudi and Rajagopal (M-R), we develop a model for blood using the theory of interacting continua, that is, the mixture theory. We first provide a brief review of mixture theory, and then discuss certain issues in constitutive modeling of a two-component mixture. In the present formulation, we ignore the biochemistry of blood and assume that blood is composed of red blood cells (RBCs) suspended in plasma, where the plasma behaves as a linearly viscous fluid and the RBCs are modeled as an anisotropic nonlinear density-gradient-type fluid. We obtain a constitutive relation for blood, based on the simplified constitutive relations derived for plasma and RBCs. A simple shear flow is discussed, and an exact solution is obtained for a very special case; for more general cases, it is necessary to solve the nonlinear coupled equations numerically.

59 BASIC BIOLOGICAL SCIENCES↗