Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sample handling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

A study of the effects of Rotating Frame Turbulence (RFT) on helicopter flight mechanics

The turbulence actually experienced by a helicopter blade-element significantly differs from the space-fixed free atmospheric turbulence. The turbulence in the rotor disk requires a rotationally sampled description in a rotating frame of reference. It is referred to as the rotating frame turbulence or RFT which exhibits a striking phenomenon. The RFT spectral density versus frequency shows high peak values at 1P,2P, or 3P, frequencies. The energy increase at these peaks is balanced by an energy decrease primarily at the lower-than-1P frequency range. Particularly for low altitude flight regimes of pure helicopters, such as the nap-of-the-earth maneuvers, the conventional space-fixed description of turbulence is not a good approximation, since the turbulence scale length can have values comparable to the rotor radius. Accordingly the flight mechanics characteristics with RFT description are compared with those based on the conventional space-fixed turbulence description. The results demonstrate that the RFT qualitatively and quantitatively affects the prediction of helicopter flight mechanics characteristics in turbulence. Such comparisons should play an important role in the new development of handling qualities specifications for helicopters.

Schrage, D. P.↗

The Direct Path To WIPP - 12471

Sandia National Laboratories/New Mexico (SNL/NM), designated as a small quantity site (SQS) by the National TRU Program (NTP), generated contact-handled (CH) and remote-handled (RH) transuranic (TRU) waste primarily from the decontamination and clean-out of glove boxes at the Hot Cell Facility (HCF) at Technical Area (TA) V. All of the waste required repackaging, with the CH TRU waste being repackaged from late 2007 through 2011. Three shipments of CH were completed in October 2011, which de-inventoried SNL/NM's legacy TRU waste. In FY11, RH TRU waste was repackaged at the Auxiliary Hot Cell Facility (AHCF) located in TAV with the support of the Central Characterization Project (CCP). The waste was originally packaged in SNL/NM fabricated casks, cement or lead-lined 55-gallon drums, or 30-gallon drums. The AHCF is a small hot cell, with access only through a roof port which presented challenges for inserting and removing waste from the hot cell. The CCP provided visual examination operators (VEOs) to observe and document each waste item repackaged, removal of prohibited items, and radiological sampling. Dose-to-Curie measurements were calculated by CCP after a radiological report was prepared using scaling factors determined by the analysis of swipe samples. Finally, headspace gas samples were taken and sent to the Advanced Mixed Waste Treatment Project (AMWTP) for analysis. Despite the challenges, the RH waste is on track to be shipped to WIPP in early FY12. The processes used and procedures developed to conduct the repackaging operations, the issues identified and mitigated were challenging but the cooperation between SNL/NM and the Central Characterization Program (CCP) enabled SNL/NM to complete the repackaging and support the characterization and shipment. An inventory list, identification of the campaigns, discussion of the challenges and mitigations, and the final loading of the RH 72-B casks at TA-V for direct shipment to the Waste Isolation Pilot Plant (WIPP) will be discussed. Lessons learned from the RH campaigns are: - Some containers that were originally identified as HC-3 have been re-evaluated and became < HC-3 due to the conservative estimates made by the original generators - Operators at the AHCF were not accustomed to the detail required by the VE operators. However, they worked well together and the repackaging was completed ahead of schedule. - The AK was not always accurate as was demonstrated by the solid waste found in the drum during the first visit by EPA. That waste has since been determined to be low-level. - Two drums originally thought to be RH turned out to be CH and arrangement for RTR had to be made quickly. - Six of the original RH repacked drums became low level. - Lessons learned from the CH campaigns were helpful in avoiding many issues. The RH repackaging effort has been a success due to the expertise of the AHCF operators, supervisor, and manager, the conscientious attention to detail of the CCP VE operators, the experience of the CCP DTC and headspace gas sampling staff, and the guidance and support from CCP and CBFO. Sometimes schedules had to be adjusted, processes updated, and issues discussed, but the communication between CCP and SNL/NM was good. SNL/NM hopes to have the legacy RH TRU waste shipped off-site by early 2012. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surface Biology & Geology Pathfinder Data Analysis Pipeline

NASA's future global orbital mission, currently in development as the Surface Biology and Geology (SBG) Designated Observable study, will acquire relatively high resolution solar-reflected spectroscopy and thermal infrared observations. Innovative processes must be utilized for handling the high volume of data anticipated to be collected, which is anticipated to exceed 100 terabytes/day, greater than NASA's total extant airborne hyperspectral data collection. Collecting, processing/re-processing, disseminating, and exploiting this volume of data presents new challenges. To begin addressing them, NASA is drawing upon the expertise developed from its astrophysics programs to address Earth science and applications. Specifically, NASA is adapting the science processing operations technology developed for the Kepler and TESS planet-hunting missions for imaging spectroscopy data processing. This technology development has been the foundation for the remarkable scientific successes of Kepler and TESS. The Kepler/TESS data processing technology provides a scalable architecture for robust, repeatable, and replicable science and application products while enabling the Earth science community to develop, test, and implement new algorithms. Our effort to leverage this existing capability has begun by ingesting data and applying workflows from the EO-1/Hyperion 17-year mission archive that provides globally sampled visible through shortwave infrared spectra that are representative of SBG data types and volumes. This pathfinding data processing system will help define the solutions to processing SBG data volumes and will enable the scientific community to interact with the data and processing pipeline to create new science products.

Jenkins, Jon↗

IMPROVING BIOMASS LOGISTICS COST WITHIN AGRONOMIC SUSTAINABILITY CONSTRAINTS AND BIOMASS QUALITY TARGETS

Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements in quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.

09 BIOMASS FUELS↗

Biomass Logistics

Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements in quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.

09 BIOMASS FUELS↗

Wear and Corrosive Behaviors of Electroless Ni-LaCl{sub 3} Composites on Nanoporous ATO Surface of Ti Substrate

Ti and its alloys, because of its poor wear and oxidation resistance, have seriously restricted its industrial applications in the dry friction conditions. Herein we reported an easy-handling and effective approach for electroless Ni-LaCl{sub 3} nanocomposite films on nanoporous ATO surface of Ti substrate to modify its surface properties. Anodized titanium oxide, shorted as ATO, was designed as a template to deposit Ni-LaCl{sub 3} films on Ti surface with superior bonding interface. By adjusting the anodizing voltage from DC 60 to 240 V, the surface of ATO templates was manipulated to achieve a suitable diameter of nanopores using high voltage with low-current density state. The as-received Ni-LaCl{sub 3} film with a leaflike surface was successfully formed on to ATO surface. With an increase in LaCl{sub 3} addition from 0 to 4.0 g L{sup −1} in bath, results indicated that the diversified orientations of Ni crystals along Ni (111), (200), (220) and (311) were detected for Ni-LaCl{sub 3} films, rather than preferred directions of Ni (111) and (200) for pure Ni sample. As expected, the specific wear rate was ~ 10{sup −5} mm{sup 3} (N m){sup −1} for Ni-4.0 g L{sup −1} LaCl{sub 3} films, which was two times lower than that of the un-coated Ti substrate. Besides a lower microhardness of ~ 629 HV{sub 0.2} was detected for pure Ni, which was much lower that of ~ 752 HV{sub 0.2} for Ni-LaCl{sub 3} films, but higher than that of ~ 336 HV{sub 0.2} for Ti substrate. In addition, a superior corrosion resistance was obtained for Ni-LaCl{sub 3} composites relative to pure Ni, which was ascribed to the coexistence of La{sup 3+} ions and its La-rich insoluble products on its corroded surfaces for completing the pitting holes. In view of these, the as-deposited Ni-LaCl{sub 3} films on the surface of Ti substrate could guide an available proposal for surface modifying of Ti alloys against the wear corrosive failures, further intensifying their servicing life as subjected to harsh conditions.

36 MATERIALS SCIENCE↗

Nanocomposite thermite powders with improved flowability prepared by mechanical milling

Nanocomposite thermite powders can be used in reactive parts and components. Manufacturing these components requires tailoring powder particle size distributions, particle shapes, and powder flowability. Specifically, an improved flowability is desired to use such powders as feedstock in additive manufacturing. Arrested reactive milling (ARM) offers a versatile and practical approach for preparing nanocomposite thermites with fully dense particles, which will retain their structures and mixedness between reactive components while being stored, handled, and processed. However, ARM products usually have broad particle size distributions, rock-like particle shapes, and poor flowability. Here in this study, ARM is modified to include a low-energy milling step to tune the shapes and flowability of the prepared powders. Experiments are performed with aluminum-rich Al·Fe 2 O 3 thermites. After the initial nanocomposite thermite is prepared in a planetary mill, it is additionally milled at a reduced rotation rate, replacing milling balls with smaller glass beads, and adding different liquid process control agents. Powders with modified particle shapes and size distributions are obtained, which have substantially improved flowability compared to the initial material. The reactivity of the initial and modified powders is evaluated using their ignition on a heated wire, by electro-static discharge, by thermal analysis (DSC) and in constant volume explosion tests. Finally, the reactivity of the modified powders is not diminished; instead, an improved reactivity is observed for selected samples.

36 MATERIALS SCIENCE↗

Deep Geothermal Drilling Using Millimeter Wave Technology (Final Technical Research Report)

Conventional drilling methods are very mature, but still have difficulty drilling through very deep,very hard and hot rocks for geothermal, nuclear waste entombment and oil and gas applications.This project demonstrated the capabilities of utilizing only high energy beams to drill such rocks,commonly called ‘Direct Energy Drilling’, which has been the dream of industry since the invention of the laser in the 1960s. A new region of the electromagnetic spectrum, millimeter wave (MMW) wavelengths at 30-300 giga-hertz (GHz) frequency was used to accomplish this feat. To demonstrate MMW beam drilling capabilities a lab bench waveguide delivery, monitoring and instrument system was designed, built and tested around an existing (but non-optimal) 28 GHz frequency, 10 kilowatt (kW) gyrotron. Low waveguide efficiency, plasma generation and reflected power challenges were overcome. Real-time monitoring of the drilling process was also demonstrated. Then the technical capability of using only high power intense millimeter waves to melt (with some vaporization) four different rock types (granite, basalt, sandstone, limestone) was demonstrated through 36 bench tests. Full bore drilling up to 2” diameter (size limited by the available MMW power) was demonstrated through granite and basalt samples. The project also demonstrated that MMW beam transmission losses through high temperature (260°C, 500oF), high pressure (34.5 MPa, 5000 psi) nitrogen gas was below the error range of the meter long path length test equipment and instruments utilized. To refine those transmission losses closer, to allow extrapolation to very great distances, will require a new test cell design and higher sensitivity instruments. All rock samples subjected to high peak temperature by MMW beams developed fractures due to thermal stresses, although the peak temperature was thermodynamically limited by radiative losses. Therefore, this limited drill rate and rock strength data were not able to be determined experimentally. New methods to encapsulate larger rock specimens must be developed and higher power intensities are needed to overcome these limitations. It was demonstrated that rock properties are affected (weakening then strengthened) by exposure to high temperatures. Since only MMW beams can economically reach rock temperatures of over 1650°C, even exceeding 3000°C, that can cause low viscosity melts or vaporization of rocks. Future encapsulated rock specimens must provide sufficiently large sizes of thermally impacted material to provide for the necessary rock strength, permeability and other analyzes required. Multiple MMW field systems, tools and methods for drilling and lining were identified. It was concluded that forcing a managed over-pressure drilling operation would overcome water influx and hot rock particulates handling problems, while simultaneously forming the conditions necessary to create a strong, sealing rock melt liner. Materials that contact hot rock surfaces were identified for further study. High power windows and gases for beam transmission under high pressures are critical paths for some of the MMW drilling systems. Straightness/ alignment can be a great benefit or a problem, especially if a MMW beam is transmitted through an existing, conventionally drilled bore.

04 OIL SHALES AND TAR SANDS↗

Tritium permeability measurement in hydrogen-tritium system

Fusion power promises to provide electricity generation with outstanding safety and environmental performance. Safety plays a crucial role in fusion material selection since tritium behavior in materials determines two key safety evaluation source terms: in-vessel inventory source term and ex-vessel release term, which are used in reactor safety assessments for licensing fusion facilities. Tritium permeation through materials at elevated temperature during long pulse operation expected in a burning plasma environment will become a major safety issue and development of tritium permeation barrier materials is required to minimize ex-vessel release to the environment [1]. Extensive work on hydrogen and deuterium behavior in fusion materials has been conducted, but very little database is available for tritium, the radioactive fuel for future reactors, due to the cost and difficulty associated with handling tritium [2]. A majority of the experiments were carried out at high hydrogen/deuterium partial pressure (> 100 Pa), but the expected tritium partial pressure in the blanket system is at low tritium partial pressure (< 100 Pa), where the tritium behavior deviates from diffusion-limited to surface-limited permeation. At these pressures the behavior of tritium is suspected to deviate from diffusion-limited to surface-limited permeation or isotope-limited [3]. The use of tritium enables us to investigate hydrogen isotope behavior in low partial pressure range with beta radiation detection. The physics of two-component hydrogen (H+T) permeation through metal in the surface-limited regime and through liquid breeding material are still too poorly understood to confidently design environmentally benign and safe fusion systems. In this paper, we discuss development of tritium permeation system for low tritium partial pressure [4], and discuss the results from two-component hydrogen (H+T) permeation in 20 mm disc samples of pure alpha-iron at H2 partial pressure of 100 Pa, wide T2 partial pressure range from 10-12 to 10 Pa, and sample temperature up to 600 °C to uncover the basic scientific understanding of tritium permeation behavior at realistic blanket conditions for DEMO. [1] FESAC report on “Opportunities for Fusion Materials Science and Technology Research Now and During the ITER Era” (2012) DOE/SC-0149 [2] R.A. Causey, R.A. Karnesky, and C. San Marchi, “4.16 Tritium Barriers and Tritium Diffusion in Fusion Reactors”, Comprehensive Nuclear Materials (2012) Chapter 4.16. [3] P. Humrickhouse “Permeation of Tritium and Hydrogen in the Diffusion-Limited and Surface–Limited Regimes”, submitted to Journal of Nuclear Materials. [4] R.J. Pawelko, M. Shimada, K. Katayama, S. Fukada, P.W. Humrickhouse, and T. Terai, “Low tritium partial pressure permeation system for mass transport measurement in lead lithium eutectic”, Fusion Engineering and Design 102 (2016) 8

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rapid Crystallization of Zeolites with Controllable Defects: Disentangling Fluoride Concentration and pH Using NH 4 F

Zeolite synthesis is typically conducted either under basic conditions or in neutral fluoride media using hydrofluoric acid (HF). While basic (OH − ) conditions generally result in faster zeolite crystallization, they can also increase the likelihood of framework defects and crystal intergrowths. In contrast, synthesis in neutral fluoride media tends to produce fewer defects because fluoride balances positive charges from structure-directing agents. However, this method often requires significantly longer crystallization times and involves the handling of dangerous HF. In the present study, we pursue the best of both synthesis conditions, rapid syntheses with controllable defect concentrations, by disentangling of mineralizing agent and chargebalancing agent using ammonium fluoride (NH 4 F) as an alternative to HF. We have investigated the use of NH 4 F in the syntheses of siliceous and aluminum-containing zeolite A (LTA, small pore), ZSM-5 (MFI, medium pore), and siliceous Beta(*BEA, large pore). The crystallization times of all four zeolites decreased substantially with an increasing NH 4 F concentration. Crystallization times were reduced from 24 to 4 h (Si-LTA), 96 to 36 h (Al-LTA), 240 to 6 h (ZSM-5), and 24 to 3 h (Si-*BEA). Additionally, increasing the NH 4 F concentration in the synthesis mixtures decreases the defect densities of siliceous zeolites. Raman spectroscopy, along with 29 Si MAS NMR, 19 F MAS NMR, 13 C MAS NMR, and fluorine elemental analysis of Si-LTA samples confirms that the reduction in charged defects (Si−O − ) is due to the higher incorporation of F − within the double four-membered ring (D4R) present in the LTA samples. We show that the accelerated crystallization is due to the role of F − in enhancing the silica mineralization rate (formation of silicon hexafluoride species) and stabilizing D4Rs under basic conditions. As a result, combining basic and fluoride-mediated synthesis could therefore be advantageous for faster zeolite production and improved control over structural properties for a wide variety of zeolite structures.

Anions↗

FPGA Coprocessor Design for an Onboard Multi-Angle Spectro-Polarimetric Imager

A multi-angle spectro-polarimetric imager (MSPI) is an advanced camera system currently under development at JPL for possible future consideration on a satellite-based Aerosol-Cloud-Environ - ment (ACE) interaction study. The light in the optical system is subjected to a complex modulation designed to make the overall system robust against many instrumental artifacts that have plagued such measurements in the past. This scheme involves two photoelastic modulators that are beating in a carefully selected pattern against each other. In order to properly sample this modulation pattern, each of the proposed nine cameras in the system needs to read out its imager array about 1,000 times per second. The onboard processing required to compress this data involves least-squares fits (LSFs) of Bessel functions to data from every pixel in realtime, thus requiring an onboard computing system with advanced data processing capabilities in excess of those commonly available for space flight. As a potential solution to meet the MSPI onboard processing requirements, an LSF algorithm was developed on the Xilinx Virtex-4FX60 field programmable gate array (FPGA). In addition to configurable hardware capability, this FPGA includes Power -PC405 microprocessors, which together enable a combination hardware/ software processing system. A laboratory demonstration was carried out based on a hardware/ software co-designed processing architecture that includes hardware-based data collection and least-squares fitting (computationally), and softwarebased transcendental function computation (algorithmically complex) on the FPGA. Initial results showed that these calculations can be handled using a combination of the Virtex- 4TM Power-PC core and the hardware fabric.

Pingree, Paula J.↗

Photocatalytic hydrogen production using visible-light-responsive Ta{sub 3}N{sub 5} photocatalyst supported on monodisperse spherical SiO{sub 2} particulates

Graphical abstract: A simple and effective sol–gel process followed by nitridation in an NH{sub 3} flow has been developed to deposit Ta{sub 3}N{sub 5} semiconductor photocatalyst layers onto monodisperse spherical SiO{sub 2} particles. The obtained Ta{sub 3}N{sub 5}/SiO{sub 2} particles maintain an original spherical morphology of SiO{sub 2} and a sub-micrometer size with a narrow size distribution and without aggregation. The presence of SiO{sub 2} support shows at least no detrimental effects on photocatalytic activity, but tunes the secondary particle size to control dispersibility of the photocatalyst in the solution. - Highlights: • Fine nanoparticles of Ta{sub 3}N{sub 5} were immobilized on the surfaces of SiO{sub 2} giving SiO{sub 2}@Ta{sub 3}N{sub 5} core–shell spheres successfully produced H{sub 2} from methanol solution under visible light. • The presence of support (SiO{sub 2}) ensures the dispersion of the particulate in solution maintaining high photocatalytic activity of Ta{sub 3}N{sub 5}. • The obtained supported photocatalyst gives uniform size distribution and control the degree of dispersibility in the solution, which may control nature of light absorption and reflection of the photoreactor. - Abstract: Fine nanoparticles of Ta{sub 3}N{sub 5} (10–20 nm) were synthesized on the surfaces of SiO{sub 2} spheres with a diameter of ∼550 nm. A sol–gel method was used to modify the surface of SiO{sub 2} with Ta{sub 2}O{sub 5} from TaCl{sub 5} dissolved in ethanol in the presence of citric acid and polyethylene glycol. The resulting oxide composites were treated in an NH{sub 3} flow at 1123 K to form core–shell structured Ta{sub 3}N{sub 5}/SiO{sub 2} sub-microspheres. The obtained samples were characterized using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDX), transmission electron microscopy (TEM), and photocatalytic activity measurements for H{sub 2} evolution from an aqueous methanol solution. The XRD results demonstrate the expected sequential formation of Ta{sub 2}O{sub 5} layers, followed by Ta{sub 3}N{sub 5} after nitridation on the Ta{sub 2}O{sub 5}/SiO{sub 2} composite. SEM and TEM observations indicate that the obtained Ta{sub 3}N{sub 5}/SiO{sub 2} sub-microspheres have a uniform size distribution with high crystallinity and an obvious core–shell structure. The presence of support maintained the intrinsic photocatalytic activity of Ta{sub 3}N{sub 5} nanoparticles, but it did drastically improve the dispersion of the photocatalysts in the solution. This study proposes the use of an inert support in photocatalytic reactors to improve ease of handling the powder photocatalyst for gas-phase photocatalysis and the suspension of the solution, controlling nature of light harvesting and degree of scattering of the photoreactor.

36 MATERIALS SCIENCE↗

High Energy X-ray Applications for the Characterization of Metallic Uranium Alloys

Uranium-based metallic alloys are both candidates for fuels in high performance research and test reactors, as well as in fast spectrum reactors as nuclear transmutation fuels that can be utilized to burn long-lived minor actinides and fission products. Uranium-molybdenum (UMo) alloys are under development for the use in research and test reactors. Whereas, uranium-zirconium (U-Zr) alloys represent one of the types of fuels that are under consideration for use within the fast spectrum reactors. Both of these types of metallic fuels have been studied for over five decades in various types of reactors. Many of the previous studies had focused on performance-based aspects. However, recent advances in characterization tools and techniques, as well as short-term (low fluence) neutron irradiation facilities have contributed to a more in-depth understanding of nuclear fuel and material behavior following irradiation. This knowledge is crucial to the enhancement of current modeling and simulation techniques, particularly with respect to parameterization and validation. This paper focuses on the use of high energy x-rays to characterize metallic nuclear fuel. The specimens were composed of depleted uranium (DU) alloyed with either Zr or Mo, where DU-xZr (x = 10, 15, or 20 wt.%) and DU-yMo (y = 7 or 10 wt.%). The geometries of the specimens were 3 mm TEM disks that were ∼200 μm in thickness. The fuel alloys were initially prepared via an arc melting process. The samples were irradiated at the Advanced Test Reactor at Idaho National Laboratory (INL) using the hydraulic rabbit system. The hydraulic rabbit system allows for well-controlled, short term irradiations (less than one cycle), hence resulting in low fluences. The U-based alloys were irradiated to doses of 0.01 and 0.1 dpa. The irradiation temperature of the specimens ranged from 150 deg. C to 800 deg. C. Synchrotron characterization techniques can be used to provide insight into material microstructure ranging a multitude of spatial scales, from the atomic scale to the macroscale. High-energy x-rays at the National Synchrotron Light Source II (NSLS II) and the Advanced Photon Source (APS) have been utilized to understand the microstructural changes in these metallic alloys, specifically with respect to phase identification, phase fractions, chemical bonding, strain, and dislocation density through the use of diffraction and X-ray Absorption Spectroscopy (XAS). These experiments utilized a robot for specimen exchange during the diffraction measurements, allowing for remote handling of radioactive materials. This is an example of another recent advancement in characterization techniques that enables research with nuclear materials. Detailed results of the analyses of the microstructural changes are pending.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The F-t-Pj-RG method: An adjacent-rolling-windows based steady-state detection technique for application to kinetic Monte Carlo simulations

A window-based steady-state detection algorithm has been developed for application to kinetic Monte Carlo simulation data. The algorithm, termed F-t-Pj-RG sequentially applies an F-test, a t-test, and a projection test on adjacent windows of the data while rolling (or shifting) and growing the windows when any of the tests fail. In aggregate, the algorithm is able to (a) automatically reject the warm-up period as not being at steady-state, as well as (b) determine an appropriate window size for converged statistics when sampling the data, which is necessary for detection of steady-state, and (c) detect steady-state within a particular tolerance. The last step, the projection test, is actually an oscillating-slope projection test, and is performed on j sequential data windows (i.e., more than two adjacent windows). It requires more than simply being within the user defined tolerance: the oscillating-slope projection test includes a condition that the slope must oscillate around zero when 2, which is an additional indication of steady-state. When all three tests are passed, the F-t-Pj test is passed, indicating that the prerequisites of steady-state detection have been met and also that conditions consistent with the definition of steady-state have been realized. This algorithm is applied to a variety of data sets that correspond to the diverse type of data trends that can be produced by kinetic Monte Carlo simulations. The algorithm is shown to be robust in its ability to handle differing functional forms, and is able to detect steady-state with low computational cost. Finally, the low computational cost of this method and its robustness towards varied data trends make it suitable for on-the-fly use in kinetic Monte Carlo simulations.

97 MATHEMATICS AND COMPUTING↗

Uncertainty and Sensitivity Analysis of Reactivity Insertion Accidents using BISON Fuel Performance Code

The development of Accident Tolerant Fuels (ATF) has expanded into a considerable research program in the wake of the events at the Japanese Fukushima Daiichi nuclear power plant in 2011. The ATF goal is to insert a test assembly into a commercial reactor by 2022. To support this, testing of the ATF design under off-normal conditions is needed to assess the 'enhanced accident tolerance' capability of the fuel rod design over standard UO{sub 2}-Zircaloy concepts. Transient testing capabilities are necessary for off-normal testing of events such as loss of coolant accidents (LOCA) and reactivity insertion accidents (RIA). A transient testing program has been developed to support the testing of ATF designs. The Transient Reactor Test (TREAT) facility has been chosen as the site to perform the transient testing of the ATF designs. TREAT is a versatile test facility capable of subjecting fuel specimens to various off-normal conditions. Historic TREAT experiments were performed in a variety of experimental test vehicles including static environment capsules, once-through flowing systems, and also recirculating flowing systems. The planned TREAT experiments will be operated under PWR conditions. Therefore, a static capsule vehicle is under development to handle required temperatures and pressures. The static capsule, termed the Static Environment Rodlet Transient Test Apparatus (SERTTA), will be used for irradiation tests in TREAT to subject ATF fuel rodlets to a range of power pulse conditions and environments. To aid in the design and analysis of future tests in TREAT, the fuel performance code BISON is being used. Fuel performance codes capable of accident modeling have been developed for some time and they have shown an ability to reproduce experimental results with some degree of adequacy, but they still require extensive verification and validation. Future experiments in TREAT will add to a limited database of past transient tests performed in transient reactors to support LWR systems. These tests can be used for future verification and validation of fuel performance codes. Understanding the impact of the uncertainty of influential parameters is critical for not only analyzing the results of the experiment but also for modeling and validation of codes. For example, uncertainties associated with the initial manufactured state of the sample, instrument measurements, material property models, and planned experiment conditions can provide important insight into model performance, experimental data, and play an important role in experimental design. The objective of this work is to perform an uncertainty and sensitivity analysis on a simplified RIA case of a standard UO{sub 2}-Zircaloy sample using expected nominal conditions in the SERTTA capsule in TREAT. The BISON fuel performance code is used in conjunction with DAKOTA (Design Analysis Kit for Optimization and Tera-scale Applications) to perform the uncertainty and sensitivity analysis. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Explicit physics-informed neural networks for nonlinear closure: The case of transport in tissues

In upscaling methods, closures for nonlinear problems present a well-known challenge. While a number of theoretical methods have been proposed for handling such closures, nonlinearities still remain a significant obstacle for many problems. In this work, we use a combination of formal upscaling and data-driven machine learning for explicitly closing a nonlinear transport and reaction process in multiscale tissues. The classical effectiveness factor model is used to formulate the macroscale reaction kinetics. We train a multilayer perceptron network using training data generated by direct numerical simulations over microscale examples. Once trained, the network is used in an algorithm for numerically solving the upscaled (coarse-grained) differential equation describing mass transport and reaction in two example tissues. The network is described as being explicit in the sense that the network is trained using macroscale concentrations and gradients of concentration as components of the feature space rather than incorporating them as part of a constraint in the optimization process. Network training and solutions to the macroscale transport equations were computed for two different tissues. The two tissue types (brain and liver) exhibit markedly different geometrical complexity and spatial scale (cell size and sample size). The upscaled solutions for the average concentration are compared with numerical solutions derived from the microscale concentration fields by a posteriori averaging. There are three outcomes of this work of particular note. 1) Our overall approach results in an upscaled nonlinear PDE. The PDE is closed using a neural network, and our approach results in the definition of the classical effectiveness factor for effecting closure. 2) We identify particular source terms for the closure problem that are important for representing the structure of the closure. These source terms involve macroscale concentrations and their gradients. We adopt these source terms to use as explicit features in the learning algorithm. We find the trained networks that include the macroscale source terms generate models that are able to predict the correction factor with increased fidelity over those that do not. 3) We find that the trained network exhibits good generalizability, and it is able to predict the effectiveness factor with high fidelity for realistically-structured tissues despite the significantly different scale and geometrical complexity of the two example tissue types. This latter result emphasizes our purposeful connection between conventional averaging methods with the use of machine learning for closure; this contrasts with some machine learning methods for upscaling where the exact form of the macroscale equation remains unknown.

97 MATHEMATICS AND COMPUTING↗

SAM Code Enhancements for Modeling of Liquid Metal-Cooled Fast Reactor Concepts

The SAM code is under development and supported by DOE-NE’s Nuclear Energy Advanced Modeling and Simulation program as a modern system-level modeling and simulation tool for advanced non-light water reactor safety analyses. These advanced reactor concepts incorporate novel and improved approaches to achieve safety and economic feasibility. This report summarizes two major efforts in addressing the modeling gaps in SAM for liquid-metal-cooled fast reactor (LMFR) applications, i.e. thermal mixing and stratification phenomena in large pools and corrosion-oxidation of components in flowing lead. A new one-dimensional model for thermal mixing and stratification effects in large pools and enclosures is developed and implemented. Thermal mixing and stratification occur when fluid enters a pool at a temperature different than the bulk fluid itself, a scenario often encountered during transients in pool-type systems. These phenomena are critical for the safety of reactors, impacting phenomena like natural circulation, which is essential for passive cooling. The improved model in SAM addresses limitations of state-of-the-art approaches by combining one-dimensional (1D) channels, representing the coolant jet flow, with lumped-parameter zero-dimensional (0D) pools, representing the rest of coolant in the tank. Energy exchange between the 1D jet and the 0D pools is based on heat transfer correlations calibrated against 3D simulations. It is verified that this model can handle various flow configurations, including hot jets in colder pools, cold jets in hotter pools, and the presence of features like ceilings, free surfaces, and obstacles. Additionally, validation against experimental data demonstrates the ability of the model to capture mixing and stratification effects in a wide range of conditions. The flexibility and improved accuracy of the new model make it a valuable tool for reactor safety analysis, allowing for the simulation of different geometries encountered in advanced reactors. A system-level corrosion modeling capability is developed and implemented in SAM to support Lead Fast Reactor (LFR) development. Although the initial focus of this capability will be on LFR application, this can later be expanded to include other liquid metals such as Lead-Bismuth Eutectic (LBE) and PbLi. This report summarizes the common corrosion mitigation strategies and outlines the progress on implementing and validating a corrosion-oxidation model in SAM. Verification and validation of the corrosion-oxidation portion of the model was performed using analytical solution and measured data from samples tested in the non-isothermal pumped lead loop at IPPE Obninsk. The iron transport and corrosion/precipitation portion of the model was assessed using an analytical model and measured corrosion depths from a natural convection lead loop experiment performed at CEA. It is demonstrated that the model implemented in SAM performed well in these assessments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Material Characterization and Geometric Segmentation of a Composite Structure Using Microfocus X-Ray Computed Tomography Image-Based Finite Element Modeling

This study utilizes microfocus x-ray computed tomography (CT) slice sets to model and characterize the damage locations and sizes in thermal protection system materials that underwent impact testing. ScanIP/FE software is used to visualize and process the slice sets, followed by mesh generation on the segmented volumetric rendering. Then, the local stress fields around several of the damaged regions are calculated for realistic mission profiles that subject the sample to extreme temperature and other severe environmental conditions. The resulting stress fields are used to quantify damage severity and make an assessment as to whether damage that did not penetrate to the base material can still result in catastrophic failure of the structure. It is expected that this study will demonstrate that finite element modeling based on an accurate three-dimensional rendered model from a series of CT slices is an essential tool to quantify the internal macroscopic defects and damage of a complex system made out of thermal protection material. Results obtained showing details of segmented images; three-dimensional volume-rendered models, finite element meshes generated, and the resulting thermomechanical stress state due to impact loading for the material are presented and discussed. Further, this study is conducted to exhibit certain high-caliber capabilities that the nondestructive evaluation (NDE) group at NASA Glenn Research Center can offer to assist in assessing the structural durability of such highly specialized materials so improvements in their performance and capacities to handle harsh operating conditions can be made.

Abdul-Aziz, Ali↗