SEARCH · Engineering Papers

Results for “regularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Parallel execution of a three-dimensional, chemically reacting, Navier-Stokes code on distributed-memory machines

This paper describes the parallel version of the three-dimensional, chemically reacting, computational fluid dynamics (CFD) code, SPARK. This work was performed on the Intel iPSC/860-based parallel computers. The SPARK code utilizes relatively simple explicit numerical algorithms, but models complex chemical reactions. The code solves the equations over a regular structured mesh so a simple dam decomposition is used to assign work to the individual processors. The explicit nature of the algorithm, combined with the computational intensity of the chemistry calculations, results in a very low communication-to-computation ratio when compared to typical CFD codes. The efficiency of the parallel code is examined and shown to be about 65 percent when the problem size is scaled with the number of processors. Two low-angle wall-jet injection cases are solved to demonstrate the capability of the parallel code for solving large problems efficiently.

Otto, John C.↗

NASA NTRS1993

A 4-year climatology of stratospheric ozone from lidar measurements at Table Mountain, 34.4 deg N

Regular measurements of stratospheric ozone concentration profiles have been made at Table Mountain, California, since February 1988. During the period up to the end of December 1991, 435 independent profiles were measured by the differential absorption lidar technique. These long-term results and an evaluation of their quality are presented in this paper. The large number of measurements made allowed the development of a short-term, 4-year, climatology of the ozone concentration profile at this specific location (34.4 deg N, - 117.7 deg W). The effects of the eruption of Mount Pinatubo were not observed in the lidar measurements until August 1991, so that the results presented here can essentially be considered as the pre-Pinatubo climatology.

Mcdermid, I. S.↗

NASA NTRS1993

Unstructured viscous grid generation by advancing-layers method

A new method of generating unstructured triangular/tetrahedral grids with high-aspect-ratio cells is proposed. The method is based on new grid-marching strategy referred to as 'advancing-layers' for construction of highly stretched cells in the boundary layer and the conventional advancing-front technique for generation of regular, equilateral cells in the inviscid-flow region. Unlike the existing semi-structured viscous grid generation techniques, the new procedure relies on a totally unstructured advancing-front grid strategy resulting in a substantially enhanced grid flexibility and efficiency. The method is conceptually simple but powerful, capable of producing high quality viscous grids for complex configurations with ease. A number of two-dimensional, triangular grids are presented to demonstrate the methodology. The basic elements of the method, however, have been primarily designed with three-dimensional problems in mind, making it extendible for tetrahedral, viscous grid generation.

Pirzadeh, Shahyar↗

NASA NTRS1992

Gap probability - Measurements and models of a pecan orchard

Measurements and models are compared for gap probability in a pecan orchard. Measurements are based on panoramic photographs of 50* by 135 view angle made under the canopy looking upwards at regular positions along transects between orchard trees. The gap probability model is driven by geometric parameters at two levels-crown and leaf. Crown level parameters include the shape of the crown envelope and spacing of crowns; leaf level parameters include leaf size and shape, leaf area index, and leaf angle, all as functions of canopy position.

Strahler, Alan H.↗

NASA NTRS1992

Albedo patterns and gypsum generation in the central Namib Desert - Land, sea and air interactions on an arid West Coast

In the central Namib Desert, dune-free surfaces are separated abruptly from a sea of yellow and red sand dunes at the Kuiseb River canyon. The off-white hues of the dune-free area result from anomalously high surficial gypsum enrichment. Satellite imagery indicates that the gypsum surfaces are associated with lower surface maximum temperatures than those of the darker dune surfaces to the south. One of various sources of sulfate for the gypsum bodies is oceanic H2S, supplied to desert land-surfaces by regular fog incursions. Since fog events are widespread along the coast, the question of anomalous gypsum accumulations north of the dune sea arises. Satellite imagery, in conjunction with more detailed handheld photography from the space shuttle, indicates that the penetration of fog inland is significantly greater over the gypsum surfaces than it is over the dunes. It is postulated that the thermal gradient between these surfaces generates a heat low centered over the northern part of dune sea and that this enhances fog and H2S advection on its north side onto the nearby dune-free zone. In such a system, gypsum/caliche surfaces reinforce advection of fog over themselves in a positive feedback mode.

Wilkinson, M. J.↗

NASA NTRS1993

Recursive dynamics algorithm for multibody systems with prescribed motion

This paper uses spatial operator techniques to develop a new algorithm for the dynamics of multibody systems with hinges undergoing prescribed motion. This algorithm is spatially recursive, and its computational complexity grows only linearly with the number of degrees of freedom in the system. Its structure is a hybrid of known recursive forward and inverse dynamics algorithms for regular multibody systems. Changes to the prescribed/nonprescribed nature of hinges can be implemented during run time since they are handled with very low overhead in the algorithm.

Jain, Abhinandan↗

NASA NTRS1993

On the existence of touch points for first-order state inequality constraints

The appearance of touch points in state constrained optimal control problems with general vector-valued control is studied. Under the assumption that the Hamiltonian is regular, touch points for first-order state inequalities are shown to exist only under very special conditions. In many cases of practical importance these conditions can be used to exclude touch points a priori without solving an optimal control problem. The results are demonstrated on a simple example.

Seywald, Hans↗

NASA NTRS1993

Matched asymptotic expansion of the Hamilton-Jacobi-Bellman equation for aeroassisted plane-change maneuvers

In this paper we develop a general procedure for constructing a matched asymptotic expansion of the Hamilton-Jacobi-Bellman equation based on the method of characteristics. The development is for a class of perturbation problems whose solution exhibits two-time-scale behavior. A regular expansion for problems of this type is inappropriate since it is not uniformly valid over a narrow range of the independent variable. Of particular interest here is the manner in which matching and boundary conditions are enforced when the expansion is carried out to first order. Two cases are distinguished - one where the left boundary condition coincides with or lies to the right of the singular region and one where the left boundary condition lies to the left of the singular region. A simple example is used to illustrate the procedure, and its potential application to aeroassisted plane change is described.

Calise, Anthony J.↗

NASA NTRS1993

Generating local addresses and communication sets for data-parallel programs

Generating local addresses and communication sets is an important issue in distributed-memory implementations of data-parallel languages such as High Performance FORTRAN. We show that, for an array A affinely aligned to a template that is distributed across p processors with a cyclic(k) distribution and a computation involving the regular section A(l:h:s), the local memory access sequence for any processor is characterized by a finite state machine of at most k states. We present fast algorithms for computing the essential information about these state machines, and extend the framework to handle multidimensional arrays. We also show how to generate communication sets using the state machine approach. Performance results show that this solution requires very little run-time overhead and acceptable preprocessing time.

Chatterjee, Siddhartha↗

NASA NTRS1993

A time-accurate high-resolution TVD scheme for solving the Navier-Stokes equations

A total variation diminishing (TVD) scheme has been developed and incorporated into an existing time-accurate high-resolution Navier-Stokes code. The accuracy and the robustness of the resulting solution procedure have been assessed by performing many calculations in four different areas: shock tube flows, regular shock reflection, supersonic boundary layer, and shock boundary layer interactions. These numerical results compare well with corresponding exact solutions or experimental data.

Kim, Hyun D.↗

NASA NTRS1993

An air/sea flux model including the effects of capillary waves

An improved model of the air/sea interface is developed. The improvements consist in including the effect of capillary (surface tension) waves on the tropical surface fluxes and the consideration of the sea state, both of which increase the magnitude of tropical surface fluxes. Changes in surface stress are most significant in the low wind-speed regions, which include the areas where westerly bursts occur. It is shown that the changes, from the regular wind conditions to those of a westerly burst or El-Nino, can double when the effects of capillary waves are considered. This implies a much stronger coupling between the ocean and the atmosphere than is predicted by other boundary layer models.

Bourassa, Mark A.↗

NASA NTRS1985

Balloon-based interferometric techniques

A balloon-borne triple-etalon Fabry-Perot Interferometer, observing the Doppler shifts of absorption lines caused by molecular oxygen and water vapor in the far red/near infrared spectrum of backscattered sunlight, has been used to evaluate a passive spaceborne remote sensing technique for measuring winds in the troposphere and stratosphere. There have been two successful high altitude balloon flights of the prototype UCL instrument from the National Scientific Balloon Facility at Palestine, TE (May 80, Oct. 83). The results from these flights have demonstrated that an interferometer with adequate resolution, stability and sensitivity can be built. The wind data are of comparable quality to those obtained from operational techniques (balloon and rocket sonde, cloud-top drift analysis, and from the gradient wind analysis of satellite radiance measurements). However, the interferometric data can provide a regular global grid, over a height range from 5 to 50 km in regions of clear air. Between the middle troposphere (5 km) and the upper stratosphere (40 to 50 km), an optimized instrument can make wind measurements over the daylit hemisphere with an accuracy of about 3 to 5 m/sec (2 sigma). It is possible to obtain full height profiles between altitudes of 5 and 50 km, with 4 km height resolution, and a spatial resolution of about 200 km, along the orbit track. Below an altitude of about 10 km, Fraunhofer lines of solar origin are possible targets of the Doppler wind analysis. Above an altitude of 50 km, the weakness of the backscattered solar spectrum (decreasing air density) is coupled with the low absorption crosssection of all atmospheric species in the spectral region up to 800 nm (where imaging photon detectors can be used), causing the along-the-track resolution (or error) to increase beyond values useful for operational purposes. Within the region of optimum performance (5 to 50 km), however, the technique is a valuable potential complement to existing wind measuring systems and can provide a low cost addition to powerful active (LIDAR) wind measuring systems now under development.

Rees, David↗

NASA NTRS1988

CAMELOT 2: Personnel transport between Earth and Mars

A summary of the second phase of a design study fo a cycling spacecraft for regular and frequency personnel transport between Earth and a Mars base is presented. The first-phase study, called project CAMELOT, was a mission analysis and configuration design and was completed by the Space Systems Design class at the University of Michigan in the winter term, 1987. In the second phase, the configuration and component design has been developed by the Space Systems Design class in the winter term, 1988, beyond the initial configuration study. Analysis has led to numerous design modifications and improvements, as well as providing more detailed system definition. Major components of the second phase study include innovative detailed designs such as an interface between the rotating and non-rotating portions of the spacecraft, an elevator system that changes orientation to eliminate Coriolis forces, an electromagnetic radiation shield that significantly reduces the mass of the spacecraft, and a detailed assembly sequence and cost analysis. In addition, modifications to the propulsion and the power generation subsystems, taxi-docking facilities, and internal layout design have led to a more efficient, more reliable, and more comfortable vehicle. Finite-element stress and dynamic analysis has verified much of the system and indicates the validity of the design. Computer simulation of many moving components, including torus rotation, elevator and interface operations, and attitude control mechanisms further validate and support the various systems.

Source record↗

NASA NTRS1921

The Employment of Airships for the Transport of Passengers

It was a conclusion of this detailed study of the practicality of using airships for carrying passengers that, although slow, airships are capable of carrying useful loads over long distances. However, it is noted that there is a certain limit to the advantages of large cubature. Beyond a certain point, the maximum altitude of the airship goes on decreasing, in spite of the fact that the range of action in the horizontal plane and the useful load go on increasing. The possibility of rapid climb is an essential factor of security in aerial navigation in the case of storms, as is velocity. To rise above and run ahead of storms are ways of avoiding them. However, high altitude and high speed are antithetical. This investigation concluded that a maximum velocity of 120 km/h is as far as we ought to go. This figure can only be exceeded by excessive reduction of the altitude of ceiling, range of flight, and useful load. The essential requisites of a public transport service are discussed, as are flight security, regularity of service, competition with other forms of passenger transportation, and the choice between rigid and semi-rigid airships.

Nobile, Umberto↗

NASA NTRS1936

Effect of changes in tail arrangement upon the spinning of a low-wing monoplane model

A series of tests was made in the N.A.C.A. free spinning tunnel to find the effect upon spinning characteristics of systematic changes in tail arrangement. The tests were made with a 1/16-scale made of a low-wing monoplane of modern design. The changes consisted of: (1) variation of the fuselage length; (2) variation of the fore-and-aft location of the vertical surfaces; and (3) variation of the vertical location of the horizontal surfaces. The spinning characteristics of the model, including the number of turns required for recovery, were found to vary systematically and regularly with systematic changes in the tail arrangement. The following changes in tail arrangement had harmful effects upon the recovery characteristics (which originally were excellent): (1) shortening the fuselage; (2) placing the vertical surfaces directly above the horizontal surfaces as compared with locations either fore or aft of this position; (3) moving the horizontal surfaces downward from their original location at the top of the fuselage.

Zimmerman, C H↗

NASA NTRS1935

Development of the NACA slot-lip aileron

An investigation of the undesirable delayed action, or lag, of the spoiler-type lateral control device led to the development of the NACA slot-lip aileron. The tests were made in the 7- by 10-foot wind tunnel with a 4- by 8-foot wing hinged at the tunnel jet boundary and taken of the motion of the control device under test and of the resulting wing motion. First, the lag, as affected by the fore-and-aft location of retractable ailerons or spoilers was determined. The lag was found to increase regularly as the spoiler was moved from the rear of the wing toward the front. Then a combination of spoilers and fixed slot was developed that, with the spoiler retracting into the forward part of the slot, reduced the time lag to a negligible value. In addition, an arrangement was developed using a hinged aileron-type flap as the upper portion, or lip, of a slot through the wing. This arrangement appears to be usable as a form of lateral control device that shows promise of giving improved control and stability at the high angles of attack through stall, with negligible lag, low control forces, and relatively simple construction.

Weick, Fred E↗

NASA NTRS1936

Wind-tunnel tests of wing flaps suitable for direct control of glide-path angle

Preliminary tests have been made for the purpose of obtaining a flap arrangement suitable for direct and immediate control of the steepness of the glide path of an airplane, a use for which present flaps are not satisfactory. An attempt has been made to develop a flap giving a reasonably high maximum lift coefficient with relatively low deflection and maintaining this value of the maximum lift coefficient with a large increase of deflection, the increase in deflection being accompanied by a large increase in drag. An arrangement was found that gave a maximum lift coefficient of approximately 1.90 for all flap deflections between 25 and 80 degrees, within which range the drag of the wing increased regularly to a large value.

Weick, Fred E↗

NASA NTRS1953

On the Development of Turbulent Wakes from Vortex Streets

Wake development behind circular cylinders at Reynolds numbers from 40 to 10,000 was investigated in a low-speed wind tunnel. Standard hotwire techniques were used to study the velocity fluctuations. The Reynolds number range of periodic vortex shedding is divided into two distinct subranges. At R = 40 to 150, called the stable range, regular vortex streets are formed and no turbulent motion is developed. The range R = 150 to 300 is a transition range to a regime called the irregular range, in which turbulent velocity fluctuations accompany the periodic formation of vortices. The turbulence is initiated by laminar-turbulent transition in the free layers which spring from the separation points on the cylinder. This transition first occurs in the range R = 150 to 300. Spectrum and statistical measurements were made to study the velocity fluctuations. In the stable range the vortices decay by viscous diffusion. In the irregular range the diffusion is turbulent and the wake becomes fully turbulent in 40 to 50 diameters downstream. It was found that in the stable range the vortex street has a periodic spanwise structure. The dependence of shedding frequency on velocity was successfully used to measure flow velocity. Measurements in the wake of a ring showed that an annular vortex street is developed.

FLOW, SUBSONIC↗