Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “raman”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Hierarchically structured MoO 2 /dopamine-derived carbon spheres as intercalation electrodes for lithium-ion batteries

A hydrogen peroxide initiated sol-gel process involving molybdenum transformation in the presence of dopamine (Dopa) hydrochloride excess produced the metastable precipitate composed of polydopamine (PDopa) spheres coated with Dopa preintercalated molybdenum oxide, (Dopa) x MoO y @PDopa. The hydrothermal treatment (HT) of the (Dopa) x MoO y @PDopa precursor resulted in the simultaneous carbonization of Dopa and molybdenum reduction generating MoO 2 nanoplatelets distributed and confined on the surface of the Dopa-derived carbon matrix (HT-MoO 2 /C). The consecutive annealing (An) of the HT-MoO 2 /C sample at 600 °C under Ar atmosphere led to the formation of MoO 2 with increased Mo oxidation state and improved structural stability (AnHT-MoO 2 /C). Annealing had also further facilitated interaction between the molybdenum-derived and Dopa-derived components resulting in the modification of the carbon matrix confirmed by Raman spectroscopy. Morphology of both materials is best described as Dopa-derived carbon spheres decorated with MoO 2 nanoplatelets. These integrated metal oxide and carbon structures were tested as electrodes for lithium-ion batteries in the potential window that corresponds to the intercalation mechanism of charge storage. The AnHT-MoO 2 /C electrode showed enhanced electrochemical activity, with an initial specific discharge capacity of 260 mAh/g and capacity retention of 67% after 50 cycles, compared to the HT-MoO 2 /C electrode which exhibited an initial specific discharge capacity of 235 mAh g –1 and capacity retention of 47% after 50 cycles. The rate capability experiments revealed that the capacity of 93 mAh/g and 120 mAh/g was delivered by the HT-MoO 2 /C and AnHT-MoO 2 /C electrodes, respectively, when the current density was increased to 100 mA/g. Here, the improved specific capacity, electrochemical stability, and rate capability achieved after annealing were attributed to higher crystallinity of MoO 2 , increased oxidation state of Mo, and formation of the tighter MoO 2 /carbon contact accompanied by the annealing assisted interaction between MoO 2 and Dopa-derived carbon.

25 ENERGY STORAGE↗
DOE OSTI2024

Integration of layered group IV selenides: From SnSe–SnSe 2-x S x core-shell crystals to complex (SnSe–SnSe 2-x S x )-GeSe van der waals heterostructures

The layered semiconductor tin selenide (SnSe) has received extensive interest due to its promising thermoelectric and ferroelectric properties. Integrating SnSe with other layered crystals in heterostructures can enable the modification of charge- and thermal transport, electrical polarization, and other properties such as chemical stability, optoelectronics, and photonics. Here, we demonstrate the vapor transport synthesis of single-crystalline SnSe monochalcogenide flakes that are spontaneously encapsulated in a thin layered SnSe 2-x S x dichalcogenide shell. In a second growth step, such SnSe-SnSe 2-x S x heterostructures are integrated with the monochalcogenide GeSe, which is laterally stitched to the SnSe side facets while preserving the dichalcogenide shell across the basal facets. This architecture is confirmed by optical microscopy, electron microscopy and diffraction, energy dispersive X-ray and Raman spectroscopies, as well as cathodoluminescence spectroscopy. Furthermore, the results extend our capabilities for materials integration by forming complex heterostructures with both vertical van der Waals interfaces and covalent lateral interfaces between layered semiconductors.

2D layered crystals↗
DOE OSTI2025

Direct observation of key aluminum hydroxide prenucleation oligomers for gibbsite nucleation and crystallization in sodium aluminate solution by liquid ToF-SIMS

The mechanism of gibbsite (aluminum hydroxide) crystallization from highly alkaline solutions such as Bayer liquors remains poorly understood, where aluminum (Al) transforms from largely tetrahedrally coordinated aluminate monomers in sodium aluminate solutions into a network of octahedra in gibbsite crystals. A variety of traditional analytical approaches applied to this system do not readily reveal the presence of higher-order oligomeric intermediates. To overcome this limitation, we employed in-situ liquid Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) to examine the Al species present in concentrated sodium aluminate solutions favoring crystallization of gibbsite or sodium aluminate. A complex mixture of Al oligomers was found. By comparing the change in the relative concentration of Al oligomers with +1 and -1 charge, we were able to identify three major Al oligomer candidates, iso-tetramers, iso-pentamers, and cyclic-hexamers, for the nucleation and crystallization of gibbsite. The concentrations of iso-tetramers and iso-pentamers significantly surpass those of cyclic-hexamers. Time-dependent in-situ Raman spectroscopy analysis indicated that the appearance of gibbsite coincided with the peak concentration of these oligomers. The Density-functional theory (DFT) calculation suggests that the formation of iso-oligomers is more favorable than that of cyclic-hexamers. The combined results suggest that iso-tetramers and iso-pentamers play the most substantial role in the nucleation and growth of gibbsite in the sodium aluminate solutions. Our findings also suggest that the oligomers that promote gibbsite crystallization are more stable in dilute sodium aluminate solutions, making these solutions particularly suitable for efficient gibbsite crystallization. In conclusion, our study fills a major knowledge gap in understanding Al speciation that leads to the nucleation and crystallization of gibbsite in concentrated sodium aluminate solutions.

Bayer liquor↗
DOE OSTI2021

Journal Pre-proof3D printed polylactic acid and acrylonitrile butadiene styrene fluidicstructures for biological applications: tailoring bio-material interfaceviasurface modification

Three-dimensional (3D) printing is a rapidly growing technology that best fits for cell culture and other biological applications due to its potential to build immensely complex structures from customized designs. However, use of 3D printed structures for cell adhesion, proliferation, and activation requires tailoring of surface characteristics. In this context, this work investigates the use of two biocompatible 3D printable polymer materials, Poly-L-lactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) for bio applications, and the effect of their post-printing surface modification processes to achieve desired bio functionality. Three post-printing surface modification techniques, alkaline hydrolysis, ultraviolet ozone plasma irradiation and gold thin film deposition are performed with the objective of introducing useful levels of surface functionalities. Poly-L-lysine (PLL) labelled with FITC chromophore is immobilized on the surface modified samples following standard protocols. The effect of surface roughness and porosity of the 3D printed structures on the polypeptide immobilization is compared on as-printed versus mechanically polished surfaces. Different characterization methods, viz., Fluorescence microscopy, Raman Spectroscopy and UV–vis spectroscopy, are used to study the efficacy of the surface modification and PLL immobilization techniques. Our results demonstrated denser PLL attachment on polished hydrolyzed PLA and ABS surfaces which enables the use of these printable polymers for a range of applications such as tissue scaffolds and microfluidics.

3D Printing, PLA, ABS, Biodegradable Polymer, Surf↗
DOE OSTI2025

Direct ink writing of shear exfoliated two-dimensional nanomaterial- elastomeric multifunctional nanocomposite

Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman analysis. Incorporating exfoliated graphene (40 wt%) increased viscosity by ∼6 orders of magnitude due to enhanced particle–matrix interactions, leading to pronounced yield stress behavior and a yield stress of approximately 1598 Pa, which enabled excellent shape retention during extrusion. Using the DIW technique, porous structures such as desalination membranes, self-sensing bone scaffolds, thermal management coating, and serpentine strain sensors were fabricated. When tested in a direct contact membrane distillation setup, the fabricated membrane demonstrated a promising permeate flux of 21.85 Lm −2 h −1 and a salt rejection of 74.3 %. The fabricated serpentine sensor exhibited stable signal variations under cyclic tensile loading, with a working range of 0–200 % strain and a maximum gauge factor of 43,735. A cell culture test using the printed bone scaffold demonstrated promising cell attachment and proliferation. The DIW printed hBN nanocomposite exhibited reversible shape change under heat, demonstrating potential 4D printing capability and efficient thermal management when exposed to high heat or flame.

Desalination↗
DOE OSTI2023

Superior photodynamic effect of single-walled carbon nanotubes in aprotic media: a kinetic study

It has been confirmed that single-walled carbon nanotubes (SWCNTs) could generate reactive oxygen species in aprotic media by utilizing photon energy. However, the impact of photon irradiation on SWCNTs and the kinetics of the generation process in aprotic media are still unclear, which significantly limits the yield performance. In this work, the kinetics for photodynamic effects has been investigated by performing characterizations on ultraviolet-treated SWCNTs using Raman spectroscopy, conductive atomic force microscope (in-situ), kelvin probe force microscope, and X-ray photoelectron spectroscopy. It is found that ultraviolet-treated SWCNTs are observed to have more defects, lower conductivity, and less surface charge after energy conversion. Starting from the fundamental intrinsic properties of SWCNTs, the kinetics and formation of these changes are thoroughly discussed. It turns out that the dispersion, chirality, and structural integrity of SWCNTs are important for achieving high-performance photodynamic effects, which are validated using several different SWCNTs as well as other carbon nanomaterials. A type of (6,5) s-SWCNTs exhibited the highest energy efficiency among a variety of other carbon nanomaterials. The yield rate is 2.15 mM/h, and the energy consumption is determined to be 2.79 W∙h/mM. This work is expected to help dramatically boost the energy efficiency of the photodynamic effect in aprotic media and pave the way for designing high-performance carbon nanomaterial-based photoinduced devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Macroscale superlubricity by a sacrificial carbon nanotube coating

Superlubricity, i.e., coefficient of friction (COF) below 0.01, was earlier limited to microscale in controlled environments in the earlier literature and more recently realized for macroscale sliding of ceramic or carbon surfaces lubricated by water or other polar fluids. However, there is lack of report of superlubricity for the most common bearing system, i.e., steel-steel contact in non-polar oil lubrication. Here, in this work, we present ultra-low COF of 0.001–0.007 by using a sacrificial coating composed of vertically-aligned carbon nanotubes (CNTs) for macroscale steel-steel sliding under minimum quantity lubrication (MQL) of a polyalphaolefin (PAO) oil in the ambient environment. Raman spectroscopy and electron microscopy analyses detected graphene-containing tribofilms on both the steel surfaces, which was produced by the fractured CNT flakes and metallic wear debris during running-in. The in situ formed graphene-graphene contact interface presumably possesses a low shear resistance leading to superlubricity. The presence of oil, despite as little as one droplet, has proven to be crucial. Such a superlubricity performance has shown good sustainability in extended testing of more than 500,000 cycles and strong ability of accommodating changes in sliding conditions. Results here demonstrate feasibility with fundamental insights for achieving ambient environment macroscale superlubricity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Pressure-induced superconductivity in a novel germanium allotrope

High-pressure studies on elements play an essential role in superconductivity research, with implications for both fundamental science and applications. Here we report the experimental discovery of surprisingly low pressure driving a novel germanium allotrope into a superconducting state in comparison to that for α-Ge. Raman measurements revealed structural phase transitions and possible electronic topological transitions under pressure up to 58 GPa. Based on pressure-dependent resistivity measurements, superconductivity was induced above 2 GPa and the maximum T c of 6.8 K was observed under 4.6 GPa. Interestingly, a superconductivity enhancement was discovered during decompression, indicating the possibility of maintaining pressure-induced superconductivity at ambient pressure with better superconducting performance. Density functional theory analysis further suggested that the electronic structure of Ge (oP32) is sensitive to its detailed geometry and revealed that disorder in the β-tin structure leads to a higher T c in comparison to the perfect β-tin Ge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Improved thermoelectric performance in Cr-doped two-dimensional Bi 2 Te 3

Thermoelectric materials with high electrical conductivity and low thermal conductivity (e.g., Bi 2 Te 3 ) can efficiently convert waste heat into electricity. However, despite favorable theoretical predictions, individual Bi 2 Te 3 nanostructures such as two-dimensional (2D) nanoplates tend to underperform bulk Bi 2 Te 3 . We report a novel surface doping technique to synthesize highly n-type Bi 2 Te 3 nanoplates using an external Cr coating followed by a thermal annealing process in a reducing atmosphere, as well as the mechanism by which this surface coating – only a few atoms or less in thickness – can observably impact the thermoelectric performance of 2D Bi 2 Te 3 . The Cr atoms act as n-type carrier donors by directly incorporating into the Bi 2 Te 3 structure during thermal annealing, enhancing electrical conductivity by ∼ 70 % while increasing thermal conductivity by only ∼ 5 % at room temperature. Compared to the uncoated Bi 2 Te 3 nanoplate, the Cr-doped Bi 2 Te 3 nanoplate exhibits a doubled thermoelectric figure of merit (zT), which is still relatively low. Raman spectroscopy and chemical potential simulations further confirm that Cr atoms are incorporated into the Bi 2 Te 3 structure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chalcogenide perovskite BaZrS 3 thin-film electronic and optoelectronic devices by low temperature processing

Owing to its superior visible light absorption and high chemical stability, chalcogenide perovskite barium zirconium sulfide (BaZrS 3 ) has attracted significant attention in the past few years as a potential alternative to hybrid halide perovskites for optoelectronics. However, the high processing temperatures of BaZrS 3 thin films at above 1000 °C severely limits their potential for device applications. Herein, we report the synthesis of BaZrS 3 thin films at temperatures as low as 500 °C, by changing the chemical reaction pathway. The single phase BaZrS 3 thin film was confirmed by X-ray diffraction and Raman spectroscopy. Atomic force microscopy and scanning electron microscopy show that crystalline size and surface roughness were consistently reduced with decreasing annealing temperature. The lower temperatures further eliminate sulfur vacancies and carbon contaminations associated with high temperature processing. The ability to synthesize chalcogenide perovskite thin films at lower temperatures removes a major hurdle for their device fabrication. The photodetectors demonstrate fast response and an on/off ratio of 80. Finally, the fabricated field effect transistors show an ambipolar behavior with electron and hole mobilities of 16.8 cm 2 /Vs and 2.6 cm 2 /Vs, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electronic properties of Ir 3 Li and ultra-nanocrystalline lithium superoxide formation

Current lithium-oxygen (Li-O 2 ) batteries suffer from large charge overpotentials related to electronic resistivity of the insulating lithium peroxide (Li 2 O 2 ) discharge product. One potential solution to this challenge is the stabilization of the lithium superoxide (LiO 2 ) discharge intermediate, which has much higher electronic conductivity compared to Li 2 O 2 . Cathodes based on small iridium (Ir) nanoparticles have been recently used in a LiO 2 battery to successfully stabilize the LiO 2 product, however, the LiO 2 had a short lifetime. In the previous study, researchers found that the LiO 2 was stabilized on Ir 3 Li surfaces which were formed from Ir nanoparticles during battery operation. Little is known about the electronic properties of Ir 3 Li and its role in stabilizing LiO 2 product formation. This work provides the first study of the electronic properties of Ir 3 Li, which was thermally synthesized in bulk prior to implementation on the reduced graphene oxide (rGO) cathode of a Li-O 2 cell. Here, the bulk Ir 3 Li was found to have comparable electrical conductivity to Ir metal, possess metal-like magnetic properties, and has an affinity towards O 2 adsorption. The LiO 2 discharge product formed from the Li-O 2 battery discharge was characterized using Raman spectroscopy, titration, along with a comprehensive transmission electron microscopy (TEM) study. This analysis revealed the formation of ultra-nanocrystalline LiO 2 particles greater than 200 nm. This result was attributed to the use of large micron sized Ir 3 Li particles, which could stabilize larger LiO 2 particles compared to previous cathodes that utilized Ir nanoparticles that partially converted to Ir 3 Li during cycling. These results demonstrate that cathode properties can be modified to stabilize the bulk LiO 2 discharge product, which can be useful for the further development of LiO 2 -based Li-O 2 batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Discovery of a new phase transition and high-valent redox mechanism in Fe-substituted Na 2 Mn 3 O 7

Sodium-ion batteries are a promising lower-cost alternative to lithium-ion batteries, but further improvements in electrochemical performance are required. One strategy to increase capacity is to enable reversible high-valent cationic and anionic redox in layered cathode materials; however, this is typically accompanied by structural degradation. Here, in this study, we elucidate the mechanism by which Fe-doped Na 2 Mn 3 O 7 , featuring ordered transition metal-vacancies, achieves reversible high-valent redox. Using Mössbauer spectroscopy, soft X-ray absorption spectroscopy (XAS), and in-situ hard XAS, we demonstrate reversible high-valent cationic redox involving both Fe and Mn while in-situ Raman confirms the absence of local structural degradation associated with oxygen redox. Combining in-situ X-ray diffraction with theoretical calculations, we further identify a previously unreported global phase transition from the $\bar{P1}$ to the $P2_1/c$ space group during electrochemical cycling and develop a physical model describing this structural evolution. These results provide insights for structurally stable layered sodium transition metal oxide cathodes with reversible high-valent redox.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Highly microporous Parinari Curatellifolia carbon nanomaterials for supercapacitors

High surface area nanostructured electrodes are essential for understanding charge storage mechanisms in high capacitance supercapacitors. Additionally, a growing number of studies provide credible evidence that the highest capacitance in carbon nanomaterials is attainable only when the pore size is in micropore range. In this study therefore, micropore-dominatedcarbon materials derived from Parinari curatellifolia (PC) waste seeds are prepared via pyrolysis and subsequent chemical activation with KOH. SEM, EDAX, TEM, Raman, and XRD studies show that the microstructure and composition of the as-prepared microporous carbon materials are influenced by adjusting the KOH to carbon mass ratio. Sorption studies demonstrate a very high BET surface area of 1898 m 2 g –1 , type I isotherm, and 99% micropore content in all the samples. The BET surface area, S micro , V micro , and total volume increased with increasing KOH content during activation. The fabricated electrodes exhibit high specific capacitances of 423 F g –1 at 5 mV s –1 and cyclic stability of 98% after 50000 cycles both of which are indicative of our carbon materials huge potential in making high performance supercapacitors. The specific capacitance increased with the micropore content in the samples signifying that the pores enhanced diffusion and hence the charge storage. The PC carbon materials deliver high specific capacitance due to the enhancement of diffusion and charge storage stemming from the synergetic interplay of the aforementioned textural parameters. As a result, the PC carbon materials therefore provide good prospects for supercapacitor applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Real-time monitoring of the orthohydrogen fraction in a liquid hydrogen moderator

Here, we present the first direct measurements of the orthohydrogen fraction in an operating liquid hydrogen moderator loop at a high-powered neutron source. We have developed a Raman immersion probe capable of characterizing the orthohydrogen and parahydrogen makeup of a liquid hydrogen loop approximately every ten seconds, which can see orthohydrogen fractions lower than 0.20 without difficulty. At the Spallation Neutron Source, where the time-averaged power deposition in the studied moderator system is around 0.02 W/cm 3 , the orthohydrogen fraction increases with beam power and equilibrates at levels of 0.40 and responds to beam trips in a dynamic fashion. Additionally, we find that without deliberate catalyst systems in place, the relaxation due to the piping in the system has insignificant effect in catalyzing the relaxation of freshly condensed hydrogen toward thermodynamic equilibrium, and that the radiation levels associated with activation in a non-operating spallation neutron source target-moderator-reflector assembly likewise has insignificant effect on the liquid hydrogen kinetics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

ROADRUNNER uranium nitride MiniFuel: Experimental design, fabrication and pre-irradiation baseline characterization for accelerated burnup testing

Uranium nitride (UN) is a promising fuel candidate for advanced reactor systems owing to its high uranium density and thermal conductivity; however, its qualification remains constrained by the scarcity of well-controlled irradiation performance data. Here, to address this limitation, the ROADRUNNER (Research On ADvancing the peRformance of UraNium Nitrides in Extreme enviRonments) campaign employs the MiniFuel platform in the High Flux Isotope Reactor (HFIR) to enable accelerated burnup irradiation testing under tightly controlled and largely isothermal conditions. This paper presents the experimental design, fuel fabrication, and pre-irradiation baseline characterization of the ROADRUNNER UN MiniFuel campaign. Thirty-six UN minidisc specimens were fabricated with systematically varied as-fabricated density (86–96% of theoretical density), carbon impurity content (961–5240 ppm), oxygen content (≤ ∼2000 ppm), and grain size (2.5–24 μm). The irradiation matrix spans nominal fuel temperatures of 873 K, 1173 K, and 1473 K and target burnups of 3.75%, 6.0%, and 7.5% fissions per initial metal atom (FIMA). Neutronic and thermal analyses were performed to define specimen-specific burnup accumulation and temperature histories, establishing the boundary conditions for subsequent in-pile behavior. Comprehensive pre-irradiation characterization—including dimensional metrology, density verification, impurity analysis, X-ray diffraction, Raman spectroscopy, scanning electron microscopy, X-ray computed tomography, and confocal profilometry—provides a detailed baseline for post-irradiation examination. Pre-irradiation data were further used to generate predictive estimates of fission gas release and swelling using existing empirical correlations. This quantitative comparison reveals substantial inter-model divergence at intermediate and elevated temperatures that exceeds propagated input uncertainties, highlighting structural gaps in the historical irradiation database. The ROADRUNNER irradiation campaign is currently underway in HFIR, with initial firs cycle completed in late 2025 and remaining targets scheduled through 2027. The experimental design and baseline dataset presented here establish the framework needed to interpret forthcoming post-irradiation measurements and to provide discriminating data for the validation and refinement of physics-based UN fuel performance models.

Lopes, Denise Adorno [Oak Ridge National Laborator↗
DOE OSTI2022

Anti-electrostatic hydrogen-bonded tellurate dimers captured and stabilized by crystallization of a bis-iminoguanidinium salt

Anionic Te 2 O 6 (OH) 4 4– dimers have been captured by crystallization of a hydrated salt of glyoxal-bis-iminoguanidinium (GBIG), and structurally characterized by single-crystal X-ray diffraction and vibrational spectroscopy. The crystal structure reveals anti-electrostatic hydrogen-bonded chains of Te 2 O 6 (OH) 4 4– dimers, consisting of edge-sharing TeO 6 octahedra, stabilized by hydrogen bonding from the GBIG cations and the water molecules included in the crystal. FTIR spectroscopy confirms the presence of TeO 6 octahedra with characteristic Te–O stretching modes at 755 cm -1 and 689 cm -1 , while the observed stretching mode at 3459 cm-1 confirms the presence of axially-bonded hydroxyl groups. Raman spectroscopy and DFT calculations confirm the presence of the Te 2 O 6 (OH) 4 4– dimers in the crystalline phase and of the TeO(OH) 5 – monomers in solution.

36 MATERIALS SCIENCE↗
DOE OSTI2025

To thread or not to thread: Reaction of uranyl (UO 2 2+ ) with two Aza-crown macrocycles

The complexation of the uranyl ion (UO 2 2+ ) by macrocyclic ligands is hindered by the rigidly enforced trans orientation of its oxo ligands. To further investigate this coordination chemistry challenge, here we investigate the reactivity of UO 2 2+ with two different 18-membered aza-crown macrocycles, diaza-dibenzo-18-crown-6 (DADBC) and 7,16-bis(N-methylacetamide)diaza-18-crown-6 (BAM). The reaction of uranyl triflate, [UO 2 (OTf) 2 (THF) 3 ], with DADBC in toluene afforded [UO 2 (DADBC)][OTf] 2 , in which the UO 2 2+ ion is fully encapsulated by the macrocycle. This conclusion was supported by NMR, UV–Vis, IR, and Raman spectroscopies, as well as single-crystal X-ray crystallography. Attempts to form the in-macrocycle complex of BAM, however, were unsuccessful. Here, the reaction of BAM with [UO 2 (OTf) 2 (THF) 3 ] in THF/CH 2 Cl 2 unexpectedly afforded crystals of [H 2 BAM][OTf] 2 , where the protons are derived from solvate water in the BAM crystal lattice.

Actinide↗
DOE OSTI2023

Porous potassium tantalate-reduced graphene oxide nano cube architecture for high performance hybrid supercapacitors

Energy storage has always been a major concern in the present-day situation. Advanced energy storage devices are batteries, supercapacitor and solar cells. However, advancements have been noteworthy in the field of high-performance hybrid supercapacitors. On this note, we have fabricated a hybrid supercapacitor electrode material Potassium tantalate nano cube (KT NCs) and its reduced graphene oxide composite (KT-rGO NCs) and tested its electrochemical performance. The materials showed high performances with specific capacitance of 565 F/g for KT NCs and 850 F/g for KT-rGO NCs respectively. Energy densities of both KT NCs & KT-rGO NCs are 28.24 Wh/Kg and 29.50 Wh/kg with good retention capacities. Further detailed study of both KT NCs and KT-rGO NCs are carried out with characterization techniques like XRD, FTIR, BET, Raman and HRTEM for structural analysis and electrochemical measurements to analyse various parameters pertaining to its charge storage capacity.

36 MATERIALS SCIENCE↗