Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Bond Line Thickness Estimation in Composite Structures Using Multiple Inspection Techniques

Imaging and other nondestructive evaluation techniques are commonly used for material characterization and defect recognition in safety critical aerospace applications, with data fusion providing the framework for uncertainty quantification in these contexts. Most commonly, forward physics-based modeling predicts the response conditioned on material properties and defect assumptions, and probabilistic methods are used to infer the hidden state of the subject of the inspection from a combination of prior information, likelihoods, and inspection data. In this paper Bayesian methods are used to estimate bond thickness in lap joints comprised of aluminum adherends using a combination of infrared thermography and ultrasound. The concept of the conflation of probability distributions is applied to combine the posterior distributions derived from thermography and ultrasound and the quality of the fused estimates are compared against the individual estimates against synthetic data that was created to mimic the inspection of a lap joint comprised of aluminum adherends.

thermal nondestructive evaluation↗

Bond Line Thickness Estimation in Composite Structures Using Multiple Inspection Techniques

Imaging and other nondestructive evaluation techniques are commonly used for material characterization and defect recognition in safety critical aerospace applications, with data fusion providing the framework for uncertainty quantification in these contexts. Most commonly, forward physics-based modeling predicts the response conditioned on material properties and defect assumptions, and probabilistic methods are used to infer the hidden state of subject of the inspection from a combination of prior information, likelihoods, and inspection data. In this paper Bayesian methods are used to estimate bond thickness in lap joints comprised of aluminum adherends using a combination of infrared thermography, digital radiography, and ultrasound. The accuracy of the fused estimates are validated against data generated from synthetic specimens, and by comparison against high resolution X-ray computed tomography inspections of built specimens.

thermal nondestructive evaluation↗

Lunar Resource Investigation With NASA's VIPER Mission

The VIPER mission will be NASA’s first mobile robotic lunar drilling and volatiles assessment mission bound for the lunar south pole. From a resources perspective, the data acquired through VIPER’s operation on the lunar surface will inform future Artemis missions. The VIPER mission will provide important geotechnical details as well as volatiles qualification and quantification. The VIPER mission instrumentation suite and the overall science mission objectives will be presented at the European Lunar Symposium 2024.

VIPER↗

Ultrashort Pulsed Laser Treatment: A Novel Sterilization Method for Planetary Protection

Introduction: On missions seeking signs of potential life elsewhere in the solar system, we have an obligation not to bring our own Earthly life with us. Reducing the bioburden (number of living microbes) on spacecraft is therefore required by the COSPAR Policy on Planetary Protection to target bodies that are of interest for understanding the origins of life (such as Mars). The method of spacecraft sterilization predominantly used by NASA is Heat Microbial Reduction, which is typically incompatible with heat-sensitive components such as optics and electronics, and is expensive and time-consuming. Here, we present preliminary results on a novel method for spacecraft hardware sterilization: high-intensity ultrashort (femtosecond) pulsed laser illumination. Femtosecond lasers use extremely high photon fluxes (10^29 photons/sec*cm^2, ~0.03 J/cm^2) in extremely short pulses, which can inactivate even stress-tolerant microbial spores with minimal damage to the spacecraft surface. This rapid sterilization technique could be carried out in situ in a spacecraft assembly clean room using high-speed surface scanning, saving critical time and resources. It also can potentially remove or reduce debris from inactivated cells and spores. Methods: To develop optimal laser processing parameters for inactivating planetary protection-relevant organisms on metal surfaces, we inoculated 1-cm^2 mirror-polished aluminum coupons with Bacillus subtilis spores (2x10^5 spores/coupon) and tested the effect of several parameters, including pulse count and fluence. Sterilization effectiveness was measured by recovering spores using a PVA (polyvinyl acetate) peel and conducting serial dilution and plating for colony-forming units (CFUs). Results: Our results show that pulse count and fluence both affect sterilization effectiveness and that within a certain pulse count range, increasing fluence increases effectiveness. We have demonstrated the ability to reduce viable microbial counts by at least 10^-4. Future work will include testing higher abundances and different species of microorganisms, effectiveness on complex surfaces, compatibility with sensitive surfaces, and quantification of cell debris removal. Femtosecond pulsed laser illumination has the potential to provide dramatic savings in both cost and schedule over current methods of bioburden reduction to prevent forward contamination. It may also have the potential for use in surface sterilization of returned samples to prevent back contamination.

Planetary Protection; Lasers; Sterilization; Bacil↗

Wire-break Ignition Testing of Materials for Spacesuit Fire Hazard Control

The input design constraints applied to the extravehicular activity (EVA) spacesuit pose a significant challenge for mitigation of fire hazards. To minimize fatigue and increase comfort of the crewmember operating the suit, the suit pressure is lowered below sea level conditions with typical EVA suit designs operating with 4.3 psia (29.7 kPa). With the lowered operating pressures and the use of closed-loop life support, the suit requires elevated concentrations of oxygen, typically >95%. At these oxygen concentrations, nearly the entirety of the suit internal materials are flammable. This leaves one remaining possible control leg of the fire triangle: ignition sources. Since the Gemini and Apollo programs, this has been a risk that has undergone constant reassessment, with a focus on improved mitigation. After the Apollo I fire, an arc ignition method was developed and used to quantify ignition thresholds for in-suit materials resulting in a current limit for powered in-suit devices applied to all subsequent suit designs. After the discovery of a frayed spacesuit biomed cable on STS-113 during the Shuttle Program, the previous arcing method was repeated with additional methods developed to extend the testing further. One of those methods was wire-break ignition testing, in which the current in a single strand of wire was progressively increased, preheating the material in proximity with a resultant break and the application of a reasonably repeatable arc to ignite the material, all while exposed in the selected environment. This method was used to test a suite of spacesuit materials providing relative performance with respect to ignition with this configuration for application of energy. This paper discusses extension of the current data set to address recent material additions, lowering of energy test levels for quantification of materials too low to measure in previous testing, as well as future plans to improve this method.

Colin Campbell↗

Integrating Forest Structural Diversity Measurement Into Ecological Research

The measurement of forest structure has evolved steadily due to advances in technology, methodology, and theory. Such advances have greatly increased our capacity to describe key forest structural elements and resulted in a range of measurement approaches from traditional analog tools such as measurement tapes to highly derived and computationally intensive methods such as advanced remote sensing tools (e.g., lidar, radar). This assortment of measurement approaches results in structural metrics unique to each method, with the caveat that metrics may be biased or constrained by the measurement approach taken. While forest structural diversity (FSD) metrics foster novel research opportunities, understanding how they are measured or derived, limitations of the measurement approach taken, as well as their biological interpretation is crucial for proper application. We review the measurement of forest structure and structural diversity—an umbrella term that includes quantification of the distribution of functional and biotic components of forests. We consider how and where these approaches can be used, the role of technology in measuring structure, how measurement impacts extend beyond research, and current limitations and potential opportunities for future research.

Jeff W. Atkins↗

Development of the Volatile Monitoring Oxygen Measurement System

Extracting resources from the Lunar Regolith for oxygen production is a primary focus for the NASA in-situ resource utilization technology developments for the Artemis missions. The need to identify, separate, and purify extracted resources continuously evolves around state-of-the-art technology research and development and will also enable more sustainable space human exploration. A research team at NASA’s Kennedy Space Center comprised of the Applied Chemistry Laboratory and the Granular Mechanics and Regolith Operations Laboratory have developed a versatile system able to focus on the extraction and quantification of oxygen. The system, Volatile Monitoring Oxygen Measurement System (VMOMS), can identify extracted oxygen from regolith processing technologies such as molten regolith electrolysis. The technology can quantify oxygen levels from a few parts per million, ppm, up to a 95% oxygen environment and detect other volatiles.

D. E. Essumang↗

Real Options Analysis for Valuation of Climate Adaptation Pathways With Application to Transit Infrastructure

Climate change and sea level rise (SLR) are expected to increase the frequency and intensity of coastal flood events, posing risks to coastal communities and infrastructure. While regional climate adaptation investments can provide substantive flood protection, existing plans often neglect uncertainty in future climate conditions and adaptation performance, consequently neglecting the option value of flexibly implementing proposed projects. Addressing this gap, we develop and employ a generalizable real options analysis (ROA) valuation framework that considers how uncertainty in adaptation project costs, SLR, flood severity, and flood losses inform the full range of adaptation performance outcomes. We further propose and apply a novel, computationally efficient flood loss sampling algorithm to estimate the consequences of randomly arriving coastal flood events. We apply this ROA framework to assess the option value of flexibly timing adaptation investments over time, investigating an adaptation pathway proposed by the City of Boston from the perspective of the regional transit system manager. Our results suggest that flexible implementation can provide significant option value in the near-to mid-term(>30 years), with highest option values under low-probability, high consequence scenarios. Our results also suggest adaptation pathway performance in the latter half of the 21stcenturyis most sensitive to uncertainty in sea level rise, flood loss estimates, and flood frequency, underscoring the importance of uncertainty quantification in the long-term valuation of adaptation investments.

Michael V. Martello↗

Laser Beam Welding for in-Space Joining Demonstrated Under Vacuum on the Ground and By Parabolic Flight Experiments

High energy density electron beam welding enabled the first and, to date, only American weld performed in space during the M551 experiment on Skylab in 1973. Though welding is critical to 90% of durable goods manufacturing in America, there is not yet regular and reliable application of welding processes to the In-space Servicing, Assembly, and Manufacturing (ISAM) sector. Fundamental studies are needed to develop basic capabilities and to enhance fundamental process knowledge, which will support follow-on efforts to mature in-space welding for use in commercial, defense, and other aerospace applications. The current work seeks to build on past flights and improve understanding and quantification of materials joining in space conditions using laser beam welding (LBW). LBW offers several advantages over the electron beam welding of Skylab, amongst others: reduced electromagnetic interference, less exposure of operators to ionizing radiation, and flexible delivery through optical fibers supporting unique workpieces and joints. Since there is no orbital laboratory to mature laser beam welding for space, the current effort addresses maturation of laser beam welding through parabolic flights augmented with data collection to enable numerical modeling efforts that capture the physical effects of the space environment. This team has retrofitted an LBW experimental apparatus that can simulate the vacuum and, during a parabolic flight, the reduced gravity & microgravity conditions of in-space welding. A team of Capstone students modified the setup, originally developed by NASA Langley Research Center for electron beam free-form fabrication, to replace its electron gun with a 1 kW, 1070 nm Yb fiber laser. The apparatus was further instrumented with temperature sensing and high-speed welding cameras to monitor and record changes in the thermal state of the workpiece, the melt pool, the laser penetration level, and the development and orientation of spatter & plumes. The system will operate autonomously, demonstrating its utility to uncrewed missions. During upcoming parabolic flight campaigns expected summer 2024, this LBW equipment will weld common aerospace alloys of aluminum, stainless steel, and titanium under conditions representative of the space environment. This data will guide future computational modeling efforts of laser welding in space and help to qualify in-space welding as a viable ISAM technique.

laser beam welding↗

A Preliminary Assessment of Step Effects on the BOLT Geometry in Mach 6 Flow

An infrared thermography measurement technique has been installed in the Langley Aerothermodynamic Laboratory. The system is calibrated for use with commercially available thermoplastics and ceramic materials, and to the surface temperature ranges when exposed to the facility hypersonic flow. Herein an uncertainty quantification is performed, revealing 5% surface temperature and 20% heat transfer uncertainty bands to two-sigma confidence. As a first application of the test measurement technique, an investigation was conducted to explore the correlation between the height of forward facing (FF) and rearward facing (RF) two-dimensional steps, free stream Reynolds number, and the onset of boundary layer transition from laminar to turbulent in Mach 6 flow on a 50% scale Boundary Layer Transition (BOLT) flight test vehicle geometry. Computational predictions were generated to identify potential x/L locations of transition onset for various flow conditions with a smooth outer mold line geometry and are compared to experimental results. The BOLT Step Test was conducted in the NASA Langley Aerothermodynamic Laboratory 20-inch Mach 6 wind tunnel at Reynolds numbers between 1.4 and 11.3 million conditions for various step heights. Data were collected using a developmental infrared thermography test technique and reduced to heat transfer for comparison with CFD solutions. This is a preliminary assessment of the developmental infrared thermography test technique used to acquire and reduce the experimental data. insight into the ongoing comparative analysis of the effects of FF and RF steps on boundary layer transition for the BOLT geometry in Mach 6 flow.

BOLT↗

Ground Risk Informed Operational Planning for Small Unmanned Aerial Systems

Increasing quantities of small Unmanned Aerial Systems (sUAS) operations present many challenges in terms of safe adoption and integration into existing airspace. The ability to study and quantify the risk to third parties on the ground prior to flight is an important step toward enabling Beyond Visual Line of Sight (BVLOS) operations. The Ground Risk Assessment Service Provider (GRASP) software is a capability developed by NASA to assist with third-party risk quantification and risk-informed flight planning. In this paper, two nominal flight paths intended to represent an infrastructure inspection mission are evaluated using the software to demonstrate its utility. A method is also introduced for adding other NASA-developed capabilities into a single architecture to assess a broader set of operational risks associated with BVLOS operations. These capabilities include a navigation system performance prediction tool, a high fidelity vehicle dynamics model, high resolution wind field data, and other information pertinent to operators. Data produced by these capabilities are combined to enable use of the Performance Based Navigation (PBN) concept borrowed from conventional aviation, providing quantified flight path uncertainty for where the sUAS is likely to be relative to its nominal flight plan. Ground risk is assessed within this region of uncertainty, giving a higher level of confidence in the solution compared to an analysis of only the nominal flight path.

Ground Risk↗

A Preliminary Assessment of Step Effects on the BOLT Geometry in Mach 6 Flow

An infrared thermography measurement technique has been installed in the Langley Aerothermodynamic Laboratory. The system is calibrated for use with commercially available thermoplastics and ceramic materials, and to the surface temperature ranges when exposed to the facility hypersonic flow. Herein an uncertainty quantification is performed, revealing 5% surface temperature and 20% heat transfer uncertainty bands to two-sigma confidence. As a first application of the test measurement technique, an investigation was conducted to explore the correlation between the height of forward facing (FF) and rearward facing (RF) two-dimensional steps, free stream Reynolds number, and the onset of boundary layer transition from laminar to turbulent in Mach 6 flow on a 50% scale Boundary Layer Transition (BOLT) flight test vehicle geometry. Computational predictions were generated to identify potential x/L locations of transition onset for various flow conditions with a smooth outer mold line geometry and are compared to experimental results. The BOLT Step Test was conducted in the NASA Langley Aerothermodynamic Laboratory 20-inch Mach 6 wind tunnel at Reynolds numbers between 1.4 and 11.3 million conditions for various step heights. Data were collected using a developmental infrared thermography test technique and reduced to heat transfer for comparison with CFD solutions. This is a preliminary assessment of the developmental infrared thermography test technique used to acquire and reduce the experimental data. insight into the ongoing comparative analysis of the effects of FF and RF steps on boundary layer transition for the BOLT geometry in Mach 6 flow.

BOLT↗

Openet: Applications of Satellite-Based Evapotranspiration Data for Water Resources Management in the Western United States

Advancing water security in overallocated river basins globally requires consistent and reproducible information on consumptive use of water that can anchor the development of data-driven solutions to the challenge of balancing water supply and demand. OpenET is a fully automated system for field-scale (30 m), satellite-based mapping of evapotranspiration (ET) at daily, monthly and annual timesteps. OpenET currently provides spatially contiguous data throughout the 23 westernmost states in the continental US, and includes both current information as well as multi-year timeseries of ET. The OpenET consortium has implemented an ensemble of satellite-based ET models (ALEXI/DisALEXI, eeMETRIC, PT-JPL, geeSEBAL, SIMS and SSEBop) on Google Earth Engine, which provides a shared computing platform for collaboration on processing of data from Landsat and other satellites, land cover and meteorological inputs, leading to increased consistency and accuracy across the ensemble of models. Earth Engine also facilitates hosting and distribution of data via open data collections and an application programming interface. We provide updates on the OpenET framework, open data services and data access tools, approach to geographic expansion, recent accuracy assessments, and describe how a user-driven design approach has facilitated successful applications of OpenET data for a wide range of water resource management activities. Applications to date include: use of ET data to improve quantification of ET and consumptive use in Oregon, Utah and the Upper Colorado River Basin; streamlining of water use reporting requirements in the California Delta; support for calculation of water budgets for the implementation of the Sustainable Groundwater Management Act in California; and integration into decision support tools for irrigation management. The use cases demonstrate how satellite-derived ET data that are easily accessed and seen as broadly accepted can accelerate adoption of innovative water management practices at scale, and support advances in the sustainability of water supplies. Uptake and use of data by the OpenET science community has also led to advances in our understanding of the impacts of landcover change, irrigation intensification and wildfire events on hydrology and the water security.

Applications↗

Human Spaceflight Applications of Novel Miniature X-Ray Technologies

INTRODUCTION: Radiography (XR) has long been a cornerstone of terrestrial medical imaging, though it has not yet been used in the spaceflight environment. Medical systems for human spaceflight missions are constrained by mass, volume, and power, and until recently, XR systems have been considered too large and power-consuming for spaceflight diagnostic and therapeutic applications. However, the rise of commercial spaceflight and NASA’s refocused efforts on returning crews to the Moon for long-duration missions have introduced a higher degree of medical risk to human spaceflight and require a re-evaluation when optimizing medical system design. Over the last decade, XR devices have miniaturized while maintaining good diagnostic and therapeutic sensitivity and specificity, making new in-flight medical and non-medical XR applications a possibility. Initial research identified several medical conditions where miniature XR would be beneficial for the diagnosis and/or management of medical conditions arising in space, though a more in-depth analysis is required to identify whether XR may add value to the management of such conditions. With this presentation, we aim to introduce the potential utility of miniature XR, review prior work highlighting where XR may be beneficial, and evaluate how miniature XR may reduce medical risk in human spaceflight missions. METHODS: IMPACT (Informing Mission Planning via Analysis of Complex Tradespaces) is a risk assessment tool developed by NASA to advance exploration mission medical system design by quantitatively estimating mission medical risk. IMPACT v1.0 includes a novel evidence library baselined to exploration environments, an expanded list of 119 medical conditions, medical capabilities and resources critical for management of these medical conditions, and the ability for rapid and iterative analysis in the setting of modifiable design reference missions (DRMs). Our first analysis identified which of the 119 medical conditions XR had diagnostic or therapeutic utility for. Subject matter experts (SMEs) recorded which XR views would be performed under ideal terrestrial circumstances for diagnosis/management of each condition, as well as which views are pragmatic for spaceflight limitations. A second analysis utilized IMPACT to identify significant conditions that contribute greatest to medical risk during a notional long-duration Lunar orbit and Lunar surface DRM. Medical system risk estimates include loss of crew life (LOCL), need for return to definitive care (RTDC; medical evacuation), and an estimate of crew task time affected (TTA). Using a standardized semi-quantitative scoring methodology, a deeper evaluation of each of the most significant medical conditions was performed. Data from both of these separate analyses were used to hypothesize what ideal and pragmatic XR studies may impact clinical management of the most significant conditions predicted to lead to medical risk. RESULTS: Approximately 1/3 of the IMPACT conditions were identified as being more effectively or comprehensively assessed or treated with the addition of miniature XR technology. The resulting conditions benefitting diagnostically and therapeutically from XR are revealed, as well as the ideal and pragmatic XR views and medical procedures benefitting from XR. The conditions of clinical significance and those most contributing to risk are also displayed. Among the conditions that contribute greatest to LOCL, four conditions for which XR may improve the diagnosis and management of include: decompression sickness, traumatic shock, dental abscess, and respiratory failure. Among conditions that contributed to RTDC, the evaluation and management of wrist fracture is likely improved by XR. For conditions leading to crew TTA, evaluation and management of EVA shoulder injuries, upper and lower extremity strains, back strains, and EVA hand injuries are likely improved by XR. DISCUSSION: Miniature XR in spaceflight has the potential to improve the evaluation and management of a substantial portion of conditions that most contribute to medical risk. This presentation is an introduction to the possibilities miniature XR provides for future human spaceflight missions and subsequent presenters will expand on potential applications in more detail. LEARNING OBJECTIVES: 1) Understand the previous limitations of using radiography in the management of spaceflight medical conditions; 2) Evaluate the findings from the IMPACT tool analysis, which allows quantification of the benefit miniature XR could provide for managing high-risk medical conditions in long-duration lunar orbit and surface missions, focusing on improvements in crew health outcomes; 3) Analyze case studies where miniature XR technology could reduce the medical risks associated with spaceflight missions, specifically in diagnosing and managing conditions such as decompression sickness, traumatic shock, and EVA-related injuries.

A Anderson↗

Soyuz Landing Risk Characterization

INTRODUCTION United States On-orbit Segment (USOS) astronauts have been returning to Earth from the International Space Station (ISS) aboard the Russian Soyuz vehicle since 2003. The energetics associated with Soyuz landings are comparable to our next generation of US space vehicles (Orion, Crew Dragon, and Starliner). Soyuz also lands crew in a similar state of spaceflight deconditioning that is anticipated using the future vehicles. A number of injuries have now been observed during these Soyuz landings. Currently it is unknown how Soyuz landing accelerations and the numbers and types of associated injuries relate to the new occupant protection requirements levied upon future space vehicles. Understanding this relationship will allow better quantification of the risk of injury for future spacecraft designs. METHODS An estimate of injury occurrence during Soyuz landings has been determined using data contained in NASA flight medicine databases and supplemented with data collected from crewmembers and flight surgeons. At the time of this abstract, 96 USOS astronauts have returned to Earth in the Soyuz (59 US, 31 International Partner, and 6 spaceflight participants). Of that total, data from 80 individual crew landings has been collected through this study as of September 2023. Injuries are classified either as contusions/abrasions, Class I (minor, no medical follow-up), Class II (moderate, medical follow-up necessary), Class III (severe), or Class IV (life threatening). Current NASA occupant protection standards are primarily based on the Multi-axial Dynamic Response Index (MDRI), which is a simple lumped-parameter spring, mass, damper model tuned to human impact responses in three orthogonal axes. RESULTS Using what is known about Soyuz landing dynamics from airborne and drop test data, the MDRI predicts essentially no Class IV or III injuries, < 1% Class II injuries, and < 5% Class I injuries. Approximately one-third of all USOS crewmembers for whom data has been gathered have suffered some sort of injury related to landing in the Soyuz vehicle. Most of these injuries fall into the contusion/abrasion category (21.3 %) (n.b. This is the percent for whom contusion/abrasion was the worst injury. Those with class I or II injuries typically also received contusions/abrasions). Class I injuries have been sustained by 5.0% of all crew, and Class II injuries have been observed in 3.8%. No Class III or IV injuries have been sustained to date. Forty-three injuries have been documented, with some crewmembers sustaining more than one injury in a single landing. The knee was the most likely area of injury (n=9), followed by the back (n=8), then the arm (n=7). CONCLUSION Soyuz landing dynamics are the most comparable analog environment for the anticipated loads associated with Orion and commercial crew vehicle landings. The MDRI under predicts the percentage of Class II injuries experienced during Soyuz landings, but it is better at predicting Class I injury occurrences. However, if contusions/abrasions are included in the minor injury Class I category, then the MDRI vastly under predicts those injuries as well. Given this data, it is important to re-evaluate the expected injury rates for future vehicles and work toward improving the predictive tools for spaceflight use. Spaceflight deconditioning may account for some of the under prediction, and work is ongoing to assess the relationship between landing injuries and impact tolerance changes due to spaceflight deconditioning. Future work includes expanding this study to involve private space missions on new vehicles to better characterize the effects of time in flight, suit and seat design, and vehicle dynamics.

P Greenhalgh↗

Deducing Land-Atmosphere Coupling Regimes from SMAP Soil Moisture

In recent years, there has been a growing recognition of the significance of Land-Atmosphere (L-A) interactions and feedback mechanisms in understanding and predicting Earth’s water and energy cycles. Soil moisture plays a critical role in mediating the strength of L-A interactions and is important for understanding the complex and governing processes across this interface. This study aims to identify the significance of soil moisture in identifying L-A coupling strength within the Convective Triggering Potential (CTP) and Humidity Index (HI) framework. To address this, a consistent and reliable dataset of atmospheric profiles is created by merging CTP and HI using Triple Collocation (TC) with three reanalysis datasets. The merged CTP and HI product demonstrates enhanced performance globally as compared to the individual datasets when validated with radiosonde and satellite observations. This merged product of CTP and HI is then used to compare the L-A coupling strength based on Soil Moisture Active Passive Level 3 (SMAPL3) and SMAP Level 4 (SMAPL4) over two decades (2003-2022) where L-A coupling strength is defined as the persistence probability within the dry and wet coupling regimes. Results indicate that the persistency-based coupling strength is related to the ability of soil moisture to predict future atmospheric humidity and dry vs. wet coupling state. The coupling strength in SMAPL4 is consistently stronger than in SMAPL3 and is likely due to its reliance on a land surface model and reduced susceptibility to random noise. The difference in coupling strength based on the same CTP-HI underscores the importance of soil moisture data in estimating coupling strength within the CTP-HI framework. These findings lay the groundwork for understanding the role of L-A interactions and drought evolution due to soil moisture variations, by providing insight into the quantification of coupling strength and its role in drought monitoring and forecast efforts.

Land-atmosphere coupling↗

Reconstruction of Thermal Protection System Aeroheating using a Green’s Function Approach

Inverse heat transfer (IHT) techniques are often used to reconstruct the surface heating conditions on spacecraft thermal protection systems (TPS) during atmospheric entry. Current IHT techniques for entry spacecraft applications, however, demand substantial computational resources, and are impractical for analyses such as uncertainty quantification and real-time health monitoring. In this paper, a Green’s function sensor fusion approach is used to reconstruct the TPS surface aeroheating conditions on experimental spaceflight and ground test systems from collocated temperature and heat flux sensors embedded in the TPS. The algorithm leverages Green’s functions to model the heat conduction within the spacecraft TPS and stabilizes the recovery of the surface heating condition using the direct heat flux sensor measurement. The algorithm is validated using arc-jet ground test data and applied to the reconstruction of the Mars 2020 backshell heating during Martian atmospheric entry. The performance of the algorithm is benchmarked against a current state-of-the-art IHT framework, FIAT_Opt. The Green’s function-based reconstruction algorithm recovers the net hot-wall heat flux absorbed by the TPS and the incident heat flux from the atmospheric entry environment in close agreement with FIAT_Opt. Notably, computation of the surface heating condition is completed in three orders of magnitude less time with the Green’s function sensor fusion approach using a consumer-grade PC, versus with FIAT_Opt running on a high performance computer cluster. The efficiency of the algorithm is leveraged to compute the uncertainty contributions of input parameters to the total uncertainty in reconstructed Mars 2020 backshell heating for the full atmospheric entry heat pulse. The sensitivity analysis uncovers that, at different times throughout the entry heat pulse, uncertainties in the TPS specific heat, thermal conductivity, and emissivity are all dominant drivers of the reconstruction uncertainty. These results demonstrate Green’s functions and sensor-fusion techniques as promising IHT approaches to reconstruct atmospheric entry environments from TPS-embedded measurements, and highlight how these techniques may give access to post-flight analyses previously hindered by the prohibitive cost of current methods.

Kenneth McAfee↗

Design Under Uncertainty with Design-Dependent Uncertain Variables

Uncertainty quantification (UQ) can provide a more robust understanding of a system, leading to better informed decisions earlier in the design process. The additional information that UQ provides can be leveraged during a design optimization process known as design under uncertainty that, when incorporated with multidisciplinary design and optimization, can become computationally infeasible due to the large number of responses required for meaningful results. Previous work addressed reducing the computational expense in design under uncertainty by incorporating analytic derivatives throughout polynomial chaos expansion. Although this allows design under uncertainty to be feasible for more systems, some multidisciplinary systems have design-dependent uncertain variables. This paper details an implementation of design dependent uncertain variables in a manner than preserves derivatives required for efficient gradient-based optimization throughout the process. Two analytic examples of design-dependent uncertain variables are given: the first transforms a uniform uncertain variable with one design variable and the second transforms a normal uncertain variable with two design variables. The polynomial chaos expansion (PCE) results are comparable to both the Monte Carlo (MC) results and the analytic results for the two examples. A case study that maximizes the lift-to-drag ratio with a design-dependence between the wing leading edge sweep angle and uncertain parameter percentage of laminar flow is compared to a MC and alternative optimization formulations. This paper demonstrates that design-dependent uncertain variables are valid and hold throughout PCE.

Joanna N Schmidt↗