Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “point defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Interplay between mass-impurity and vacancy phonon scattering effects on the thermal conductivity of doped cadmium oxide

Understanding the impact and complex interaction of thermal carrier scattering centers in functional oxide systems is critical to their progress and application. In this work, we study the interplay among electron and phonon thermal transport, mass-impurity scattering, and phonon-vacancy interactions on the thermal conductivity of cadmium oxide. We use time domain thermoreflectance to measure the thermal conductivity of a set of CdO thin films doped with Dy up to the saturation limit. Using measurements at room temperature and 80 K, our results suggest that the enhancement in thermal conductivity at low Dy concentrations is dominated by an increase in the electron mobility due to a decrease in oxygen vacancy concentration. Furthermore, we find that at intermediate doping concentrations, the subsequent decrease in thermal conductivity can be ascribed to a large reduction in phononic thermal transport due to both point defect and cation-vacancy scattering. With these results, we gain insight into the complex dynamics driving phonon scattering and resulting thermal transport in functional oxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elemental intermixing within an ultrathin SrRuO{sub 3} electrode layer in epitaxial heterostructure BaTiO{sub 3}/SrRuO{sub 3}/SrTiO{sub 3}

Aberration corrected scanning transmission electron microscopy is used to directly observe atom columns in an epitaxial BaTiO{sub 3} thin film deposited on a 3.6 nm-thick SrRuO{sub 3} electrode layer above an SrTiO{sub 3} (001) substrate. Compositional gradients across the heterointerfaces were examined using electron energy-loss spectroscopy techniques. It was found that a small amount of Ba and Ti had diffused into the SrRuO{sub 3} layer, and that this layer contained a non-negligible concentration of oxygen vacancies. Such point defects are expected to degrade the electrode’s electronic conductivity drastically, resulting in a much longer screening length. This may explain the discrepancy between experimental measurements and theoretical estimates of the ferroelectric critical thickness of a BaTiO{sub 3} ferroelectric barrier sandwiched between metallic SrRuO{sub 3} electrodes, since theoretical calculations generally assume ideal (stoichiometric) perovskite SrRuO{sub 3}.

36 MATERIALS SCIENCE↗

Features of primary damage by high energy displacement cascades in concentrated Ni-based alloys

Alloying of Ni with Fe or Co reduces primary damage production under ion irradiation. Similar results have been obtained from classical molecular dynamics simulations of 1, 10, 20, and 40 keV collision cascades in Ni, NiFe, and NiCo. In all cases, a mix of imperfect stacking fault tetrahedra, faulted loops with a 1/3 {111} Burgers vector, and glissile interstitial loops with a 1/2 {110} Burgers vector were formed, along with small sessile point defect complexes and clusters. Primary damage reduction occurs by three mechanisms. First, Ni-Co, Ni-Fe, Co-Co, and Fe-Fe short-distance repulsive interactions are stiffer than Ni-Ni interactions, which lead to a decrease in damage formation during the transition from the supersonic ballistic regime to the sonic regime. This largely controls final defect production. Second, alloying decreases thermal conductivity, leading to a longer thermal spike lifetime. The associated annealing reduces final damage production. These two mechanisms are especially important at cascades energies less than 40 keV. Third, at the higher energies, the production of large defect clusters by subcascades is inhibited in the alloys. A number of challenges and limitations pertaining to predictive atomistic modeling of alloys under high-energy particle irradiation are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optical studies of the uniaxial stress-induced orbital alignment of the Cr{sup 2+} centers in KZnF{sub 3} single crystal

Observation of an intense optical linear dichroism arising in cubic KZnF{sub 3}:Cr crystal at low temperatures under uniaxial stress applied along the four-fold axis is reported. Dichroism occurs in the range of the wide vibronic absorption band corresponding to {sup 5}E{sub g} → {sup 5}T{sub 2g} transition of the Cr{sup 2+} ions. Strain dependences of the dichroism value were studied at the temperatures of 2.0 K, 4.2 K, and 77 K. We associate our observations with the Jahn-Teller effect in the {sup 5}E{sub g} ground state of the Cr{sup 2+} ion. The model is proposed based on a redistribution of the centers between the minima of the E⨂e problem adiabatic potential that become inequivalent under uniaxial stress applied along the four-fold axis of the crystal. It is shown that random strains in the sample have to be taken into account to achieve the quantitative agreement of the model predictions with experimental data. It is found that random strains in the studied sample originate predominantly from point defects. Obtained parameter values are inversion splitting δ = 9.2 ± 1.6 cm{sup −1}, electron-strain coupling constant qV{sub ES} = 16 500 ± 600 cm{sup −1}, width of the random strain distribution w = (6.9 ± 0.5) ⋅ 10{sup −5}. It is shown also that the minima of the [CrF{sub 6}]{sup 4−} cluster adiabatic potential correspond to the elongated along the four-fold axes configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatial luminescence imaging of dopant incorporation in CdTe Films

State-of-the-art cathodoluminescence (CL) spectrum imaging with spectrum-per-pixel CL emission mapping is applied to spatially profile how dopant elements are incorporated into Cadmium telluride (CdTe). Emission spectra and intensity monitor the spatial distribution of additional charge carriers through characteristic variations in the CL emission based on computational modeling. Our results show that grain boundaries play a role in incorporating dopants in CdTe exposed to copper, phosphorus, and intrinsic point defects in CdTe. Furthermore, the image analysis provides critical, unique feedback to understand dopant incorporation and activation in the inhomogeneous CdTe material, which has struggled to reach high levels of hole density.

14 SOLAR ENERGY↗

Sb-induced strain fluctuations in a strained layer superlattice of InAs/InAsSb

Here, we show that Sb substitution for As in a MBE grown InAs/InAsSb strained layer superlattice (SLS) is accompanied by significant strain fluctuations. The SLS was observed using scanning transmission electron microscopy along the [100] zone axis where the cation and anion atomic columns are separately resolved. Strain analysis based on atomic column positions reveals asymmetrical transitions in the strain profile across the SLS interfaces. The averaged strain profile is quantitatively fitted to the segregation model, which yields a distribution of Sb in agreement with our scanning tunneling microscopy result. The subtraction of the calculated strain reveals an increase in strain fluctuations with the Sb concentration, as well as isolated regions with large strain deviations extending spatially over ~1 nm, which suggest the presence of point defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Doping properties of cadmium-rich arsenic-doped CdTe single crystals: Evidence of metastable AX behavior

Cd-rich composition and group-V element doping are of interest for simultaneously maximizing the hole concentration and minority carrier lifetime in CdTe, but the critical details concerning point defects are not yet fully established. Herein, we report on the properties of arsenic doped CdTe single crystals grown from Cd solvent by the travelling heater method. The photoluminescence spectra and activation energy of 74 +/- 2 meV derived from the temperature-dependent Hall effect are consistent with AsTe as the dominant acceptor. Doping in the 10^16 to 10^17/cm^3 range is achieved for measured As concentrations between 10^16 and 10^20/cm^3 with the highest doping efficiency of 40% occurring near 10^17 As/cm^3. We observe persistent photoconductivity, a hallmark of light-induced metastable configuration changes consistent with AX behavior. Additionally, quenching experiments reveal at least two mechanisms of increased p-type doping in the dark, one decaying over 2-3 weeks and the other persisting for at least 2 months. These results provide essential insights for the application of As-doped CdTe in thin film solar cells.

14 SOLAR ENERGY↗

Initial stages of ion beam-induced phase transformations in Gd 2 O 3 and Lu 2 O 3

The atomic-scale evolution of lanthanide sesquioxides Gd 2 O 3 and Lu 2 O 3 irradiated with 1 MeV Kr ions at room temperature and 120 K, up to fluences of 1x 10 16 ions/cm 2 (~20 dpa), has been characterized by in situ transmission electron microscopy. At room temperature, both oxides exhibited high radiation tolerance. Irradiation did not cause any observable structural change in either material, likely due to the mobility of irradiation-induced point defects, causing efficient defect annihilation. For Gd 2 O 3 , having the larger cation ionic radius of the two materials, an irradiation-induced stacking fault structure appeared at low fluences in the low temperature irradiation. As compared with the cubic-to-monoclinic phase transformations known to result from higher energy (~GeV) ion irradiation, Kr ions of lower energies (~MeV) yield much lower rates of damage accumulation and thus less extensive structural modification. Finally, at a fluence of 2.5 x 10 15 ions/cm 2 , only the initial stages of the cubic-to-monoclinic (C to B) phase transformation process, consisting of the formation and aggregation of defects, have been observed.

36 MATERIALS SCIENCE↗

Research Update: Emerging chalcostibite absorbers for thin-film solar cells

Copper antimony chalcogenides CuSbCh 2 (Ch=S, Se) are an emerging family of absorbers studied for thin-film solar cells. These non-toxic and Earth-abundant materials show a layered low-dimensional chalcostibite crystal structure, leading to interesting optoelectronic properties for applications in photovoltaic (PV) devices. This research update describes the CuSbCh 2 crystallographic structures, synthesis methods, competing phases, band structures, optoelectronic properties, point defects, carrier dynamics, and interface band offsets, based on experimental and theoretical data. Correlations between these absorber properties and PV device performance are discussed, and opportunities for further increase in the efficiency of the chalcostibite PV devices are highlighted.

14 SOLAR ENERGY↗

High p-type doping, mobility, and photocarrier lifetime in arsenic-doped CdTe single crystals

Here, Group-V element doping is promising for simultaneously maximizing the hole concentration and minority carrier lifetime in CdTe for thin film solar cells, but there are roadblocks concerning point defects including the possibility of self-compensation by AX metastability. Herein, we report on doping, lifetime, and mobility of CdTe single crystals doped with As between 10 16 and 10 20 cm –3 grown from the Cd solvent by the travelling heater method. Evidence consistent with AX instability as a major contributor to compensation in samples doped below 10 17 cm –3 is presented, while for higher-doped samples, precipitation of a second phase on planar structural defects is also observed and may explain spatial variation in properties such as lifetime. Rapid cooling after crystal growth increases doping efficiency and mobility for times up to 20–30 days at room temperature with the highest efficiencies observed close to 45% and a hole mobility of 70 cm 2 /Vs at room temperature. A doping limit in the low 10 17 /cm 3 range is observed for samples quenched at 200–300 °C/h. Bulk minority carrier lifetimes exceeding 20 ns are observed for samples doped near 10 16 cm –3 relaxed in the dark and for unintentionally doped samples, while a lifetime of nearly 5 ns is observed for 10 18 cm –3 As doping. These results help us to establish limits on properties expected for group-V doped CdTe polycrystalline thin films for use in photovoltaics.

14 SOLAR ENERGY↗

Time and frequency dependent mechanical properties of LaCoO 3 -based perovskites: Neutron diffraction and domain mobility

The study of domain wall movement and texture formation in ferroelastic LaCoO 3 perovskite under constant applied compressive stress has been performed using in situ neutron diffraction. Additionally, it was established that under constant applied compressive stress the domain walls show mobility that may lead both to the shrinkage (creep strain) and to the expansion (negative creep strain) of LaCoO 3 perovskite. The domain wall movement and texture formation can be explained by the availability, mobility, and interaction of twins, stacking faults, antiphase boundaries, dislocations, and point defects, such as oxygen vacancies and their complexes as well as impurity atoms. Lastly, the equation of motion was used to describe the possible mechanisms of domain wall movement under applied stress, and it was determined that the available solutions of this equation allow both for the shrinkage (creep strain) and for the expansion (negative creep strain) of LaCoO 3 perovskite to occur.

36 MATERIALS SCIENCE↗

Thermal conductivity of GaN single crystals: Influence of impurities incorporated in different growth processes

The thermal conductivity of GaN crystals grown by different techniques is analyzed using the 3ω method in the temperature range of 30 K to 295 K. GaN wafers grown by the ammonothermal method show a significant variation in thermal conductivity at room temperature with values ranging between 164 W m -1 K -1 and 196 W m -1 K -1 . GaN crystals produced with the sodium flux and hydride vapor phase epitaxy methods show results of 211 W m -1 K -1 and 224 W m -1 K -1 , respectively, at room temperature. Analysis using secondary ion mass spectrometry indicates varying amounts of impurities between the respective crystals and explains the behavior of thermal conductivity trends in the samples. The observed difference between thermal conductivity curves suggests that scattering of phonons at point defects dominates the thermal conductivity of GaN within the investigated temperature range. Finally, deviations of model curves from thermal conductivity measurements and disparities between modelled characteristic lengths and actual sample thicknesses indicate that phonon resonances are active in GaN.

36 MATERIALS SCIENCE↗

Locally defined quantum emission from epitaxial few-layer tungsten diselenide

Recently, single photons have been observed emanating from point defects in two-dimensional (2D) materials including WSe 2 , WS 2 , hexagonal-BN, and GaSe, with their energy residing in the direct electronic bandgap. Here, we report single photon emission from a nominal weakly emitting indirect bandgap 2D material through deterministic strain induced localization. A method is demonstrated to create highly spatially localized and spectrally well-separated defect emission sites in the 750–800 nm regime in a continuous epitaxial film of few-layer WSe 2 synthesized by a multistep diffusion-mediated gas source chemical vapor deposition technique. To separate the effects of mechanical strain from the substrate or dielectric-environment induced changes in the electronic structure, we created arrays of large isotropically etched ultrasharp silicon dioxide tips with spatial dimensions on the order of 10 μm. We use bending based on the small radius of these tips—on the order of 4 nm—to impart electronic localization effects through morphology alone, as the WSe 2 film experiences a uniform SiO 2 dielectric environment in the device geometry chosen for this investigation. When the continuous WSe 2 film was transferred onto an array of SiO 2 tips, an ~87% yield of localized emission sites on the tips was observed. The outcomes of this report provide fundamental guidelines for the integration of beyond-lab-scale quantum materials into photonic device architectures for all-optical quantum information applications.

36 MATERIALS SCIENCE↗

Alignment of morphology during high spatial frequency periodic structure formation in GaAs

The interaction among multiple intense ultrashort laser pulses and solids is known to provide a regular nanoscale surface corrugation. A coupled mechanism has been identified that operates in a specific range of fluences in GaAs that exhibits transient loss of the imaginary part of the dielectric function and Χ 2 , which produces a unique corrugation known as high spatial frequency laser induced periodic surface structures (HSFL). The final structures have 180 nm periods, and their alignment perpendicular to the laser polarization is first observed in an intermediate morphology with correlation distances of 150±40 nm. Quantum molecular dynamics simulations suggest that HSFL self-assembly is initiated when the intense laser field softens the interatomic binding potential, which leads to an ultrafast generation of point defects. The morphological evolution begins as self-interstitial diffusion, driven by stress relaxation, to the surface producing 1–2 nm tall islands. An ab initio calculation of excited electron concentration combined with a Drude-Lorentz model of the excited GaAs dielectric function is used to determine that the conditions for SPP coupling at HSFL formation fluences are both satisfied and occur at wavelengths that are imprinted into the observed surface morphologies. The evolution of these morphologies is reported on as the interplay between surface plasmon polaritons that localize defect generation within the structures present on the previous laser exposure and stress relaxation driven defect diffusion.

36 MATERIALS SCIENCE↗

Impact of high-dose gamma-ray irradiation on electrical characteristics of N-polar and Ga-polar GaN p–n diodes

We investigate the impact of high-dose gamma-ray irradiation on the electrical performance of Ga-polar and N-polar GaN-based p-n diodes grown by metalorganic chemical vapor deposition. We compare the current density-voltage (J-V), capacitance-voltage (C-V), and circular transfer length method (CTLM) characteristics of the p-n diodes fabricated on Ga-polar and N-polar orientations before and after irradiation. The relative turn-on voltage increases for the Ga-polar diodes with increasing irradiation dose, while it increases initially and then starts to decrease for the N-polar diodes. The p-contact total resistance increases for Ga-polar and decreases for N-polar samples, which we attribute to the formation of point defects and additional Mg activation after irradiation. The J-V characteristics of most of the tested diodes recovered over time, suggesting the changes in the J-V characteristics are temporary and potentially due to metastable occupancy of traps after irradiation. X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) measurements reveal the existence of different types of initial defects and surface electronic states on Ga-polar and N-polar samples. Gallium vacancies (V Ga ) are dominant defects in Ga-polar samples, while nitrogen vacancies (V N ) are dominant in N-polar samples. The presence of a higher concentration of surface states on Ga-polar surfaces compared to N-polar was confirmed by calculating the band bending and the corresponding screening effect due to opposite polarization bound charge and ionized acceptors at the surface. The difference in surface stoichiometry in these two orientations is responsible for the different behavior in electrical characteristics after gamma-ray interactions.

36 MATERIALS SCIENCE↗

Spatially resolved photoluminescence brightening in individual single-walled carbon nanotubes

Single-molecule microscopy was used to image photoluminescence (PL) brightening of individual sodium-dodecyl-sulfate (SDS)-wrapped single-walled carbon nanotubes (SWCNTs) upon the addition of dithiothreitol (DTT). PL enhancement varied for each nanotube (NT), with some brightening by 16% and others by a factor of about 7. Interestingly, NTs that displayed lower initial QY values showed the largest increases in PL enhancement. SDS-SWCNTs longer than the diffraction limit were studied in order to spatially resolve the brightening phenomenon. Quite unexpectedly, a uniform, single-step PL brightening along the NT was consistently observed, suggesting that the PL enhancement is the result of a non-localized process. Furthermore, the even PL brightening seen over SWCNTs that are micrometers long implies that single point defect sites, which are known to be largely responsible for exciton nonradiative decay, play no significant role in the brightening process. Interestingly, affixing the SWCNT strongly to the substrate surface mitigated the PL brightening response, consistent with a hypothesis that surfactant reorganization upon the addition of DTT is responsible for exciton PL brightening.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A strain-driven thermotropic phase boundary in BaTiO 3 at room temperature by cycling compression

In BaTiO 3 single crystals, we observed a strain-driven phase transition from the tetragonal phase to the tetragonal-orthorhombic phase boundary which can be introduced by slow cycling compressions (a loading of up to 0.5 GPa, strain rate of 10 -4 s -1 , and 100 cycles) at room temperature. Different from the well-known tetragonal to cubic phase transition under stress (~2 GPa), it only takes place locally around bent 90° domain walls. The inhomogeneous local stress and electrical fields as well as the mobile point defect pinning effect contribute to the phase re-entrance. Through comparison experiments by in situ synchrotron x-ray diffraction, Raman scattering, and (scanning) transmission electron microscopy, we explored the phase transition mechanism. Based on that, we developed a mechanical method to obtain well-stabilized high-density thermotropic phase boundary structures (with tetragonal, orthorhombic, and bridging monoclinic phases) in BaTiO 3 for potential applications.

36 MATERIALS SCIENCE↗

Understanding copper diffusion in CuInSe 2 with first-principles based atomistic and continuum models

We investigate the diffusion of copper in CuInSe 2 using thermodynamic and kinetic models based on density functional theory calculations, attempting to reconcile large differences in reported experimental diffusivities. We find that observations of rapid chemical diffusion can be explained by large thermodynamic factors, which we calculate using a compositionally constrained model of intrinsic point defect formation. We further characterize how copper diffusion coefficients depend on material synthesis conditions and exhibit their variation across the CuInSe 2 secondary phase diagram. In doing so, we identify stable off-stoichiometries that are dominated by either vacancy- or interstitial-mediated diffusion mechanisms. These results are employed in the development of a continuum reaction–diffusion model, which we use to simulate experimental depth profiles.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗