SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An asymmetric acceptor 5T-2C8-2Cl has been designed and an efficiency of 13.02% with simultaneously improved J sc and V oc has been achieved.
Correction for ‘A hole-transport material that also passivates perovskite surface defects for solar cells with improved efficiency and stability’ by Xiaoming Zhao et al. , Energy Environ. Sci. , 2020, 13 , 4334–4343, https://doi.org/10.1039/D0EE01655A.
We report on a large improvement of the thermal stability and mechanical properties of amorphous boron-nitride upon carbon doping.
This study examines the impact of two-sided and one-sided functional group changes of GO on the interface of CSH. It thoroughly investigates the friction dynamics of the CSH–GO interface and how it improves the fluidity of cement paste.
Correction for ‘Improving the direct air capture capacity of grafted amines via thermal treatment’ by Melinda L. Jue et al. , Chem. Commun. , 2024, 60 , 7077–7080, https://doi.org/10.1039/D4CC01634C.
Homogeneous earth abundant transition-metal electrocatalysts capable of carbon dioxide (CO 2 ) reduction to generate value-added chemical products are a possible strategy to minimize rising anthropogenic CO 2 emissions. Previously, it was determined that Cr-centered bipyridine-based N 2 O 2 complexes for CO 2 reduction are kinetically limited by a proton-transfer step during C–OH bond cleavage. Therefore, it was hypothesized that the inclusion of pendent relay groups in the secondary coordination sphere of these molecular catalysts could increase their catalytic activity. Here, it is shown that the introduction of a pendent methoxy group favorably impacts a pre-equilibrium protonation prior to the catalytic resting state, resulting in a significant increase in catalytic activity without a loss of product selectivity for generating carbon monoxide (CO) from CO 2 . Interestingly, combining the pendent methoxy group with a cationic acid causes a positive shift of the catalytic reduction potential of the system, while maintaining increased activity and quantitative selectivity. This work suggests that tuning the secondary coordination sphere with respect to cationic proton sources can result in activity improvements by modifying the kinetic and thermodynamic aspects of proton transfer in the catalytic cycle.
Phase stability and the optoelectronic performance of the metastable CsPbI 3 host can be improved with triple-halide alloying, without excessive Br addition which widens the gap beyond that ideal for tandem-photovoltaics.
Solvent extraction and separation of HTL products using naphtha range hydrocarbons was studied with the aim of decreasing operational hazards while improving scalability, reliability, and yields.
Among the various fuel cells, solid oxide cells (SOCs) are the unique type that can principally operate reversibly as either fuel cells to produce electricity or as an electrolyser to split water and produce green hydrogen (H 2 ). Nevertheless, the SOCs' reversibility presents enormous challenges that are manifested by the fast degradation through the cycling between fuel cell and electrolysis mode. While the La 0.8 Sr 0.2 MnO 3 /yttria-stabilized zirconia (LSM/YSZ) air electrode possesses significant advantages in terms of high electrical conductivity and high thermal stability under fuel cell mode, the SOCs with the LSM/YSZ air electrode experience rapid performance degradation with catastrophic electrode delamination shortly after switching from fuel cell to electrolysis mode. To prevent such catastrophic delamination and enable the electrolysis H 2 production, a chemical solution with the designed chemistry of SrFe 2 O 4-d was infiltrated into the LSM/YSZ air electrode. The infiltration immediately mitigates the catastrophic delamination, and the infiltrated cells exhibit significantly improved reversibility upon the electrochemical operation. Nanostructure examination reveals nanoscale cracks and second-phase nanograins formed in the air electrode from the baseline cell. By contrast, no delamination was observed at either the micron or the nanoscale for the infiltrated cell, which is attributed to the increased ion conductivity of the Fe-doped LSM mixed conductor induced by the significant interdiffusion between the LSM backbone and infiltrates. Here, this study presents a viable method for preventing electrode delamination while enhancing the durability of H 2 production and power generation for reversible fuel cell/electrolysis cell operation. It further opens new research directions of modifying the electrochemical activity of the electrode of inherently functional cells through the infiltration of the solutions with different chemistry.
Energy production is a fundamental pillar of modern society, but it remains heavily reliant on fossil fuel combustion, which leads to environmental degradation and resource depletion. Electrocatalytic reduction reactions (ERRs) offer a cleaner alternative by functioning under mild conditions, eliminating the need for high temperatures or pressures. However, their widespread adoption is hindered by challenges such as low efficiency, inadequate selectivity, and sluggish kinetics. Here, the introduction of chiral-induced spin selectivity (CISS) offers a promising strategy to address these limitations by reducing energy barriers in reactions involving spin-sensitive intermediates or transition states. By leveraging CISS, ERR pathways can be manipulated to favor desired reactions, enhance product yield, and suppress unwanted byproducts, improving selectivity. Beyond reducing the impact of competing side reactions, CISS also enhances the kinetics of ERRs by accelerating reaction rates and lowering the energy barriers associated with multi-electron transfer steps. Thanks to its straightforward and versatile application, CISS shows significant potential in optimizing well-studied ERRs, such as the hydrogen evolution reaction (HER) and carbon dioxide reduction reaction (CO2RR), facilitating the future transition of these technologies from research laboratories to commercial energy plants worldwide.
A vertical heterojunction barrier Schottky diode was fabricated by combining a p-type SnO film array with a β-Ga 2 O 3 substrate, yielding a lower reverse leakage current and an improved breakdown voltage than its Schottky barrier diode counterpart.
Glycosylation of secondary metabolites involves plant UDP-dependent glycosyltransferases (UGTs). UGTs have shown promise as catalysts in the synthesis of glycosides for medical treatment. However, limited understanding at the molecular level due to insufficient biochemical and structural information has hindered potential applications of most of these UGTs. In the absence of experimental crystal structures, we employed advanced molecular modeling and simulations in conjunction with biochemical characterization to design a workflow to study five Group H Arabidopsis thaliana (76E1, 76E2, 76E4, 76E5, 76D1) UGTs. Based on our rational structural manipulation and analysis, we identified key amino acids (P129 in 76D1; D374 in 76E2; K275 in 76E4), which when mutated improved donor substrate recognition than wildtype UGTs. Molecular dynamics simulations and deep learning analysis identified structural differences, which drive substrate preferences. The design of these UGTs with broader substrate specificity may play important role in biotechnological and industrial applications. These findings can also serve as basis to study other plant UGTs and thereby advancing UGT enzyme engineering.
Abstract A power system is a complex cyber‐physical system whose security is critical to its function. A major challenge is to model, analyse and visualise the communication backbone of the power systems concerning cyber threats. To achieve this, the design and evaluation of a cyber‐physical power system (CPPS) testbed called Resilient Energy Systems Lab (RESLab) are presented to capture realistic cyber, physical, and protection system features. RESLab is architected to be a fundamental platform for studying and improving the resilience of complex CPPS to cyber threats. The cyber network is emulated using Common Open Research Emulator (CORE), which acts as a gateway for the physical and protection devices to communicate. The physical grid is simulated in the dynamic time frame using Power World Dynamic Studio (PWDS). The protection components are modelled with both PWDS and physical devices including the SEL Real‐Time Automation Controller (RTAC). Distributed Network Protocol 3 (DNP3) is used to monitor and control the grid. Then, the design is exemplified and the tools are validated. This work presents four case studies on cyberattack and defence using RESLab, where we demonstrate false data and command injection using Man‐in‐the‐Middle and Denial of Service attacks and validate them on a large‐scale synthetic electric grid.
The double-fed induction generator (DFIG) usually experiences high rotor current and DC capacitor link voltage during system fault events. In this paper, a novel data-driven approach is proposed to enhance the DFIG performance under fault scenarios. An advanced reinforcement learning (RL) algorithm called guided surrogate-gradient-based evolution strategy (GSES) is used to control the DFIG power and capacitor DClink voltage by adjusting the optional reference signals. This controller is able to prevent the rotor of DFIG from overcurrent risk and maintain the grid-connected operation. The proposed GSES-based control algorithm was evaluated through simulations on a 3.6-MW DFIG in PSCAD/EMTDC software. Results have validated the effectiveness of the proposed GSESbased control algorithm in improving the DFIG performance under fault scenarios.
Aims. We present an improved database of temperature-dependent rate coefficients for rotational state-to-state transitions in H 2 O + H 2 O collisions. The database includes 231 transitions between the lower para-states of H 2 O and 210 transitions between its lower ortho-states (up toj= 7) and can be employed in cometary and planetary applications up to the temperature of 1000 K. Methods. We developed and applied a new general method that allows the generation of rate coefficients for excitation and quenching processes that automatically satisfy the principle of microscopic reversibility and also helps to cover the range of low collision energies by interpolation of cross sections between the process threshold and the computed data points. Results. We find that in the range of intermediate temperatures, 150
Context. Accurate 42 Ti(p,γ) 43 V reaction rates are crucial for understanding the nucleosynthesis path of the rapid capture process (rp process) that occurs in X-ray bursts. Aims. We aim to improve the thermonuclear rates of 42 Ti(p,γ) 43 V based on more complete resonance information and a more accurate direct component, together with the recently released nuclear masses data. We also explore the impact of the newly obtained rates on the rp process. Methods. We reevaluated the reaction rate of 42 Ti(p,γ) 43 V by the sum of the isolated resonance contribution instead of the Hauser-Feshbach statistical model. We used a Monte Carlo method to derive the associated uncertainties of new rates. The nucleosynthesis simulations were performed via the NuGrid post-processing code ppn. Results. The new rates differ from previous estimations due to the use of a series of updated resonance parameters and a direct S factor. Compared with the previous results from the Hauser-Feshbach statistical model, which assumes compound nucleus 43 V with a sufficiently high-level density in the energy region of astrophysical interest, large differences exist over the entire temperature region of rp-process interest, up to two orders of magnitude. We consistently calculated the photodisintegration rate using our new nuclear masses via the detailed balance principle, and found the discrepancies among the different reverse rates are much larger than those for the forward rate, up to ten orders of magnitude at the temperature of 10 8 K. Using a trajectory with a peak temperature of 1.95×10 9 K, we performed the rp-process nucleosynthesis simulations to investigate the impact of the new rates. Our calculations show that the adoption of the new forward and reverse rates result in abundance variations for Sc and Ca of 128% and 49%, respectively, compared to the variations for the statistical model rates. On the other hand, the overall abundance pattern is not significantly affected. The results of using new rates also confirm that the rp-process path does not bypass the isotope 43 V. Conclusions. Our study found that the Hauser-Feshbach statistical model is inappropriate to the reaction rate evaluation for 42 Ti(p,γ) 43 V. The adoption of the new rates confirms that the reaction path of 42 Ti(p,γ) 43 V(p,γ) 44 Cr(β + ) 44 V is a key branch of the rp process in X-ray bursts.
Aims. In this work we extended an energy-integrated neutrino transport method to facilitate efficient, yet precise, modeling of compact astrophysical objects. We particularly focus on core-collapse supernovae. Methods. We implemented a gray neutrino-transport framework from the literature into FLASH and performed a detailed evaluation of its accuracy in core-collapse supernova simulations. Based on comparisons with results from simulations using energy-dependent neutrino transport, we incorporated several improvements to the original scheme. Results. Our analysis shows that our gray neutrino transport method successfully reproduces key aspects from more complex energy-dependent transport across a variety of progenitors and equations of state. We find both qualitative and reasonable quantitative agreement with multi-group M1 transport simulations. However, the gray scheme tends to slightly favor shock revival. In terms of gravitational wave and neutrino signals, there is a good alignment with the energy-dependent transport, although we find 15–30% discrepancies in the average energy and luminosity of heavy-lepton neutrinos. Simulations using the gray transport are around four times faster than those using energy-dependent transport.
The default energy deposition model in the CASL neutronics code MPACT assumes all fission energy is deposited locally in fuel rods. Furthermore, equilibrium delayed energy release is assumed for both steady-state and transient calculations. These approximations limit the accurate representation of the heat generation distribution in space and its variations over time, which are essential for power distribution and thermal-hydraulic coupling calculations. In this paper, an improved energy deposition model is presented in both the spatial and time domains. Spatially, the energy deposition through fission, neutron capture, and slowing-down reactions are explicitly modeled to account for the heat generation from all regions of a reactor core, and a gamma smearing scheme is developed that utilizes the gamma sources from neutron fission and capture. In the time domain, the delayed energy release is modeled by solving an additional equation of delayed heat emitters, similar to the equation of delayed neutron precursors.To allow the explicit heat generation coupling, the interfaces between MPACT and CTF were updated to transfer separate heat sources for different material regions (fuel, clad, moderator and guide tube). The results show that the distributions of the energy deposition between MPACT and MCNP agree very well for various 2-D assembly and quarter-core problems without TH feedback. The MPACT/CTF coupled calculation for the hot full power quarter-core case exhibited a reduced peak pin power by 2.3% and a reduced peak fuel centerline temperature by 17 K when using the explicit energy deposition and heat transfer. The new model also shows a maximum 100 pcm keff effect on assembly depletion problems and an increased overall energy release by 7% in a PWR reactivity-initiated accident (RIA) problem.