Results for “impacts” — Page 76

NASA NTRS2020

Impact of Surface Albedo Assimilation on Snow Estimation

Surface albedo has a significant impact in determining the amount of available net radiation at the surface and the evolution of surface water and energy budget components. The snow accumulation and timing of melt, in particular, are directly impacted by the changes in land surface albedo. This study presents an evaluation of the impact of assimilating Moderate Resolution Imaging Spectroradiometer (MODIS)-based surface albedo estimates in the Noah multi-parameterization (Noah-MP) land surface model, over the continental US during the time period from 2000 to 2017. The evaluation of simulated snow depth and snow cover fields show that significant improvements from data assimilation (DA) are obtained over the High Plains and parts of the Rocky Mountains. Earlier snowmelt and reduced agreements with reference snow depth measurements, primarily over the Northeast US, are also observed due to albedo DA. Most improvements from assimilation are observed over locations with moderate vegetation and lower elevation. The aggregate impact on evapotranspiration and runoff from assimilation is found to be marginal. This study also evaluates the relative and joint utility of assimilating fractional snow cover and surface albedo measurements. Relative to surface albedo assimilation, fractional snow cover assimilation is found to provide smaller improvements in the simulated snow depth fields. The configuration that jointly assimilates surface albedo and fractional snow cover measurements is found to provide the most beneficial improvements compared to the univariate DA configurations for surface albedo or fractional snow cover. Overall, the study also points to the need for improving the albedo formulations in land surface models and the incorporation of observational uncertainties within albedo DA configurations.

surface albedo↗

NASA NTRS2021

Impact of Regional Northern Hemisphere Mid-latitude Anthropogenic Sulfur Dioxide Emissions on Local and Remote Tropospheric Oxidants

The unintended consequences of reductions in regional anthropogenic sulfur dioxide (SO2) emissions implemented to protect human health are poorly understood. SO2 decreases began in the 1970s in the US and Europe and are expected to continue into the future, while recent emissions decreases in China are also projected to continue. In addition to the well-documented climate effects (warming) from reducing aerosols, tropospheric oxidation is impacted via aerosol modification of photolysis rates and radical sinks. Impacts on the hydroxyl radical and other trace constituents directly affect climate and air quality metrics such as surface ozone levels. We use the Geophysical Fluid Dynamics Laboratory Atmospheric Model version 3 nudged towards National Centers for Environmental Prediction (NCEP) reanalysis wind velocities to estimate the impact of SO2 emissions from the US, Europe, and China by differencing a control simulation with an otherwise identical simulation in which 2015 anthropogenic SO2 emissions are set to zero over one of the regions. Springtime sulfate aerosol changes occur both locally to the emission region and also throughout the Northern Hemispheric troposphere, including remote oceanic regions and the Arctic. Hydroperoxy (HO2) radicals are directly removed via heterogeneous chemistry on aerosol surfaces, including sulfate, in the model, and we find that sulfate aerosol produced by SO2 emissions from the three individual northern mid-latitude regions strongly reduces both HO2 and hydroxyl (OH) by up to 10 % year-round throughout most of the troposphere north of 30∘ N latitude. Regional SO2 emissions significantly increase nitrogen oxides (NOx) by about 5 %–8 % throughout most of the free troposphere in the Northern Hemisphere by increasing the NOx lifetime as the heterogeneous sink of HO2 on sulfate aerosol declines. Despite the NOx increases, tropospheric ozone decreases at northern mid-latitudes by 1 %–4 % zonally averaged and by up to 5 ppbv in summertime surface air over China, where the decreases in HO2 and OH suppress O3 production. Since 2015 anthropogenic SO2 emissions in China exceed those in the US or Europe, the oxidative response is greatest for the China perturbation simulation. Chemical effects of aerosols on oxidation (reactive uptake) dominate over radiative effects (photolysis rates), the latter of which are only statistically significant locally for the large perturbation over China. We find that the SO2 emissions decrease in China, which has yet to be fully realized, will have the largest impact on oxidants and related species in the Northern Hemisphere free troposphere compared to future decreases in Europe or the US. Our results bolster previous calls for a multipollutant strategy for air pollution mitigation to avoid the unintended consequence of aerosol removal leading to surface ozone increases that offset or mask surface ozone gains achieved by regulation of other pollutants, especially in countries where current usage of high-sulfur emitting fuels may be phased out in the future.

anthropogenic sulfur dioxide emissions↗

NASA NTRS2022

Observation Impact and Information Retention in the Lower Troposphere of the GMAO GEOS Data Assimilation System

In this study, we have assessed the effectiveness of the use of existing observing systems in the lower troposphere in the GEOS hybrid–4DEnVar data assimilation system through a set of observing system experiments. The results show that microwave radiances have a large impact in the Southern Hemisphere and Tropical ocean, but the large influence is mostly observed above 925 hPa and dissipates relatively quickly with longer forecast lead times. Conventional data information holds better in the forecast ranging from the surface to 100 hPa, depending on the field evaluated, in the Northern Hemisphere and lowest model levels in the Tropics. Infrared radiances collectively have much less impact in the lower troposphere. Removing surface observations has small but persistent impact on specific humidity in the upper atmosphere, but small or negligible impact on planetary boundary layer (PBL) height and temperature. The model responses to the incremental analysis update (IAU) forcing are also analyzed. In the IAU assimilation window, the physics responds strongly to the IAU forcing in the lower troposphere, and the changes of physics tendency in the lower troposphere and hydrodynamics tendency in the mid- and upper troposphere are viewed as beneficial to the reduction of state error covariance. In the subsequent forecast, the model tendencies continue to deviate further from the original free forecast with forecast lead times around 300–400 hPa, but physics tendency has showed signs of returning to its original free forecast mechanisms at 1-day forecast in the lower troposphere.

GEOS↗

NASA NTRSDate not supplied

IMPACT 1.0—Task Impairment: A Novel Approach for Assessing Impairment during Exploration-Class Missions

Exploration-class and International Space Station (ISS) missions have significantly different levels of associated medical risk for crewmembers. The Integrated Medical Model (IMM), the probabilistic risk assessment tool used for ISS medical trade-space analyses, uses a Functional Impairment (FI) metric to determine quality time lost should a crewmember be afflicted with a medical condition. While IMM-based FI has been successful for ISS operations, it has limitations when applied to exploration-class missions. As the National Aeronautics and Space Administration (NASA) looks ahead to Gateway, Artemis, and Martian missions, a novel, dynamic, and mission-appropriate impairment paradigm is necessary for accurate contingency planning. This paradigm, Task Impairment (TI), fulfills that need by utilizing mission-specific tasks. TI will allow future capability for a loss of mission metric, previously not available with IMM. TI serves as a replacement metric for FI within IMPACT, the next-generation trade-space analysis tool suite created to replace the IMM. IMPACT significantly increases the fidelity of probabilistic risk assessment for exploration-class missions. The Human Exploration of Mars Preliminary List of Crew Tasks (MTL, a source of 1100+ exploration-class mission-specific tasks for crewmembers) was used to calculate TI. Using the Task List, 18 individual Human System Categories were identified as being required to perform each task (e.g., Cardiopulmonary, Cognitive, etc.). Each of the 1200+ tasks were mapped to the Human System categories listed in the Task List. The total number of tasks in each category were tallied to determine how many tasks required each Human System. Lastly, each of the 120 medical conditions from the IMPACT condition list were mapped to the Human System categories to complete the TI calculation. NASA subject matter experts across five medical specialties established consensus for the mapping of each condition. The resulting total tasks impaired by each condition were used to calculate discrete TI values. This process was repeated for each of the four severity/resource utilization variants of each condition, and for each of the three phases of clinical care. Through this process, discrete TI values were calculated for each of the 120 IMPACT medical conditions and their variants. The Task Impairment metric provides higher fidelity, dynamic utility, and quicker analysis of medical impairment compared to the previous Functional Impairment metric used for the Integrated Medical Model. TI will be used for higher fidelity medical impairment analysis and contingency planning during Lunar, Martian, and other long-term exploration-class missions.

William L Fernandez↗

NASA NTRSDate not supplied

The Impacts of Heating Actuators in Extremely Cold Space Environments

Conventional, grease-lubricated actuators for space mechanisms can achieve long life but must be heated above about 213 K, or -60 °C, to function in extremely cold environments. This paper first overviews a new NASA project that is developing two rotational actuators that can achieve long life without the need for supplemental heating. Then, the impacts of heating conventional, grease-lubricated actuators are studied for operation in a lunar permanently shadowed region. To facilitate the assessment, a novel total efficiency metric is introduced that relates the average power output to the average total power input (i.e., the power to heat plus the power to actuate/rotate). The assessment employs a thermal analysis of the energy required to heat an actuator from a survival temperature of 30 K to 213 K as well as the power required to subsequently maintain 213 K while in an operational state. Two concepts of actuator operation are considered that separately highlight the impacts of warmup heating energy and maintenance heater power. It is shown that in practical situations, the perceived efficiency of an actuator with 100% conventional operating efficiency can reach 10% or lower, particularly when the actuator has a high emissivity and is operated at lower duty cycles for durations less than 10 hours. Other impacts are presented along with a method of mitigating the impacts in some applications.

Extreme Environments↗

NASA NTRSDate not supplied

Analysis of Hypervelocity-Impacted Thin Films for Space Applications

Exposure to the harsh space environment and hypervelocity impacts from micrometeoroids and small orbital debris can affect space operations through long-term degradation of spacecraft materials, surfaces, or systems. Multi-layer insulation (MLI) and coated polyimide films are space-craft materials commonly found on the external surfaces of spacecraft for thermal control and protection. Characterizing the damage to these exposed materials with in-situ and laboratory measurements can better inform spacecraft designers and operators in understanding and mitigating surface or system degradation. In this paper, we examine flown Hubble Space Telescope (HST) Electronic Bay 5 MLI and coated polyimide ground test articles to characterize hyper-velocity impact damage. Impact feature cavities are inspected to identify damage, which can validate long-term degradation models, improve thermal management systems, or improve accuracy of damage predictions. An overview of the impact characterization using optical microscopy, narrow-band spectroscopy, and scanning election microscopy/energy dispersive x-ray (SEM/EDX) of the two materials is presented. Observations of robustness in the space environment, as well as a detailed assessment of cratering and penetration statistics for the space-exposed sample, also are discussed.

Melissa A Ward↗

NASA NTRS2021

Low Cost Access to Mars Surface using a Small Impact Lander

In order to reduce the cost of landing small payloads on Mars, a new technology is being developed: the Small High Impact Energy Landing Device concept (SHIELD). The purpose of SHIELD is to provide a low-cost option to deliver up to 6 kg of science payload to the surface of Mars. SHIELD could be launched as a hosted payload, rideshare on an EELV secondary payload adapter (ESPA), or launching from a dedicated small launch vehicle using a kick stage. The SHIELD concept can achieve low-cost access to Mars by taking advantage of a low ballistic coefficient design to decelerate safely instead of using the typically required parachutes and/or propulsion to decelerate and stabilize itself during entry, decent, and landing (EDL). Current finite element simulations suggest that SHIELD would experience an impact acceleration pulse ranging from 1000 to 2000 g’s with a duration of 8 milliseconds. The SHIELD concept payload subsystem includes a “ruggedized” small warm electronics box (WEB). The WEB houses the telecommunications, command and data handling, thermal control, electrical power, and payload subsystems while maintaining an internal operating temperature ranging between -20° to 20° C. The system is designed to survive the Martian night by utilizing electric heaters powered with solar cells during the day and secondary batteries. The WEB is designed to be impact resistant capable of surviving an impact acceleration pulse equal to or less than 2000 g’s.

Woolley, Ryan↗

NASA NTRSDate not supplied

The Impacts of Heating Actuators in Extremely Cold Space Environments

Conventional, grease-lubricated actuators for space mechanisms can achieve long life but must be heated above about 213 K, or -60 °C, to function in extremely cold environments. This paper first overviews a new NASA project that is developing two rotational actuators that can achieve long life without the need for supplemental heating. Then, the impacts of heating conventional, grease-lubricated actuators are studied for operation in a lunar permanently shadowed region. To facilitate the assessment, a novel total efficiency metric is introduced that relates the average power output to the average total power input (i.e., the power to heat plus the power to actuate/rotate). The assessment employs a thermal analysis of the energy required to heat an actuator from a survival temperature of 30 K to 213 K as well as the power required to subsequently maintain 213 K while in an operational state. Two concepts of actuator operation are considered that separately highlight the impacts of warmup heating energy and maintenance heater power. It is shown that in practical situations, the perceived efficiency of an actuator with 100% conventional operating efficiency can reach 10% or lower, particularly when the actuator has a high emissivity and is operated at lower duty cycles for durations less than 10 hours. Other impacts are presented along with a method of mitigating the impacts in some applications.

space actuator↗

NASA NTRS2021

Low Cost Access to Mars Surface using a Small Impact Lander

In order to reduce the cost of landing small payloads on Mars, a new technology is being developed: the Small High Impact Energy Landing Device concept (SHIELD). The purpose of SHIELD is to provide a low-cost option to deliver up to 6 kg of science payload to the surface of Mars. SHIELD could be launched as a hosted payload, rideshare on as a secondary payload adapter, or launching from a dedicated small launch vehicle using a kick stage to get to Mars. In order to enable delivery of low cost, SHIELD uses a large diameter deployed drag surface (> 2 m diameter) and low entry mass (< 50 kg) to achieve a very low ballistic coefficient (< 10 kg/m^2): this low ballistic coefficient results in low terminal velocity (< 70 m/sec) without requiring a parachute. Upon impacting the Martian surface at terminal velocity, SHIELD uses a mechanism to decelerate the payload to rest in a robust and predictable manner that limits acceleration of the payload to < 2000 g with a duration less than 8 milliseconds. The SHIELD concept payload subsystem includes a “ruggedized” small warm electronics box (WEB). The WEB houses the telecommunications, command and data handling, thermal control, electrical power, and payload subsystems while maintaining an internal operating temperature ranging between -20° to 20° C. The system is designed to survive the Martian night by utilizing electric heaters powered in a highly insulated box that is powered solar cells and secondary batteries. The WEB is designed to be impact resistant, capable of surviving an impact acceleration pulse equal to or less than 2000 g’s.

Woolley, Ryan↗

NASA NTRSDate not supplied

Parameters Impacting Columnated Granular Soil Pneumatic Seal Performance

The ability of a column of loose granular soil to form a pneumatic seal was investigated by varying the diameter of the soil column, the effective column height, and the level of compaction in the soil. The soil column diameter was tested at three levels using pipes with inner diameters measuring 5.08, 10.16, and 15.24 centimeters (2, 4, and 6 inches). Soil was filled in each pipe to form 15, 30, and 45 centimeter (6, 12, and 18 inch) tall soil columns. Each diameter/height configuration was also tested at three levels of soil compaction, compared by calculating the bulk density of the soil with mass and volume measurements. GRC-1a simulant was used, with approximate low/medium/high bulk densities of 1.6, 1.75, and 1.9 g/cc achieved with a combination of vibration and tamping. The order of tests for a given column diameter was randomized and repeated three times. With the top of the soil open to atmosphere at room temperature, compressed air was injected through a small diffuser at the column base with several small downward-facing holes. The number and size of these holes was scaled such that a constant total inlet orifice area to column cross sectional area ratio was maintained for each column diameter. Inlet air pressure was slowly increased via a precision regulator to preserve quasi-static equilibrium in the soil column to minimize the impact of dynamics. Air pressure was increased all the way through the static and bubbling regimes until slugging or turbulent behavior was observed in the soil to ensure that the entire static regime had been captured during data collection. A three-factor, three-level analysis of variance (ANOVA) statistical analysis was performed on the resulting data to determine the extent to which each physical parameter impacted the soil column seal performance. It was concluded that there is statistically significant evidence that column height, and the interaction between column height and diameter impact soil seal performance. In all other cases there was insufficient data to identify a statistically significant causal relationship. Additionally, plots were generated comparing experimental data to the predictive formula developed by Ogino et al. for fluidized beds in 1993. Because this model was developed for industrial spouted fluidized beds, the accuracy of its output prior to fluidization in the static seal ‘edge case’ is unknown, especially considering in this application the working gas was diffused across the column base rather than being injected through a spout. Further, the fidelity of the model had not yet been tested with lunar soil simulants. Plotting the Ogino et al. model alongside test data allows for a more intuitive sense of the impact of test parameters on soil seal performance, as well as providing a quick means to further tune this predictive model for more accurate use with static seals across granular lunar soil simulants. The model provided by Ogino et al. was further tuned using test data to determine the degree to which a spouted bed model could be applied to a slightly modified set of testing conditions: lunar soil simulants and a more diffuse, homogeneous application of pneumatic pressure. A Matlab script was created to test different values for the leading coefficient and exponents in Ogino’s formula. The script swept preset ranges, then iterated with higher resolutions across narrower ranges to converge on the optimal value for each parameter. The resulting adjusted model was compared to the original, as well as test data with noticeable improvements across the entire test domain.

Jack Stewart↗

NASA NTRSDate not supplied

Analysis of Hypervelocity-Impacted Thin Films for Space Applications

Exposure to the harsh space environment and hypervelocity impacts from micrometeoroids and small orbital debris can affect space operations through long-term degradation of spacecraft materials, surfaces, or systems. Multi-layer insulation (MLI) and coated, polyimide films are spacecraft materials commonly found on the external surfaces of spacecraft for thermal control and protection. Characterizing the damage to these exposed materials with in situ and laboratory measurements can better inform spacecraft designers and operators in understanding and mitigating surface or system degradation. In this paper, we examine flown Hubble Space Telescope (HST) Equipment Bay 5 MLI and coated, polyimide ground test articles to characterize hypervelocity impact damage. Impact feature cavities are inspected to identify damage, which can validate long-term degradation models, improve thermal management systems, or improve accuracy of damage predictions. An overview of the impact characterization using optical microscopy, narrowband spectroscopy, and Scanning Election Microscopy/Energy Dispersive X- ray (SEM/EDX) of the two materials is presented. Observations of robustness in the space environment, as well as a detailed assessment of cratering and penetration statistics for the space-exposed sample, also are discussed.

Melissa A. Ward↗

NASA NTRSDate not supplied

Observing Ice Phase Clouds and Precipitation with Millimeter- and Submillimeter-wave Radiometry during the IMPACTS field campaign: Algorithm Development for the Emerging Class of Microwave Radiometers

Millimeter- and submillimeter-wave (mmWave, submm) radiometers provide significant information content on atmospheric water in liquid, ice, and vapor phases. Recent sensors, such as the Global Precipitation Measurement (GPM) or the Temporal Experiment for Storms and Tropical Systems Technology – Demonstration (TEMPEST-D), use mmWave bands to improve estimation of ice-phase precipitation, and future missions, such as the Atmosphere Observing System (AOS), will extend to submm to provide additional information on thinner ice clouds, linking clouds and precipitation and therefore elucidating the links between weather, climate, and the water cycle. To support the expanded use of mmWave/submm radiometry and exploit the available information content on condensed water mass, we demonstrate ice and liquid water path retrievals for NASA Goddard Space Flight Center's airborne radiometers the Conical Scanning Millimeter-wave Imaging Radiometer (CoSMIR) and the Configurable Scanning Submillimeter-wave Instrument/Radiometer (CoSSIR, formerly the Compact Scanning Submillimeter Imaging Radiometer). The analysis is based on data collected during the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Storms (IMPACTS) field campaign. A simulation study compares and contrasts retrievals for CoSMIR and CoSSIR, with CoSSIR demonstrating higher skill in ice retrievals, particularly for thin clouds, and the CoSMIR frequencies performing better for liquid. Additionally, we look at dual-polarized radiances observed by CoSMIR during the first two IMPACTS deployments to understand the polarization signatures induced by oriented hydrometeors. Results will be presented in the context of upcoming missions and sensors including AOS and the Ice Cloud Imager (ICI). We will describe the objectives for the expected first flight of the newly upgraded CoSSIR during the final IMPACTS deployment, and we will share novel science investigations we plan to undertake with CoSSIR's new capabilities. Popular Summary: Ice in clouds and falling snow is an important component of weather, climate, and water resources. To better use a new class of sensors that provide information on atmospheric ice, we developed an approach to measure ice clouds and falling snow using airborne data taken during the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Storms (IMPACTS), a field campaign to study winter storms. We look at the results for two similar instruments to understand how those differences affect these measurements of clouds and snow, and we further investigate the information the sensors can provide on properties of the clouds and snow.

Ian S Adams↗

NASA NTRSDate not supplied

Impact Outputs for A Representative Extended Duration Artemis Mission

BACKGROUND: As NASA and private industry begin preparation for long-duration spaceflight, quantifying the impact that potential human health and performance capabilities have on crew health outcomes is imperative for medical risk mitigation. NASA’s Informing Mission Planning via Analysis of Complex Tradespaces tool (IMPACT) applies Probabilistic Risk Assessment (PRA) methodology to estimate these outcomes. OVERVIEW: As NASA prepares to return to the Moon, medical system planning has already begun for extended Artemis missions, which will see humans spending months at a time in cis-lunar space and on the surface of the Moon. The Long Duration Lunar Orbital and Lunar Surface (LDLOLS) design reference mission (DRM) lasts 9 months, including 3 months on the lunar surface, and involves 2 male and 2 female crewmembers. LDLOLS assumes no extravehicular activities (EVAs) in orbit, but, while on the lunar surface, involves 2-4 EVAs/month in a pressurized rover and 2-4 EVAs/month in an unpressurized rover or on foot. This DRM assumes a physician level Crew Medical Officer with commensurate knowledge, skills, and abilities. The IMPACT tool was utilized to estimate in-flight medical risk for this mission. More specifically, 100,000 simulations of this DRM were modeled, and overall estimates for loss of crew life (LOCL), need for evacuation (RTDC; return to definitive care), and crew task time lost (TTL; a measure of disability) were calculated. A recommended medical capability set, with appropriate mass and volume constraints, was also generated. DISCUSSION: This abstract reviews the IMPACT-derived risk for these mission outcomes with and without treatment, a macroscopic look at the total mass and volume necessary for full diagnostic and treatment capability, and how these change with input mission parameters.

J G Steller↗

NASA NTRSDate not supplied

Initial Exploratory Study of the Impacts of Climate Change on Air Traffic Operations

Climate change is already happening and is projected to accelerate in the future. It will persist for the foreseeable future, even with optimistic projections of technological advances and behavior changes. It will make aviation more and more challenging over time. Among other things, it is expected to cause increased severe weather, more extreme temperatures, and rising sea levels that constrain when, where, and how aircraft can fly. NASA has many prior, ongoing, and upcoming efforts towards mitigating the impacts of aviation on climate change. There is also a need to perform a comprehensive investigation of the reverse: that is, the impacts of climate change on aviation. This is an initial exploratory study on this topic utilizing the NAS Digital Twin—composed of the ATM TestBed simulation platform and NAS Digital Twin airspace management algorithms—to run NAS-wide simulations with Convective Weather Avoidance Model polygons at different avoidance thresholds to emulate the increase in severe weather that could manifest due to climate change. It was found that air traffic management may be able to limit the impact of climate change in terms of delay and fuel burn. However, increased severe weather due to climate change can make separation—particularly, aircraft-to-weather separation—more challenging by reducing available airspace and constraining the solution space. Challenging situations were identified and corresponding potential solutions were proposed towards ensuring air traffic operations continue to be robust and resilient to the impacts of increased severe weather due to climate change.

climate change, weather, air traffic operations↗

NASA NTRSDate not supplied

Global NWP Impacts of Infrared Sounders from Geostationary Orbit

The Geostationary eXtended Observations (GeoXO) program, expected to launch in the 2030s, includes a proposed infrared (IR) sounder that would provide persistent atmospheric profile observations over much of the western hemisphere. In preparation, the National Aeronautics and Space Administration (NASA) Global Modeling and Assimilation Office (GMAO) observing system simulation experiment (OSSE) framework was used to assess the impact of such an instrument on global numerical weather prediction (NWP) as part of a global “ring” of such instruments. Building on previous preliminary studies, an evaluation of the impact of geostationary IR sounders will be presented with foci on the analysis, forecasts, and the forecast sensitivity observation impact (FSOI) metric, including an examination of the consequences for tropical cyclone representation. Overall, assimilation of geostationary IR provide a beneficial impact for NWP applications.

Erica L. Mcgrath-spangler↗

NASA NTRS2022

Investigation of Microphysics and Precipitation for Atlantic Coast Threatening Snowstorms (IMPACTS): the 2022 Deployment

The Investigation of Microphysics and Precipitation for Atlantic Coast Threatening Snowstorms (IMPACTS) is a NASA-supported field campaign to study snowstorms particularly over the northeastern United States. Snowfall within these winter storms is often organized in banded structures that can vary on multiple scales. The goals of IMPACTS are to characterize the spatial and temporal scale of snowbands, understand the processes controlling the structure and evolution of the bands and apply this knowledge to improving remote sensing and numerical modeling. IMPACTS takes place over three winter seasons, 2020, 2022 and 2023. IMPACTS flies two aircraft: the ER-2 equipped with satellite-simulating remote sensing instruments; and the P-3 equipped with in situ microphysics probes and environmental instrumentation. Stationary and mobile radar facilities and mobile sounding teams round out the observational assets. The preliminary results from the 2022 deployment are highlighted here.

Lynn A McMurdie↗

NASA NTRS2023

Convective Impact on the Global Lower Stratospheric Water Vapor Budget

Water vapor in the stratosphere is primarily controlled by temperatures in the tropical upper troposphere and lower stratosphere. However, the direct impact of deep convection on the global lower stratospheric water vapor budget is still an actively debated issue. Two complementary modeling approaches are used to investigate the convective impact in boreal winter and summer. Convective influence is diagnosed by tracing trajectories through convective cloud top altitude fields derived from global rainfall and brightness temperature data. Backward trajectory model simulations coupled with a detailed treatment of cloud microphysical processes indicate that convection moistens the global lower stratosphere by approximately 0.3 ppmv in boreal winter and summer 2010. The diurnal peak in convection is responsible for about half of the total convective moistening during winter and nearly all of the convective moistening during summer. Deep convective clouds overshooting the tropopause have relatively minor effect on global lower stratospheric water vapor. A forward trajectory model coupled with a simplified cloud module is used to estimate the relative magnitude of the interannual variability of the convective impact. Combining the results from the two models, we find that the convective impact on the global lower stratospheric water vapor during 2006-2016 is approximately 0.3 ppmv with year-to-year variations of up to 0.1 ppmv. An important mechanism of convective hydration of the lower stratosphere is via the detrainment of saturated air and ice into the tropical uppermost troposphere and the subsequent upward transport of some of these moist air parcels across relatively warm and subsaturated tropopause.

CONVECTION↗

NASA NTRSDate not supplied

Observing Ice Phase Clouds and Precipitation with Millimeter- and Submillimeter-wave Radiometry during the IMPACTS field campaign: Algorithm Development for the Emerging Class of Microwave Radiometers

Millimeter- and submillimeter-wave (mmWave, submm) radiometers provide significant information content on atmospheric water in liquid, ice, and vapor phases. Recent sensors, such as the Global Precipitation Measurement (GPM) or the Temporal Experiment for Storms and Tropical Systems Technology – Demonstration (TEMPEST-D), use mmWave bands to improve estimation of ice-phase precipitation, and future missions, such as the Atmosphere Observing System (AOS), will extend to submm to provide additional information on thinner ice clouds, linking clouds and precipitation and therefore elucidating the links between weather, climate, and the water cycle. To support the expanded use of mmWave/submm radiometry and exploit the available information content on condensed water mass, we demonstrate ice and liquid water path retrievals for NASA Goddard Space Flight Center's airborne radiometers the Conical Scanning Millimeter-wave Imaging Radiometer (CoSMIR) and the Configurable Scanning Submillimeter-wave Instrument/Radiometer (CoSSIR, formerly the Compact Scanning Submillimeter Imaging Radiometer). The analysis is based on data collected during the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Storms (IMPACTS) field campaign. A simulation study compares and contrasts retrievals for CoSMIR and CoSSIR, with CoSSIR demonstrating higher skill in ice retrievals, particularly for thin clouds, and the CoSMIR frequencies performing better for liquid. Additionally, we look at dual-polarized radiances observed by CoSMIR during the first two IMPACTS deployments to understand the polarization signatures induced by oriented hydrometeors. Results will be presented in the context of upcoming missions and sensors including AOS and the Ice Cloud Imager (ICI). We will describe the objectives for the expected first flight of the newly upgraded CoSSIR during the final IMPACTS deployment, and we will share novel science investigations we plan to undertake with CoSSIR's new capabilities. Popular Summary: Ice in clouds and falling snow is an important component of weather, climate, and water resources. To better use a new class of sensors that provide information on atmospheric ice, we developed an approach to measure ice clouds and falling snow using airborne data taken during the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Storms (IMPACTS), a field campaign to study winter storms. We look at the results for two similar instruments to understand how those differences affect these measurements of clouds and snow, and we further investigate the information the sensors can provide on properties of the clouds and snow.

Ian S Adams↗