Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hybrids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
NASA NTRS1968

Research on the combustion mechanism of hybrid rockets

Investigations of the turbulent boundary layer with heat transfer, mass transfer, and chemical reactions are reviewed, with emphasis on recent studies motivated by the hybrid combustion problem. Relatively high mass injection rates and rapidly changing composition and enthalpy boundary conditions along the boundary layer edge are inherent to the hybrid problem, and earlier treatments are somewhat inconsistent with this situation. To account for these aspects, a more recent analysis reviewed here differs from earlier ones in the way the mass transfer number B, or thermochemical driving force, is related to the thermodynamic parameters of the propellants and flow and in the treatment of the heat transfer blocking effect caused by wall mass injection. It is shown that the present boundary layer analysis is applicable up to B 100, while the maximum thermochemical driving force available from any possible combination of propellants is less than 40. This analysis is used to predict the regression rate performance of several typical propellant combinations with good accuracy.

G A Marxman↗
NASA NTRS1972

An improved data transfer and storage technique for hybrid computation

Improved technique was developed for transferring and storing data at faster than real time speeds on hybrid computer. Predominant advantage is combined use of electronic relays, track and store units, and analog-to-digital and digital-to-analog conversion units of hybrid computer.

Hansing, A. M.↗
NASA NTRS1971

Predicted characteristics of an optimized series-hybrid conical hydrostatic ball bearing

Optimized series-hybrid fluid-film ball bearings are described and operating characteristics are calculated and discussed. It is predicted that a series-hybrid bearing may be constructed which will reduce ball-bearing speed by 30 percent thereby increasing bearing fatigue life by factors of up to 5.9. Flow rates required are less than 9 kilograms per minute.

Nypan, L. J.↗
NASA NTRS1971

The series hybrid bearing - A new high speed bearing concept.

The series-hybrid bearing couples a fluid-film bearing with a rolling-element bearing such that the rolling-element bearing inner race runs at a fraction of shaft speed. A series-hybrid bearing was analyzed and experiments were run at thrust loads from 100 to 300 lb and speeds from 4000 to 30,000 rpm. Agreement between theoretical and experimental speed sharing was good. The lowest speed ratio (ratio of ball bearing inner-race speed to shaft speed) obtained was 0.67. This corresponds to an approximate reduction in DN value of 1/3. For a ball bearing in a 3 million DN application, fatigue life would theoretically be improved by a factor as great as 8.

Anderson, W. J.↗
NASA NTRS1972

Finite element appendage equations for hybrid coordinate dynamic analysis.

The increasingly common practice of idealizing a spacecraft as a collection of interconnected rigid bodies to some of which are attached linearly elastic flexible appendages leads to equations of motion expressed in terms of a combination of discrete coordinates describing the arbitrary rotational motions of the rigid bodies and distributed or modal coordinates describing the small, time-varying deformations of the appendages: such a formulation is said to employ a hybrid system of coordinates. In the present paper the existing literature is extended to provide hybrid coordinate equations of motion for a finite element model of a flexible appendage attached to a rigid base undergoing unrestricted motions and some of the advantages of the finite element approach are noted. Transformations to the modal coordinates appropriate for the general case are provided.

Likins, P. W.↗
NASA NTRS1972

Liapunov stability analysis of hybrid dynamical systems with multi-elastic domains.

This paper presents a Liapunov stability theory applicable to hybrid systems with multi-elastic domains. The mathematical formulation consists of a simultaneous set of ordinary and partial differential equations. A new stability theorem, particularly suited to such hybrid systems, is introduced. To predict the system stability by means of the theorem, it is necessary to construct a functional k, where k is free of spatial derivatives and bounding the Hamiltonian H from below. The conditions under which the construction of such a functional is possible are shown. As an application of the theory, the attitude stability of an earth-pointing satellite with multi-elastic domains is investigated and closed-form stability criteria derived.

Meirovitch, L.↗
NASA NTRS1972

Nucleic acid hybridization with RNA immobilized on filter paper.

RNA has been immobilized in a manner suitable for use in molecular hybridization experiments with dissolved RNA or DNA by a nonaqueous solid-phase reaction with carbonyldiimidazole and RNA 'dry coated' on cellulose or, preferably, on previously activated phosphocellulose filters. Immobilization of RNA does not appear to alter its chemical character or cause it to acquire affinity for unspecific RNA or DNA. The versatility and efficiency of this method make it potentially attractive for use in routine analytical or preparative hybridization experiments, among other applications.

Saxinger, W. C.↗
NASA NTRS1973

Development of a hybrid microelectronics solid state relay for 2500 volts isolation and minus 120 C to 80 C thermal cycling range

A hybrid microelectronics solid state relay was developed in a TO-116 package for the MINX project. The relay provides 2500 Vdc input to output isolation and operated from a MHTL logic signal to switch a load of 400 Vdc at 2 mA. The relay is designed to operate in space and survive 1000 thermal cycles of 120 C to 80 C. The use of X-rays for failure analysis in small hybrid circuits proved valuable and the applications of vacuum deposited Parylene as a dielectric coating proved extremely valuable.

Sater, B. L.↗
NASA NTRS1972

Optimal speed sharing characteristics of a series-hybrid bearing.

A series-hybrid bearing assembly consisting of a conical hydrostatic fluid-film bearing and a ball bearing is described. Computer studies are used to predict friction torque and life characteristics of a 150-mm ball bearing. A conical hydrostatic fluid-film bearing is designed for minimum friction and maximum speed reduction of the ball-bearing component of the series-hybrid bearing. At a thrust load of 4000 lb and speeds corresponding to DN (bearing bore in millimeters times shaft speed in rpm) values of 3 and 4 million, ball-bearing speed may be reduced to 30%. This speed reduction corresponds to ball-bearing fatigue life improvement factors of 3.4 at 3 million DN and 5.9 at 4 million DN. An oil flow rate at 18.2 lb/min is required to maintain a fluid-film thickness of 0.001 in. in the hydrostatic bearing.

Nypan, L. J.↗
NASA NTRS1972

Hybrid and concatenated coding applications.

Results of a study to evaluate the performance and implementation complexity of a concatenated and a hybrid coding system for moderate-speed deep-space applications. It is shown that with a total complexity of less than three times that of the basic Viterbi decoder, concatenated coding improves a constraint length 8 rate 1/3 Viterbi decoding system by 1.1 and 2.6 dB at bit error probabilities of 0.0001 and one hundred millionth, respectively. With a somewhat greater total complexity, the hybrid coding system is shown to obtain a 0.9-dB computational performance improvement over the basic rate 1/3 sequential decoding system. Although substantial, these complexities are much less than those required to achieve the same performances with more complex Viterbi or sequential decoder systems.

Hofman, L. B.↗
NASA NTRS1973

Design guidelines for use of adhesives in hybrid microcircuits

Although it is generally accepted that the use of adhesives in the assembly of hybrid microcircuits offers advantages over other bonding methods, there currently does not exist a set of guidelines for the selection of adhesives which will insure that hybrid microcircuits assembled with them will meet the long use-life, high-reliability requirements of electronic equipment for space applications. This study was directed to the identification of the properties of electrically insulative adhesives that potentially could cause problems in such an application, and to the development of evaluation tests to quantify these properties and thus form the basis for establishing suitable guidelines and, ultimately, specifications. Bond strength, outgassing after cure, and corrosivity were selected for detailed attention since they are considered to be especially critical. Introductory discussion includes enumeration and brief comments on the properties of adhesives considered to be important for the proposed application, a general review of polymeric types of adhesives, and identification of the major types of adhesives commercially available and specifically designed for microelectronic use. The specific tests developed to evaluate bond strength, outgassing after cure, and corrosivity are discussed in detail, and comparative results obtained for selected adhesives representative of the major types are given.

Caruso, S. V.↗
NASA NTRS1974

Skylab mission planning support through the use of a hybrid simulation

The manner in which a hybrid simulation was used in support of Skylab operations in the area of dynamics and control is described. Simulation results were used in the development of acceptable vehicle maneuvers and in the verification of acceptability when the maneuvers were integrated into daily flight plans. The criterion of acceptability was based on vehicle controllability and the minimization of thruster system propellant usage. A simulation of a representative daily flight plan containing three experimental maneuvers is included, along with thruster attitude control system propellant usage tables which show predicted and actual usage for each mission. The inherent characteristics of quick turnaround and flexibility afforded by the hybrid computer proved invaluable in the operations support required throughout the Skylab mission.

Hammer, M. W.↗
NASA NTRS1974

Impact resistance of hybrid composite fan blade materials

Improved resistance to foreign object damage was demonstrated for hybrid composite simulated blade specimens. Transply metallic reinforcement offered additional improvement in resistance to gelatin projectile impacts. Metallic leading edge protection permitted equivalent-to-titanium performance of the hybrid composite simulated blade specimen for impacts with 1.27 cm and 2.54 cm (0.50 and 1.00 inch) diameter gelatin spheres.

Friedrich, L. A.↗
NASA NTRS1974

Design guidelines for use of adhesives and organic coatings in hybrid microcircuits

A study was conducted to investigate the reliability of organic adhesives in hybrid microcircuits. The objectives were twofold: (1) to identify and investigate problem areas that could result from the use of organic adhesives and (2) to develop evaluation tests to quantify the extent to which these problems occur for commercially available adhesives. Efforts were focused on electrically conductive adhesives. Also, a study was made to evaluate selected organic coatings for contamination protection for hybrid microcircuits.

Caruso, S. V.↗
NASA NTRS1975

Hybrid upper surface blown flap propulsive-lift concept for the quiet short-haul research aircraft

The hybrid upper surface blowing concept consists of wing-mounted turbofan engines with a major portion of the fan exhaust directed over the wing upper surface to provide high levels of propulsive lift, but with a portion of the fan airflow directed over selected portions of the airframe to provide boundary layer control. NASA-sponsored preliminary design studies identified the hybrid upper surface blowing concept as the best propulsive lift concept to be applied to the Quiet Short-Haul Research Aircraft (QSRA) that is planned as a flight facility to conduct flight research at low noise levels high approach lift coefficients, and steep approaches. Data from NASA in-house and NASA-sponsored small and large-scale wind tunnel tests of various configurations using this concept are presented.

Cochrane, J. A.↗
NASA NTRS1975

Hybrid measurement chains for the SAS-C spacecraft

Spacecraft electronic systems usually demand tight packaging. It was this consideration which initially forced us to consider hybrid circuits for the analog signal processing circuits in the Small Astronomy Satellite-C (SAS-C) scientific payload. We gradually discovered that increased reliability, low power consumption, and reduced program costs all followed. This paper will attempt to share our laboratory's first experience with hybrid circuits and indicate those areas which we found to be important.

Goeke, R. F.↗