Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Counter cross-flow evaporator geometries for supercritical organic Rankine cycles

With recent advancements in advanced manufacturing techniques, it is now possible to fabricate complex geometries that take advantage of well known principles of heat transfer. Therefore, unconventional configurations to enhance effectiveness beyond conventional designs can now be considered for practical application. Thermal performance and overall cost of a new design of heat exchangers in counter cross-flow configurations are studied using a simplified but accurate computational method. The new heat exchanger design was introduced and studied previously for a cross-flow configuration by Sabau et al. (2016, 2018). This new design concept uses multi-scale configurations with successive plenums for the working fluid. At the smallest scale the tubes are sized to be equal to the hydraulic entrance length of the inside fluid, in accord with constructal design. With this being said, results indicate that compared to the earlier cross-flow configuration, the counter cross-flow arrangement improves the thermal performance of the heat exchanger by as much as 17% and lowers the total cost by as much as 14%.

42 ENGINEERING↗

Deposit geometry and oxygen concentration spatial variations due to composition change in printed functionally graded components

Functionally graded materials (FGMs) with site specific chemical composition are commonly manufactured by directed energy deposition (DED). Although previous work fabricated an FGM with a compositional variation between a ferritic and austenitic alloy, difficulties arose due to variations in deposit shape with composition change. This problem also occurs for FGMs in literature; however, unlike other cases, the thermophysical properties of these two alloys were similar throughout the build. Here, we investigate the role of chemical composition and surface-active elements on deposit geometry during the manufacture of FGMs by laser DED. Single-track experiments for the relevant FGM compositions are analyzed with results from a well-tested, three-dimensional, transient numerical heat transfer and fluid flow model and thermodynamic calculations. Experiments showed deposit shape varied as a function of composition for constant laser power and scan speed. Thermodynamic analysis indicated that the oxygen solubility in the fusion zone varied significantly for each composition used for the FGM. Numerical modeling revealed that the change in fluid flow caused by Marangoni convection due to dissolved oxygen in the fusion zone were mainly responsible for the changes in deposit shape observed in experiments. Finally, because oxygen can be introduced into the fusion zone through the feedstock as well as the surrounding atmosphere, these findings elucidate a previously unconsidered aspect of process control during DED fabrication of FGMs.

36 MATERIALS SCIENCE↗

Effect of micro-fin tube geometry parameters on evaporator material savings

A Performance Evaluation Criteria (PEC) analysis is presented that explores the influence of the micro-fin tube geometry on the required material volume. The analysis was done using a local flow boiling model, which can quantify the effect of fin parameters and the tube diameter. The PEC was done while requiring that the compared surfaces satisfy the same heat duty and pressure drop. The following tube parameters and ranges were explored: tube diameter (3 mm ≤ D o ≤ 6 mm), fin base thickness (0.12 mm ≤ t bf ≤ 0.29 mm), helix angle (6° ≤ α ≤ 30°), fin apex angle (11° ≤ β ≤ 22°), total number of fins (43 ≤ n f ≤ 70), and the fin height (0.11 mm ≤ e ≤ 0.3 mm). The tube that provided the smallest material requirements within the examined parameter ranges had: D o = 3 mm, t bf = 0.12 mm, α = 6°, β = 11°, n f = 43, and e = 0.3 mm. In general, small D o and t bf and large n f and e provided the best performance and work to minimize the required material volume to provide a given heat duty and pressure drop. The helix and the fin-tip apex angles were found to have very little influence on the performance for the examined range of parameters and angles associated with the lowest production cost should be chosen.

Evaporation↗

Evaluation of Multiple Breathing States Using a Multiple Instance Geometry Approximation (MIGA) in Inverse-Planned Optimization for Locoregional Breast Treatment

Purpose: Although previous work demonstrated superior dose distributions for left-sided breast cancer patients planned for intensity-modulated radiation therapy (IMRT) at deep inspiration breath hold compared with conventional techniques with free-breathing, such techniques are not always feasible to limit the impact of respiration on treatment delivery. This study assessed whether optimization based on multiple instance geometry approximation (MIGA) could derive an IMRT plan that is less sensitive to known respiratory motions. Methods and Materials: CT scans were acquired with an active breathing control device at multiple breath-hold states. Three inverse optimized plans were generated for eight left-sided breast cancer patients: one static IMRT plan optimized at end exhale, two (MIGA) plans based on a MIGA representation of normal breathing, and a MIGA representation of deep breathing, respectively. Breast and nodal targets were prescribed 52.2 Gy, and a simultaneous tumor bed boost was prescribed 60 Gy. Results: With normal breathing, doses to the targets, heart, and left anterior descending (LAD) artery were equivalent whether optimizing with MIGA or on a static data set. When simulating motion due to deep breathing, optimization with MIGA appears to yield superior tumor-bed coverage, decreased LAD mean dose, and maximum heart and LAD dose compared with optimization on a static representation. Conclusions: For left-sided breast-cancer patients, inverse-based optimization accounting for motion due to normal breathing may be similar to optimization on a static data set. However, some patients may benefit from accounting for deep breathing with MIGA with improvements in tumor-bed coverage and dose to critical structures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

On the onset of deformation twinning in the CrFeMnCoNi high-entropy alloy using a novel tensile specimen geometry

Deformation-induced nanoscale twinning is one of the mechanisms responsible for the excellent combination of strength and fracture toughness of the single-phase, face-centered cubic CrMnFeCoNi (Cantor) alloy, especially at cryogenic temperatures. In this work, we use a novel, modified dogbone geometry that allows the sampling of varying stress and strain regions within a single tensile specimen to characterize the onset of twinning in CrMnFeCoNi at 293 K, 198 K and 77 K. Electron backscatter diffraction (EBSD) and backscattered electron (BSE) imaging revealed the presence of deformation nano-twins in regions of the samples that had experienced plastic strains of ~25% at 293 K, ~16% at 198 K, and ~8% at 77 K, which are similar to the threshold strains described by Laplanche et al. ( Acta Mater. 118, 2016, 152–163). From these strains we estimate that the critical tensile stress for the onset of twinning in this alloy is on the order of 750 MPa.

36 MATERIALS SCIENCE↗

An adaptive fast multipole accelerated Poisson solver for complex geometries

Here, we present a fast, direct and adaptive Poisson solver for complex two-dimensional geometries based on potential theory and fast multipole acceleration. More precisely, the solver relies on the standard decomposition of the solution as the sum of a volume integral to account for the source distribution and a layer potential to enforce the desired boundary condition. The volume integral is computed by applying the FMM on a square box that encloses the domain of interest. For the sake of efficiency and convergence acceleration, we first extend the source distribution (the right-hand side in the Poisson equation) to the enclosing box as a $C$ 0 function using a fast, boundary integral-based method. We demonstrate on multiply connected domains with irregular boundaries that this continuous extension leads to high accuracy without excessive adaptive refinement near the boundary and, as a result, to an extremely efficient “black box” fast solver.

97 MATHEMATICS AND COMPUTING↗

Robust Approaches to Handling Complex Geometries with Galerkin Difference Methods

The Galerkin difference (GD) basis is a set of continuous, piecewise polynomials defined using a finite-difference-like grid of degrees of freedom. The one dimensional GD basis functions are naturally extended to multiple dimensions using a tensor product construction on quadrilateral elements. The GD basis can be used to define the solution space for a discontinuous Galerkin finite element discretization of partial differential equations. In this work we propose two approaches to handling complex geometries within this setting: (1) using nonconforming, curvilinear GD elements and (2) coupling affine GD elements with curvilinear simplicial elements. In both cases the (semidiscrete) discontinuous Galerkin method is provably energy stable even when variational crimes are committed. Additionally, for both element types a weight-adjusted mass matrix is used, which ensures that only the reference mass matrix must be inverted. We also present sufficient conditions on the treatment of metric terms for the curvilinear, nonconforming GD elements to ensure that the scheme is both constant preserving and conservative. Numerical experiments confirm the stability results and demonstrate the accuracy of the coupled schemes.

97 MATHEMATICS AND COMPUTING↗

Velocity dependent dislocation drag from phonon wind and crystal geometry

The mobility of dislocations is an important factor in understanding material strength. Dislocations experience a drag due to their interaction with the crystal structure, the dominating contribution at high stress and temperature being the scattering off phonons due to phonon wind. Yet, the velocity dependence of this effect has eluded a good theoretical understanding. In a previous work, dislocation drag from phonon wind as a function of velocity was computed from first principles in the isotropic limit, in part for simplicity, but also arguing that macroscopically, a polycrystalline metal looks isotropic. However, since the single crystal grains are typically a few microns up to a millimeter in size, dislocations travel in single crystals and cross boundaries, but never actually see an isotropic material. In this work we therefore highlight the effect of crystal anisotropy on dislocation drag by accounting for the crystal and slip plane geometries. In particular, we keep the phonon spectrum isotropic for simplicity, but dislocations are modeled according to the crystal symmetry (bcc, fcc, hcp, etc.). We then compare to the earlier purely isotropic results, as well as to experimental data and MD simulations where they are available.

36 MATERIALS SCIENCE↗

Effect of build geometry on the microstructural development of 316L parts produced by additive manufacturing

Highlights: • Stainless steel ribs were created via direct metal laser sintering to investigate microstructural effect of part design. • EBSD confirmed the presence of large elongated grains in the center of the part, with preferred orientation. • Small grains at the rib surface were found to grow towards the center of the rib with random orientation. • By changing rib thickness and build angle varying texture was observed in the final products. • Large intragranular misorientations were observed in all samples. - Abstract: Additive manufacturing (AM) technology has shown great potential in manufacturing complex products, such as lattice structures without extensive tooling. The focus of this study was to understand the effect of the part geometry on the resulting microstructure. Direct metal laser sintering was used for fabrication of ribs with thicknesses varying between 0.2 and 3.0 mm as well as inclined ribs the with build angles of 30° and 45°. The investigation showed that grains were growing in an epitaxial manner parallel to the building direction. The large elongated grains had a preferential orientation, resulting from the temperature gradient. Additionally, it was found that small grains had formed close to the part surface which were inclined towards the center of the rib. In contrast to the elongated grains, they had a random orientations. The results also indicated that at build angles below 45°, the formed microstructure consisted of the large grains elongated in the building direction. For the used process parameters, the critical part thickness to avoid large elongated grains was found to be about 0.4 mm. These findings allowed us to establish the basics for design rules when it comes to thin wall structures.

36 MATERIALS SCIENCE↗

Investigation of grain-boundary geometry and pores morphology in dense and porous cubic zirconia polycrystals

Highlights: • Cubic zirconia sinters were investigated in three dimensions using dual-beam FEGSEM. • The 3D-EBSD technique was successfully applied to non-conductive ceramics. • New sample preparation approach to automated 3D-EBSD was proposed. • Grain boundary microstructures were reconstructed from inverse pole figure maps. • Pore microstructures were reconstructed from image quality maps. - Abstract: Three-dimensional electron backscatter diffraction technique was used for the visualization of grain boundary geometry and pore morphology in cubic zirconia. A set of four samples sintered under different conditions was investigated. Specimens which were characterized by energy dispersive spectroscopy and X-ray diffraction were entirely composed of cubic phase. Investigations of boundaries and pore structures were carried out in a dual-beam scanning electron microscope. For each sample, a volume of 1000 μm{sup 3} was investigated. The analysis of grain boundary networks reconstructed from inverse pole figure maps revealed a strong dependence between grain boundary density and sample preparation parameters. Sintering also affects the size and distribution of pores. The total number of grains analyzed varied from 17 to 357 and the calculated volume of cavities from 0.01% to 21%. This paper shows the application of three-dimensional crystallographic orientation analysis to characterize the microstructure of yttria stabilized zirconia ceramics.

36 MATERIALS SCIENCE↗

Enabling a novel approach to a controlled fabrication of 1D crystalline nanowires on suspended microstructures of arbitrary geometries using two direct-writing technologies

Recent progresses in additive manufacturing have inspired new technologies, such as direct laser writing technique, based on two-photon polymerization (2 PP), which complements and further enriches the nanofabrication tools portfolio. Here, we combine 2 PP and our mask-free scanning probe assisted ‘direct-write patterning’ (DWP) method to allow for: a) the fabrication of micro-bridge structures with sub-micrometer resolution, b) selective synthesis of crystalline ZnO nanowires at predefined locations, respectively. This synergistic approach enables cantilever probe patterning of catalysts directly on suspended micro-bridges for in-situ CVD growth of nanoscale material, in a templated manner. The study reported here represents the first proof-of-concept experiments demonstrating versatile and scalable methodology, which can be applied and straightforwardly extended to grow a variety of other nanomaterials, in a controlled and selective fashion, on freestanding micro/nanoscale structures, whose size and geometry can be conveniently varied via templating of sacrificial 2 PP polymeric scaffolds. Furthermore, the demonstration of the possibility to integrate this new approach with the conventional lithography techniques provides a step forward to the development of the novel class of hybrid polymer-silicon-1D or -2D materials, and systems. The quality of the produced ZnO nanowire assemblies was assessed using several physical characterization methods.

36 MATERIALS SCIENCE↗

Magnetic charge and geometry confluence for ultra-low forward voltage diode in artificial honeycomb lattice

We report spin diode is important prerequisite to practical manifestation of spin electronics. Yet, a functioning magnetic diode at room temperature is still illusive. Here, we reveal diode-type phenomena due to magnetic charge mediated conduction in artificial honeycomb geometry, made of concave shape single domain permalloy element. We find that honeycomb lattice defies symmetry by populating vertices with low and high multiplicity magnetic charges, causing asymmetric magnetization, in applied current of opposite polarity. High multiplicity units create highly resistive network, thereby inhibiting magnetic charge dynamics propelled electrical conduction. However, practical realization of this effect requires modest demagnetization factor in constituting element. Concave structure fulfills the condition. Subsequently, magnetic diode behavior emerges across broad thermal range of T = 40 K–300 K. The finding is a departure from the prevailing notion of spin-charge interaction as the sole guiding principle behind spintronics. Consequently, a new vista, mediated by magnetic charge interaction, is envisaged for spintronic research.

36 MATERIALS SCIENCE↗

A virtual Frisch-grid geometry-based CZT gamma detector for in-field radioisotope identification

Here, we present a Virtual Frisch-Grid geometry-based CZT gamma detector developed for identifying different radioisotopes over an energy range from a few keV up to 2 MeV, and useful for efficient characterization of CZT crystals. The detector is built with a 3 x 3 matrix of CZT crystals, each measuring approximately 6 mm x 6 mm x 15 mm. The charge generated within the sensor’s active volume is read out via an anode connected directly to the AVG3_Dev integrated circuit. A current signal induced by charge drift is collected on side pads of the crystals, enabling reconstruction of a 3D interaction position. This paper discusses the design, development, and performance of the standalone, mobile detector system, which integrates the AVG3_Dev readout IC developed at Brookhaven National Laboratory, a high-speed FPGA-based with per-channel digital signal processing, and embedded system capabilities. The device is compact, battery-powered, and supports wireless data streaming, making it suitable for field operations for radioisotope identification.

47 OTHER INSTRUMENTATION↗

Geometry and Dynamics in Heavy-Ion Collisions Seen by the Femtoscopy in the STAR Experiment

The geometry and the dynamics of the particle-emitting source in high-energy heavy-ion collisions can be inferred via femtoscopy measurement. Two-particle correlations at small relative momentum exploit quantum statistics and the final-state interactions which allow one to study the space-time characteristics of the source of the order of 10-15 m and 10-23 s, respectively. The RHIC Beam Energy Scan (BES) program covers a significant part of the QCD Phase Diagram using collisions of Au nuclei at eight beam energies in the range from 7.7 to 200 GeV, covering the baryonrich region, which can be studied via baryon femtoscopy. Thus, two-baryon measurements together with two-meson and meson-baryon correlations provide complementary information about the source characteristics. In this proceedings, the STAR preliminary results on femtoscopic observables of various particle combinations of protons, pions and kaons from Au+Au collisions at BES energies are presented. Determining how the properties of the particle-emitting source depend on collision energy is an important step towards understanding the physics of heavy-ion collisions. The BES program provides the possibility to study the energy dependence of the source sizes for various collision centralities. In addition to the source size, the measurements of non-identical particle combinations provide information about space-time asymmetries in emission process.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High-speed three-dimensional shape measurement using geometry-constraint-based number-theoretical phase unwrapping

In this study, we propose a high-speed three-dimensional (3-D) shape measurement technique for dynamic scenes using geometry-constraint-based number-theoretical phase unwrapping. As a classical algorithm for temporal phase unwrapping (TPU), the number-theoretical approach is suitable for the binary defocusing fringe projection system since it can retrieve an absolute phase without using low-frequency fringe patterns. However, the conventional number-theoretical TPU approach cannot provide sufficient stability to unwrap a high-frequency phase since it requires the two fringe frequencies to be coprime within the global range of the projector coordinate. In contrast, using low-frequency fringe patterns tends to make phase unwrapping more reliable, but at the expense of the measurement precision. By introducing depth constraint into the traditional number-theoretical TPU, we only need to eliminate the phase ambiguity of each pixel within a small period range defined by the depth range, which means that our method just requires the two fringe frequencies to be coprime within the local period range instead of the conventional global range. Due to the reduction of fringe order candidates and the unambiguous phase range, the reliability of phase unwrapping can be significantly improved compared with the traditional number-theoretical TPU approach even when high-frequency fringe patterns are used. The proposed method has been successfully implemented on a high-frame-rate fringe projection system, achieving high-precision, robust, and absolute 3-D shape measurement at 3333 frames per second.

42 ENGINEERING↗

Design of a radial collimator for the SEQUOIA direct geometry chopper spectrometer

The SEQUOIA direct geometry chopper spectrometer at the Spallation Neutron Source is considering acquisition of a radial collimator. We present here Monte-Carlo calculations examining the proposed collimator's performance. Through comparison of calculations with and without sample environments in place, one can determine appropriate parameters to use in the collimator design. The numerical results provide enough detail to determine the angular collimation for the radial collimator.

47 OTHER INSTRUMENTATION↗

Geometry-based, Gaussian profile model for optical knife-edge displacement sensor

This article describes an analytical model for the well-known optical knife-edge displacement sensor that predicts the relationship between the knife-edge displacement and photointerrupter output. The model includes: 1) the geometry of a rectangular knife-edge profile penetrating a circular laser beam perpendicular to the beam axis; and 2) the Gaussian intensity profile for the beam cross-section. A comparison between the model predictions and measured photointerrupter for a linear range of knife-edge displacements is provided. It is shown that good agreement is obtained without model calibration.

42 ENGINEERING↗

An Engineered Switch in T Cell Receptor Specificity Leads to an Unusual but Functional Binding Geometry

Utilizing a diverse binding site, T cell receptors (TCRs) specifically recognize a composite ligand comprised of a foreign peptide and a major histocompatibility complex protein (MHC). To help understand the determinants of TCR specificity, we studied a parental and engineered receptor whose peptide specificity had been switched via molecular evolution. Altered specificity was associated with a significant change in TCR-binding geometry, but this did not impact the ability of the TCR to signal in an antigen-specific manner. The determinants of binding and specificity were distributed among contact and non-contact residues in germline and hypervariable loops, and included disruption of key TCR-MHC interactions that bias αβ TCRs toward particular binding modes. Sequence-fitness landscapes identified additional mutations that further enhanced specificity. Furthermore, our results demonstrate that TCR specificity arises from the distributed action of numerous sites throughout the interface, with significant implications for engineering therapeutic TCRs with novel and functional recognition properties.

59 BASIC BIOLOGICAL SCIENCES↗