SEARCH · Engineering Papers

Results for “gas target”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Extending the low-recycling, flat temperature profile regime in the lithium tokamak experiment-β (LTX-β) with ohmic and neutral beam heating

Abstract Recent experiments in the lithium tokamak experiment- β (LTX- β ) have extended the duration, performance, operating conditions, and diagnosis of the flat-temperature profile, low-recycling regime first observed in LTX. As expected, Li retains hydrogen and suppresses edge neutral cooling, allowing increased edge electron temperature, roughly equal to the core T e . Flat temperature profiles had been obtained transiently in LTX, as the plasma density decayed following the cessation of edge gas puffing. Careful control over the fueling in LTX- β has now been shown to sustain the flat T e profile and hot edge unique to the low-recycling regime for multiple confinement times in high performance discharges with decaying or steady density. With low density, the flat T e profile is also seen to extend into the scrape-off layer. Neutral beam heating is observed in target discharges with relatively flat electron temperature profiles ( T edge ∼ T core /2), though beam heating is stronger in discharges with higher fueling, higher density, and depressed edge T e . Beam heating produces additional peaking of the T e profile, without degradation of the energy confinement time. Neutral beam heating of target discharges with relatively flat electron temperature profiles similarly results in broad beam heated temperature profiles. Energy confinement in LTX- β generally compares favorably to ohmic and H-mode scalings, frequently exceeding them by factors of 2–4. New and improved diagnostics in LTX- β enable better characterization of this unique regime, including measurements of ion temperature and high field side Thomson scattering profiles. As an initial step toward characterizing turbulence with no T e gradient and roughly equal density and pressure gradient, core fluctuation spectra have been measured in peaked T e discharges using far-forward scattering and fluctuation reflectometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1990

Multiwavelength studies of southern early type galaxies

Observations from an in progress program to study early type galaxies are presented. International Ultraviolet Explorer (IUE) spectra of the southern galaxies NGC 1326 and 1808 are presented and compared to IUE archival spectra of four galaxies of approximately similar morphological type. The targets were selected on the basis of their infrared astronomy satellite emission, peculiarities in their dust structure as revealed from charge coupled device frames and the presence of H I from 21 cm data. Preliminary results show large differences in stellar populations, and the presence of early spectral type stars are correlated with UV extinction and IR excess. Interpretation of the data is presented, discussing the correlations between extinction, gas content and stellar populations.

Danks, A. C.↗

NASA NTRS1994

Techniques for in situ collection and measurement of volatiles released during hypervelocity impact

The capability of the gas capture cell to collect particles and semivolatile species which were released during impact is examined. The proposed Comet Coma Sample Return (CCSR) payload contains a variety of instrumentation for characterizing and collecting cometary dust. In this suite of instruments the Gas Capture Cell (GCC) is unique in that it not only collects the vaporization products resulting from the dust particle impacts, but also provides chemical characterization information prior to return of the dust particles for analysis on Earth. The GCC provides near real-time characterization of the volatile species, such as low- and medium-molecular-weight organic compounds that evolve from dust particles on impact with metal targets. Instrument sensitivity is sufficient for analyzing the volatile impact products resulting from single, individual dust particles. This capability will enable characterization of near-pristine dust particles, including the CHON particles, to be performed at a level not previously possible. Its design concept, operation and performance are detailed.

Heppner, R. A.↗

DOE OSTI2020

TeraChem: A graphical processing unit-accelerated electronic structure package for large-scale ab initio molecular dynamics

TeraChem was born in 2008 with the goal of providing fast on-the-fly electronic structure calculations to facilitate ab initio molecular dynamics studies of large biochemical systems such as photoswitchable proteins and multichromophoric antenna complexes. Originally developed for videogaming applications, graphics processing units (GPUs) offered a low-cost parallel computer architecture that became more accessible for general-purpose GPU computing with the release of CUDA in 2007. The evaluation of the electron repulsion integrals (ERIs) is a major bottleneck in electronic structure codes and provides an attractive target for acceleration on GPUs. Thus, highly efficient routines for evaluation of and contractions between the ERIs and density matrices were implemented in TeraChem. Here, electronic structure methods were developed and implemented to leverage these integral contraction routines, resulting in the first quantum chemistry package designed from the ground up for GPUs. This GPU acceleration makes TeraChem capable of performing large-scale ground and excited state calculations in the gas and condensed phase. Today, TeraChem's speed forms the basis for a suite of quantum chemistry applications, including optimization and dynamics of proteins, automated and interactive chemical discovery tools, and large-scale nonadiabatic dynamics simulations.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2023

Framework for Greenhouse Gas Emissions Reduction Planning: Building Portfolios

The goal of this Framework for greenhouse gas (GHG) emissions reduction planning (ERP) is to provide guidance to organizations seeking to reduce GHG emissions for their building portfolios and vehicle fleets. The process described in this framework helps organizations develop an actionable plan that prioritizes emissions reduction measures, identifies solutions, and lays out a phased pathway to achieve deep emissions reductions The plan aims to result in the achievement of Scope 1 and 2 GHG emissions reduction targets, in alignment with goals set within the U.S. Department of Energy’s (DOE’s) Better Climate Challenge, as well as longer term emissions reduction goals.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Impact of Materials Properties on Higher-Temperature Engine Operation

Here, we examine the effects on materials temperatures and engine efficiency via simulations of engines operating at temperatures which exceed the thermal limits of today’s materials. Potential focus areas include high-speed, high-load operation (in the fuel-enrichment zone) as well as conditions of selective cooling at lower speeds and loads. We focus on a light-duty DISI and a heavy-duty CI engine using GT-Power. Temperature distributions within the head, block, piston, and valves were obtained from 3D FEA simulations coupled with 1D GT-Power representations of the engine’s gas flow and combustion regions. We use experimentally measured thermal properties of current commercial alloys for specific engine components, as well as candidate developmental alloys with improved temperature tolerance, to gauge the effects of materials properties on engine performance, particularly focusing on operating areas where materials which can withstand higher temperatures can enable intensified combustion conditions and increased specific output. The outcome of this work is guidance on materials selection targets and benefits as OEMs meet engine-performance needs in the coming decades, to include Class 8 line-haul freight vehicles with reduced emissions, as well as design of future near net zero-carbon light-duty range extenders for more rapid electrification of medium- and heavy-duty vehicles.

36 MATERIALS SCIENCE↗

NASA NTRS1999

The Effects of Nearby Clusters of Galaxies on the Microwave Background Radiation

This project proposed to use the COBE (Cosmic Background Explorer) DMR sky-maps to measure the anisotropies introduced into the microwave background radiation by the Sunyaev-Zel'dovich and Rees-Sciama effects of nearby clusters and superclusters of galaxies. We intended to seek these effects by making maps of the best-fit anisotropies on particular angular scales and comparing the apparent anisotropies near target clusters and superclusters with the statistical noise and sky variance. The locations of the clusters and superclusters were to be found using HEAO-1 (High Energy Astronomy Observatory) A2 and Einstein X-ray maps. Checks against biases were to be made using radio and X-ray sky-maps as guides to the properties of the clusters and superclusters. Any signals detected would have implications for the gas properties and baryonic masses of clusters and superclusters. The scientific background, project activities and references to published papers are included.

Birkinshaw, M.↗

NASA NTRS2013

Chemical Enrichment and Physical Conditions in IZw18*

Low-metallicity star-forming dwarf galaxies are prime targets to understand the chemical enrichment of the interstellar medium. The H I region contains the bulk of the mass in blue compact dwarfs, and it provides important constraints on the dispersal and mixing of heavy elements released by successive star-formation episodes. The metallicity of the H I region is also a critical parameter to investigate the future star-formation history, as metals provide most of the gas cooling that will facilitate and sustain star formation. Aims. Our primary objective is to study the enrichment of the H I region and the interplay between star-formation history and metallicity evolution. Our secondary obje ctive is to constrain the spatial- and time-scales over which the HI and H II regions are enriched, and the mass range of stars responsible for the heavy element production. Finally, we aim to examine the gas heating and cooling mechanisms in the H I region. Methods. We observed the most metal-poor star-forming galaxy in the Local Universe, I Zw 18, with the Cosmic Origin Spectrograph onboard Hubble. The abundances in the neutral gas are derived from far-ultraviolet absorption-lines (H I, CIII, CIIi*, N I, OI,...) and are compared to the abundances in the H II region. Models are constructed to calculate the ionization structure and the thermal processes. We investigate the gas cooling in the HIi region through physical diagnostics drawn from the fine-structure level of C+. Results. We find that H I region abundances are lower by a factor of approx 2 as compared to the H II region. There is no differential depletion on dust between the H I and H II region. Using sulfur as a metallicity tracer, we calculate a metallicity of 1/46 Z(solar) (vs. 1/31 Z(solar) in the H II region). From the study of the C/O, [O/Fe], and N/O abundance ratios, we propose that C, N, O, and Fe are mainly produced in massive stars. We argue that the H I envelope may contain pockets of pristine gas with a metallicity essentially null. Finally, we derive the physical conditions in the H I region by investigating the C II* absorption line. The cooling rate derived from C II* is consistent with collisions with H(sup 0) atoms in the diffuse neutral gas. We calculate the star-formation rate from the CII* cooling rate assuming that photoelectric effect on dust is the dominant gas heating mechanism. Our determination is in good agreement with the values in the literature if we assume a low dust-to-gas ratio (approx 2000 times lower than the Milky Way value).

far-ultraviolet absorption-lines↗

NASA NTRS2013

Environmentally Friendly Rotorcraft Concepts: 2011-2014: US/France MoA Helicopter Aeromechanics - Task 5

Motivation: Greenhouse gas concentrations have increased well beyond their pre-industrial levels due to human activities; Aircraft emissions are becoming regulated in industrialized nations, so future rotorcraft will need to be designed for minimal environmental impact. Objectives: Determine suitable metrics to measure environmental impact of rotorcraft, focusing first on air pollution; Integrate performance metrics with rotorcraft design codes; Generate rotorcraft designs with minimal environmental impact. Outcomes: Obtain an understanding of how targeting reduced emissions affects the rotorcraft design process; Advance the capability of existing rotorcraft design tools to include environmental performance metrics. Tools: Evaluation and predesign - NDARC (NASA Design and Analysis of Rotorcraft) and CREATION (Concepts of Rotorcraft Enhanced Assessment Through Integrated Optimization Network); Flight simulation - CAMRAD II (Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics) and HOST (Helicopter Overall Simulation Tool).

Environmentally Friendly↗

NASA NTRS2019

The Combustion Product Monitor instrument for the spacecraft fire safety demonstration project

The Combustion Product Monitor (CPM) instrument is a six-channel tunable laser absorption spectrometer capable of measuring ambient gas-phase concentrations of CO, HCl, HCN, HF, CO2, and O2 in spacecraft environments. Monitoring of these compounds can provide early warning detection of combustion events and can also facilitate safe post-fire cleanup. Here, we will describe the development of a CPM instrument optimized for operation as part of the Spacecraft Fire Safety Demonstration (Saffire) Project. As part of Saffire, the CPM instrument will measure concentrations of the target gases during low-gravity, reduced pressure oxidative pyrolysis of relevant test materials aboard a transfer vehicle returning from low Earth orbit. We will describe the CPM instrument design, absorption line selection,theoretical and experimental detection limits, and environmental testing.

Briggs, Ryan M.↗

DOE OSTI2026

ARC disruption physics and strategy

Commonwealth Fusion Systems (CFS) plans to operate a tokamak power plant called ARC in the early 2030s. Tokamak plasmas have stability limits that, if crossed, lead to a rapid termination of the plasma, referred to as a disruption. Disruptions pose a melt risk to the first wall resulting from thermal and non-thermal particle heat fluxes, and an electromagnetic loading risk on all metal components within the equilibrium coils. A comprehensive set of models is used herein to provide an assessment of both mitigated and unmitigated ARC disruption loads. A preliminary massive gas injection system is baselined and a runaway electron mitigation coil option is proposed to close possible gaps in the baseline. It is predicted that all ARC disruption loads are within a factor of 2 of the disruption loads in SPARC, a tokamak presently under construction by CFS, and therefore SPARC provides an opportunity to calibrate models, test solutions and inform the design of ARC. The goal for ARC is disruption-free operation, however, the pragmatic design target is to withstand one mitigated disruption per day, and to restart the plasma following mitigation in tens of seconds without interrupting the power output. Unmitigated disruptions must be rare, and experience with unmitigated disruption impacts in SPARC will better define what rare means. The implications of this strategy for plasma disruptivity and disruption prediction are discussed, and operating the ARC scenario on SPARC is expected to refine the ARC final design and operational plan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Gas-phase preparation of the dibenzo[ e,l ]pyrene (C 24 H 14 ) butterfly molecule via a phenyl radical-mediated ring annulation

A high temperature phenyl-mediated addition–cyclization–dehydrogenation mechanism to form peri-fused polycyclic aromatic hydrocarbon (PAH) derivatives—illustrated through the formation of dibenzo[e,l]pyrene (C 24 H 14 )—is explored through a gas-phase reaction of the phenyl radical (C 6 H 5 ˙) with triphenylene (C 18 H 12 ) utilizing photoelectron photoion coincidence spectroscopy (PEPICO) combined with electronic structure calculations. Low-lying vibrational modes of dibenzo[e,l]pyrene exhibit out-of-plane bending and are easily populated in high temperature environments such as combustion flames and circumstellar envelopes of carbon stars, thus stressing dibenzo[e,l]pyrene as a strong target for far-IR astronomical surveys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Near-Net-Shape HIP Manufacturing for sCO2 Turbomachinery Cost Reduction

sCO2 turbomachinery that operates above 650°C requires the use of γ' strengthened Ni-based superalloys, leading to high cost and barrier of market adoption. Near-net-shape (NNS) HIP manufacturing with 282® alloy powder is being developed for sCO2 turbine components, with a significant estimated cost reduction. Tensile, creep, low cycle fatigue properties of argon gas atomized and plasma atomized powders were evaluated and compared to sand cast HAYNES® 282®. While tensile strength and fatigue life outperformed sand cast material, a 10~25% debit in the creep stress capability was observed due to the fine grain size and presence of prior particle boundaries (PPBs). Finite element model calibrated by powder rheological properties accurately predicted the nonuniform shrinkage during HIP, providing HIP tooling design to achieve the target dimension. A 20 lbs. turbine nozzle ring was successfully demonstrated within 0.01 inch dimensional tolerance at the vanes. A 1700lbs. turbine casing with complex internal struts and manifolds was also demonstrated being close to the target dimension.

14 SOLAR ENERGY↗

NASA NTRS2021

Remote Sensing of Wetland Area Loss and Gain in the Western Barataria Basin (Louisiana, U.S.A.) since Hurricane Katrina

The goal of this study was to analyze the recent record of Landsat satellite imagery to better understand spatial patterns and infer processes of change in marshland vegetation cover in coastal Louisiana wetlands. The study area covered subbasins of the western Barataria Basin near the Bayou Lafourche in southeastern Louisiana. Bayou Lafourche's estuaries have seen some of the highest rates of wetland conversion to open water of any coastal zone in the United States. The Landsat Normalized Difference Water Index (NDWI) was used in this study to map changes in land/water fractions at a 30-m pixel resolution between October 2005 (post-Katrina) and October 2018. Validation boat surveys were conducted in July 2020 to visually verify the presence or absence of (>1 m) emergent vegetation growing on marshlands across several subbasins, with photographs collected at more than 150 target locations along the route. Based on NDWI change, a total of 42.3 km2 was estimated to fall into the category of wetland loss since 2005. The leading subbasins for these recent wetland-to-water conversions made up most of the southwestern portion of the study area just north of Port Fourchon. The consistently low distance detected between the majority of wetland loss cells and locations of historical oil and gas wells implies that effects of well drilling and extraction have had a continuing negative impact on marshland degradation in the basin. Conversely, a total of 34 km2 was estimated to fall into the category of recent wetland gain, with much of the new vegetation growth verified to have been restored within several shoreline protection and dredging projects. It was concluded that the positive contributions made by such shoreline enhancement and marshland nourishment projects in Lafourche Parish to offset wetland losses over the past 15 years should not be underestimated.

Remote Sensing↗

NASA NTRS2022

Intrinsic Lyα Profiles of High-velocity G, K, and M Dwarfs

Observations of HILymanα, the brightest UV emission line of late-type stars, are critical for understanding stellar chromospheres and transition regions, modeling photochemistry in exoplanet atmospheres, and measuring the abundances of neutral hydrogen and deuterium in the interstellar medium. Yet Lyαobservations are notoriously challenging owing to severe attenuation from interstellar gas, hindering our understanding of this important emission line’s basic morphology. We present high-resolution far- and near-UV spectroscopy of five G, K, and M dwarfs with radial velocities large enough to Doppler-shift the stellar Lyαemission line away from much of the interstellar attenuation, allowing the line core to be directly observed. We detect self-reversal in the Lyαemission-line core for all targets, and we show that the self-reversal depth decreases with increasing surface gravity. Mg II self-reversed emission-line profiles provide some useful information to constrain the Lyαline core, but the differences are significant enough that Mg II cannot be used directly as an intrinsic Lyαtemplate during reconstructions. We show that reconstructions that neglect self-reversal could overestimate intrinsic Lyαfluxes by as much as 60%–100% for G and K dwarfs and 40%–170% for M dwarfs. The five stars of our sample have low magnetic activity and subsolar metallicity; a larger sample size is needed to determine how sensitive these results are to these factors.

Allison Youngblood↗

NASA NTRSDate not supplied

Developmental Hardware Testing Results and Forward Plans for the Spacecraft Water Impurity Monitor (SWIM) Organic Water Module (OWM)

We present testing results for developmental hardware of the Spacecraft Water Impurity Monitor (SWIM) Organic Water Module (OWM). SWIM-OWM will monitor spacecraft potable water and system water for trace organic contaminants. The system will detect and identify the specific organic chemical that makes up a given total organic carbon reading. We have built a first development unit (1DU) for SWIM-OWM, which directly injects aqueous water samples and detects chemicals with both a thermal conductivity detector and mass spectrometer sensor. The gas chromatography mass spectrometer (GCMS) system that comprises SWIM-OWM draws on the success of ISS-proven mass spectrometer hardware, and the demonstration of GCMS detection of trace organic contaminants in ISS cabin air. SWIM-OWM benefits from the excellent sensitivity and specificity afforded by GCMS. We have demonstrated detection of a set of chemicals relevant to both crew health and performance as well as system monitoring; these target chemicals range from light, volatile organics such as acetone and ethanol, to heavier, very non-volatile compounds such as dimethyl sulfone and o-phthalaldehyde. Direct aqueous injection was chosen for the general applicability of the technique to clean water sampling and to preclude sample pre-processing, which facilitates an on-line implementation of the SWIM-OWM when deployed in a spacecraft or habitation module. A specific advantage of direct aqueous injection when coupled with appropriate methods is that both the light, volatile organics and heavier non-volatiles can be detected from a single injection, in a single chromatogram. Results from 1DU testing will be discussed, and forward plans will be outlined for continued maturation of SWIM-OWM with the goal of implementing a technology demonstration for the purposes of maturing the engineering design and operations in an environment relevant to NASA’s future goals of exploring and setting up habitation on the Moon and Mars.

Water Monitoring↗

NASA NTRSDate not supplied

Developmental Hardware Testing Results and Forward Plans for Spacecraft Water Impurity Monitor (SWIM) Organic Water Module (OWM)

Water Monitoring↗

DOE OSTI2020

High Temperature Gas Sensor for Coal Combustion System

Robust gas sensors that offer real-time feedback about combustion in coal-fired power plants promise greater energy efficiency with fewer harmful emissions while also improving the bottom line for power generators. Currently, no technology meets this objective. Therefore, the objectives of this project are to develop an accurate, robust, reliable, high temperature sensor offering near real-time feedback to plant operators using a novel catalytic/non-catalytic sensor design to detect target gases available for oxidization. Such a sensor would inform power plant operators how to adjust the amount of fuel and air for an optimal performance.

01 COAL, LIGNITE, AND PEAT↗