Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Error localization in RHIC by fitting difference orbits

The presence of realistic errors in an accelerator or in the model used to describe the accelerator are such that a measurement of the beam trajectory may deviate from prediction. Comparison of measurements to model can be used to detect such errors. To do so the initial conditions (phase space parameters at any point) must be determined which can be achieved by fitting the difference orbit compared to model prediction using only a few beam position measurements. Using these initial conditions, the fitted orbit can be propagated along the beam line based on the optics model. Measurement and model will agree up to the point of an error. The error source can be better localized by additionally fitting the difference orbit using downstream BPMs and back-propagating the solution. If one dominating error source exist in the machine, the fitted orbit will deviate from the difference orbit at the same point.

43 PARTICLE ACCELERATORS↗

System and method employing a self-organizing map load feature database to identify electric load types of different electric loads

A method identifies electric load types of a plurality of different electric loads. The method includes providing a self-organizing map load feature database of a plurality of different electric load types and a plurality of neurons, each of the load types corresponding to a number of the neurons; employing a weight vector for each of the neurons; sensing a voltage signal and a current signal for each of the loads; determining a load feature vector including at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the loads; and identifying by a processor one of the load types by relating the load feature vector to the neurons of the database by identifying the weight vector of one of the neurons corresponding to the one of the load types that is a minimal distance to the load feature vector.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

An Evaluation of the Environmental Impact of Different Commercial Supermarket Refrigeration Systems Using Low Global Warming Potential Refrigerants

Commercial refrigeration systems consumed 1.21 Quads of primary energy in 2010 and are known to be a major source for refrigerant charge leakage into the environment. Thus, it is important to study the environmental impact of commercial supermarket refrigeration systems and improve their design to minimize any adverse impacts. The system s Life Cycle Climate Performance (LCCP) was presented as a comprehensive metric with the aim of calculating the equivalent mass of carbon dioxide released into the atmosphere throughout its lifetime, from construction to operation and destruction. In this paper, an open source tool for the evaluation of the LCCP of different air-conditioning and refrigeration systems is presented and used to compare the environmental impact of a typical multiplex direct expansion (DX) supermarket refrigeration systems based on three different refrigerants as follows: two hydrofluorocarbon (HFC) refrigerants (R-404A, and R-407F), and a low global warming potential (GWP) refrigerant (N-40). The comparison is performed in 8 US cities representing different climates. The hourly energy consumption of the refrigeration system, required for the calculation of the indirect emissions, is calculated using a widely used building energy modeling tool (EnergyPlus). A sensitivity analysis is performed to determine the impact of system charge and power plant emission factor on the LCCP results. Finally, we performed an uncertainty analysis to determine the uncertainty in total emissions for both R-404A and N-40 operated systems. We found that using low GWP refrigerants causes a considerable drop in the impact of uncertainty in the inputs related to direct emissions on the uncertainty of the total emissions of the system.

LCCP↗

Primary Energy Efficiency Analysis of Different Separate Sensible and Latent Cooling Techniques

Separate Sensible and Latent cooling (SSLC) has been discussed in open literature as means to improve air conditioning system efficiency. The main benefit of SSLC is that it enables heat source optimization for the different forms of loads, sensible vs. latent, and as such maximizes the cycle efficiency. In this paper I use a thermodynamic analysis tool in order to analyse the performance of various SSLC technologies including: multi-evaporators two stage compression system, vapour compression system with heat activated desiccant dehumidification, and integrated vapour compression with desiccant dehumidification. A primary coefficient of performance is defined and used to judge the performance of the different SSLC technologies at the design conditions. Results showed the trade-off in performance for different sensible heat factor and regeneration temperatures.

Primary Energy Efficiency↗

Method and system employing finite state machine modeling to identify one of a plurality of different electric load types

A system is for a plurality of different electric load types. The system includes a plurality of sensors structured to sense a voltage signal and a current signal for each of the different electric loads; and a processor. The processor acquires a voltage and current waveform from the sensors for a corresponding one of the different electric load types; calculates a power or current RMS profile of the waveform; quantizes the power or current RMS profile into a set of quantized state-values; evaluates a state-duration for each of the quantized state-values; evaluates a plurality of state-types based on the power or current RMS profile and the quantized state-values; generates a state-sequence that describes a corresponding finite state machine model of a generalized load start-up or transient profile for the corresponding electric load type; and identifies the corresponding electric load type.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Experimental Investigation of Friction and Wear Behavior of 304L Stainless Steel Sliding Against Different Counterface in Dry Contact

In this study, friction and wear behavior of 304L stainless steel sliding against different ball counterface under dry contact was investigated. Tests were conducted using a ball-on-flat contact configuration in reciprocating sliding with 440C stainless steel, Al alloy (2017) and bronze ball counterfaces under different loads. Detailed surface analysis was also done using 3-D profilometry technique and optical microscopy in order to determine wear mechanism and dimension. All the pairs exhibited initial rapid increase in coefficient of friction after which a variety of friction behavior, depending on the ball counterface, was observed. The flat and the ball counterface in 304L stainless steel-440C stainless steel pair showed wear that was proportional to applied load. In both 304L stainless steel-Al alloy (2017) and 304L stainless steel-bronze pairs, ball samples showed severe wear that was proportional to the applied load while material transfer from the different balls occurred in the flat. The study concluded that friction and wear were not material properties but a kind of responses that characterize a pair of surfaces in contact undergoing relative motion.

Olofinjana, Bolutife↗

Large-Scale Adoption of Self-Synchronized Universal Droop Controller-Based Inverters to Enable Ancillary Services for Different Modes of Distribution System Operations

This work proposes the large-scale adoption of self-synchronized universal droop controller (SUDC)-based inverters to enable ancillary services for different modes of distribution system operations. The IEEE 123 bus system was modeled on a real-time simulator to study the performance of large-scale adoption of SUDC inverters in a distribution system. The resulting data collected shows that the voltage and the frequency were regulated within ranges, such as less than 5% for voltage and less than 0.5% for frequency, under different load variations and grid operations. Also, the black start was achieved within 0.4 s without any voltage overshoot. Through the simulation and validation on a small microgrid and the IEEE 123 bus distribution system, it can be concluded that the SUDC was successfully adopted to regulate the voltage and the frequency within the given ranges, and black start achieved within 1 s without voltage overshoot for different modes of distribution system operations.

14 SOLAR ENERGY↗

Differences in total stem value when merchandizing with a tracked processor versus a knuckle–boom loader in Pinus taeda

Using tracked processors over knuckle–boom loaders to increase total value per tree when merchandizing timber on the landing has become a topic of interest in the southeastern region of the United States. This study compared merchantability values, product classes, and product weights of loblolly pine (Pinus taeda) for both machines to determine if there was a significant difference between machines when processing the same tree. In order to process the same tree twice, the chains from the tracked processor had to be removed from the bottom saw bar. This allowed the processor to simulate the merchandising process without actually marking or cutting the tree for a more realistic comparison. Data were analyzed using paired t–tests and two–way ANOVA models. Results depicted that when diameter and total lengths are visually estimated by the knuckle–boom loader. A significant difference in value occurs, however, once diameter and total length are modified to match the tracked processors for more accurate measurements, no difference in value was seen. Here, these results demonstrate that until mill specifications become more stringent, there is little incentive for loggers to purchase a tracked processor if their only motivation is to increase merchantability values.

42 ENGINEERING↗

Corn Stover Fractions from Different Harvest Conditions

There is a lot of variability in biomass. This variability can make it difficult to process the biomass into a consistent format for handling and conversion. As a result, bioenergy feedstocks are often under- or over-converted. Corn stover in particular can be harvested in different ways, baled in different ways, and has significant intrinsic variability due to its very different anatomies. These factors could cause variability in the fractions of corn stover. The fractions of corn stover are leaf, husk, cob, and stalk.

09 BIOMASS FUELS↗

A VOI Web Application for Distinct Geothermal Domains: Statistical Evaluation of Different Data Types within the Great Basin

The Great Basin region contains different domains that have different structural and hydrothermal flow patterns. Depending on the characteristics of these patterns, certain data types may be more successful at detecting hidden geothermal resources. In this paper, we quantitatively evaluate if certain data types are more successful in certain domains. Given different aquifer, strain and structural conditions, we explore which data types statistically reveal positively labeled geothermal sites. We utilize value of information (VOI) metrics to help quantify the reliability of data types to discriminate against "positive" and "negative" labeled geothermal sites. We also evaluate how kernel density estimation can help generalize the statistics that inform VOI, which is necessary given the limited data in geothermal exploration. Except for the Carbonate Aquifer, the highest ranking of the Vimperfect is the Local Structural Setting. Next, the slip and dilation tendency is first for Carbonate Aquifer and second for Central Nevada Seismic Belt and Western Great Basin. For the Carbonate Aquifer, heat flow is has the lowest Vimperfect value compared to the other three domains, which is consistent with the understanding of how heat flow measurements are masked by regional groundwater flow.

Bayesian analysis↗

Investigation of reactivity differences in cylinder arrays using various fill geometries with constant mass

The factors affecting criticality safety are well understood by the nuclear engineering industry. Array configurations present multiple challenges to the industry due to the competing effects that are present in array systems - most notably interaction/spacing, moderation, and reflection. However, even the fissile mass geometry has been shown to complicate array systems. This attribute is also seen in filled UF{sub 6} cylinders, thus making it important to understand the reactivity in cylinder arrays. The process of filling UF{sub 6} cylinders results in non-uniform cylinder fill geometries. Due to the non-uniform fill, it becomes necessary to model a specific UF{sub 6} mass, in cylinder arrays, in different ways to ensure understanding of the reactivity of the system. Some of the ways to model the UF{sub 6} include: spreading the UF{sub 6} mass across the cylinder, all UF{sub 6} on the bottom of the cylinder, UF{sub 6} consolidated in the middle of the cylinder, and UF{sub 6} consolidated on the outside of the cylinder. Spreading the UF{sub 6} mass across the cylinder is accomplished by adjusting the UF{sub 6} density to achieve the given UF{sub 6} mass, whereas all the other scenarios use a fixed UF{sub 6} density with varying thicknesses to achieve the given UF{sub 6} mass. A different modeling approach, which helps to capture mixture effects, is to model the UF{sub 6} mass using the nominal UF{sub 6} density along with the void space for a given mass and distribute the mixture throughout the entire cylinder. This paper compares the reactivity of a cylinder array at a constant mass value using three different modeling techniques - completely filling the cylinder using a reduced UF{sub 6} density, filling the cylinder with nominal UF{sub 6} density and void space throughout the cylinder (same amount of void space as in the last technique), and all UF{sub 6} in the bottom of the cylinder (all void space on top of UF{sub 6}). The results demonstrate that completely filling the cylinder produces the most reactive UF{sub 6} cylinder array system. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Minimum critical values for various fissile media with very low content of plutonium mixed in different kinds of matrix - 14340

For materials slightly contaminated by fissile nuclides (such as radioactive sludge), it could be useful to take into account the low fissile density in order to define the nuclear criticality safety limits (mass, volume,...) when this density is lower than the one of the optimally moderated fissile-water mixture (e.g. 30 g/dm{sup 3} for {sup 239}Pu). In such a case, if the material is modelled by the usual fissile-water mixture only, the fissile medium still contains a void fraction when the optimal moderation ratio is reached. Then, the question is to know whether modeling the other elements of the material can impact the nuclear criticality safety limits, in particular when they are good scattering elements. This paper aims at studying the impact of replacing the void fraction in plutonium fissile media, with various apparent densities, by different kinds of matrix containing scattering elements. Minimum critical values (mass, volume, diameter and thickness) have been determined for plutonium media, composed of 100 % {sup 239}Pu, with densities of 2, 5.8 and 7.3 g/dm{sup 3} in different kinds of matrix containing scattering elements (graphite, carbon, alumina, silica, magnesia, fluorite and calcium oxide). Different contents of the aforementioned scattering elements in the fissile media were studied and additional moderation was ensured by water. The results highlight that minimum critical values are lower when considering a fissile medium containing graphite, carbon, silica, alumina and magnesia with additional water moderation, compared to plutonium-water mixture only with the same low fissile apparent density. However, there is still a benefit of crediting density (critical values for a low fissile density are still higher than critical values without a density control). (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

(Doublon) Benchmarking of Different Inverse Point Kinetics Implementations for an Autocorrected Reactimeter Algorithm

In November 2017, the Transient Reactor Test Facility returned to operation. Since that time, many transient test series have been completed, such as the Transient Heatsink Overpower Response capsule (THOR), the Transient Water Irradiation System for TREAT (TWIST), and Sirius. Each has provided valuable data for materials performance and reactor safety that can be applied in future designs. During each experimental series, detector count rates provided important information on the core behavior during transients. However, a limitation of these data is that variations in the neutron distribution during experiments can cause errors when attempting to infer reactivity evolution from detector signals. Neutron physics codes can be used to compute the flux shape variations. However, this is a poor solution when the experimental data is used for code verification, validation and uncertainty quantification. Indeed, if the output of the code is used both as a reference and to correct what the reference is compared to, the circular dependency limits the quality of the verification, validation and uncertainty quantification approach. To overcome this problem, the autocorrected reactimeter algorithm (ACRA) has been developed. This approach infers a time-dependent reactivity evolution by testing different spatial corrections and selecting the one that minimizes reactivity variations when the core is in a frozen configuration (i.e., when there is no variation in parameters affecting reactivity). However, the scope of this method was limited to transients where there were negligible thermal feedback. Indeed, the core is never in a frozen configuration when the fuel temperature varies during the whole transient. This is our motivation for developing an improved version of the ACRA that does not require frozen configurations. To develop this new algorithm, we need a precise and unbiased implementation of the inverse point kinetic equations (IPKEs) as any error in the reactivity evaluation will be propagated into the choice of the optimal spatial correction. Indeed, the previous reactimeter algorithm would use approximations, such as a negligible flux amplitude derivative, to focus on rapidity. For the numerical validation of ACRA, we aim at absolute error under for reactivity derived from signals similar to the one of this study. In this summary, we test eight different IPKE implementations. Each will process a mockup signal built for this study, similar to those that the future ACRA will process. Each reactivity output will be compared to the reference reactivity that has been used to generate the mockup signal. The implementation minimizing the difference with the reference reactivity will be used in the development of a new ACRA formulation.

73 - NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Generalized Reference Fields and Source Interpolation for the Difference Formulation of Radiation Transport

In the difference formulation for the transport of thermally emitted photons, the photon intensity is defined relative to a reference field, the black body at the local material temperature. This choice of reference field combines the separate emission and absorption terms that nearly cancel, removing the dominant cause of noise in the Monte Carlo solution of thick systems, but introduces time and space derivative source terms that can not be determined until the end of the time step. The space derivative source term can also lead to noise induced crashes under certain conditions where the real physical photon intensity differs strongly from a black body at the local material temperature. In this paper, we consider a difference formulation relative to the material temperature at the beginning of the time step, or in cases where an alternative temperature better describes the radiation field, that temperature. The result is a method where iterative solution of the material energy equation is efficient and noise induced crashes are avoided. We couple our generalized reference field scheme with an ad hoc interpolation of the space derivative source, resulting in an algorithm that produces the correct flux between zones as the physical system approaches the thick limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tribological studies of a Zr-based bulk metallic glass with different states

The tribological characteristics of a bulk-metallic glass (BMG) Zr52.5Cu17.9Ni14.6Al10.0Ti5.0 (Vit 105) with different states have been studied. Friction and wear tests were conducted using a ball-on-flat reciprocating sliding apparatus against AISI E52100 bearing steel under dry condition. The observed wear resistance in an ascending order is deformed, crept, relaxed, and as-cast. Results suggested that the wear process of BMG alloys involved abrasion, adhesion, and oxidation. The differences in hardness, free volume, and embrittlement at different states significantly affected the friction and wear behaviors of the BMG alloys.

36 MATERIALS SCIENCE↗

A new high-order spectral difference method for simulating viscous flows on unstructured grids with mixed-element meshes

In the present study, a spectral difference (SD) method is developed for viscous flows on meshes with a mixture of triangular and quadrilateral elements. The standard SD method for triangular elements, which employs Lagrangian interpolating functions for fluxes, is not stable when the designed accuracy of spatial discretization is third order or higher. Unlike the standard SD method, the method examined here uses vector interpolating functions in the Raviart-Thomas (RT) spaces to construct continuous flux functions on reference elements. The spectral-difference Raviart-Thomas (SDRT) method was originally proposed by Balan et al. and implemented on triangular-element meshes for invisid flow only. Our present results demonstrated that the SDRT method is stable and high-order accurate in two dimensions (2D) for a number of test problems by using triangular-, quadrilateral-, and mixed-element meshes for both inviscid and viscous flows. A stability analysis is also performed for mixed elements. Furthermore, we found our current SDRT scheme is stable for fourth-order accurate spatial discretizations. However, a stable fifth-order SDRT scheme remains to be identified.

97 MATHEMATICS AND COMPUTING↗

Directional finite difference method for directly solving 3D gyrokinetic field equations with enhanced accuracy

The gyrokinetic (GK) field equation is a three-dimensional (3D) elliptic equation, but it is often simplified to a set of two-dimensional (2D) equations by assuming that the field does not vary along a specific direction. However, this simplification can introduce inevitable 0th-order numerical errors, as nonlinear mode coupling in toroidal geometry can produce undesirable harmonic modes that violate the assumption. In this work, we propose a novel directional finite difference method (FDM) with a local coordinate transformation to better resolve the target field of interest. The directional FDM can accurately solve 3D GK field equations without simplifications, which can overcome the limitations of conventional methods. The accuracy and efficiency of different FDMs are analyzed in great detail for a variety of geometries, from simple 2D Cartesian coordinates to realistic 3D curvilinear coordinates. The 0th-order numerical errors of simplified 2D GK equations were found to be more problematic for low-harmonic modes and low aspect ratio geometries such as spherical tokamaks. On the other hand, the directional 3D FDM can accurately resolve a much wider range of harmonic modes aligned to the direction of interest, including the low-harmonic modes. In conclusion, we demonstrate that the directional 3D FDM is a highly effective algorithm for solving the 3D GK field equations, achieving accuracy improvements of 10 to 100 times or more, particularly for low-harmonic modes in spherical tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A moving mesh finite difference method for equilibrium radiation diffusion equations

An efficient moving mesh finite difference method is developed for the numerical solution of equilibrium radiation diffusion equations in two dimensions. The method is based on the moving mesh partial differential equation approach and moves the mesh continuously in time using a system of meshing partial differential equations. The mesh adaptation is controlled through a Hessian-based monitor function and the so-called equidistribution and alignment principles. Several challenging issues in the numerical solution are addressed. Particularly, the radiation diffusion coefficient depends on the energy density highly nonlinearly. This nonlinearity is treated using a predictor–corrector and lagged diffusion strategy. Moreover, the nonnegativity of the energy density is maintained using a cutoff method which has been known in literature to retain the accuracy and convergence order of finite difference approximation for parabolic equations. Numerical examples with multi-material, multiple spot concentration situations are presented. Numerical results show that the method works well for radiation diffusion equations and can produce numerical solutions of good accuracy. It is also shown that a two-level mesh movement strategy can significantly improve the efficiency of the computation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗