Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “correspondence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Inversion technique for IR heterodyne sounding of stratospheric constituents from space platforms

The techniques which have been employed for inversion of IR heterodyne measurements for remote sounding of stratospheric trace constituents usually rely on either geometric effects based on limb-scan observations (i.e., onion peel techniques) or spectral effects by using weighting functions corresponding to different frequencies of an IR spectral line. An experimental approach and inversion technique are discussed which optimize the retrieval of concentration profiles by combining the geometric and the spectral effects in an IR heterodyne receiver. The results of inversions of some synthetic CIO spectral lines corresponding to solar occultation limb scans of the stratosphere are presented, indicating considerable improvement in the accuracy of the retrieved profiles. The effects of noise on the accuracy of retrievals are discussed for realistic situations.

Abbas, M. M.↗

The solar modulation of galactic cosmic rays in the outer heliosphere

The intensity changes of galactic cosmic rays associated with the enhanced solar activity during the onset of cycle 21 were observed by Pioneer 10 and Helios 1 and 2, over an extended range of energy and heliocentric distance that provides new insight into the relative importance of the various processes involved in the long-term modulation. A close correspondence is found between changes at 1 AU and those at 23 AU, for hydrogen and helium in the range of 100-200 MeV per nucleon. The time delay observed corresponds to an outward propagation velocity of some 550 km/sec, suggesting that the recently discovered, moderately long-lived, radially propagating shock waves in the outer heliosphere may play a key role in the long-term modulation.

Mcdonald, F. B.↗

K/Ar dating of lunar soils. IV - Orange glass from 74220 and agglutinates from 14259 and 14163

Total fusion Ar-40 - A-39 analyses of orange glass from lunar soil 74220 combined with the sums of earlier stepwise heating data by other workers have yielded a precise K/Ar isochron with a slope corresponding to an age of 3.66 + or - 0.03 G.y. for the orange glass. The result is in marginal agreement with Huneke's (1978) age of 3.60 + or - 0.04 G.y. for 74220 glass. The Ar systematics in the agglutinates from 14259 and 14163 are dominated by volume correlated argon. Step-wise heating analyses yield data which define experimentally reproducible linear arrays in Ar-40/Ar-36 vs. K-40/Ar-36 diagrams. The slopes of these arrays correspond formally to very old ages, but it is not clear, however, that such ages have any physical significance.

Alexander, E. C., Jr.↗

Time variability and structure of quiet sun sources at 6 cm wavelength

Results are presented of a detailed study of quiet sun emitting regions at 6 cm and their correspondence with regions observed at optical wavelengths. The Westerbork Synthesis Radio Telescope was used to obtain a 12-hr synthesis map of a quiet sun region with a resolution of 6 arcsec. Comparison of this map with a Ca(+) K filtergram indicates the features on the 6-cm map to correspond to Ca(+) K chromospheric networks and cells. In addition, about 72% of the magnetic field enhancements observed on photospheric magnetograms coincides with 6-cm emissive regions. Intercomparison of the 12-hr synthesis map, a 4-hr synthesis map and 6-cm fan beam scans along with the Ca(+) K and magnetogram results reveals all of the time-varying 6-cm elements to be located on Ca(+) K networks, and about 40% of them to be coincident with magnetogram enhancements. Lifetimes of the time-varying sources vary from a few minutes to several tens of minutes, and intensity varies by factors of 2 to 7.

Erskine, F. T.↗

Plasma wave levels and IMF orientations preceding observations of interplanetary shocks by ISEE-3

Some interplanetary shocks detected by ISEE-3 are preceded by many hours of strongly enhanced plasma wave noise at a few kHz, while others have essentially no wave precursors above background. It has been shown that these extremes correspond to quasi-parallel and quasi-perpendicular shocks, respectively, based on the instantaneous orientation angle of the interplanetary magnetic field (IMF) to the shock normal at the time the shocks cross the spacecraft. It is shown that precursor wave noise level is correlated with field orientation and an extrapolated instantaneous orientation angle throughout the preshock observation interval for two contrasting active and quiet cases, and that intermediate, variable noise levels correspond to intermediate, variable IMF orientations. It is inferred that foreshocks are an intrinsic part of the structure of quasiparallel interplanetary shocks.

Greenstadt, E. W.↗

The C/H ratio in Jupiter from the Voyager infrared investigation

From a selection Voyager IRIS spectra corresponding to cloud-free areas of Jupiter, the CH4/H2 volume ratio in the atmosphere of this planet has been determined to be equal to 0.00195 + or - 0.00022, which corresponds to 2.07 + or - 0.24 times the solar value of Lambert (C/H = 0.00047). The estimate of errors includes both instrument noise and systematic uncertainties. Implications of this result for the formation and evolution of Jupiter are discussed.

Gautier, D.↗

Effects of heating rate on density, microstructure, and strength of Si3N4-6 wt.% Y2O3 and a beta-prime sialon

The effects of the heating rate during sintering/firing on the final density, microstructure, and strength of Si3N4-6 wt% Y2O3 and beta-prime sialon, sintered for four hours at 1750 C, are examined. In Si3N4-6 wt% Y2O3 increasing the heating rate from 7 C/min to 25 C/min to 90 C/min results in a corresponding decrease in the final density from 3.01 g/cu cm to 2.92 g/cu cm to 2.76 g/cu cm. In the beta-prime sialon composition all three heating rates produce an equivalent final density of 3.13 g/cu cm. All heating rates in both compositions produce nonhomogeneous microstructures. The room-temperature strength of Si3N4-6 wt% Y2O3 increases from 372 to 510 MPa with increased density, while the corresponding strengths for the betaprime sialon at equivalent densities are 345 to 445 MPa.

Campbell, S. S.↗

Measurements of outflow from the base of solar coronal holes

New evidence is presented that EUV emission lines formed at the levels of the base of the corona and the transition region are systematically shifted to shorter wavelengths within coronal holes relative to the rest of the solar disk, and that moreover this shift increases with height in the atmosphere. Measurements were made with a rocket-borne EUV spectrometer having high spectroscopic resolution and stability flown on July 15, 1980. Repeated measurements were made along a chord of the solar disk that crossed a compact coronal hole near sun center identified on gamma 10830 He I spectroheliograms. The maximum measured shift corresponded to a velocity of 12 km/sec in gamma 625 Mg X and 7 km/sec in gamma 629 O V. If these velocities correspond to a true mass flux, they provide important data on the acceleration of coronal plasma in open magnetic field regions. These observed Doppler displacements are a strong and significant signature of coronal holes, now measured on three rocket flights.

Rottman, G. J.↗

Dynamics Explorer observations of equatorial spread F - Evidence for drift waves

Recent DE-2 data from the Langmuir probe, vector electric field, and ion drift meter instruments are employed to study equatorial spread F in the frequency regime of the low frequency drift and the lower hybrid drift instabilities. Strong electron density gradients topside equatorial F region correspond to regions of high electric field waves and large ion drift velocities. The electric field waves are seen in two distinct wavelength ranges which correspond to the parameter regimes of the low frequency drift and the lower hybrid drift instabilities. In the smaller of the two wavelength ranges the lower hybrid drift instability is found to be unstable, based on the ion drift velocity and the other plasma parameters measured on DE-2, and using published theory. Thus there is experimental evidence that the lower hybrid drift instability may produce the observed short wavelength waves without invoking a cascading mechanism.

Hoegy, W. R.↗

A method for estimation of atmospheric water vapor profiles by microwave radiometry

Simultaneous measurements of microwave emission from the earth, in the oxygen band near 60 GHz, and the water vapor line near 183 GHz are conducted to determine the atmospheric temperature as a function of the pressure and the water vapor burden, and a combination of these two profiles yields a profile of water vapor burden versus pressure. Numerical simulations are developed by using temperature and water vapor profiles from subtropical and midlatitude radiosonde stations, and by assuming surface reflectivities typical of either land or ocean. Over a land surface, the residual rms errors in the estimated water vapor burden profile between 300 and 1000 mb are determined to range from 23 to 43% of the a priori standard deviation of water vapor burden for the corresponding climate. The relative humidity profile is also estimated and found to contain rms errors ranging from 4 to 17% of saturation. Over a seawater surface, using three additional channels of 18.5, 22.2, and 31.7 GHz, the corresponding results are found to be 3-46% of the a priori standard deviation for water vapor burden and 4-15% rms error for relative humidity.

Rosenkranz, P. W.↗

Hot mantles, moderate photospheres for Wolf-Rayet stars

The amount of continuous energy from Wolf-Rayet stars and the shape of the continuous spectrum from the ultraviolet to the near infrared correspond to effective temperatures in the range 25,000 to 30,000 K. The value of log g is of the order of 4.0 + or - 0.5. Thus the photospheres of Wolf-Rayet stars correspond to those of moderately hot stars. The line spectra of Wolf-Rayet stars, however, indicate that electron temperatures greater than 30,000 K occur in the outer atmospheres or mantles of these stars. Here outflow is important.

Underhill, A. B.↗

SAGE measurements of Mount St. Helens volcanic aerosols

The SAGE satellite system was used to make measurements on the optical extinction produced by stratospheric aerosols from the Mount St. Helens eruption. Two periods of observation were analyzed. In the first period (May 21 to 31, 1980), SAGE moved southward from latitude 60 N, and crossed the United States approximately one week after the May 18th eruption. Enhancements in stratospheric extinction were confined to latitudes between about 55 N and 25 N and longitudes between 10 W and 140 W. Individual layers were observed up to altitudes of 23 km. The geographical location of these layers corresponded closely to that expected on the basis of high-altitude meteorological data. During June and much of July, SAGE was, by reason of its geographical position and other orbital characteristics, unable to make further measurements on the northern hemisphere. Between July 19th and August 12th a second southward pass over the northern hemisphere occurred and further observations were made. The volcanic aerosol in the stratosphere was now found to be widely distributed over the hemisphere, the maximum concentrations being north of 50 N. The aerosol showed considerable inhomogeneity and had reached as far south as 15 N but little, if any, had crossed the equator into the southern hemisphere. Individual layers at different heights were still distinguishable. The total stratospheric aerosol loading on this occasion appeared to be greater than in May and corresponded to an increase in global stratospheric mass of between 50 and 100 percent.

Kent, G. S.↗

On the structure of an underexpanded rectangular jet

An underexpanded jet of air issuing from a converging rectangular nozzle of moderate aspect ratio was investigated. Schileren pictures of the flow field along with hot-wire measurements in the jet were obtained at different pressure ratios. At the pressure ratio corresponding to the maximum screeching sound, Schlieren photographs show a very strong organized cylindrical wave pattern on either side of the jet, with their respective sources being located at the end of the third shock cell. Associated with this wave pattern is a large increase in the angle of spread of the jet. It is shown that the self excitation helps to induce large-scale vortical motions in the jet both in the plane containing the small dimension of the nozzle and in the plane containing the long dimension of the nozzle. However, the locations of these structures are different in the two planes. Nevertheless, the characteristic Strouhal number corresponding to these large-scale structures in both planes is the same and equal to 0.12. The influence of the self excitation on the mean velocities and rms intensities was also investigated. For the full range of pressure ratios studied, similarity was found in the mean velocity and rms intensity profiles in the two central planes beyond 80 widths downstream of the nozzle exit. However, the shapes of the similarity profiles are different in the two planes.

Krothapalli, A.↗

Development of a multiple-parameter nonlinear perturbation procedure for transonic turbomachinery flows: Preliminary application to design/optimization problems

An investigation was conducted to continue the development of perturbation procedures and associated computational codes for rapidly determining approximations to nonlinear flow solutions, with the purpose of establishing a method for minimizing computational requirements associated with parametric design studies of transonic flows in turbomachines. The results reported here concern the extension of the previously developed successful method for single parameter perturbations to simultaneous multiple-parameter perturbations, and the preliminary application of the multiple-parameter procedure in combination with an optimization method to blade design/optimization problem. In order to provide as severe a test as possible of the method, attention is focused in particular on transonic flows which are highly supercritical. Flows past both isolated blades and compressor cascades, involving simultaneous changes in both flow and geometric parameters, are considered. Comparisons with the corresponding exact nonlinear solutions display remarkable accuracy and range of validity, in direct correspondence with previous results for single-parameter perturbations.

Stahara, S. S.↗

LANDSAT image differencing as an automated land cover change detection technique

Image differencing was investigated as a technique for use with LANDSAT digital data to delineate areas of land cover change in an urban environment. LANDSAT data collected in April 1973 and April 1975 for Austin, Texas, were geometrically corrected and precisely registered to United States Geological Survey 7.5-minute quadrangle maps. At each pixel location reflectance values for the corresponding bands were subtracted to produce four difference images. Areas of major reflectance differences are isolated by thresholding each of the difference images. The resulting images are combined to obtain an image data set to total change. These areas of reflectance differences were found, in general, to correspond to areas of land cover change. Information on areas of land cover change was incorporated into a procedure to mask out all nonchange areas and perform an unsupervised classification only for data in the change areas. This procedure identified three broad categories: (1) areas of high reflectance (construction or extractive), (2) changes in agricultural areas, and (3) areas of confusion between agricultural and other areas.

Stauffer, M. L.↗

Development of tough, strong, iron-base alloy for cryogenic applications

The development of an iron-base alloy that combines the normally divergent properties of high toughness and high strength at cryogenic temperatures is discussed. Specifically, alloy properties were sought which at -196 C would exhibit a fracture toughness of 220 MPa-m(1/2) with a corresponding yield strength of 1.4 GPa (200 ksi). Early work showed that high toughness could be achieved in Fe-12Ni alloys containing reactive metal additions such as Al, Nb, Ti, and V. Further research emphasized strengthening of these tough alloys by thermomechanical processing and the addition of Cu. Results showed that high strength and high toughness could be achieved in a single alloy at temperatures as low as -196 C. An alloy with composition Fe-12Ni-9.5Al-2Cu exhibited a yield strength of 1.65 GPa with a corresponding fracture toughness of 220 MPa-m(1/2) at -196 C. Strengthening due to Cu additions to the Fe-12Ni base alloys results primarily from precipitation of Cu-rich epsilon particles approximately 20 nm in diameter. Strengthening mechanisms are discussed in terms of an elastic modulus hardening model and are supported by transimission electron microscopy examinations of selected test specimens.

Stephens, J. R.↗

Synchronized voltage contrast display analysis system

An apparatus and method for comparing internal voltage potentials of first and second operating electronic components such as large scale integrated circuits (LSI's) in which voltage differentials are visually identified via an appropriate display means are described. More particularly, in a first embodiment of the invention a first and second scanning electron microscope (SEM) are configured to scan a first and second operating electronic component respectively. The scan pattern of the second SEM is synchronized to that of the first SEM so that both simultaneously scan corresponding portions of the two operating electronic components. Video signals from each SEM corresponding to secondary electron signals generated as a result of a primary electron beam intersecting each operating electronic component in accordance with a predetermined scan pattern are provided to a video mixer and color encoder.

Johnston, M. F.↗

An experimental study of adsorption interference in binary mixtures flowing through activated carbon

The isothermal transmission through activated carbon adsorber beds at 25 C of acetaldehyde-propane and acetylene-ethane mixtures in a helium carrier gas was measured. The inlet concentration of each component was in the range between 10 ppm and 500 ppm. The constant inlet volumetric flow rate was controlled at 200 cc (STP)/min in the acetaldehyde-propane experiments and at 50 cc (STP)/min in the acetaldehyde-ethane experiments. Comparison of experimental results with the corresponding single-component experiments under similar conditions reveals interference phenomena between the components of the mixtures as evidenced by changes in both the adsorption capacity and the dispersion number. Propane was found to displace acetaldehyde from the adsorbed state. The outlet concentration profiles of propane in the binary mixtures tend to become more diffuse than the corresponding concentration profiles of the one-component experiments. Similar features were observed with mixtures of acetylene and ethane; however, the displacement of acetylene by ethane is less pronounced.

Madey, R.↗