Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “complex system theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

A suboptimal stochastic controller for an N-body spacecraft

Considerable attention, in the open literature, is being focused on the problem of developing a suitable set of deterministic dynamical equations for a complex spacecraft. This paper considers the problem of determining a stochastic optimal controller for an n-body spacecraft. The approach used in obtaining the stochastic controller involves the application, interpretation, and combination of advanced dynamical principles and the theoretical aspects of modern control theory. The stochastic controller obtained herein for a complicated model of a spacecraft uses sensor angular measurements associated with the base body to obtain smoothed estimates of the entire state vector. It can be easily implemented, and it enables system performance to be significantly improved.

Larson, V.↗

Antennas

Reception of the exceedingly small signals from spacecraft typical of deep space communication requires antennas of enormous size, complexity, and precision. The two Voyager spacecraft each have 20-watt X-band transmitters; and at their Saturn encounter distances from Earth of approximately 1.5 billion kilometers, the power density received on the Earth was less than 10 to the minus 19th power watts per square meters. The thrust in deep-space communications improvement was in the areas of ground and spacecraft antenna size and performance increases, spacecraft transmitter power increase, ground receiving system design, and telemetry information coding. Ground antenna theory, design, and performance as related to the particular problem of receiving spacecraft signals using the Deep Space Network (DSN) is described.

Slobin, S. D.↗

Some partial-unit-memory convolutional codes

The results of a study on a class of error correcting codes called partial unit memory (PUM) codes are presented. This class of codes, though not entirely new, has until now remained relatively unexplored. The possibility of using the well developed theory of block codes to construct a large family of promising PUM codes is shown. The performance of several specific PUM codes are compared with that of the Voyager standard (2, 1, 6) convolutional code. It was found that these codes can outperform the Voyager code with little or no increase in decoder complexity. This suggests that there may very well be PUM codes that can be used for deep space telemetry that offer both increased performance and decreased implementational complexity over current coding systems.

Abdel-Ghaffar, K.↗

{ital N}* Structure and Strong QCD

In attempting to match QCD with Nature, it is necessary to confront the many complexities of strong, nonlinear dynamics in relativistic quantum field theory, e.g. the loss of particle number conservation, the frame and scale dependence of the explanations and interpretations of observable processes, and the evolving character of the relevant degrees-of-freedom. The peculiarities of QCD ensure that it is also the only known fundamental theory with the capacity to sustain massless elementary degrees-of-freedom, gluons and quarks; and yet gluons and quarks are predicted to acquire mass dynamically so that the only massless systems in QCD are its composite Nambu-Goldstone bosons. All other everyday bound states possess nuclear-size masses, far in excess of anything that can directly be tied to the Higgs boson. These observations highlight fundamental questions within the Standard Model: what is the source of the mass for the vast bulk of visible matter in the Universe, how is its appearance connected with confinement; how is this mass distributed within hadrons and does the distribution differ from one hadron to another? This contribution sketches insights drawn using modern methods for the continuum bound-state problem in QCD, and how they have been informed by empirical information on the hadron spectrum and nucleon-to-resonance transition form factors.

Roberts, Craig D.↗

Role of Electron Correlation beyond the Active Space in Achieving Quantitative Predictions of Spin-Phonon Relaxation

Single-molecule magnets (SMMs) are promising candidates for molecular-scale data storage and processing due to their strong magnetic anisotropy and long spin relaxation times. However, as temperature rises, interactions between electronic states and lattice vibrations accelerate spin relaxation, significantly limiting their practical applications. Recently, ab initio simulations have made it possible to advance our understanding of phonon-induced magnetic relaxation, but significant deviations from experiments have often been observed. The description of molecules’ electronic structure has been mostly based on complete active space self-consistent field (CASSCF) calculations, and the impact of electron correlation beyond the active space remains largely unexplored. In this study, we provide the first systematic investigation of spin-phonon relaxation in SMMs with post-CASSCF multiconfigurational methods, specifically CAS followed by second-order perturbation theory and multiconfiguration pair-density functional theory. Taking Co(II)- and Dy(III)-based SMMs as case studies, we analyze how electron correlation influences spin-phonon relaxation rates across a range of temperatures, comparing theoretical predictions with experimental observations. Our findings demonstrate that post-CASSCF treatments make it possible to achieve quantitative predictions for Co(II)-based SMMs. For Dy(III)-based systems, however, accurate predictions require consideration of additional effects, underscoring the urgent necessity of further advancing the study of the effects of electronic correlation in these complex systems.

Energy↗

Nonlinear Topological Photonics: Capturing Nonlinear Dynamics and Optical Thermodynamics

Combining multiple optical resonators or engineering dispersion of complex media has provided an effective method for demonstrating topological physics controlling photons in unprecedented ways such as unidirectional light propagation and spatially localized modes between an interface or on a corner. Further, adding nonlinear responses to those topological photonic systems has enabled achieving diverse phases of photons in both space and time, allowing for more functionalities in photonic devices that provide a new playground for studying dynamic features of nonlinear topological systems. However, most methods for describing nonlinear topological photonic systems rely on linear topological theories, making it challenging to accurately characterize the topology of nonlinear systems. Thus, substantial efforts have focused on rigorously describing nonlinear topological phases and developing effective tools to analyze nonlinear topological effects. Meanwhile, coupled multimode optical waveguides with nonlinear dynamic responses provide an excellent platform for the statistical description of photons, opening a new paradigm called “optical thermodynamics”. This review will introduce the basic concepts of nonlinear topological photonics and the recent development of theoretical approaches focusing on data-driven approaches for creating phase diagrams as well as the spectral localizer framework and the pseudospectrum method for understanding optical nonlinearities in topological systems. In addition, the new concept of optical thermodynamics will be introduced with some recent theoretical works.

Topological photonics↗

Photoelectron and computational studies of the copper-nucleoside anionic complexes, Cu{sup -}(cytidine) and Cu{sup -}(uridine)

The copper-nucleoside anions, Cu{sup -}(cytidine) and Cu{sup -}(uridine), have been generated in the gas phase and studied by both experimental (anion photoelectron spectroscopy) and theoretical (density functional calculations) methods. The photoelectron spectra of both systems are dominated by single, intense, and relatively narrow peaks. These peaks are centered at 2.63 and 2.71 eV for Cu{sup -}(cytidine) and Cu{sup -}(uridine), respectively. According to our calculations, Cu{sup -}(cytidine) and Cu{sup -}(uridine) species with these peak center [vertical detachment energy (VDE)] values correspond to structures in which copper atomic anions are bound to the sugar portions of their corresponding nucleosides largely through electrostatic interactions; the observed species are anion-molecule complexes. The combination of experiment and theory also reveal the presence of a slightly higher energy, anion-molecule complex isomer in the case of the Cu{sup -}(cytidine). Furthermore, our calculations found that chemically bond isomers of these species are much more stable than their anion-molecule complex counterparts, but since their calculated VDE values are larger than the photon energy used in these experiments, they were not observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-level coupled cluster theory

We present a general formalism where different levels of coupled cluster theory can be applied to different parts of the molecular system. The system is partitioned into subsystems by Cholesky decomposition of the one-electron Hartree-Fock density matrix. In this way the system can be divided across chemical bonds without discontinuities arising. The coupled cluster wave function is defined in terms of cluster operators for each part and these are determined from a set of coupled equations. The total wave function fulfills the Pauli-principle across all borders and levels of electron correlation. We develop the associated response theory for this multi-level coupled cluster theory and present proof of principle applications. The formalism is an essential tool in order to obtain size-intensive complexity in the calculation of local molecular properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal behavior in Se-Te chalcogenide system: Interplay of thermodynamics and kinetics

Heat capacity measurements were performed for Se, Se{sub 90}Te{sub 10}, Se{sub 80}Te{sub 20}, and Se{sub 70}Te{sub 30} materials in the 230–630 K temperature range. Both glassy and crystalline C{sub p} dependences were found to be identical within the experimental error. The compositional dependence of the N-type undercooled liquid C{sub p} evolution was explained on the basis of free-volume theory; vibrational and chemical contributions to heat capacity were found to be roughly similar for all Se-Te compositions. The thermal behavior in the Se-Te chalcogenide system was thoroughly studied: glass transition, cold crystallization, and melting were investigated in dependence on composition and various experimental conditions (heating rate, particle size, and pre-nucleation period). The kinetics of the structural relaxation and crystallization processes are described in terms of the Tool-Narayanaswamy-Moynihan and Johnson-Mehl-Avrami models. The complexity of these processes is thoroughly discussed with regard to the compositionally determined changes of molecular structures. The discussion is conducted in terms of the mutual interplay between the thermodynamics and kinetics in this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure complexity and extremely large magnetoresistance in antiferromagnetic semimetal SmAgSb 2

SmAgSb 2 , a layered magnetic semimetal in the tetragonal 𝑅⁢𝑇⁢ Sb 2 family (𝑅 = Y, Sc, rare earth; 𝑇 = transition metal), is known to exhibit extremely large magnetoresistance (XMR) below its antiferromagnetic (AFM) transition temperature. Here, in this work, we present a comprehensive investigation combining magnetotransport measurements, density functional theory calculations accounting for electron correlation, and angle-resolved photoemission spectroscopy. Our results reveal a complex electronic structure characterized by a multiband Fermi surface and intricate magnetic ground states. We demonstrate that simple two-band models, previously employed in the literature, fail to consistently describe the observed transport phenomena. Notably, we report an XMR of approximately 25200% at 2 K under a 14 T magnetic field, significantly exceeding earlier reports for this material family and rivaling the performance of prominent nonmagnetic XMR systems. This pronounced enhancement below 𝑇 𝑁 suggests that the XMR originates from a combination of multiband electron-hole compensation and enhanced magnetic scattering in this correlated AFM semimetal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A high speed sequential decoder

The performance and theory of operation for the High Speed Hard Decision Sequential Decoder are delineated. The decoder is a forward error correction system which is capable of accepting data from binary-phase-shift-keyed and quadriphase-shift-keyed modems at input data rates up to 30 megabits per second. Test results show that the decoder is capable of maintaining a composite error rate of 0.00001 at an input E sub b/N sub o of 5.6 db. This performance has been obtained with minimum circuit complexity.

Lum, H., Jr.↗

A first-order time-domain Green's function approach to supersonic unsteady flow

A time-domain Green's Function Method for unsteady supersonic potential flow around complex aircraft configurations is presented. The focus is on the supersonic range wherein the linear potential flow assumption is valid. The Green's function method is employed in order to convert the potential-flow differential equation into an integral one. This integral equation is then discretized, in space through standard finite-element technique, and in time through finite-difference, to yield a linear algebraic system of equations relating the unknown potential to its prescribed co-normalwash (boundary condition) on the surface of the aircraft. The arbitrary complex aircraft configuration is discretized into hyperboloidal (twisted quadrilateral) panels. The potential and co-normalwash are assumed to vary linearly within each panel. Consistent with the spatial linear (first-order) finite-element approximations, the potential and co-normalwash are assumed to vary linearly in time. The long range goal of our research is to develop a comprehensive theory for unsteady supersonic potential aerodynamics which is capable of yielding accurate results even in the low supersonic (i.e., high transonic) range.

Freedman, M. I.↗

Dynamical Approach Study of Spurious Numerics in Nonlinear Computations

The last two decades have been an era when computation is ahead of analysis and when very large scale practical computations are increasingly used in poorly understood multiscale complex nonlinear physical problems and non-traditional fields. Ensuring a higher level of confidence in the predictability and reliability (PAR) of these numerical simulations could play a major role in furthering the design, understanding, affordability and safety of our next generation air and space transportation systems, and systems for planetary and atmospheric sciences, and in understanding the evolution and origin of life. The need to guarantee PAR becomes acute when computations offer the ONLY way of solving these types of data limited problems. Employing theory from nonlinear dynamical systems, some building blocks to ensure a higher level of confidence in PAR of numerical simulations have been revealed by the author and world expert collaborators in relevant fields. Five building blocks with supporting numerical examples were discussed. The next step is to utilize knowledge gained by including nonlinear dynamics, bifurcation and chaos theories as an integral part of the numerical process. The third step is to design integrated criteria for reliable and accurate algorithms that cater to the different multiscale nonlinear physics. This includes but is not limited to the construction of appropriate adaptive spatial and temporal discretizations that are suitable for the underlying governing equations. In addition, a multiresolution wavelets approach for adaptive numerical dissipation/filter controls for high speed turbulence, acoustics and combustion simulations will be sought. These steps are corner stones for guarding against spurious numerical solutions that are solutions of the discretized counterparts but are not solutions of the underlying governing equations.

Yee, H. C.↗

2007 Time_Dependent Density-Functional Therory (July 15-20, 2007 Colby College, Maine)

Time-dependent density-functional theory (TDDFT) provides an efficient, elegant, and formally exact way of describing the dynamics of interacting many-body quantum systems, circumventing the need for solving the full time-dependent Schroedinger equation. In the 20 years since it was first rigorously established in 1984, the field of TDDFT has made rapid and significant advances both formally as well as in terms of successful applications in chemistry, physics and materials science. Today, TDDFT has become the method of choice for calculating excitation energies of complex molecules, and is becoming increasingly popular for describing optical and spectroscopic properties of a variety of materials such as bulk solids, clusters and nanostructures. Other growing areas of applications of TDDFT are nonlinear dynamics of strongly excited electronic systems and molecular electronics. The purpose and scope of this Gordon Research Conference is to provide a platform for discussing the current state of the art of the rapidly progressing, highly interdisciplinary field of TDDFT, to identify and debate open questions, and to point out new promising research directions. The conference will bring together experts with a diverse background in chemistry, physics, and materials science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methodology of Materials Discovery in Complex Metal Hydrides Using Experimental and Computational Tools

We present a review of the experimental and theoretical methods used in the discovery of new metal-hydrogen materials systems for hydrogen storage applications. Rather than a comprehensive review of all new materials and methods used in the metal hydride community, we focus on a specific subset of successful methods utilizing theoretical crystal structure prediction methods, computational approaches for screening large numbers of compound classes, and medium-throughput experimental methods for the preparation of such materials. Monte Carlo techniques paired with a simplified empirical Hamiltonian provide crystal structure candidates that are refined using Density Functional Theory. First-principle methods using high-quality structural candidates are further screened for an estimate of reaction energetics, decomposition enthalpies, and determination of reaction pathways. Experimental synthesis utilizes a compacted-pellet sintering technique under high-pressure hydrogen at elevated temperatures. Crystal structure determination follows from a combination of Rietveld refinements of diffraction patterns and first-principles computation of total energies and dynamical stability of competing structures. The methods presented within are general and applicable to a wide class of materials for energy storage.

08 HYDROGEN↗

High T{sub c} in cuprates as a universal property of the electron–phonon system

The Eliashberg theory, which is generalized due to peculiar properties of the finite-width electron band for electron–phonon (EP) systems with a variable electron density of states (DOS), as well as with allowance for the electron–hole nonequivalence of the frequency behavior of the chemical potential renormalization depending on the doping level and electron correlations in the vertex function, is used to study T{sub c} in cuprates. The phonon contribution to the nodal anomalous electron Green’s function (GF) is considered. Pairing within the total width of the electron band, and not only in a narrow layer at the Fermi surface, is taken into account. The calculated frequency and temperature dependences, as well as the dependence on the doping level of the complex renormalization ReZ, ImZ of the mass, complex renormalization Reχ(ω), Imχ(ω) of the chemical potential, and DOS N(ε) renormalized due to the EP interaction are used to calculate the electron nodal anomalous GF. It is found that the effect of suppressing the high-frequency contribution to the Eliashberg equations derived anew for the EP system with a finite width of the electron band is a decisive factor for the manifestation of the effect of high-temperature superconductivity (HTSC). It is shown that in the vicinity of the optimal hole-type doping level in cuprates, the high value of T{sub c} is reproduced by the spectral function of the electron–phonon interaction, which is obtained from tunneling experiments. Upon an increase in the doping level, leading to an increase in the degree of electron–hole nonequivalence, the new logarithmic term appearing in the equations for T{sub c} has a tendency to increase T{sub c}, while intensification of damping of charge carriers (especially suppression of the cutoff factor) leads to a decrease in T{sub c}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromagnetic energy, absorption, and Casimir forces: Uniform dielectric media in thermal equilibrium

The derivation of Casimir forces between dielectrics can be simplified by ignoring absorption, calculating energy changes due to displacements of the dielectrics, and only then admitting absorption by allowing permittivities to be complex. As a first step toward a better understanding of this situation we consider in this article the model of a dielectric as a collection of oscillators, each of which is coupled to a reservoir giving rise to damping and Langevin forces on the oscillators and a noise polarization acting as a source of a fluctuating electromagnetic field in the dielectric. The model leads naturally to expressions for the quantized electric and magnetic fields that are consistent with those obtained in approaches that diagonalize the coupled system of oscillators for the dielectric medium, the reservoir, and the electromagnetic field. It also results in a fluctuation-dissipation relation between the noise polarization and the imaginary part of the permittivity; comparison with the Rytov fluctuation-dissipation relation employed in the well-known Lifshitz theory for the van der Waals (or Casimir) force shows that the Lifshitz theory is actually a classical stochastic electrodynamical theory. The approximate classical expression for the energy density in a band of frequencies at which absorption in a dielectric is negligible is shown to be exact as a spectral thermal equilibrium expectation value in quantum electrodynamic theory. Our main result is the derivation of an expression for the QED energy density of a uniform dispersive, absorbing media in thermal equilibrium. The spectral density of the energy is found to have the same form with or without absorption. We also show how the fluctuation-dissipation theorem ensures a detailed balance of energy exchange between the (absorbing) medium, the reservoir, and the electromagnetic field in thermal equilibrium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge-Transfer Versus Charge-Transfer-Like Excitations Revisited

Criteria to assess charge-transfer (CT) and `CT-like' character of electronic excitations are examined. Time-dependent density functional theory (TDDFT) with non-hybrid, hybrid, and tuned long-range corrected (LC) functionals is compared with with coupled-cluster (CC) benchmarks. The test set includes an organic CT complex, two `push-pull' donor-acceptor chromophores, a cyanine dye, and several polycyclic aromatic hydrocarbons. Proper CT is easily identified. Excitations with significant density changes upon excitation within regions of close spatial proximity can also be diagnosed. For such excitations, the use of LC functionals in TDDFT sometimes leads to dramatic improvements of the singlet energies, similar to proper CT, which has led to the concept of `CT-like' excitations. However, `CT-like' excitations are not like charge transfer, and the improvements are not obtained for the right reasons. The triplet excitation energies are underestimated for all systems, often severely. For the `CT-like' candidates, when going from a non-hybrid to an LC functional the error in the singlet-triplet (S/T) separation changes from negative to positive, providing error compensation. For the cyanine, the S/T separation is too large with all functionals, leading to the best error compensation for non-hybrid functionals.

Charge-transfer↗