Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

CsO x Nanostructures on Au(111): Morphology- and Size-dependent Activity for the Water–Gas Shift Reaction

Alkali oxides are typically used as promoters of heterogeneous catalysts for the water–gas shift (WGS; H 2 O + CO → H 2 + CO 2 ) reaction. On Au(111), CsO x exhibits diverse nanostructures at varying coverages, as revealed by scanning tunneling microscopy. Clusters of cesium oxide (Cs 2 O 2 ) nucleate at elbow sites of the Au(111) herringbone when θ Cs is less than 0.1 ML. Subsequently, these clusters transform into two-dimensional (2D) islands (Cs 2 O, Cs 2 O 2 , CsO 2 ) as the cesium coverage increases (θ Cs > 0.1 ML). Both types of CsO x nanostructures enable the WGS process on Au(111). The highest activity was seen for the cesium oxide clusters which facilitated the partial dissociation of water and binding of CO. The CO ads and OH ads groups were not strongly bound and probably reacted to yield a short-lived HOCO intermediate that led to gaseous H 2 and CO 2 . The 2D islands of CsO x also enabled the WGS but their efficiency was reduced due to the formation of cesium hydroxide compounds (limiting mobility of OH groups) and the generation of CO 3 and C species (blocking of active centers). The fact that the performance of the CsO x /Au(111) catalysts changed dramatically with variations in the chemical properties of the CsO x nanostructures indicates that the alkali oxide was an integral part of the active phase, playing a central role in the activation and conversion of the reactants. To attach the label of “promoter” to CsO x is a simplification that does not help in the design and optimization of catalysts for C1 chemistry. In conclusion, to achieve a rational design, one must consider the structural and chemical properties of the alkali oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mapping Local Dissipation and Entropy Production in Complex and Active Fluids

While global entropy production provides a measure of irreversibility, its partitioning into contributions from local regions is key to understanding the mechanisms underlying time-reversal symmetry breaking in complex systems and active matter. Here, by analyzing local heat flows and fluxes, we propose a framework that enables the mapping of local dissipation and entropy production in a nonequilibrium system. We test this approach in simulations of fluids driven through complex environments and active systems. We connect the results across the local and global scales by showing that local dissipation and entropy production satisfy a local version of the usual (global) fluctuation theorem, which accounts for the correlations between the local region and its surroundings. Interestingly, in the case of the active fluid, our analysis reveals that these correlations are of opposite signs for the active (stochastic) and passive (deterministic) contributions to local dissipation.

Entropy↗
DOE OSTI2025

2,4,6-Triphenylpyridinium-Substituted Neutral Nickel Catalysts: Ethylene Polymerization, Influence of Activator, Catalyst Decomposition, and End-Group Analysis

The reactivity of 2,4,6-triphenylpyridinium-substituted nickel(II)-salicyliminato catalysts in ethylene polymerization has been explored. Here, the known complex 6a equipped with a 2,6-diisopropylphenyl group affords polyethylene with M n = 10-12 kDa at 19 ⁰C, while 8a possessing the bulkier 2,6-diphenylphenyl moiety gives polymer with M n = 270-310 kDa. The stability of catalyst 6a depends on the borane activator. If B(C 6 F 5 ) 3 is employed, enhanced stability is observed compared with using 3H 2 O·B(C 6 F 5 ) 3 activator. Catalyst 6a decomposes forming a hydroxyl-bridged dimer 14 which may be reac-tivated, albeit inefficiently, by excess borane activator. Polymer formed by 6a contains ca. 3-6% of 2-trifluoromethylphenyl, pentafluorophenyl, and 3,5-bis(trifluoromethyl)phenyl end groups combined. The pentafluoro-phenyl end group originates from reaction of 6a with borane activator, and from reactivation of hydroxyl-bridged dimer 14. 3,5-Bis(trifluoromethyl)phenyl end groups are likely formed in a reaction sequence initiated by protonation of one aryl group in NaBArF which creates B[C 6 H 3 (CF 3 ) 2 ] 3 . The triarylborane can then react with 6a or 14 transferring the 3,5-bis(trifluoromethyl)phenyl group to nickel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

One-Step Facile Synthesis of High-Activity Nitrogen-Doped PtNiN Oxygen Reduction Catalyst

PtM alloy electrocatalysts (M = Fe, Co, Ni) have been the subject of many investigations aimed at increasing their attractive properties, in particular oxygen reduction reaction (ORR) activity, while reducing total platinum-group-metal content and improving durability. Despite some success, these catalysts still have relatively high Pt content and lack the necessary durability as M metals leach out from the alloys during potential cycling. Previously, we synthesized nitrogen (N)-doped PtMN/C catalysts consisting of thin Pt shells on M nitride cores by a two-step method, which showed higher ORR activity and stability than their PtM counterparts. In the present work, we developed a facile one-step synthesis method, which comprises a single thermal annealing process of the N-doped PtNiN/C alloy. The ORR performance of the one-step synthesized PtNiN/C catalyst is much higher than that of the two-step synthesized PtNiN/C, as revealed by rotating disk electrode measurements. Membrane electrode assembly fuel cell testing demonstrated superb durability and high activity. Formation of Pt monolayer shells on the nitrided (Pt x Ni 1-x ) 4 N cores was confirmed by in situ X-ray absorption spectroscopy. The origins of the enhanced activity and stability of the one-step synthesized PtNiN/C catalyst are elucidated based on density functional theory calculations together with the experimental results.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Detailed Characterization of an Annealed Reduced Graphene Oxide Catalyst for Selective Peroxide Formation Activity

Recently, electrochemical hydrogen peroxide (H 2 O 2 ) generation from oxygen molecules has been extensively studied. Thus far, the best peroxide activity under alkaline conditions has been reported at the surface of a mild reduced graphene oxide annealed at 600 °C (mrGO-600). However, the detailed material information, such as chemical functionality and structural morphology, is unknown, which results in ambiguous debates on its catalytic active sites. Therefore, to solve this problem, we intensively characterize the structure of mrGO-600 to clarify the origin of its catalytic activity. Various characterizations, including X-ray photoelectron spectroscopy, Raman spectroscopy, infrared spectroscopy, near-edge X-ray absorption fine spectroscopy, and high-resolution transmittance electron microscopy coupled with in situ infrared spectroelecrochemistry, reveal that the annealing process generates not only various hole edge defects that are related to the ring ether group but also numerous point defects that result in a small-sized disconnected graphitic carbon region. These defects are believed to form a unique atomic level configuration in mrGO-600, which enables it to facilitate high peroxide-generated activity from oxygen molecules in an alkaline electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing Active Sites in Cu x Pd y Cluster Catalysts by Machine-Learning-Assisted X-ray Absorption Spectroscopy

Size-selected clusters are important model catalysts because of their narrow size and compositional distributions, as well as enhanced activity and selectivity in many reactions. Still, their structure-activity relationships are, in general, elusive. The main reason is the difficulty in identifying and quantitatively characterizing the catalytic active site in the clusters when it is confined within subnanometric dimensions and under the continuous structural changes the clusters can undergo in reaction conditions. Using machine learning approaches for analysis of the operando X-ray absorption near-edge structure spectra, we obtained accurate speciation of the Cu x Pd y cluster types during the propane oxidation reaction and the structural information about each type. As a result, we elucidated the information about active species and relative roles of Cu and Pd in the clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Activity Convergence between Continuous- and Pulsed-Deposition NiFe Hydroxide Anodes in Liquid Alkaline Electrolyzers

Improving the activity of anodes for the alkaline oxygen evolution reaction (OER) is of interest because of the importance of the reaction in electrochemical technology. There is an abundance of studies which confirm that NiFe hydroxide, often prepared by electrodeposition, is the most active catalyst for the alkaline OER. This relatively high level of confidence in the optimal OER catalyst chemistry suggests that exploration of methods which improve on features besides the chemistry of the films, such as their microstructure, could access new heights of activity. In this study, the possible benefits of pulsed current deposition relative to the conventional continuous current approach to the deposition of NiFe hydroxides were investigated. Pulsed deposition densified the film surfaces by preventing metal ion depletion at the electrode surface during film formation. The Fe content, redox reversibility, and OER activity were higher for the pulsed deposition films relative to their continuous deposition counterparts. Though pulsed deposition imparted a higher OER performance of the films compared to continuous deposition at the three-electrode level, this improved performance was not retained during electrolyzer operation. Rather, a convergence of the cell performance is seen irrespective of the deposition approach. This phenomenon was attributed to the way electrolyzer conditionsrelatively high temperature, base concentration, and current densitycan drive alternate mechanisms for observed performance.

08 HYDROGEN↗
DOE OSTI2020

Insights into the Structure–Activity Relationships in Metal–Organic Framework-Supported Nickel Catalysts for Ethylene Hydrogenation

Solid supports play an indispensable role in heterogeneous catalysis, as they can directly affect the catalytic activity and selectivity of supported catalysts. However, the specific roles of such supports remain to be demystified owing to the difficulties in obtaining precise structural information on supported catalysts. To understand the effects of MOF topology, pore environment, and metal identity of node supports on the catalytic activity, a Ni catalyst was supported on eight Zr- or Hf-MOFs based on 8-connected nodes: namely M-NU-1200, M-NU-1000, M-NU-1008, and M-NU-1010 (M = Zr, Hf). Single-crystal X-ray diffraction (SCXRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and X-ray photoelectron spectroscopy (XPS) were employed to characterize the supported catalyst structures. To investigate the support effects on their activities, the supported Ni catalysts were evaluated by using ethylene hydrogenation as a model reaction. The results revealed that all Hf-based-MOF-supported Ni catalysts exhibited higher catalytic reactivity with TOF (turnover frequency) values at least double of those isostructural Zr counterparts. Additionally, MOFs with less congested metal anchoring sites, as a result of the topology and surrounding pore environment, yielded higher TOFs, suggesting the importance of supports in dictating both the catalyst accessibility and activity. Computational analysis complemented the experimental observations and provided insights into reaction barrier differences and their performance variation. Furthermore, this study demonstrates the essential role of the supports and provides a thought for selecting/designing suitable supports in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Insights into the Surface Electronic Structure and Catalytic Activity of InO x /Au(111) Inverse Catalysts for CO 2 Hydrogenation to Methanol

In this article, the direct conversion of carbon dioxide (CO 2 ) into methanol (CH 3 OH) via low-temperature hydrogenation is crucial for recycling anthropogenic CO 2 emissions and producing fuels or high value chemicals. Nevertheless, it continues to be a great challenge due to the trade-off between selectivity and catalytic activity. For CO 2 hydrogenation, In 2 O 3 catalysts are known for their high CH 3 OH selectivity. Subsequent studies explored depositing metals on In 2 O 3 to enhance CO 2 conversion. Despite extensive research on metal (M) supported In 2 O 3 catalysts, the role of In-M alloys and M/In 2 O 3 interfaces in CO 2 activation and CH 3 OH selectivity remains unclear. In this work, we have examined the behavior of In/Au(111) alloys and InO x /Au(111) inverse systems during CO 2 hydrogenation using synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and catalytic tests in a batch reactor. Indium forms alloys with Au(111) after deposition. The In-Au(111) alloys display high reactivity towards CO 2 and can dissociate the molecule at room temperature to generate InO x nanostructures. At very low coverages of In (≤ 0.05 ML), the InO x nanostructures are not stable under CO 2 hydrogenation conditions and the active In-Au(111) alloys produces mainly CO and little methanol. An increase in indium coverage to 0.3 ML led to stable InOx nanostructures under CO 2 hydrogenation conditions. These InO x /Au(111) catalysts displayed a high selectivity (~ 80 %) towards CH 3 OH production and an activity for CO 2 conversion that was at least 10 times larger than that of plain In 2 O 3 or Cu(111) and Cu/ZnO(000$\overline{1)}$ benchmark catalysts. The results of AP-XPS show that InO x /Au(111) produces methanol via methoxy intermediates. Inverse oxide/metal catalysts containing InOx open up a possibility for improving CO 2 → CH 3 OH conversion in processes associated with the control of environmental pollution and the production of high value chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mesoporous Amorphous High-Entropy Oxide Films: Unlocking Enhanced Redox Activity

High-entropy oxides (HEOs) represent a frontier in catalyst design via entropy-stabilized solid solution formation. However, their catalytic efficiency is limited by their bulk and dense nature. This work presents a strategic approach to tackle this challenge by fabricating mesoporous amorphous HEO films (MA-HEOF) possessing maximized active site utilization efficiency. The success hinges on the as-developed geometric engineering strategy via controlled deposition–precipitation to confine the amorphous HEO thin film on the surface of mesoporous channels. The unique structure of MA-HEOF was elucidated via microscopy-, X-ray-, and neutron-based techniques, which were manifested by enriched surface-activated lattice oxygen and enhanced redox activity, as confirmed by isotope studies. Besides, the MA-HEOF could stabilize and modulate the properties of integrated noble metal sites, enhancing their redox activity in diverse reactions. In conclusion, the approaches and insights presented herein provide guidance on maximizing the utilization efficiency of high-entropy materials in catalysis and beyond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Discovering Ni/Cu Single-Atom Alloy as a Highly Active and Selective Catalyst for Direct Methane Conversion to Ethylene: A First-Principles Kinetic Study

Direct methane conversion to liquid fuels or value-added chemicals is a promising technology to utilize natural resources without resorting to further petroleum extraction. However, discovering efficient catalysts for this reaction is challenging due to either coke formation or unfavorable C-H bond activation. Herein, we design single-atom alloy (SAA) catalysts to simultaneously eliminate the above two bottlenecks based on mechanism-guided strategies: (1) the active single atom enables favorable C-H bond breaking and (2) the less reactive host metal facilitates C-C coupling and thus avoids strong binding of carbonaceous species. Employing electronic structure theory calculations, we screened the stability of multiple SAAs with 3d-5d transition metals atomically dispersed on a copper surface in terms of avoiding dopant aggregation and segregation. We then evaluated reactivities of the stable SAAs as catalysts for direct methane conversion to C2 products, including methane dehydrogenation and C-C coupling mechanisms. Combining selectivity analysis with kinetic modeling, we predicted that nickel dispersed on copper, i.e., Ni/Cu SAA, is a highly active and selective catalyst that can efficiently transform methane to ethylene. This work designs efficient SAA catalysts for direct methane activation and provides chemical insights into engineering compositions of SAAs to tune their catalytic performances.

Kothakonda, Manish↗
DOE OSTI2021

Synthase-Selective Exploration of a Tunicate Microbiome by Activity-Guided Single-Cell Genomics

While thousands of environmental metagenomes have been mined for the presence of novel biosynthetic gene clusters, such computational predictions do not provide evidence of their in vivo biosynthetic functionality. Using fluorescent in situ enzyme assay targeting carrier proteins common to polyketide (PKS) and nonribosomal peptide synthetases (NRPS), we applied fluorescence-activated cell sorting to tunicate microbiome to enrich for microbes with active secondary metabolic capabilities. Single-cell genomics uncovered the genetic basis for a wide biosynthetic diversity in the enzyme-active cells and revealed a member of marine Oceanospirillales harboring a novel NRPS gene cluster with high similarity to phylogenetically distant marine and terrestrial bacteria. Interestingly, this synthase belongs to a larger class of siderophore biosynthetic gene clusters commonly associated with pestilence and disease. Furthermore, this demonstrates activity-guided single-cell genomics as a tool to guide novel biosynthetic discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

The Novel Carbapenem, JDB/PQ-1-219, Has Potent Broad Spectrum Activity against Multi-Drug Resistant Acinetobacter baumannii

Carbapenem resistance in Acinetobacter baumannii, driven largely by class D, along with class A and class B β- lactamases, has severely compromised the utility of these last resort antibiotics. As a result, infections caused by such pathogens are characterized by extremely high mortality rates. Here we describe the antimicrobial activity of the novel C5 methyl-substituted carbapenem JDB/PQ-1−219 against multidrug resistant A. baumannii and the mechanism of its interaction with its major carbapenemase, OXA-23. JDB/PQ-1-219 exhibits potent antimicrobial activity against A. baumannii producing various carbapenemases, with MICs that are all in the clinically susceptible range. The compound has unrestricted ingress through porins and avoids egress by efflux pumps, a unique property when compared to all commercial carbapenems. Kinetic experiments demonstrated that unlike for other carbapenems, acylation of OXA-23 by JDB/ PQ-1-219 is monophasic, and mass spectrometry studies showed that this results from the conversion of all enzyme into a reversible tetrahedral intermediate which gradually transitions into the stable acyl-enzyme complex. No deacylation of this complex is observed over a physiologically relevant time period, making JDB/PQ-1−219 an extremely potent inhibitor of OXA-23. Time-resolved crystallography revealed fine details of active site dynamics, leading to complete inhibition of the enzyme. Together, these studies identify JDB/PQ-1-219 as a uniquely effective novel carbapenem with clinically significant levels of activity against multidrug resistant A. baumannii.

Acinetobacter baumannii↗
DOE OSTI2025

Chemical Activation of Frontal Ring-Opening Metathesis Polymerization

In this study, we present an innovative approach to frontal ring-opening metathesis polymerization (FROMP) through chemical activation. By locally concentrating Grubbs-type initiators, we accelerate exothermic polymerization at the activation site. Sufficient thermal energy initiates a polymerization front that travels through the remainder of the sample even with reduced initiator concentrations in the bulk resin. Initiation location and timing are controlled by adjusting the initiator reactivity, the properties of the transport solvent, and the air–resin interface. Our technique enables multipoint front activation, either through synchronized injection or by timing the relative reactivity of various initiators. This accessible method of chemical activation enables on-demand production of polymer and composite materials using only the thermal energy generated by the reaction, removing the need for external power sources and enabling deployment in remote or infrastructure-limited environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Promoting Atomically Dispersed MnN 4 Sites via Sulfur Doping for Oxygen Reduction: Unveiling Intrinsic Activity and Degradation in Fuel Cells

Carbon supported and nitrogen coordinated single Mn site catalysts (Mn-N-C) catalysts are the most desirable platinum group metal (PGM)-free cathode catalysts for proton exchange membrane fuel cells (PEMFCs) due to their insignificant Fenton reactions (vs. Fe), earth abundances (vs. Co) and encouraging activity and stability. However, current Mn-N-C catalysts suffer from high over-potential due to low intrinsic activity and less dense MnN 4 sites. Herein, we present sulfur-doped Mn-N-C catalyst (Mn-N-C-S) synthesized through an effective adsorption-pyrolysis process. Using electron microscopy and X-ray absorption spectroscopy (XAS) techniques, we verify the uniform dispersion of MnN 4 sites and confirm the effect of S doping on the Mn-N coordination. The Mn-N-C-S catalyst exhibits a favorable oxygen reduction reaction (ORR) activity in acidic media relative to the S-free Mn-N-C catalyst. The corresponding membrane electrode assembly (MEA) generated a remarkable performance with a peak power density of 500 mW cm -2 under a realistic H 2 /air environment. The constant voltage tests of fuel cells confirm the much-enhanced stability of the Mn-N-C-S catalyst compared to the Fe-N-C and Fe-N-C-S catalysts. The electron microscopy and Fourier transform XAS analysis provide insights into catalyst degradation associated with Mn oxidation and agglomeration. The theoretical calculation elucidates that the promoted ORR activity is mainly attributed to the spatial effect stemmed from the repulsive interaction between the ORR intermediates and adjacent S do-pants.

25 ENERGY STORAGE↗
DOE OSTI2022

Low-Tortuosity Thick Electrodes with Active Materials Gradient Design for Enhanced Energy Storage

The ever-growing energy demand of modern society calls for the development of high-loading and high-energy-density batteries, and substantial research efforts are required to optimize electrode microstructures for improved energy storage. Low-tortuosity architecture proves effective in promoting charge transport kinetics in thick electrodes; however, heterogeneous electrochemical mass transport along the depth direction is inevitable, especially at high C-rates. In this work, we create an active material gradient in low-tortuosity electrodes along ion-transport direction to compensate for uneven reaction kinetics and the nonuniform lithiation/delithiation process in thick electrodes. The gradual decrease of active material concentration from the separator to the current collector reduces the integrated ion diffusion distance and accelerates the electrochemical reaction kinetics, leading to improved rate capabilities. Further, the structure advantages combining low-tortuosity pores and active material gradient offer high mass loading (60 mg cm –2 ) and enhanced performance. Comprehensive understanding of the effect of active material gradient architecture on electrode kinetics has been elucidated by electrochemical characterization and simulations, which can be useful for development of batteries with high-energy/power densities.

25 ENERGY STORAGE↗
DOE OSTI2024

Biomimetic Control over Bimetallic Nanoparticle Structure and Activity via Peptide Capping Ligand Sequence

Here, the controlled design of bimetallic nanoparticles (BNPs) is a key goal in tailoring their catalytic properties. Recently, biomimetic pathways demonstrated potent control over the distribution of different metals within BNPs, but a direct understanding of the peptide effect on the compositional distribution at the interparticle and intraparticle levels remains lacking. We synthesized two sets of PtAu systems with two peptides and correlated their structure, composition, and distributions with the catalytic activity. Structural and compositional analyses were performed by a combined machine learning-assisted refinement of X-ray absorption spectra and Z-contrast measurements by scanning transmission electron microscopy. The difference in the catalytic activities between nanoparticles synthesized with different peptides was attributed to the details of interparticle distribution of Pt and Au across these markedly heterogeneous systems, comprising Pt-rich, Au-rich, and Au core/Pt shell nanoparticles. The total amount of Pt in the shells of the BNPs was proposed to be the key catalytic activity descriptor. This approach can be extended to other systems of metals and peptides to facilitate the targeted design of catalysts with the desired activity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced Electrocatalytic Hydrogen Evolution Activity in Single-Atom Pt-Decorated VS 2 Nanosheets

Enhancing catalytic activity by decorating noble metals in catalysts provides an opportunity for promoting the electrocatalytic hydrogen evolution reaction (HER) application. However, there are few systematic studies on regulating the structures of noble metals in catalytic materials and investigating their influence on HER. Herein, Pt catalysts with different structures including single atoms (SAs), clusters, and nanoparticles well-controllably anchored on VS 2 nanosheets through a cost-effective optothermal method are reported, and their HER performance is studied. The most efficient Pt-decorated VS 2 catalyst (with both Pt SAs and clusters) delivers an overpotential of 77 mV at 10 mA cm –2 , close to that of Pt/C (48 mV). However, the optimal mass activity of Pt (normalizing to Pt content) is obtained from only SA Pt-decorated VS 2 (i.e., 22.88 A mg Pt –1 at 200 mV) and is 12 times greater than that of the Pt/C (1.87 A mg Pt –1 ), attributed to the greatly enhanced Pt utilization. Additionally, the theoretical simulations reveal that Pt SA decoration makes the adsorption free energy of H* closer to the thermoneutral value and improves the charge-transfer kinetics, significantly enhancing HER activity. Furthermore, this work offers a pathway to prepare the desired catalyst based on synergy of Pt structures and VS 2 and reveals the intrinsic mechanism for enhancing catalytic activity, which is important for HER applications.

36 MATERIALS SCIENCE↗