Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transversity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Three-dimensional flow studies on a slotted transonic wind tunnel wall

Three-dimensional flow field measurements were made near a transonic slotted wall. Field velocity vectors and static pressure distributions have been obtained. The boundary layer displacement thickness was found to vary in the transverse plane with its maximum at the slot center line but decreased with increasing suction rate through the slot. The boundary layer characteristics were sensitive to the mass transfer through the slot. The projection on the flow field velocity vectors on the transverse plane reveals a vortex-like flow formation. The center of this secondary flow was located nearly at the edge of the wall shear layer and decreased in strength with applied suction. The secondary vortex motion may be attributed to the mean flow skewing, inhomogeneous transverse plane boundary layer and the wall turbulence anisotropy.

Wu, J. M.↗
NASA NTRS1982

Particle drift, diffusion, and acceleration at shocks

The gradient and curvature drifts implicit in change of the ambient magnetic field at a hydromagnetic shock wave are incorporated into the diffusive theory of shock acceleration of charged particles. The conventional jump condition at the shock is modified by a term incorporating the large drift along the shock plane. This term vanished identically for one-dimensional systems, but must be included in general for shocks which are finite in transverse extent or which have transverse structure. It is found that the effect of the drift is such that the transverse drift rate is proportional to the acceleration rate, and for perpendicular shocks is exactly equal to the rate of change of energy in the V x B electric field observed in the shock frame. This establishes a connection with the 'shock drift' models which neglect diffusion.

Jokipii, J. R.↗
NASA NTRS1982

Dilution Jet Mixing Program, phase 1

The effect of jet to mainstream density ratio, flow area convergence as encounted in transition sections, and nonuniform mainstream profile upstream of dilution orifices on the mixing of a row of jets with a confined cross flow was quantified. It is found that: (1) jet spreading rate in transverse direction is increased with increasing J, H/D and with decreasing S/D; (2) the density ratio has only a second order effect on the jet mixing characteristics for a constant momentum ratio; (3) the temperature distributions in the jet mixing region are strongly influenced by the undisturbed mainstream profile; (4) flow area convergence enhances mixing in radial and transverse directions. An asymmetric convergent duct with flat wall injection has the same jet mixing characteristics as a symmetric convergent duct. An asymmetric convergent duct with slant wall injection has a faster jet spreading rate in the transverse direction.

Srinivasan, R.↗
NASA NTRS1983

The mass dependence of wave particle interactions as observed with the ISEE-1 energetic ion mass spectrometer

Simultaneous measurements of the O(+) and H(+) distributions from two transverse acceleration events in the high altitude auroral ionosphere are presented. The data were acquired from the energetic ion mass spectrometer on the ISEE-1 satellite, in the dusk sector, on auroral field lines (L = 8-9), at geocentric radial distances of about 3 earth radii. Temporal and/or spatial fluctuations during the measurement cycle resulted in some scatter of the data points, but the transverse velocity distributions are reasonably well represented by maxwellians at energies in the few hundred eV range. The transverse temperatures were about 60 eV in both cases and no significant differences were observed between the temperatures of the O(+) and H(+). The flux intensities of the two ion species were also generally comparable.

Sharp, R. D.↗
NASA NTRS1983

Wrinkling phenomenon in structures. I - Model formulations

Those structural element models which can suffer the wrinkling phenomenon are analyzed. A laminated elastic material, defined as a one-parametrical family of surfaces whose in-plane strains are negligible in comparison to the strains in the transverse direction, is analyzed in terms of its geometry, geometrical compatibility equations, layer geometry, kinematics, kinematical compatibility equations, and governing dynamical equations. These aspects are also examined for the case of a soft shell, defined as a shell for which the in-plane strains of the middle surface are negligible compared to the strains in the transverse direction, and for the case of a soft rod, defined as a rod for which the strains along the axis are negligible compared to the strains in the transverse direction. The influence of internal fluid flow on the wrinkling phenomenon for layers of laminated material and for a flexible pipe containing an inviscid and incompressible fluid is also analyzed.

Zak, M.↗
NASA NTRS1984

Hygrothermal effects on mechanical behavior of graphite/epoxy laminates beyond initial failure

An investigation was conducted to determine the critical load levels and associated cracking beyond which a multidirectional laminate can be considered as structurally failed. Graphite/epoxy laminates were loaded to different strain levels up to ultimate failure. Transverse matrix cracking was monitored by acoustic and optical methods. Residual stiffness and strength that were parallel and perpendicular to the cracks were determined and related to the environmental/loading history. Results indicate that cracking density in the transverse layers has no major effect on laminate residual properties as long as the angle ply layers retain their structural integrity. Exposure to hot water revealed that cracking had only a small effect on absorption and reduced swelling when these specimens were compared with uncracked specimens. Cracked, moist specimens showed a moderate reduction in strength when compared with their uncracked counterparts. Within the range of environmental/loading conditions of the present study, it is concluded that the transverse cracking process is not crucial in its effect on the structural performance of multidirectional composite laminates.

Ishai, O.↗
NASA NTRS1984

Maximum likelihood estimation of turbulence spectrum parameters

Estimation of the integral scale and intensity of a generic turbulence record is treated as a statistical problem of parameter estimation. Properties of parameter estimators and the method of maximum likelihood are reviewed. Likelihood equations are derived for estimation of the integral scale and intensity applicable to a general class of turbulence spectra that includes the von Karman and Dryden transverse and longitudinal spectra as special cases. The method is extended to include the Bullen transverse and longitudinal spectra. Coefficients of variation are given for maximum likelihood estimates of the integral scale and intensity of the von Karman spectra. Application of the method is illustrated by estimating the integral scale and intensity of an atmospheric turbulence vertical velocity record assumed to be governed by the von Karman transverse spectrum.

Mark, W. D.↗
NASA NTRS1984

Dynamic analysis of laminated plates using a higher-order theory

This paper deals with the dynamic analog of the higher-order shear deformation plate theory developed by the senior author. The theory is based on a displacement field in which the inplane displacements are expanded as cubic functions of the thicknes coordinate and the transverse deflection is assumed to be constant through the thickness. The additional dependent unkowns introduced with the quadratic and cubic terms of the thickness coordinate are eliminated by requiring the transverse shear stresses to vanish on the bounding planes of the plate. The theory accounts for the parabolic distribution of the transverse shear stresses, and hence no shear correction coefficients are required.

Reddy, J. N.↗
NASA NTRS1984

VLA observations of fine structures in a solar active region at 6 centimeter wavelength

A complex solar active region at 6 cm has been observed with the VLA. Radio images of the region have been constructed and compared with simultaneous optical data from the region. It is found that all radio sources are associated with either sunspots or regions of the corona where strong transverse magnetic fields are likely, that the transverse field sources are brighter than the sunspot sources, and that some of the sunspot sources have a polarized ring structure. The observations are interpreted in terms of thermal gyroresonance emission, with the radiation from the transverse field sources being at the third harmonic of the gyrofrequency and predominantly at the second harmonic from the sunspot sources.

Mcconnell, D.↗
NASA NTRS1983

An endochronic model for the response of unidirectional composites under off-axis tensile load

A methodology of modelling both nonlinear elastic and dissipative response of transversely isotropic fibrous composites is developed and illustrated with the aid of the observed response of graphite-polyimide off-axis coupons. The methodology is based on the internal variable formalism employed within the text of classical irreversible thermodynamics and entails extension of Valanis' endochronic theory to transversely isotropic media. Applicability of the theory to prediction of various response characteristics of fibrous composites is illustrated by accurately modelling such often observed phenomena as: stiffening reversible behavior along fiber direction; dissipative response in shear and transverse tension characterized by power-laws with different hardening exponents; permanent strain accumulation; nonlinear unloading and reloading; and stress-interaction effects.

Pindera, M. J.↗
NASA NTRS1984

The Chemical Nature of the Fiber/resin Interface in Composite Materials

Carbon fiber/epoxy resin composites are considered. The nature of the fiber structure and the interaction that occurs at the interface between fiber and matrix are emphasized. Composite toughness can be improved by increased axial tensile and compressive strengths in the fibers. The structure of carbon fibers indicates that the fiber itself can fail transversely, and different transverse microstructures could provide better transverse strengths. The higher surface roughness of lower modulus and surface-treated carbon fibers provides better mechanical interlocking between the fiber and matrix. The chemical nature of the fiber surface was determined, and adsorption of species on this surface can be used to promote wetting and adhesion. Finally, the magnitude of the interfacial bond strength should be controlled such that a range of composites can be made with properties varying from relatively brittle and high interlaminar shear strength to tougher but lower interlaminar shear strength.

Diefendorf, R. J.↗
NASA NTRS1985

Diagnosis of ageostrophic circulations in a two-dimensional primitive equation model of frontogenesis

A two-dimensional primitive equation frontogenesis model is applied to the identification of dynamical mechanisms which contribute to transverse ageostrophic circulation in warm and cold advection situations. Attention is focused on conditions conducive to significant alongfront ageostrophic flow with divergence confined to the transverse plane. The circulation is partitioned as a function of forcing mechanisms accompanied by confluence, horizontal shear and the alongfront component of the ageostrophic wind. A series of diagnostic equations is defined for the transverse geostrophic circulation and instantaneous contribution from each partitioned component of the circulation are quantified. In the cold advection case, results are obtained which are consistent with positive feedback between the subsidence pattern and forcing by horizontal shear.

Keyser, D.↗
NASA NTRS1985

p(2 x 2) and c(2 x 2) coverages of Cl and F on Ni(100), a comparison with O and S on Ni(100)

The rigid lattice adsorbate vibrational frequency normal to the surface, omega(e,r) and height above the surface, R(transverse), are computed for p(2 x 2) (0.25 ML) and c(2 x 2) (0.5 ML) coverages of Cl and F. These calculations show a small change in omega(e,r) and a small increase in R(transverse) with increased coverage. The bonding of Cl and F is compared to that found for O and S, both of which show a decrease in R(transverse) and O which shows a larger shift in omega(e,r).

Bauschlicher, C. W., Jr.↗
NASA NTRS1986

Creep properties of PWC-11 base metal and weldments as affected by heat treatment

In a preliminary study using single specimens for each condition, PWC-11 (a niobium-base alloy with a nominal composition of Nb-1%Zr-0.1%C) was creep tested at 1350 K and 40 MPa. Base metal specimens and specimens with transverse electron beam welds were tested with and without a 1000 hr, 1350 K aging treatment prior to testing. In the annealed condition (1 hr at 1755 K + 2 hr at 1475 K), the base metal exhibited superior creep strength compared to the nonaged condition, reaching 1 percent strain in 3480 hr. A 1000 hr, 1350 K aging treatment prior to creep testing had a severe detrimental effect on creep strength of the base metal and transverse electron beam weldments, reducing the time to attain 1 percent strain by an order of magnitude. Extrapolated temperature compensated creep rates indicate that the present heat of PWC-11 may be four times as creep resistant as similarly tested Nb-1%Zr. The extrapolated stress to achieve 1 percent creep strain in 7 yr at 1350 K is 2.7 MPa for annealed Nb-1%Zr and 12 MPa for annealed and aged PWC-11 base metal with and without a transverse electron beam weld.

Titran, R. H.↗
NASA NTRS1985

Mean-flow measurements in a supersonic three-dimensional turbulent boundary layer

Measurements are presented of the mean flow in a supersonic turbulent boundary layer subjected to a constant weak transverse pressure gradient. The temperature and longitudinal velocity and the axial shear stress were only slightly affected by the three-dimensionality but a clearly defined crossflow component appeared, in the manner suggested by theory and confirmed in earlier experiments. The flow deflection angle and transverse-velocity component achieved a self-preserving form so long as the transverse-pressure gradient remained constant, and both achieved a maximum at the sublayer edge; the deflection angle seemed to decrease again between the latter and the surface. An empirical relation was found between the pressure-gradient strength and the maximum in the crossflow, and the dependence of the latter on distance from the surface was used to test analytical crossflow predictions. The data are in general agreement with Van Den Berg's law of the wall. The data also support the so-called parabolic law following a relaxation distance, especially if inviscid gradients are accounted for, and if the normal coordinate is contracted by the compressibility transformation.

Demetriades, A.↗
NASA NTRS1986

Diagnosis of the role of vertical deformation in a two-dimensional primitive equation model of upper-level frontogenesis

In the present equations for the temporal rates of change of the magnitudes of potential temperature and absolute momentum vector gradients that are projected onto vertical planes transverse to straight frontal zones, the terms involving the transverse ageostrophic circulation are of the same mathematical form, and in a kinematic sense are also analogous to, the divergence and deformation terms that involve the horizontal wind field in Pettersen's (1936) classic equation for frontogenesis in the potential temperature field. The proposed frontogenesis equation form for the magnitude of the potential temperature gradient in the transverse plane is illustrated with the results of two simulations from an idealized, two-dimensional primitive equation model in which upper level frontogenesis proceeds by very different mechanisms.

Keyser, D.↗
NASA NTRS1985

Coherent and incoherent lidar - An overview

Characteristics of coherent and incoherent lidars are described. The carrier-to-noise ratio (CNR), SNR relationship, coherence diameter, speckle averaging, multiple pulse averaging, and the possibility of single-frequency pulse generation from the laser transmitter for the two lidar types are compared. Diagrams of the incoherent lidar's direct detection system and the coherent lidar's heterodyne detection system are presented. The transverse coherence diameter is discussed and equations for backscatter from a distributed medium, transverse coherence length, and return path refractive index variations are provided. The importance of transverse coherence length in the coherence lidar system design is considered. The effectiveness of the lidar systems is evaluated in terms of CNR and SNR. The differences in generation of noise-equivalent power are studied and it is observed that the coherent lidar system achieves higher CNR values. The relation between signal fluctuation due to speckle effects and SNR is analyzed; equations for SNR in coherent and incoherent lidar systems are given.

Menzies, R. T.↗
NASA NTRS1986

Parameterized materials and dynamic response characterizations in unidirectional composites

The values of phase velocities of ultrasonic waves in transversely isotropic media are presented in terms of the fiber volume fraction of a unidirectional fiberglass epoxy composite with constant matrix properties and the ratio between extensional moduli in the longitudinal and transverse directions of the composite when the properties of the fibers are changed, at a constant fiber volume fraction. The model of a homogeneous transversely isotropic medium is adopted to describe the relations between elastic properties and velocities. The displacements due to an oscillatory point source in an infinite medium are used as one measure of comparison of the behavior of the unidirectional composite according to the variations of the parameters, as described above. Values of phase velocities, elastic moduli, Poisson's ratios and displacements due to a point source can be read from the parameterized plots for a known fiber volume fraction or a known ratio between extensional moduli of the composite. Alternatively fiber volume fraction and the ratio between extensional moduli can be inferred from the plots when the values of the phase velocities are known; for example from experimental measurements. Therefore, such parameterized curves may be useful in nondestructive mechanical property and material degradation characterizations.

Williams, J. H., Jr.↗