Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Superconductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Enhanced Superconducting Transition Temperature in FeSe0.5Te0.5 Thin Films

We report magnetoresistive and structural measurements of superconducting FeSe0.5Te0.5 epitaxial thin films grown by pulsed laser deposition. Enhanced onset superconducting transition temperature ({approx} 17 K) is observed in some of these films. Structural analysis by x-ray diffraction and high resolution transmission electron microscopy reveal that these films generally have significantly shorter out-of-plane lattice constant c than the bulk value, suggesting that the out-of-plane changes have a dominating impact on the superconducting transition in iron-based superconductors. Our data also indicate that the upper critical field Hc2(0) of those films may reach as high as 50 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Parallel Configuration For Fast Superconducting Strip Line Detectors With Very Large Area In Time Of Flight Mass Spectrometry

We realized a very fast and large Superconducting Strip Line Detector based on a parallel configuration of nanowires. The detector with size 200x200 {mu}m{sup 2} recorded a sub-nanosecond pulse width of 700 ps in FWHM (400 ps rise time and 530 ps relaxation time) for lysozyme monomers/multimers molecules accelerated at 175 keV in a Time of Flight Mass Spectrometer. This record is the best in the class of superconducting detectors and comparable with the fastest NbN superconducting single photon detector of 10x10 {mu}m{sup 2}. We succeeded in acquiring mass spectra as the first step for a scale-up to {approx}mm pixel size for high throughput MS analysis, while keeping a fast response.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Progress on the superconducting undulator for ANKA and on the instrumentation for R and D

Superconducting undulators show a larger magnetic field strength for the same gap and period length, as compared to permanent magnet devices, which allows to generate X-ray beams of higher brilliance and with harder spectrum. The worldwide first short period length superconducting undulator is in operation since 2005 at the synchrotron light source ANKA in Karlsruhe [1]. To further drive the development in this field a research and development program is being carried out. In this contribution we report on the last progress of the construction of a 1.5 m long superconducting undulator with a period length of 15 mm, planned to be installed in ANKA beginning 2010 to be the light source of the new beamline NANO for high resolution X-ray scattering. The key specifications of the system are an undulator parameter K higher than 2 (with a magnetic gap of 5 mm) and a phase error smaller than 3.5 degrees. Cryocoolers will keep the coils at 4.2 K for a beam heat load of 4 W. The ongoing R and D includes improvements in understanding of the magnetic field properties and of the beam heat load mechanisms. The tools and instruments under development to fulfill these tasks are also discussed.

43 PARTICLE ACCELERATORS↗

In situ growth of superconducting NdFeAs(O,F) thin films by molecular beam epitaxy

Superconducting NdFeAs(O,F) thin films were grown on GaAs substrates by molecular beam epitaxy. Films grown with a sufficiently long growth time exhibited a clear superconducting transition with an onset temperature up to 48 K and zero resistance temperature up to 42 K without the need of an ex situ annealing process. Electron probe microanalysis and Hall coefficient measurements indicated that the superconducting films are doped with fluorine, and depth-profile analysis by Auger electron spectroscopy revealed the formation of a NdOF layer near the surface, which is probably connected with the fluorine doping.

36 MATERIALS SCIENCE↗

Effect of Electropolishing and Low-Temperature Baking on the Superconducting Properties of Large-Grain Niobium

Measurements of superconducting properties such as bulk and surface critical fields and thermal conductivity have been carried out in the temperature range from 2 K to 8 K on large-grain samples of different purity and on a high-purity fine-grain sample, for comparison. The samples were treated by electropolishing and low temperature baking (120° C, 48 h). While the residual resistivity ratio changed by a factor of ~3 among the samples, no significant variation was found in their superconducting properties. The onset field for flux penetration at 2 K, Hffp, measured within a ~30 µm depth from the surface, was ~160 mT, close to the bulk value. The baking effect was mainly to increase the field range up to which a coherent superconducting phase persists on the surface, above the upper critical field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Freestanding nanostructures for three-dimensional superconducting nanodevices

Free-space nanostructures are the fundamental building blocks of three-dimensional (3D) nanodevices with multi-functionality beyond that achievable by planar devices. Here we developed a reliable technique for the site-specific post-growth geometrical manipulation of freestanding superconducting nanowires using ion-beam irradiation with nanometer-scale resolution to fabricate uniformly shaped and sized clean-surface 3D nanostructures. Such structures could integrate with conventional superconducting quantum interference devices to detect magnetic fields both parallel and normal to the substrate. Property characterizations suggest that our focused-ion-beam technique allows tailoring of freestanding superconducting loops for size and geometry, potentially for lab-on-chip experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Layer-by-layer shuttered molecular-beam epitaxial growth of superconducting Sr{sub 1-x}La{sub x}CuO{sub 2} thin films

Superconducting Sr{sub 1-x}La{sub x}CuO{sub 2} thin films have been grown on GdScO{sub 3} substrates by reflection high-energy electron diffraction calibrated layer-by-layer molecular-beam epitaxy. X-ray diffraction analysis has confirmed the infinite layer structure after an in situ vacuum annealing step. In situ photoemission spectroscopy indicates that the vacuum annealing step employed immediately after film growth to achieve superconducting films results in oxygen loss from the films. The superconducting critical temperature depends on the La content x, with the highest value obtained for x{approx}0.10. Resistivity as a function of temperature {rho}(T) curves of optimally doped samples show a T{sup 2} temperature dependence characteristic of a scattering process where electron-electron interactions dominate.

36 MATERIALS SCIENCE↗

Resonant coupling applied to superconducting accelerator structures

The concept of resonant coupling and the benefits that accrue from its application is well known in the world of room temperature coupled cavity linacs. Design studies show that it can be applied successfully between sections of conventional elliptical superconducting coupled cavity accelerator structures and internally to structures with spoked cavity resonators. The coupling mechanisms can be designed without creating problems with high field regions or multipactoring. The application of resonant coupling to superconducting accelerators eliminates the need for complex cryogenic mechanical tuners and reduces the time needed to bring a superconducting accelerator into operation.

43 PARTICLE ACCELERATORS↗

Surface-resistance measurements using superconducting stripline resonators

We present a method to measure the absolute surface resistance of conductive samples at a set of GHz frequencies with superconducting lead stripline resonators at temperatures 1–6 K. The stripline structure can easily be applied for bulk samples and allows direct calculation of the surface resistance without the requirement of additional calibration measurements or sample reference points. We further describe a correction method to reduce experimental background on high-Q resonance modes by exploiting TEM-properties of the external cabling. We then show applications of this method to the reference materials gold, tantalum, and tin, which include the anomalous skin effect and conventional superconductivity. Furthermore, we extract the complex optical conductivity for an all-lead stripline resonator to find a coherence peak and the superconducting gap of lead.

36 MATERIALS SCIENCE↗

Design of a horizontal test cryostat for superconducting RF cavities for the FREIA facility at Uppsala University

Uppsala University is constructing a large scale facility, called FREIA (Facility for Research Instrumentation and Accelerator Development). FREIA includes a helium liquefier and an accelerator test facility and has the capacity to test superconducting radio-frequency (RF) cavities with the same RF system and RF power level as in an accelerator. A central element of FREIA is a horizontal test cryostat connected in closed loop to a helium liquefier. This cryostat can house two fully equipped (tuners, piezo, power coupler, helium tank) superconducting cavities to perform full RF high power tests and operate at temperatures between 1.8 K and 4.2 K. The cryostat is designed to accommodate a large array of superconducting cavities and magnets, among which the European Spallation Source (ESS) type spoke and high-β elliptical cavities as well as TESLA/ILC type elliptical cavities. The present status of the project and the design of the cryostat are reported.

43 PARTICLE ACCELERATORS↗

Superconducting tantalum nitride-based normal metal-insulator-superconductor tunnel junctions

We report the development of superconducting tantalum nitride (TaN{sub x}) normal metal-insulator-superconductor (NIS) tunnel junctions. For the insulating barrier, we used both AlO{sub x} and TaO{sub x} (Cu-AlO{sub x}-Al-TaN{sub x} and Cu-TaO{sub x}-TaN{sub x}), with both devices exhibiting temperature dependent current-voltage characteristics which follow the simple one-particle tunneling model. The superconducting gap follows a BCS type temperature dependence, rendering these devices suitable for sensitive thermometry and bolometry from the superconducting transition temperature T{sub C} of the TaN{sub x} film at ∼5 K down to ∼0.5 K. Numerical simulations were also performed to predict how junction parameters should be tuned to achieve electronic cooling at temperatures above 1 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic signature of granular superconductivity in electrodeposited Pb nanowires

Nanocrystalline freestanding Pb nanowires ∼200 nm in diameter were fabricated by electrodeposition into track etched polycarbonate membranes in order to study their superconducting properties. Their superconducting critical temperature, as determined by measuring the Meissner effect, was the same as for bulk Pb, but their critical field was greatly enhanced up to ∼3000 Oe. By assuming the wires consisted of spherical superconducting grains, an estimated grain size r = 60 ± 25 nm was obtained from the magnetization measured as a function of the applied magnetic field at a fixed temperature. An independent estimate for r = 47 ± 12 nm, in good agreement with the previous one, was obtained from the magnetization measured as a function of temperature at a fixed applied magnetic field. Transmission electron microscopy was used to characterize grain size at the wire edges, where a grain size in agreement with the magnetic studies was observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Superconductivity and superfluidity as universal emergent phenomena in diverse physical systems

Superconductivity and superfluidity are observed across a strikingly broad range of physical systems. This universality seems unlikely to be coincidental but a unified understanding of superconductivity and superfluidity across these highly disparate fields seems impossible in traditional microscopic terms. I give an overview of superconductivity and superfluidity found in various fermionic condensed matter, nuclear physics, and neutron star systems, and propose that all result from generic algebraic structures for the emergent effective Hamiltonian, with the role of underlying microscopic physics largely relegated to influence on parameter values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Note: Control of liquid helium supply to cryopanels of Kolkata superconducting cyclotron

The Kolkata superconducting cyclotron utilises liquid helium to cool the main magnet niobium-titanium (NbTi) coil and the cryopanels. Three liquid helium cooled cryopanels, placed inside the dees of the radio-frequency system, maintain the high vacuum in the acceleration region of the superconducting cyclotron. The small cryostat placed inside the cryogenic distribution manifold located at the basement of the superconducting cyclotron building supplies liquid helium in parallel branches to three cold heads, used for cooling their associated cryopanels. The level in the cryostat has to be maintained at an optimum value to ensure uninterrupted flow of liquid helium to these three cold heads. This paper describes the transfer function of the overall system, its tuning parameters, and discusses the actual control of cryostat level by using these parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Site selectivity on chalcogen atoms in superconducting La(O,F)BiSSe

Single crystals of La(O,F)BiSSe were grown by using a CsCl flux method. Single crystal X-ray structural analysis reveals that the crystal structure is isostructural to the BiS{sub 2}- or BiSe{sub 2}-based compounds crystallizing with space group P4/nmm (lattice parameters a = 4.1110(2) Å, c = 13.6010(7) Å). However, the S atoms are selectively occupied at the apical site of the Bi-SSe pyramids in the superconducting layer. The single crystals show a superconducting transition at around 4.2 K in the magnetic susceptibility and resistivity measurements. The superconducting anisotropic parameter is determined to be 34–35 from its upper critical magnetic field. The anisotropy is in the same range with that of other members of the La(O,F)BiCh{sub 2} (Ch = S, Se) family under ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First results of 28 GHz superconducting electron cyclotron resonance ion source for KBSI accelerator

The 28 GHz superconducting electron cyclotron resonance (ECR) ion source has been developed to produce a high current heavy ion for the linear accelerator at KBSI (Korea Basic Science Institute). The objective of this study is to generate fast neutrons with a proton target via a p(Li,n)Be reaction. The design and fabrication of the essential components of the ECR ion source, which include a superconducting magnet with a liquid helium re-condensed cryostat and a 10 kW high-power microwave, were completed. The waveguide components were connected with a plasma chamber including a gas supply system. The plasma chamber was inserted into the warm bore of the superconducting magnet. A high voltage system was also installed for the ion beam extraction. After the installation of the ECR ion source, we reported the results for ECR plasma ignition at ECRIS 2014 in Russia. Following plasma ignition, we successfully extracted multi-charged ions and obtained the first results in terms of ion beam spectra from various species. This was verified by a beam diagnostic system for a low energy beam transport system. In this article, we present the first results and report on the current status of the KBSI accelerator project.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High pressure driven superconducting critical temperature tuning in Sb{sub 2}Se{sub 3} topological insulator

In this letter, we are reporting the change of superconducting critical temperature in Sb{sub 2}Se{sub 3} topological insulator under the influence of an external hydrostatic pressure based on first principles electronic structure calculations coupled with Migdal–Eliashberg model. Experimentally, it was shown previously that Sb{sub 2}Se{sub 3} was undergoing through a transition to a superconducting phase when subjected to a compressive pressure. Our results show that the critical temperature increases up to 6.15 K under the pressure unto 40 GPa and, subsequently, drops down until 70 GPa. Throughout this pressure range, the system is preserving the initial Pnma symmetry without any structural transformation. Our results suggest that the possible relevant mechanism behind the superconductivity in Sb{sub 2}Se{sub 3} is primarily the electron–phonon coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface induced high temperature superconductivity in single unit-cell FeSe on SrTiO{sub 3}(110)

We report high temperature superconductivity in one unit-cell (1-UC) FeSe films grown on SrTiO{sub 3} (STO)(110) substrate by molecular beam epitaxy. By in-situ scanning tunneling microscopy measurement, we observe a superconducting gap as large as 17 meV on the 1-UC FeSe films. Transport measurements on 1-UC FeSe/STO(110) capped with FeTe layers reveal superconductivity with an onset transition temperature (T{sub C}) of 31.6 K and an upper critical magnetic field of 30.2 T. We also find that T{sub C} can be further increased by external electric field although the effect is weaker than that on STO(001) substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗