Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Risk-Based Dynamic Contingency Analysis Applied to Puerto Rico Electric Infrastructure

The U.S. Department of Energy’s (DOE) Office of Electricity and Office of Energy Efficiency & Renewable Energy have funded DOE National Laboratories to perform modeling, analysis, and high-level design of resilience-enhancement options for the power grid of the Commonwealth of Puerto Rico. The Pacific Northwest National Laboratory (PNNL) is one of the national laboratories contributing to the DOE effort. Under this funding, PNNL completed Phase I of their analysis in 2018, which identified high-priority transmission enhancements derived from detailed dynamic cascading analysis of severe contingencies, including a hurricane scenario example. This report describes additional analysis completed under Phase II, which was performed over 2019. The PNNL team applied decades of experience making complex power systems more resilient, reliable, secure, flexible, affordable and sustainable, with partners in government and industry. In this report, PNNL presents the Phase II analysis, in which a risk-based dynamic contingency analysis approach to evaluate impact of several hurricane scenarios was developed. This approach was used to identify high-priority enhancements and test resilience mitigation actions, including the evaluation of high-solar scenarios developed as a result of the 2019 Puerto Rico Integrated Resource Plan (IRP).

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

HydroGEN Seedling: Monolithically Integrated Thin Film/Silicon Tandem Photoelectrodes for High-Efficiency and Stable Photoelectrochemical Water Splitting

In this project, we propose to develop monolithically integrated Si-based tandem photoelectrodes to achieve both high solar-to-hydrogen (STH) efficiency (>15%) and long-term stability (>1,000 hours) in spontaneous water splitting systems. The proposed tandem devices consist of a Ta 3 N 5 , BCTSSe, or In 0.5 Ga 0.5 N top junction, which has a bandgap of ~1.7-2.0 eV and can split the solar spectrum with the Si bottom junction. Ta 3 N 5 , BCTSSe, and InGaN will be grown/deposited on a low-resistivity nanowire tunnel junction on Si substrates using atomic layer deposition (ALD), sputtering, and molecular beam epitaxy (MBE), respectively. Both n and p-type Si solar wafers will be utilized, which can serve as the photoanode or photocathode, respectively. We will use N-rich GaN ultrathin passivation layers to protect photoelectrodes from corrosion and oxidation.

08 HYDROGEN↗
DOE OSTI2024

Decarbonizing the U.S. Economy by 2050: A National Blueprint for the Buildings Sector

Residential and commercial buildings are among the largest sources of carbon dioxide and other greenhouse gas (GHG) emissions in the United States, responsible for more than one-third of total U.S. GHG emissions. There are nearly 130 million existing buildings in the United States, with 40 million new homes and 60 billion square feet of commercial floorspace expected to be constructed between now and 2050. Today, most buildings consume large amounts of energy and cause significant climate pollution to meet our basic needs. Buildings account for 74% of U.S. electricity use and building heating and cooling drives peak electricity demand. Moreover, buildings are where electric vehicles (EVs), solar, storage, heat pumps, water heaters, and other distributed energy resources integrate with the electricity system. Consequently, the buildings sector will play a key role in achieving economywide net-zero emissions by 2050.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Loss of Glen Canyon Dam Hydropower Plant Capabilities

The power grid in the western United States is undergoing a major transformation, driven by technological advancements, power markets, policy shifts, and evolving energy demands. The integration of variable renewable energy (VRE) resources, such as wind and solar, into the power grid has become a major driver of change. Between 2018 and 2023, about 19 gigawatts (GW) of new solar capacity and 14 GW of new wind capacity was built in the Western Interconnection (WI) region. These two VRE resources accounted for the majority of WI capacity additions. The Western Interconnection is expected to host 30 GW of wind, 40 GW of solar, and 14 GW of energy storage by 2030 (Western Electricity Coordinating Council n.d.).

13 HYDRO ENERGY↗
DOE OSTI2026

Final Technical Report: Transport of Complex Mixtures in Ion-Containing Polymer Membranes

Permselective ion-containing membranes are an integral component for many applications from water treatment, fuel cells, and solar fuels devices where the selective transport of molecules and ions is desired. In solar fuels devices, ion-containing polymer membranes are responsible for permitting selective transport of ions between electrodes to maintain overall charge neutrality yet limit transport of reaction products produced at the electrodes. While the transport of single solutes through such membranes has been fairly well described, binary and multicomponent transport is poorly understood due to the myriad of interactions that occur in these systems (i.e. between co-permeants and between permeants and the membrane). Solar fuels devices are just one example of an application where understanding the transport of multiple simultaneous species is critically important to improving device performance as product crossover leads to reductions in overall device performance. The objectives of this research was to improve our understanding of the complex array of factors that influence transport behavior of multiple solutes within ion-containing polymer membranes. This experimental project addressed the lack of fundamental understanding of multicomponent transport behavior by synthesizing ion exchange membranes with varied incorporation of comonomers (ionic and neutral moieties) to investigate fundamental relationships between membrane structure, membrane physiochemical properties, and transport behavior of solutes and complex solute mixtures through dense, hydrated membranes.

25 ENERGY STORAGE↗
NASA NTRS1970

High-voltage solar array for ion engines

High voltage solar arrays for ion engines, discussing spacecraft propulsion, electric generation, insulation integrity, cell degradation and current leakage

Oman, H.↗
NASA NTRS1973

Temperature compensated sleeve type mirror mount

The primary mirror of a large (26-inch diameter aperture) solar telescope was made of glass ceramic and designed with an integral hub on the back of the center of the mirror. This permits heat from the mirror to radiate off its back to a nearby cold plate. To permit mounting without high stresses, the hub was ground down to a smooth cylindrical surface 3.5 inch in diameter. The ground surface was then acid-etched to remove 0.007 inch (on the diameter) by immersion for five minutes in a mixture of four parts 92% sulfuric acid and three parts 50% hydrofluoric acid. The acid etching removes microcracks from the ground Cer-Vit surface. An Invar sleeve was fabricated to fit over the hub with about 0.010 inch radial (0.020 inch diametral) clearance.

Source record↗
NASA NTRS1980

OH and NH emission studies of comet Kohoutek

A 30 inch flat mirror was used with the solar telescope of the Kitt Peak National Observatory to obtain the integrated disc spectrum of the Sun between the wavelengths of 3000A and 4000A at a resolution of about two hundred thousand. The data obtained were used to calculate the intensities of the fluorescent lines of the OH radical in comets. The results were compared with those obtained using the center of the disc spectrum only. The wavelength of the reference point and the dispersion from which the wavelength of other points can be obtained are presented in tabular form.

Kumar, C. K.↗
NASA NTRS1979

SEPS mission and system integration/interface requirements for the space transportation system

Earth escape mission requirements on Solar Electric Propulsion System (SEPS), and the interface definition and planned integration between SEPS, user spacecraft, and other elements of the STS. Emphasis is placed on the Comet rendezvous mission, scheduled to be the first SEPS user. Interactive SEPS interface characteristics with spacecraft and mission, as well as the multiple organizations and inter-related development schedules required to integrate the SEPS with spacecraft and STS, require early attention to definition of interfaces in order to assure a successful path to the first SEPS launch in July 1985

Cork, M. J.↗
NASA NTRS1980

Nickel contacts for low cost solar cells

It is noted that nickel metallization of silicon solar cells offers a relatively inexpensive method of making electrical contact with the surface of the cell. More expensive methods, involving precious metals and costly processes, are widely used; these have been developed for space applications, where considerations of reliability predominate over those of cost. Since recent interest in terrestrial applications of solar cells has led to an increased concern over cost, nickel has assumed a position as a major candidate for solar cell metallization. It is shown that sintering can improve the integrity of the nickel-silicon bond. Evidence that the nickel-silicon contact can survive moderate environmental stress is presented.

Anderson, J. R.↗
NASA NTRS1984

Thin-film reliability and engineering overview

The reliability and engineering technology base required for thin film solar energy conversions modules is discussed. The emphasis is on the integration of amorphous silicon cells into power modules. The effort is being coordinated with SERI's thin film cell research activities as part of DOE's Amorphous Silicon Program. Program concentration is on temperature humidity reliability research, glass breaking strength research, point defect system analysis, hot spot heating assessment, and electrical measurements technology.

Ross, R. G., Jr.↗
NASA NTRS1984

Absolute intensities of spectral lines in carbon dioxide bands near 2050/cm

The absolute intensities of individual lines of eleven relatively weak bands of (C-12)(O-16)2, (C-13)(O-16)2, (O-16)(C-12)(O-18), and (O-16)(C-12)(O-17) near 2050/cm were measured and recorded at room temperature and 0.01/cm resolution with the Fourier transform spectrometer located in the McMath solar telescope complex located at the National Solar Observatory on Kitt Peak. Each spectrum was obtained with an integration time of one hour, the temperature and pressure were monitored during this time, and the signal-to-rms noise in the 5 micron region was approximately 4000 for all scans. The intensities were determined from analysis of 1-2/cm segments of spectra using nonlinear least-squares spectral curve fitting, and analyzed to determine the vibrational band intensity and F-factor coefficients for each of the bands. The results are pertinent to a wide variety of problems in atmospheric physics and for the analysis of remote-sensing data.

Rinsland, C. P.↗
NASA NTRS1985

Inference of high-latitude ionization and conductivity from AE-C measurements of auroral electron fluxes

Electron fluxes in the kilovolt energy range measured by the AE-C satellite have been used to infer the latitudinal distribution of ionization at high latitudes in the altitude range 90 to 200 km. These distributions are compared with simultaneous measurements of electron density by the Chatanika incoherent scatter radar. The study was based on more than 120 electron density profiles obtained on three different nights at magnetic local times between 0200 and 0400. The calculated distributions agree very well with the altitude and latitude distributions measured by the radar. The only obvious difference was the presence in the radar data of additional ionization produced by solar illumination. A comparison was also conducted of the height-integrated electrical conductivities computed from the measured profiles and those inferred from the satellite measurements. For Hall and Pedersen conductances greater than 5 mhos, the agreement is within 25 percent. The data were also used to deduce the altitude profile of the effective recombination coefficient. This profile agrees well with the results of previous studies.

Vondrak, R.↗
NASA NTRS1985

Current status of advanced solar array technology development

This paper describes the current status of the JPL high performance solar array development program. Recent progress in solar cell, blanket and structure technologies is described. Future plans for integrating this work are discussed. The impact of the Mariner Mark II mission set on the future direction taken by this development program is assessed.

Scott-Monck, J.↗
NASA NTRS1993

Lightweight solar concentrator structures, phase 2

This report summarizes the results of the program conducted by Ultramet under SBIR Phase 2 Contract NAS3-25418. The objective of this program was to develop lightweight materials and processes for advanced high accuracy Space Solar Concentrators using rigidized foam for the substrate structure with an integral optical surface.

Williams, Brian E.↗
NASA NTRS1989

Direct IR Interferometric Detection of Extra Solar Planets

This paper describes a concept for the direct detection of extra solar planets. The concept is based on a decade old idea from Bracewell but expanded. A long baseline interferometer is examined with two three meter telescopes, cooled to 70K and a baseline of 30-50 meters. In space, this instrument would be able to detect an Earth sized planet around a solar like star at 10 parsec in approximately 1 hour of integration (5 sigma). The total number of candidate stars with detectable "Earths" number in the thousands.

Shao, Michael↗