SEARCH · Engineering Papers

Results for “SHOCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Shock metamorphism and petrography of the Shergotty achondrite

The shock history of the Shergotty meteorite has been evaluated by analyzing the observable shock effects. In addition, the results of petrographic and mineralogical analyses of new Shergotty subsamples are presented. The overall modal composition of these subsamples is similar to that of the other Shergotty samples, except for the rather high whitlockite content. The shock effects observed in the mineral constituents include mosaicism, deformation bands, planar fractures, and mechanical twin lamellae in clinopyroxene; isotropization of plagioclase with very rare remnants of birefringence; and planar deformation structures, mosaicism, and strongly reduced birefringence in quartz. Other shock effects include mechanical twinning of ilmenite, and localized in situ melting of neighboring minerals at the contact of low and high density phases. The observed shock effects could be explained by a single shock event.

Stoeffler, D.↗

NASA NTRS1987

Shock structure measured in a transonic fan using laser anemometry

Shock structure measurements acquired in a low aspect ratio transonic fan rotor are presented and analyzed. The rotor aspect ratio is 1.56 and the design tip relative Mach number is 1.38. The rotor flowfield was surveyed at near maximum efficiency and near stall operating conditions. Intra-blade velocity measurements acquired with a laser fringe anemometer on blade-to-blade planes in the supersonic region from 10 to 60 percent span are presented. The three-dimensional shock surface determined from the velocity measurments is used to determine the shock surface normal Mach number in order to properly calculate the ideal shock jump conditions. The ideal jump conditions are calculated based upon the Mach numbers measured on a surface of revolution and based upon the normal Mach number to indicate the importance of accounting for shock three dimensionality in turbomachinery design. Comparison of the shock locations with those predicted by a 3-D Euler code showed very good agreement and indicated the usefulness of integrating computational and experimental work to enhance the understanding of the flow physics occurring in transonic turbomachinery passages.

Wood, Jerry R.↗

NASA NTRS1987

Optical Radiation from Shock-Compressed Materials

Recent observations of shock-induced radiation from oxides, silicates, and metals of geophysical interest constrain the shock-compressed temperature of these materials. The relationships between the temperature inferred from the observed radiation and the temperature of the shock-compressed film or foil and/or window were investigated. Changes of the temperature field in each target component away from that of their respective shock-compressed states occur because of: shock-impedance mismatch between target components; thermal mismatch between target components; surface roughness at target interfaces; and conduction within and between target components. In particular, conduction may affect the temperature of the film/foil window interface on the time scale of the experiments, and so control the intensity and history of the dominant thermal radiation sources in the target. This type of model was used to interpret the radiation emitted by a variety of shock-compressed materials and interfaces.

Svendsen, Robert F., Jr.↗

NASA NTRS1986

On broadband shock associated noise of supersonic jets

The characteristics and generation mechanisms of noise associated with the interactions of turbulence with the quasi-periodic broadband shock cells of supersonic jet engines are reviewed. The noise possesses broadband spectra and directionality that are completely different from noise caused by turbulence. Experimental data have shown that broadband noise is most prominent in the forward arc, with peak frequencies being a function of the observation angle and the pressure mismatch in the engine. The noise originates in the engine as turbulence-shock interactions occur during downstream movement. Features of the phased point-source array model and the large turbulence structures-shock cells interaction model are defined and model predictions are compared with experimental data on noise sources. Only a scaling of the noise component is found to be currently possible. More complete characterization depends on consideration of the jet temperature and analysis of turbulence-shock interactions, broadband shock and screech tones and shock noise in several flow configurations.

Tam, C. K. W.↗

NASA NTRS1987

Numerical simulation by TVD schemes of complex shock reflections from airfoils at high angle of attack

The shock-capturing capability of total variation diminishing (TVD) schemes is demonstrated for a more realistic complex shock-diffraction problem for which the experimental data are available. Second-order explicit upwind and symmetric TVD schemes are used to solve the time-dependent Euler equations of gas dynamics for the interaction of a blast wave with an airfoil at high angle-of-attack. The test cases considered are a time-dependent moving curved-shock wave and a contant moving planar-shock wave impinging at an angle-of-attack 30 deg on a NACA 0018 airfoil. Good agreement is obtained between isopycnic contours computed by the TVD schemes and those from experimental interferograms. No drastic difference in flow-field structure is found between the curved- and planar-shock wave cases, except for a difference in density level near the lower surface of the airfoil. Computation for cases with higher shock Mach numbers is also possible. Numerical experiments show that the symmetric TVD scheme is less sensitive to the boundary conditions treatment than the upwind scheme.

Moon, Young J.↗

NASA NTRS1985

A quarter century of collisionless shock research

This review highlights conceptual issues that have both governed and reflected the direction of collisionless shock research in the past quarter century. These include MHD waves and their steepening, the MHD Rankine-Hugoniot relations, the super-critical shock transition, nonlinear oscillatory wave trains, ion sound anomalous resistivity and the resistive-dispersive transition for subcritical shocks, ion reflection and the structure of supercritical quasi-perpendicular shocks, the earth's foreshock, quasi-parallel shocks, and finally, shock acceleration processes.

Kennel, C. F.↗

NASA NTRS1985

Planetary bow shocks

Planetary bow shocks provide insight into both the behavior of collisionless shocks and the nature of the planetary obstacle responsible for creating those bow shocks. This review paper first presents a survey of the microstructure of planetary bow shocks using data obtained at Mercury, Venus, the earth, Mars, Jupiter, and Saturn. When it examines the correspondence of the behavior of the shock jumps with that predicted by theory, and the differences between gas dynamic and magnetohydrodynamic solutions. Finally, it examines the information available from observations of the location of the bow shock about the nature of the solar wind-planetary interaction.

Russell, C. T.↗

NASA NTRS1985

Subcritical collisionless shock waves

The development history of theoretical accounts of low Mach number collisionless shock waves is related to recent observational advancements, with attention to weaker shocks in which shock steepening is limited by dispersion and/or anomalous resistivity and whose character is primarily determined by the dispersive properties of the ambient plasma. Attention has focused on nearly perpendicular shocks where dispersive scale lengths become small and the associated cross-field currents become strong enough to generate significant plasma wave turbulence. A number of oblique, low Mach number bow shocks have been studied on the basis of data from the ISEE dual spacecraft pair, allowing an accurate determination of shock scale lengths.

Mellott, M. M.↗

NASA NTRS1987

Electron heating by ion acoustic turbulence in simulated low Mach number shocks

Explicit and fully electromagnetic particle-in-cell simulations of perpendicular, collisionless, and nominally subcritical shocks are performed in one and two spatial dimensions using the code wave. Shock parameters are chosen to maximixe the growth rates of the current-driven ion acoustic instability in the shock. Electron heating by ion acoustic turbulence is observed at the shocks, at rates in agreement with second-order Vlasov theory predictions. However, the amount of resistive electron heating is small and ion reflection provides the major source of dissipation. Strictly resistive shocks do not exist for the parameters suitable for explicit particle codes running on today's supercomputers, because the plasma convects through these shocks so quickly that current-driven instabilities have little time to be amplified and to heat the electrons resistively. This effect is primarily a result of the relatively small values of omega(pe)/omega(ce) that can be analyzed.

Tokar, Robert L.↗

NASA NTRS1988

Shock analysis - Three useful new relations

The behavior of collisionless hydromagnetic shocks in interplanetary space is considered analytically, with a focus on relations, implicit in the governing Rankine-Hugoniot equations, involving the magnetic field (B) and the plasma velocity (V). A moving reference frame aligned with the shock is employed, and expressions are derived which make it possible (1) to determine the speed of a shock of arbitrary orientation from upstream and downstream measurements of B and V; (2) to characterize the change in flow direction as the plasma crosses the shock in terms of the plasma beta, the Mach number, and the angle between the upstream field and the shock normal; and (3) to infer the third component of the upstream-downstream velocity jump from B and two-dimensional V measurements. These expressions are applied to ISEE-3 data on an interplanetary shock on April 5, 1979, and the results are presented in tables.

Smith, Edward J.↗

NASA NTRS1988

Theory and simulation of collisionless parallel shocks

This paper presents a self-consistent theoretical model for collisionless parallel shock structure, based on the hypothesis that shock dissipation and heating can be provided by electromagnetic ion beam-driven instabilities. It is shown that shock formation and plasma heating can result from parallel propagating electromagnetic ion beam-driven instabilities for a wide range of Mach numbers and upstream plasma conditions. The theoretical predictions are compared with recently published observations of quasi-parallel interplanetary shocks. It was found that low Mach number interplanetary shock observations were consistent with the explanation that group-standing waves are providing the dissipation; two high Mach number observations confirmed the theoretically predicted rapid thermalization across the shock.

Quest, K. B.↗

NASA NTRS1988

Plasma waves in the range of the lower hybrid frequency - ISEE 1 and 2 observations at the earth's bow shock

This report presents a characterization of plasma wave noise in the range of the lower hybrid frequency associated with 65 crossings of earth's bow shock observed by the ISEE 1 and 2 satellites. Wave growth generally becomes detectable at the upstream edge of the shock foot, increases at the upstream edge of the shock ramp, peaks within the ramp, and then quickly decays to steady downstream values. The upstream extent of the noise is on the same order as that of specularly reflected gyrating ions. Similar profiles were observed in subcritical and supercritical shocks, and no special behavior was associated with the first critical Mach number. Spectra in the foot and ramp were similar in shape, although the noise was 1 to 2 orders of magnitude more intense in the shock ramps than in the feet. Electric field intensities are positively correlated with solar wind speed and inversely related to electron beta and Mach number. Magnetic components are positively correlated with Mach number and beta. The results are generally consistent with suggestions that the noise consists of lower hybrid waves driven by reflected gyrating ions in the foot, and by additional instabilities, such as the cross-field current, in the shock ramp.

Mellott, M. M.↗

NASA NTRS1988

Effects of variables upon pyrotechnically induced shock response spectra, part 2

Throughout the aerospace industry, large variations of 50 percent (6 dB) or more in shock response spectra (SRS) derived from pyrotechnic separation events continue to be reported from actual spaceflight data and from laboratory tests. As a result of these variations, NASA funded a research program for 1984 through 1986. The purpose of the 1984 through 1986 project was to analyze variations in pyrotechnically induced SRS and to determine if and to what degree manufacturing and assembly variables and tolerances, distance from the shock source, data acquisition instrumentation, and shock energy propagation affect the SRS. Sixty-four free-free boundary plate tests were performed. NASA funded an additional study for 1987 through 1988. This paper is a summary of the additional study. The purpose was to evaluate shock dissipation through various spacecraft structural joint types, to evaluate shock variation for various manufacturing and assembly variables on clamped boundary test plates, and to verify data correction techniques. Five clamped boundary plate tests investigated manufacturing and assembly variables and mass loading effects. Six free-free boundary plate tests investigated shock dissipation across spacecraft joint structures.

Smith, James Lee↗

NASA NTRS1989

Experimental study of pressure and heating rate on a swept cylindrical leading edge resulting from swept shock wave interference

The effects of cylindrical leading edge sweep on surface pressure and heat transfer rate for swept shock wave interference were investigated. Experimental tests were conducted in the Calspan 48-inch Hypersonic Shock Tunnel at a nominal Mach number of 8, nominal unit Reynolds number of 1.5 x 10 to the 6th power per foot, leading edge and incident shock generator sweep angles of 0, 15, and 30 deg, and incident shock generator angle-of-attack fixed at 12.5 deg. Detailed surface pressure and heat transfer rate on the cylindircal leading edge of a swept shock wave interference model were measured at the region of the maximum surface pressure and heat transfer rate. Results show that pressure and heat transfer rate on the cylindrical leading edge of the shock wave interference model were reduced as the sweep was increased over the range of tested parameters. Peak surface pressure and heat transfer rate on the cylinder were about 10 and 30 times the undisturbed flow stagnation point value, respectively, for the 0 deg sweep test. A comparison of the 15 and 30 deg swept results with the 0 deg swept results showed that peak pressure was reduced about 13 percent and 44 percent, respectively, and peak heat transfer rate was reduced about 7 percent and 27 percent, respectively.

Glass, Christopher E.↗

NASA NTRS1988

Electron heating and the potential jump across fast mode shocks

Two different methods were applied to determine the cross-shock potential jump in the de Hoffmann-Teller reference frame, using a data set that represented 66 crossings of the terrestrial bow shock and 14 interplanetary shocks observed by various ISEE spacecraft, and one crossing each of the Jovian bow shock and the Uranian bow shock made by the Voyager spacecraft. Results for estimates of the electrostatic potential based on an estimate of the jump in electron enthalpy correlated well with estimates based on Liouville's theorem, although the Liouville-determined values were systematically the higher of the two, suggesting that significant irreversible processes contribute to the shape of the downstream distribution. The potential jump corresponds to approximately 12-15 percent of the incident ion ram kinetic energy, and was found not to be controlled by the Mach number, plasma beta, shock geometry, or electron to ion temperature ratios.

Schwartz, Steven J.↗

NASA NTRS1989

Two-temperature radiative shocks with electron thermal conduction

The influence of electron thermal conduction on radiative shock structure is studied for both one- and two-temperature plasmas. The dimensionless ratio of the conductive length to the cooling length determines whether or not conduction is important, and shock jump conditions with conduction are established for a collisionless shock front. Approximate solutions are obtained, with the assumptions that the ionization state of the gas is constant and the cooling rate is a function of temperature alone. In the absence of magnetic fields, these solutions indicate that conduction noticeably influences normal-abundance interstellar shocks with velocities 50-100 km/s and dramatically affects metal-dominated shocks over a wide range of shock velocities.

Borkowski, Kazimierz J.↗

NASA NTRS1988

Multi-spacecraft observations of collisionless shocks

The ability to make simultaneous, multipoint measurements of field and plasma properties has substantially increased knowledge of the structure and physics of collisionless shocks in space. In addition to allowing the determination of the large-scale macroscopic structure of such shocks as well as reliable estimates of shock normal direction, multipoint measurements have made it possible to measure shock thicknesses and speeds under a variety of upstream conditions. This ability has enabled a number of quantitative analyses of shock structure, including the confirmation of the dispersive whistler-mode character at low Mach numbers, the assessment of the relative importance of magnetic and electrostatic forces within the shock, and a detailed examination of possible dissipation mechanisms.

Thomsen, M. F.↗

NASA NTRS1989

Separation shock motion in fin, cylinder, and compression ramp - Induced turbulent interactions

In conjunction with new experimental results at Mach 5, an examination has been made of published data on unsteadiness of shock-induced turbulent boundary-layer separation. The data are all wall pressure fluctuation measurements made under the unsteady separation shock and are from interactions induced by compression ramps, blunt and sharp fins, and circular cylinders. There is little evidence of a link between the separation shock zero-crossing frequency and characteristic frequency of the incoming boundary layer. The low shock frequencies and low shock speeds, and the trends with changes in model geometric parameters and incoming boundary layer, suggest that turbulent or global fluctuations at the upstream boundary of the separated flow drive the shock motion.

Dolling, D. S.↗