Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Thomson scattering density calibration by Rayleigh and rotational Raman scattering on NSTX

The multipoint Thomson scattering diagnostic measures the profiles of the electron temperature T{sub e}(R) and density n{sub e}(R) on the horizontal midplane of NSTX. Normal operation makes use of Rayleigh scattering in nitrogen or argon to derive the density profile. While the Rayleigh scattering n{sub e}(R) calibration has been validated by comparison to other density measurements and through its correlation with plasma phenomena, it does require dedicated detectors at the laser wavelength in this filter polychromator based diagnostic. The presence of dust and/or stray laser light precludes routine use of these dedicated spectral channels for Thomson scattering measurement. Hence it is of interest to investigate the use of Raman scattering in nitrogen for the purpose of density calibration since it could free up detection equipment, which could then be used for the instrumentation of additional radial channels. In this paper the viewing optics 'geometrical factor' profiles obtained from Rayleigh and Raman scattering are compared. While both techniques agree nominally, residual effects on the order of 10% remain and will be discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of p-doping on the thermal sensitivity of individual Si nanowires

A gradual downshift and broadening of the Si optical phonon peak was observed by Raman scattering measurements on individual undoped and p-doped silicon nanowire (SiNW) when heated by a laser beam. This dual effect can be interpreted by an induced compressive stress resulting from structural defects. The p-doped SiNW was shown to be the most sensitive to heating and its structure was clearly modified with a large diffusion of gold atoms forming numerous gold nanoparticles.

36 MATERIALS SCIENCE↗

Selective epitaxial growth of graphene on SiC

We present a method of selective epitaxial growth of few layers graphene (FLG) on a ''prepatterned'' silicon carbide (SiC) substrate. The methods involves, successively, the sputtering of a thin aluminium nitride (AlN) layer on top of a monocrystalline SiC substrate and, then, patterning it with e-beam lithography and wet etching. The sublimation of few atomic layers of Si from the SiC substrate occurs only through the selectively etched AlN layer. The presence of the Raman G-band at {approx}1582 cm{sup -1} in the AlN-free areas is used to validate the concept. It gives absolute evidence of selective FLG growth.

36 MATERIALS SCIENCE↗

Kinetics Of Isomerisation Reaction Of Oriented Polyacetylene Induced By Laser

The impact of a laser's photons ({lambda} = 514.5 nm) on the surface of polyacetylene films (PA), composed of macromolecules PAcis and PAtrans produces simultaneously thermal and Raman diffusion [1]. The thermal effect initializes the isomerization of macromolecules PAcis to PAtrans [2]; this reaction is exothermic. Samples are polyacetylene oriented films synthesized horizontally or vertically in cis configuration and are subject to different laser powers during intervals of time which vary between 20 s and 250 s. The power (P ({lambda}), mW) of the laser is equivalent to the temperature T, of isomerization [3]. Isotherms are constructed and are characterized by the laser power applied. We have established theoretical models calculations with the aim of determining the kinetic parameters of the reaction of isomerization: the activation energy (Ea), the frequency factor of Arrhenius (A), and the rate constant (k). We concluded that even in the field of seconds, the isomerization is a complex process different from a reaction of order: 1, 7/10, 2/3, 3/5, 1/2, 2/5 and 1/4. The order 2/3 being the most suitable. The study determined, among others, the rate constants k 2/3 (T)(of the order 2/3 of the isomerization reaction)= 0.003337244, 0.0052149, 0.0209636, 0.043727 s-1 respectively for Laser powers 30, 120, 200 and 300 mW; activation energy 17.7844 kcal/mol and a factor of collision 19.066816 10{sup 6} s{sup -1}. These results are found to be close to the experimental results studied.

36 MATERIALS SCIENCE↗

Raman and dielectric study of Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-MgAl{sub 2}O{sub 4} tunable microwave composite

(1-x)Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-xMgAl{sub 2}O{sub 4} (x=0.00, 0.05, 0.10, 0.20, and 0.30) composite ceramics have been synthesized by the solid-state reaction, and its structural and dielectric properties have been systematically characterized. Two crystalline phases, a cubic perovskite structure Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3} (BST) and a face-centered-cubic spinel structure MgAl{sub 2}O{sub 4} (MA), are clearly visible for x{>=}0.05. As the MA content increases, the composite ceramics show an increased degree of deviation from the Curie-Weiss law and an increased diffuseness of the dielectric peak. Meanwhile, the tunability of composite ceramics increases. Raman analysis clearly indicates that the incorporation of MA lowers the permittivity and degrades the quality factor of BST composites, which is ascribed to the deterioration on B-site ordering of ABO{sub 3} perovskite structure.

36 MATERIALS SCIENCE↗

Nanoparticle fabrication of hydroxyapatite by laser ablation in water

Synthetic polycrystalline hydroxyapatite was ablated in water with 337 nm radiation from a UV nitrogen pulsed laser. According to transmission electron microscopy micrographs, the ablated particles were approximately spherical and had a size of {approx}80 nm. Raman spectroscopic analysis demonstrated that particles had the same structure as the original crystal. X-ray photoelectron spectroscopy showed that the surface chemical composition was close to that of the original material. The characteristics of the ablated particles and estimations of the temperature rise of the hydroxyapatite surface under laser irradiation are consistent with the mechanism of explosive boiling being responsible for ablation. The experimental observations offer the basis for preparation of hydroxyapatite nanoparticles by laser ablation in water.

36 MATERIALS SCIENCE↗

Demonstration of detuning and wavebreaking effects on Raman amplification efficiency in plasma

A plasma-based resonant backward Raman amplifier/compressor for high power amplification of short laser pulses might, under ideal conditions, convert as much as 90% of the pump energy to the seed pulse. While the theoretical highest possible efficiency of this scheme has not yet been achieved, larger efficiencies than ever before obtained experimentally (6.4%) are now being reported, and these efficiencies are accompanied by strong pulse compression. Based on these recent extensive experiments, it is now possible to deduce that the experimentally realized efficiency of the amplifier is likely constrained by two factors, namely the pump chirp and the plasma wavebreaking, and that these experimental observations may likely involve favorable compensation between the chirp of the laser and the density variation of the mediating plasma. Several methods for further improvement of the amplifier efficiency in current experiments are suggested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Raman-active Froehlich optical phonon mode in arsenic implanted ZnO

In this letter, using both off-resonant and resonant Raman spectroscopic techniques, the correlation of optical phonons and structural disorder in As{sup +} implanted ZnO single crystals has been investigated. An additional broad peak shoulder at 550 cm{sup -1} between the transverse optical and longitudinal optical (LO) phonons was clarified to be resonant Froehlich optical phonon mode in the framework of effective dielectric function. Under resonance condition, an asymmetric broadening and softening of the LO phonon along with a blueshifted luminescent peak revealed the decreasing phonon coherent length and nanocrystallization with increasing fluence, respectively, in good agreement with the observations of transmission electron microscopy and atomic force microscopy.

36 MATERIALS SCIENCE↗

Influence of La doping on structural and dielectric properties of SrBi{sub 2}Nb{sub 2}O{sub 9} ceramics

Lanthanum doped SrBi{sub 2}Nb{sub 2}O{sub 9} ceramics with the chemical formula SrBi{sub 2-x}La{sub x}Nb{sub 2}O{sub 9} (SBLN) (x=0-0.5) have been prepared through conventional solid state route. X-ray diffraction reveals the shrinkage of unit cell of strontium bismuth niobate with incorporation of La{sup 3+} dopant, having no lone pair electrons. Shifting of Raman phonon modes indicates the reduced rattling space of NbO{sub 6} octahedra with increase in La doping concentration. Further, the softening of lowest frequency phonon mode with increasing x in SBLN shows the transition from ferroelectric to paraelectric at room temperature. The dielectric properties for all the compositions are studied as a function of temperature (25 to 500 deg. C) over the frequency range of 10 kHz-1 MHz. With increase in lanthanum doping concentration the phase transition becomes diffused and transition temperature gets shifted toward lower temperature. A phase transition from normal ferroelectric to paraelectric has been observed via relaxor-type ferroelectrics with increase in x. The frequency dependence of transition temperature was studied in terms of Vogel-Fulcher relation for SBLN (x=0.4)

36 MATERIALS SCIENCE↗

Raman Amplification in Plasma: Thermal Effects

The impact of thermal effects on Raman amplification in plasma is investigated theoretically. It is shown that damping and the shift in plasma resonance at finite temperature can alter the evolution of the amplified pulse and lead to pulse compression which is not predicted by the cold plasma model. Although thermal effects can lead to a reduction in the efficiency of the interaction, this can be ameliorated by using a chirped pump. In this case thermal effects can be beneficial and suppress the development of the train of pulses that develops behind the amplified pulse, as observed in the cold plasma model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasma restructuring of catalysts for chemical vapor deposition of carbon nanotubes

The growth of multiwalled carbon nanotubes and carbon nanofibers by catalytic chemical vapor deposition at lower temperatures is found to be aided by a separate catalyst pretreatment step in which the catalyst thin film is restructured into a series of nanoparticles with a more active surface. The restructuring is particularly effective when carried out by an ammonia plasma. The nature of the restructuring is studied by atomic force microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy, and Raman. We find that as the growth temperature decreases, there is a limiting maximum catalyst thickness, which gives any nanotube growth. Plasmas are found to restructure the catalyst by a combination of physical etching and chemical modification. Large plasma powers can lead to complete etching of thin catalyst films, and hence loss of activity. Ni is found to be the better catalyst at low temperatures because it easily reduced from any oxide form to the catalytically active metallic state. On the other hand, Fe gives the largest nanotube length and density yield at moderate temperatures because it is less easy to reduce at low temperatures and it is more easily poisoned at high temperatures.

36 MATERIALS SCIENCE↗

A novel method for preparing stoichiometric SnO{sub 2} thin films at low temperature

Tin oxide is a well known nonstoichiometric material with dual valency. The invariance of stoichiometry is very intriguing. As of today no report is available for preparing perfect stoichiometric tin oxide. Here we report a novel method to prepare stoichiometric tin oxide by modifying the known plasma enhanced chemical vapor deposition technique using SnCl{sub 4}-xH{sub 2}O as precursor and O{sub 2} as reactant gas at various temperatures from 300 to 800 deg. C. Tetragonal rutile structure of SnO{sub 2} was found, grown along the [110] direction. X-ray photoelectron spectroscopic measurement showed constant Sn/O ratio. Sn 3d and O 1s were found composed of only Sn{sup 4+} (487.2 eV) and O-Sn{sup 4+} (531.2 eV) with equal peak widths. Raman band intensity ({approx}633 cm{sup -1}) was found increasing with temperature, indicating the morphological changes. Sheet resistance of {approx}0.5 k{Omega}/{open_square} at 300 deg. C was measured that reduces to {approx}0.1 k{Omega}/{open_square} at 600 deg. C. It is found that film stoichiometry remains unaltered, while the structural morphology changes significantly.

36 MATERIALS SCIENCE↗

Radiation damage to amorphous carbon thin films irradiated by multiple 46.9 nm laser shots below the single-shot damage threshold

High-surface-quality amorphous carbon (a-C) optical coatings with a thickness of 45 nm, deposited by magnetron sputtering on a silicon substrate, were irradiated by the focused beam of capillary-discharge Ne-like Ar extreme ultraviolet laser (CDL=capillary-discharge laser; XUV=extreme ultraviolet, i.e., wavelengths below 100 nm). The laser wavelength and pulse duration were 46.9 nm and 1.7 ns, respectively. The laser beam was focused onto the sample surface by a spherical Sc/Si multilayer mirror with a total reflectivity of about 30%. The laser pulse energy was varied from 0.4 to 40 muJ on the sample surface. The irradiation was carried out at five fluence levels between 0.1 and 10 J/cm{sup 2}, accumulating five different series of shots, i.e., 1, 5, 10, 20, and 40. The damage to the a-C thin layer was investigated by atomic force microscopy (AFM) and Nomarski differential interference contrast (DIC) optical microscopy. The dependence of the single-shot-damaged area on pulse energy makes it possible to determine a beam spot diameter in the focus. Its value was found to be equal to 23.3+-3.0 mum using AFM data, assuming the beam to have a Gaussian profile. Such a plot can also be used for a determination of single-shot damage threshold in a-C. A single-shot threshold value of 1.1 J/cm{sup 2} was found. Investigating the consequences of the multiple-shot exposure, it has been found that an accumulation of 10, 20, and 40 shots at a fluence of 0.5 J/cm{sup 2}, i.e., below the single-shot damage threshold, causes irreversible changes of thin a-C layers, which can be registered by both the AFM and the DIC microscopy. In the center of the damaged area, AFM shows a-C removal to a maximum depth of 0.3, 1.2, and 1.5 nm for 10-, 20- and 40-shot exposure, respectively. Raman microprobe analysis does not indicate any change in the structure of the remaining a-C material. The erosive behavior reported here contrasts with the material expansion observed earlier [L. Juha et al., Proc. SPIE 5917, 91 (2005)] on an a-C sample irradiated by a large number of femtosecond pulses of XUV high-order harmonics.

36 MATERIALS SCIENCE↗

Resonant Raman scattering contribution to attenuation of x rays at energies in lower vicinity of the K-shell ionization threshold of some elements

Attenuation of the x rays and gamma rays in the {sub 22}Ti, {sub 41}Nb, {sub 69}Tm, {sub 70}Yb, and {sub 71}Lu elements have been measured with special emphasis for the x ray energies (E{sub in}) in lower vicinity of the K shell ionization threshold (B{sub K}) of the element. The incident photon beam is obtained from decay of the {sup 55}Fe, {sup 241}Am, and {sup 57}Co radioisotopes, and fluorescence of the {sub 23}V, {sub 70}Yb, {sub 71}Lu, {sub 74}W, {sub 76}Os, and {sub 90}Th targets excited by the x rays and gamma rays from the radioisotopes. The measurements were performed using energy dispersive setups involving Ge detectors. The measured attenuation coefficients agree with the available theoretical values except at the photon energies with (B{sub K}-E{sub in}) less than or nearly equal to the K-shell width (GAMMA{sub K}), where significant positive deviations as large as factor of 2 have been observed. In view of reliability of the available theoretical cross sections for the photoionization and the photon scattering processes, the magnitude of positive alteration at the photon energy in lower vicinity of the ionization threshold is attributed to the K shell resonant Raman scattering (RRS) process and the corresponding cross sections have been deduced. Possible matrix effects in the energy dispersive x ray spectrometry due to RRS are also discussed.

36 MATERIALS SCIENCE↗

Control of 2{omega} (527 nm) stimulated Raman scattering in a steep density gradient plasma

Experiments show that application of laser smoothing schemes including smoothing by spectral dispersion and polarization smoothing effectively suppresses stimulated Raman scattering from a 2{omega} (527 nm) laser beam in a low average-gain plasma with a steep density gradient. Full-wave simulations reproduce the observed trends in the data and show that the scattering reduction is an indirect result of suppressing active filamentation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microcrystalline Si films grown at low temperatures (90-220 deg. C) with high rates in atmospheric-pressure VHF plasma

This work deals with the structural properties of microcrystalline silicon (muc-Si:H) films grown at low temperatures (90-220 deg. C) with high rates in atmospheric-pressure He/H{sub 2}/SiH{sub 4} plasma, which is excited by a 150 MHz very high frequency power using a porous carbon electrode. This plasma permits to enhance the chemical reactions both in gas phase and on the film-growing surface, while suppressing ion impingement upon the surface. Raman crystalline volume fractions of the muc-Si:H films are studied in detail as functions of film thickness and substrate temperature (T{sub sub}). The results show that the muc-Si:H film deposited with 50 (SCCM) (SCCM denotes standard cubic centimeters per minute at STP) SiH{sub 4} has no amorphous transition layers at the film/substrate interface in spite of the high deposition rate of 6.4 nm/s, which is verified by the cross sectional observations with a transmission electron microscope. In addition, the T{sub sub} dependence of Raman crystallinity of the muc-Si:H films indicates that a highly crystallized muc-Si:H film grows even when T{sub sub} is reduced to 90 deg. C. Further systematic studies are needed for both device applications and deposition on thermally sensitive plastic materials.

36 MATERIALS SCIENCE↗

Enhancement in optical absorption of silicon fibrous nanostructure produced using femtosecond laser ablation

Fibrous nanostructures are proposed for the application of solar cell. Irradiation of silicon surface with a few hundred femtosecond laser pulses of fluence 13 kJ/m{sup 2} at 13 MHz pulse frequency in air atmosphere results in the formation of fibrous nanostructure layer on the treated surface that leads to a significant decrease in the reflection of visible radiation. For the visible wavelength, the decreased reflection is a result of the nature of the nanostructure. The Raman peak shift in the irradiated surface confirms that the surface is changed to amorphous silicon due to fibrous nanostructure formation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of low-temperature-buffer, rf-power, and annealing on structural and optical properties of ZnO/Al{sub 2}O{sub 3}(0001) thin films grown by rf-magnetron sputtering

ZnO thin films were epitaxially grown on Al{sub 2}O{sub 3} (0001) substrates in a radio-frequency (rf) magnetron sputtering chamber. The surface morphology of ZnO was remarkably affected by the incorporation of a low-temperature grown ZnO buffer as well as the changes in rf-power. X-ray diffractions, combined with the surface micropits, revealed strain relaxations in the ZnO epilayers grown with higher rf-powers, which in turn caused a redshift to the intrinsic exciton absorption peak. Strain relaxations were also observed in the ZnO epilayers upon thermal annealing, which led to a redshift in the E{sub 2}{sup high} Raman mode. A factor of approx0.7 cm{sup -1} GPa{sup -1}, i.e., a biaxial stress of 1 GPa can shift the E{sub 2}{sup high} mode by 0.7 cm{sup -1}, was obtained. The point defects related absorptions and the exciton localizations were suppressed by annealing, which, in conjunction with the strain-relaxation induced redshift in the intrinsic-exciton absorptions, steepened the absorption edge and increased the optical bandgap energy of the ZnO epilayer.

36 MATERIALS SCIENCE↗