Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

The experimental study of the effect of microwave on the physical properties of multi-walled carbon nanotubes

Highlights: • We study the microwave effect on the multi-walled carbon nanotubes (MWCNTs). • We examine the non uniform heating effect on the physical structure of MWCNTs. • We examine the purification of MWCNTs by microwave. • We analyze the thermal characteristics of microwave treated MWCNTs. - Abstract: This paper reports the effect of microwave on the physical properties of multi-walled carbon nanotubes (MWCNTs) where different power levels of microwave were applied on MWCNTs in order to apprehend the effect of microwave on MWCNTs distinctly. A low energy ball milling in aqueous circumstance was also applied on both MWCNTs and microwave treated MWCNTs. Temperature profile, morphological analysis by field emission scanning electron microscopy (FESEM), defect analysis by Raman spectroscopy, thermal conductivity, thermal diffusivity as well as heat transfer coefficient enhancement ratio were studied which expose some strong witnesses of the effect of microwave on the both purification and dispersion properties of MWCNTs in base fluid distilled water. The highest thermal conductivity enhancement (6.06% at 40 °C) of MWCNTs based nanofluid is achieved by five minutes microwave treatment as well as wet grinding at 500 rpm for two hours.

36 MATERIALS SCIENCE↗

Elaboration of m-cresol polyamide12/ polyaniline composite films for antistatic applications

The present work deals with the preparation of transparent antistatic films from an extreme dilution of an intrinsically conducting polymer (ICP) with not coloured polymers. Our approach is based on the chemical polymerization of a very thin layer of Polyaniline (PANI) around particles of an insulating polymer (PA12). Films were obtained by dissolving the synthesized core-shell particles in m-Cresol. The electric property and structure relationships were investigated by using dielectric relaxation spectroscopy, X-ray diffraction and micro-Raman spectroscopy. Composite films exhibited a well established dc conductivity over all the frequency range for 10 wt. % of PANI concentration related to the conductive properties of the PANI clusters. X-ray diffraction data show broader and lower intensity of PA12 peaks when increasing PANI content, probably due to the additional doping effect of m- cresol. The doping of PA12/PANI films with Dodecyl benzene sulfonic acid (DBSA) was unequivocally verified by Raman spectroscopy.

36 MATERIALS SCIENCE↗

Effect of Ion Irradiation on Amorphous and Crystalline Ge–Se and Their Application as Phase Change Temperature Sensor

Research on phase change materials is predominantly focused on their application as memory devices or for temperature control which requires low phase change temperature. The Ge–Se binary chalcogenide glass system with its wide glass-forming region is a potential candidate for high-temperature and high-radiation phase change applications. In this study, the concept of employing Ge x Se 100– x glasses to monitor high temperature (450–528 °C) using the phase change effect, is reported. Materials selection, device structure, and performance of prototype sensors are analyzed. In addition, the effect of heavy ion irradiation by Xe ions with energies of 200, 600, and 1000 keV (fluence ≈10 14 cm –2 ) on the Ge x Se 100– x ( x = 30, 33, 40) thin films and phase change devices is studied. The irradiation effect on the amorphous and crystalline structure of the thin films is evaluated by Raman spectroscopy and X-ray diffraction (XRD). Although the changes in the structural units of amorphous films are negligible, in crystalline films orthorhombic-GeSe 2 crystals are found to be most affected by irradiation and a new phase, orthorhombic GeSe is found in the thin films after irradiation. The performance of a sensor with an active film of Ge 40 Se 60 is also shown as an example.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanisms and kinetics of citrate-promoted dissolution of a uranyl phosphate mineral

The formation of uranyl phosphate precipitates is a remediation strategy to limit the mobility of uranium in contaminated soils. However, exposure to organic ligands, like the plant exudate citrate, can remobilize the uranium. The purpose of this study is to provide a more thorough comprehension of citrate-promoted dissolution of a uranyl phosphate mineral, chernikovite [(H 3 O)(UO 2 )(PO 4 )·3H 2 O], by determining the extent of uranium release from chernikovite at a wide range of citrate concentrations. Here we have quantified the kinetics of dissolution and proposed potential mechanisms of chernikovite dissolution to gain a better understanding of the fate of uranyl phosphate precipitates in the environment. Batch dissolution and continuously stirred tank reactor (CSTR) experiments indicate that increasing citrate concentrations from 0.1 mM to 50 mM increases the concentration of dissolved uranium. However, at citrate concentrations of 10 mM and greater, the effectiveness of the ligand to enhance the dissolution decreases. Density functional theory modeling and Raman spectroscopy indicate a strong interaction between citrate and the uranyl ions at the surface of the uranyl phosphate. The interaction between citrate and uranyl suggests the formation of an alteration layer of uranyl-citrate surface complexes, which could impede uranium release at citrate concentrations of 10 mM or higher. Together, these results indicate that the citrate-promoted dissolution of chernikovite is a fast reaction that is hindered by a combination of surface saturation and a secondary-phase precipitation reaction at higher concentrations of citrate and reaction times greater than or equal to 72 min based on the hydraulic residence time of CSTR experiments. These findings improve our understanding of the stability of uranyl phosphate for use in sequestration of uranium groundwater plumes at contaminated sites.

58 GEOSCIENCES↗

Amorphous TiO 2 Compact Layers via ALD for Planar Halide Perovskite Photovoltaics

A low temperature (< 120 °C) route to pinhole-free amorphous TiO 2 compact layers may pave the way to more efficient, flexible, and stable inverted perovskite halide device designs. Toward this end, we utilize low-temperature thermal atomic layer deposition (ALD) to synthesize ultra-thin (12 nm) compact TiO 2 underlayers for planar halide perovskite PV. While device performance with as-deposited TiO 2 films is poor, we identify room temperature UV-O 3 treatment as a route to device efficiency comparable to crystalline TiO 2 thin films synthesized by higher temperature methods. Here, we further explore the chemical, physical, and interfacial properties 2 that might explain the improved performance through x-ray diffraction, spectroscopic ellipsometry, Raman spectroscopy, and x-ray photoelectron spectroscopy. These findings challenge our intuition about effective electron selective layers as well as point the way to a greater selection of flexible substrates and more stable inverted device designs.

14 SOLAR ENERGY↗

Millimeter-Scale Exfoliation of hBN with Tunable Flake Thickness for Scalable Encapsulation

As a two-dimensional (2D) dielectric material, hexagonal boron nitride (hBN) is in high demand for applications in photonics, nonlinear optics, and nanoelectronics. Unfortunately, the high-throughput preparation of macroscopic-scale, high-quality hBN flakes with controlled thickness is an ongoing challenge, limiting device fabrication and technological integration. In this report we present a metal thin-film exfoliation method to prepare hBN flakes with millimeter-scale dimension, near-unity yields, and tunable flake thickness distribution from 1-7 layers, a substantial improvement over scotch tape exfoliation. The single crystallinity and high quality of the exfoliated hBN are demonstrated with optical microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation. We further explore a possible mechanism for the effectiveness and selectivity based on thin-film residual stress measurements, density functional theory calculations, and transmission electron microscopy imaging of the deposited metal films. We find that the magnitude of the residual tensile stress induced by thin film deposition plays a key role in determining exfoliated flake thickness in a manner which closely resembles 3D semiconductor spalling. Lastly, we demonstrate that our exfoliated, large-area hBN flakes can be readily incorporated as encapsulating layers for other 2D monolayers. Altogether, this method brings us one step closer to the high throughput, mass production of hBN-based 2D photonic, optoelectronic, and quantum devices.

2D materials↗

Long Lived Charge Separated States Induced by trans-Stilbene Incorporation in the Pores of Brønsted Acidic HZSM-5 Zeolites: Effect of Gallium on the Spontaneous Ionization Process

In situ CW-EPR, diffuse reflectance UV-visible spectroscopy and Raman scattering were used to monitor the spontaneous incorporation of trans-stilbene (t-St, C{sub 14}H{sub 12}) in the medium pore H{sub 2.2}-GaZSM-5 zeolites [H{sub 2.2}(GaO{sub 2}){sub 2.2}(SiO{sub 2}){sub 93.8}] by direct exposure under dry and inert atmosphere of solid t-St to dehydrated porous material without any solvent. The sorption of t-St with relatively low ionization potential (7.65 eV) occurs in Broensted acidic H{sub 2.2}-GaZSM-5 zeolites according to a complex and slow reaction sequence. First, charge separation occurs and t-St{sup {sm_bullet}+}{at}H{sub 2.2}-GaZSM-5{sup {sm_bullet}-} radical pair is created, while long-lived t-St{at}H{sub 2.2}GaZSM-5{sup {sm_bullet}-{sm_bullet}+} electron-hole pair is formed through hole transfer. The analysis of the DRUVv spectra set recorded during the t-St sorption course shows the respective concentrations of all transient species as a function of time. In particular, note that system reorganization is observed through a second type of electron-hole pair. The broad and strong bands observed in the near-IR regions over extended periods of time are tentatively assigned to the electron and/or hole spectral signatures in slightly different environments. Applying pulsed X-band EPR techniques, we were able to reveal the structural surrounding of the unpaired electrons of charge-separated states through the proper assignment of electron couplings with a large number of nuclei such as {sup 1}H, {sup 29}Si, {sup 69}Ga, and {sup 71}Ga using the two-dimensional hyperfine-sublevel correlation experiment (2D-HYSCORE). The distance measurements deduced from dipolar coupling experiments provide a unique picture of the long distance distribution of unpaired electrons generated by spontaneous ionization of t-St upon incorporation within H{sub 2.2}-GaZSM-5 zeolite. This result demonstrates that a large fraction of the unpaired electrons are ejected away from the initial site of ionization and that this compartmentalization plus the created electrostatic field hinder dramatically the propensity of charge recombination. The results for H-GaZSM-5 are compared to similar experiments conducted on H-AlZSM-5 zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Are Al{sub 2}O{sub 3} and MgO tunnel barriers suitable for spin injection in graphene?

We report on the structural impact on graphene and multi-layers graphene of the growth by sputtering of tunnel barriers. Sputtered Al{sub 2}O{sub 3} and MgO barriers were chosen for their well-known efficiency as spin injectors in spintronics devices. The impact of the growth on the structure of graphene and up to 4-layer flakes was analyzed by Raman spectroscopy. This study reveals that for Al{sub 2}O{sub 3} growth, the impact is moderate for a monolayer and decreases sharply for bilayers and above. In the case of MgO all the flakes underwent a strong amorphization. Moreover, this reveals that while single layer graphene is believed to offer the best spin transport properties, the better robustness of multilayer graphene may ultimately make it a better choice for spintronics devices.

36 MATERIALS SCIENCE↗

Low-damage high-throughput grazing-angle sputter deposition on graphene

Despite the prevalence of sputter deposition in the microelectronics industry, it has seen very limited applications for graphene electronics. In this letter, we report systematic investigation of the sputtering induced damages in graphene and identify the energetic sputtering gas neutrals as the primary cause of graphene disorder. We further demonstrate a grazing-incidence sputtering configuration that strongly suppresses fast neutral bombardment and retains graphene structure integrity, creating considerably lower damage than electron-beam evaporation. Such sputtering technique yields fully covered, smooth thin dielectric films, highlighting its potential for contact metals, gate oxides, and tunnel barriers fabrication in graphene device applications.

36 MATERIALS SCIENCE↗

Wafer-scale synthesis of multi-layer graphene by high-temperature carbon ion implantation

We report on the synthesis of wafer-scale (4 in. in diameter) high-quality multi-layer graphene using high-temperature carbon ion implantation on thin Ni films on a substrate of SiO{sub 2}/Si. Carbon ions were bombarded at 20 keV and a dose of 1 × 10{sup 15 }cm{sup −2} onto the surface of the Ni/SiO{sub 2}/Si substrate at a temperature of 500 °C. This was followed by high-temperature activation annealing (600–900 °C) to form a sp{sup 2}-bonded honeycomb structure. The effects of post-implantation activation annealing conditions were systematically investigated by micro-Raman spectroscopy and transmission electron microscopy. Carbon ion implantation at elevated temperatures allowed a lower activation annealing temperature for fabricating large-area graphene. Our results indicate that carbon-ion implantation provides a facile and direct route for integrating graphene with Si microelectronics.

36 MATERIALS SCIENCE↗

Enhanced field emission of plasma treated multilayer graphene

Electron emission properties of multilayer graphene (MLG) prepared by a facile exfoliation technique have been studied. Effect of CO{sub 2} Ar, N{sub 2}, plasma treatment was studied using Raman spectroscopy and investigated for field emission based application. The CO{sub 2} plasma treated multilayer graphene shows an enhanced field emission behavior with a low turn on field of 0.18 V/μm and high emission current density of 1.89 mA/cm{sup 2} at an applied field of 0.35 V/μm. Further the plasma treated MLG exhibits excellent current stability at a lower and higher emission current value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Superconductivity and electron-phonon interaction in Sr x Bi 2 Se 3 under pressure

Pressure-induced superconductivity has been widely explored and observed in Bi 2 Se 3 -based topological materials to hunt for topological superconductors. Although their triggered superconductivity has a close connection to their pressure-induced structural phase transitions, the quest for the electron pairing mechanism of these superconducting semiconductors in both their initial rhombohedral and high-pressure phases remains unknown. In this work, we present a systematic study of the pressure effect on superconducting properties and lattice dynamics using a combination of electrical transport, Raman-scattering, and synchrotron x-ray diffraction measurements using diamond anvil cells. One key finding is our observation of a cooperative connection between the strength of the electron–phonon interaction (EPI) generated by optical branches and the pressure-tunable superconductivity in rhombohedral Sr x Bi 2 Se 3 crystal. The underlying suppression mechanism of the T c by pressure is ascribed to the weakening of the electrons' interaction with the optical phonon modes in the rhombohedral phase. In the intermediate monoclinic phase, the T c value underwent a sharp increase with carrier density accumulation accompanying the concurrent enhanced EPI. This is intuitively unusual since it is expected that the EPI shall be weakened by inducing more conducting carriers in a normal metal. In the tetragonal phase, the superconductivity is interpreted within BCS theory, since it is fully metallized and obeys the adiabatic Born–Oppenheimer approximation well. Our findings are important to fully understand unconventional superconductivity and the unusual pairing mechanism in the layered rhombohedral Bi 2 Se 3 -based superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stimulated Raman adiabatic passage in an open quantum system: Master equation approach

A master equation approach to the study of environmental effects in the adiabatic population transfer in three-state systems is presented. A systematic comparison with the non-Hermitian Hamiltonian approach [Vitanov and Stenholm, Phys. Rev. A 56, 1463 (1997)] shows that, in the weak-coupling limit, the two treatments lead to essentially the same results. In contrast, in the strong-damping limit the predictions are quite different: In particular, the counterintuitive sequences in the STIRAP scheme turn out to be much more efficient than expected before. This point is explained in terms of quantum Zeno dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Morphological Characterization of UO 2 F 2 and UF 4 Hydrolysis Products

Bulk samples of UO 2 F 2 and UF 4 were aged for 3 weeks under various relative humidity (RH) conditions to examine morphological changes associated with the hydrolysis of the materials. Aged samples were analyzed using scanning electron microscopy (SEM) to examine morphological changes, and Raman spectroscopy was used to correlate these changes with chemical composition. Little to no effect was evident for either material under lower RH conditions (i.e., 16% and 33%–38% RH). Under higher RH conditions (83% and 99%), multiple morphological changes were evident within the UO 2 F 2 samples because of the formation of hydrolysis products and possible interactions at the solid–vapor interface. Only one major morphological change was observed over the aging period—within the UF 4 system at 99% RH. This change can be attributed to the initial formation of anhydrous UO 2 F 2 and, subsequently, its hydrolysis products. After 37 weeks, UO 2 F 2 persisted as a hydrolysis product of UF4; however, no further hydrolysis products were observed. These results suggest that further research into a possible divergence of UF 4 and UO 2 F 2 degradation pathways is warranted.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Rapid Growth of Nanostructured Diamond Film on Silicon and Ti–6Al–4V Alloy Substrates

Nanostructured diamond (NSD) films were grown on silicon and Ti–6Al–4V alloy substrates by microwave plasma chemical vapor deposition (MPCVD). NSD Growth rates of 5 µm/h on silicon, and 4 µm/h on Ti–6Al–4V were achieved. In a chemistry of H2/CH4/N2, varying ratios of CH4/H2 and N2/CH4 were employed in this research and their effect on the resulting diamond films were studied by X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, and atomic force microscopy. As a result of modifying the stock cooling stage of CVD system, we were able to utilize plasma with high power densities in our NSD growth experiments, enabling us to achieve high growth rates. Substrate temperature and N2/CH4 ratio have been found to be key factors in determining the diamond film quality. NSD films grown as part of this study were shown to contain 85% to 90% sp3 bonded carbon.

36 MATERIALS SCIENCE↗

Chemical abrasion: the mechanics of zircon dissolution

Chemical abrasion is a technique that combines thermal annealing and partial dissolution in hydrofluoric acid (HF) to selectively remove radiation-damaged portions of zircon crystals prior to U–Pb isotopic analysis, and it is applied ubiquitously to zircon prior to U–Pb isotope dilution thermal ionization mass spectrometry (ID-TIMS). The mechanics of zircon dissolution in HF and the impact of different leaching conditions on the zircon structure, however, are poorly resolved. We present a microstructural investigation that integrates microscale X-ray computed tomography (µCT), scanning electron microscopy, and Raman spectroscopy to evaluate zircon dissolution in HF. We show that µCT is an effective tool for imaging metamictization and complex dissolution networks in three dimensions. Acid frequently reaches crystal interiors via fractures spatially associated with radiation damage zoning and inclusions to dissolve soluble high-U zones, some inclusions, and material around fractures, leaving behind a more crystalline zircon residue. Other acid paths to crystal cores include the dissolution of surface-reaching inclusions and the percolation of acid across zones with high defect densities. In highly crystalline samples dissolution is crystallographically controlled with dissolution proceeding almost exclusively along the c axis. Increasing the leaching temperature from 180 to 210 °C results in deeper etching textures, wider acid paths, more complex internal dissolution networks, and greater volume losses. How a grain dissolves strongly depends on its initial radiation damage content and defect distribution as well as the size and position of inclusions. As such, the effectiveness of any chemical abrasion protocol for ID-TIMS U–Pb geochronology is likely sample-dependent. We also briefly discuss the implications of our findings for deep-time (U-Th)/He thermochronology.

58 GEOSCIENCES↗

Lithography-free approach to highly efficient, scalable SERS substrates based on disordered clusters of disc on pillar structures

We present a lithography-free technological strategy that enables fabrication of large area substrates for surface-enhanced Raman spectroscopy (SERS) with excellent performance in the red to NIR spectral range. Our approach takes advantage of metal dewetting as a facile means to create stochastic arrays of circular patterns suitable for subsequent fabrication of plasmonic disc-on-pillar (DOP) structures using a combination of anisotropic reactive ion etching (RIE) and thin film deposition. Consistent with our previous studies of individual DOP structures, pillar height which, in turn, is defined by the RIE processing time, has a dramatic effect on the SERS performance of stochastic arrays of DOP structures. Our computational analysis of model DOP systems confirms the strong effect of the pillar height and also explains the broadband sensitivity of the implemented SERS substrates. Our Raman mapping data combined with SEM structural analysis of the substrates exposed to benzenethiol solutions indicates that clustering of shorter DOP structures and bundling of taller ones is a likely mechanism contributing to higher SERS activity. Nonetheless, bundled DOP structures appeared to be consistently less SERS-active than vertically aligned clusters of DOPs with optimized parameters. The latter are characterized by average SERS enhancement factors above 10^7.

field enhancement↗

Cobalt ferrite nanoparticles under high pressure

We report by the first time a high pressure X-ray diffraction and Raman spectroscopy study of cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles carried out at room temperature up to 17 GPa. In contrast with previous studies of nanoparticles, which proposed the transition pressure to be reduced from 20–27 GPa to 7.5–12.5 GPa (depending on particle size), we found that cobalt ferrite nanoparticles remain in the spinel structure up to the highest pressure covered by our experiments. In addition, we report the pressure dependence of the unit-cell parameter and Raman modes of the studied sample. We found that under quasi-hydrostatic conditions, the bulk modulus of the nanoparticles (B{sub 0} = 204 GPa) is considerably larger than the value previously reported for bulk CoFe{sub 2}O{sub 4} (B{sub 0} = 172 GPa). In addition, when the pressure medium becomes non-hydrostatic and deviatoric stresses affect the experiments, there is a noticeable decrease of the compressibility of the studied sample (B{sub 0} = 284 GPa). After decompression, the cobalt ferrite lattice parameter does not revert to its initial value, evidencing a unit cell contraction after pressure was removed. Finally, Raman spectroscopy provides information on the pressure dependence of all Raman-active modes and evidences that cation inversion is enhanced by pressure under non-hydrostatic conditions, being this effect not fully reversible.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗