Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOELECTRICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Intelligent Sun Tracking for a CPV Power Plant

The output of a solar panel is strongly dependent on the amount of perpendicular light flux falling on its surface, and a tracking system tries to parallel the vector area of the solar panel surface to the incident solar flux. We present a tracking technique based on a two-axis sun sensor which can be used to increase the power output from a number of CPV arrays connected together in a solar power plant. The outdoor testing procedure of the developed two-axis sun sensor is discussed. The detail of the algorithm used together with the related sun tracking equipment is also presented and discussed for the new two axes sun tracking system.

14 SOLAR ENERGY↗

InGaP/GaAs Inverted Dual Junction Solar Cells For CPV Applications Using Metal-Backed Epitaxial Lift-Off

The epitaxial lift-off (ELO) technique has been combined with inverted III-V PV cell epitaxial growth with the aim of employing thin film PV cells in HCPV systems. In a stepwise approach to the realization of an inverted triple junction on a MELO platform we have first grown a GaAs single junction PV cell to establish the basic layer release process and cell processing steps followed by the growth, fabrication and test of an inverted InGaP/GaAs dual junction structure.

36 MATERIALS SCIENCE↗

GaAs, AlGaAs and InGaP Tunnel Junctions for Multi-Junction Solar Cells Under Concentration: Resistance Study

The following four TJ designs, AlGaAs/AlGaAs, GaAs/GaAs, AlGaAs/InGaP and AlGaAs/GaAs are studied to determine minimum doping concentration to achieve a resistance of <10{sup -4} {omega}{center_dot}cm{sup 2} and a peak tunneling current suitable for MJ solar cells up to 1500-suns concentration (operating current of 21 A/cm{sup 2}). Experimentally calibrated numerical models are used to determine how the resistance changes as a function of doping concentration. The AlGaAs/GaAs TJ design is determined to require the least doping concentration to achieve the specified resistance and peak tunneling current, followed by the GaAs/GaAs, and AlGaAs/AlGaAs TJ designs. The AlGaAs/InGaP TJ design can only achieve resistances >5x10{sup -4} {omega}cm{sup 2}.

36 MATERIALS SCIENCE↗

Water Cooled TJ Dense Array Modules for Parabolic Dishes

AZUR SPACE Solar Power GmbH has developed a novel type of dense array module for use in parabolic dishes. Such dishes never produce a perfectly homogeneous, rectangular light spot but an inhomogeneous light distribution. A regular module would use this light distribution very inefficiently. Therefore AZUR SPACE developed a dense array module concept which can be adapted to inhomogeneous light spots. It is populated with state of the art triple junction solar cells.The modules are designed for light intensities in the range of 50-100 W/cm{sup 2} and are actively water cooled. Prototypes are installed in 11 m{sup 2} parabolic dishes produced by Zenith Solar. A peak output of 2.3 kW electrical and 5.5 kW thermal power could be demonstrated. The thermal power may be used for solar heating, solar cooling or warm water.

14 SOLAR ENERGY↗

Broadening of optical transitions in polycrystalline CdS and CdTe thin films

The dielectric functions {epsilon} of polycrystalline CdS and CdTe thin films sputter deposited onto Si wafers were measured from 0.75 to 6.5 eV by in situ spectroscopic ellipsometry. Differences in {epsilon} due to processing variations are well understood using an excited carrier scattering model. For each sample, a carrier mean free path {lambda} is defined that is found to be inversely proportional to the broadening of each of the band structure critical points (CPs) deduced from {epsilon}. The rate at which broadening occurs with {lambda}{sup -1} is different for each CP, enabling a carrier group speed {upsilon}{sub g} to be identified for the CP. With the database for {upsilon}{sub g}, {epsilon} can be analyzed to evaluate the quality of materials used in CdS/CdTe photovoltaic heterojunctions.

36 MATERIALS SCIENCE↗

From amorphous to microcrystalline: Phase transition in rapid synthesis of hydrogenated silicon thin film in low frequency inductively coupled plasmas

Hydrogenated silicon (Si:H) thin films were fabricated on glass substrates by low frequency inductively coupled plasma-assisted chemical vapor deposition using a silane precursor with low hydrogen dilution at room temperature. The crystallinity and microstructure properties of the Si:H thin films deposited at different inductive radio-frequency (rf) power density were systematically studied by Raman spectroscopy, x-ray diffraction, and scanning electron microscopy. We found that at a low rf power density of 16.7 to 20.8 mW/cm{sup 3}, the structure of silicon thin films evolves from a completely amorphous phase to an intermediate phase containing both amorphous and microcrystalline silicon. As the power density is increased to a moderate value of 25 mW/cm{sup 3}, a highly crystallized (111)-preferred hydrogenated microcrystalline silicon ({mu}c-Si:H) film featuring a vertically aligned cone-shaped structure, is emerging. Both the crystallinity and deposition rate exhibit a monotonic increase with the increase in the rf power density, reaching a maximum value of 85% and 1.07 nm/s, respectively, at a power density of 41.7 mW/cm{sup 3}. Scanning electron microscopy reveals that continuous and dense {mu}c-Si:H films with grain size of tens to hundreds nanometers can be achieved deterministically without the formation of amorphous incubation layer, and this is of great importance for synthesis of multilayer structures in p-i-n solar cells. The formation mechanism of the {mu}c-Si:H films and the elimination of the amorphous incubation layer are explained in terms of the high electron density and the plasma-surface interactions.

36 MATERIALS SCIENCE↗

Nanocomposite Solar Cells from ''Dirty''TiO{sub 2} Nanoparticles

TiO{sub 2} solar cells were fabricated consisting TiO{sub 2} layer, TiO{sub 2} nanocomposite layers, electrolyte polymer and counter electrode layer. It was found that TiO{sub 2} nanocomposite layer that contains metal (Zn) contact could be conductive and make better charge transfer than pure TiO{sub 2}. Conversion efficiency 1.0% was achieved using TiO2 nanocomposite. It indicates that using of TiO{sub 2} nanocomposite is an effective technique for improvement of conversion efficiency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth of ZnO:Al thin films onto different substrates

In this paper we present some results regarding undoped and doped ZnO thin films deposited on various substrates like glass, silicon and kapton by rf magnetron sputtering. The influence of the amount of aluminum as well as the usage of different substrates on the final photovoltaic properties of the thin films is studied. For this, structural-morphological and optical investigations on the thin films are conducted. It was found that three important factors must be taken into account for adjusting the final desired application intended for the deposited thin films. These factors are: deposition conditions, the nature of both the dopant material and the substrate. A comparison study between undoped and doped case is also realized. Smooth Al doped ZnO thin films with a polycrystalline structure and a lower roughness than undoped ZnO are obtained.

36 MATERIALS SCIENCE↗

Exciton formation as a rate limiting step for charge recombination in disordered organic molecules or polymers

The exciton formation (direct charge recombination) is studied and quantified as a function of material physical-properties such as the exciton binding energy, the exciton lifetime, and the mechanism causing the electronic disorder. By using a model that is an extension of a charge transport model [Y. Preezant and N. Tessler, Phys. Rev. B 74, 235202 (2006)] we are able to compare the direct exciton formation rate with the one predicted by the Langevin model. Using reasonable material parameters we find that in many cases the overall balance between free charge carrier and excitons is significantly affected by the exciton formation rate with its values being significantly low compared to the Langevin rate. We also find that in order to describe the complete recombination process it is important to introduce an intermediate state which we term exciton-precursor. This is in contrast to the common practice of using the Langevin model which embeds the assumption that the exciton formation rate is negligibly fast. The relations found between the physical-properties and the recombination rate can explain why certain materials exhibit Langevin rate while others exhibit significantly suppressed rates. This would eventually lead to the design of new materials better suited for either photocells or light-emitting diodes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Relationship of deep defects to oxygen and hydrogen content in nanocrystalline silicon photovoltaic materials

We report measurements of the structural and compositional properties of a range of hydrogenated nanocrystalline films. We employed Raman spectroscopy for crystallinity and time-of-flight secondary ion mass spectroscopy (TOF-SIMS) for impurity characterizations. The crystalline volume fractions and impurity levels are correlated with the deep state densities determined by drive level capacitance profiling. Those defects were found to have a thermal emission energy of 0.65{+-}.05 eV. We found that the overall crystallinity correlated reasonably well with the density of such defect states and also found a strong correlation between the defect density and the levels of oxygen impurities. Possible origins of these defects are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular Electronics - Current Challenges

Molecular electronics is a flourishing area of nano-science and -technology, with a promise for cheap electronics of novel functionality. Here we outline the major challenges for molecular electronics becoming an established scientific discipline, including models with predictive power.

74 ATOMIC AND MOLECULAR PHYSICS↗

Structural and optical properties of InGaN-GaN nanowire heterostructures grown by molecular beam epitaxy

InGaN/GaN nanowire (NW) heterostructures grown by plasma assisted molecular beam epitaxy were studied in comparison to their GaN and InGaN counterparts. The InGaN/GaN heterostructure NWs are composed of a GaN NW, a thin InGaN shell, and a multifaceted InGaN cap wrapping the top part of the GaN NW. High-resolution transmission electron microscopy (HRTEM) images taken from different parts of a InGaN/GaN NW show a wurtzite structure of the GaN core and the epitaxial InGaN shell around it, while additional crystallographic domains are observed whithin the InGaN cap region. Large changes in the lattice parameter along the wire, from pure GaN to higher In concentration demonstrate the successful growth of a complex InGaN/GaN NW heterostructure. Photoluminescence (PL) spectra of these heterostructure NW ensembles show rather broad and intense emission peak at 2.1 eV. However, {mu}-PL spectra measured on single NWs reveal a reduced broadening of the visible luminescence. The analysis of the longitudinal optical phonon Raman peak position and its shape reveal a variation in the In content between 20% and 30%, in agreement with the values estimated by PL and HRTEM investigations. The reported studies are important for understanding of the growth and properties of NW heterostructures suitable for applications in optoelectronics and photovoltaics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Driving vertical phase separation in a bulk-heterojunction by inserting a poly(3-hexylthiophene) layer for highly efficient organic solar cells

A desirable vertical phase separation of a bulk-heterojunction was achieved by inserting a P3HT layer between the blend layer and the poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) layer. According to the high (PEDOT:PSS) and low (P3HT) surface energies of substrate, it might be possible to modulate the vertical phase separation in the bulk-heterojunction. The result of vertical phase separation was determined using time-of-flight secondary-ion mass spectroscopy analysis. A controlled thickness of 50 nm for the inserted P3HT layer prevented undesirable light absorption and the power conversion efficiency of this condition was increased by 44% compared to that of a reference device.

36 MATERIALS SCIENCE↗

Optimization and Characterisation of Amorphous Iron Disilicide formed by Ion Beam Mixing of Fe/Si Multilayer Structures for Photovoltaic Applications

This study presents an optimization and characterization of amorphous Iron Disilicide (a-FeSi{sub 2}) synthesized using Ion Beam Mixing (IBM) of Fe/Si multilayer structures. The layers were deposited using RF magnetron sputtering, and subsequently irradiated with Ar{sup +} and Fe{sup +} beams of 150 and 200 keV. Rutherford Back Scattering (RBS) analysis was used to determine the structure and level of silicidation of the samples. The nature of the band-gap and the optical absorption coefficients were determined by optical transmission analysis. The results demonstrate that the synthesis of a-FeSi{sub 2} can be achieved using this technique, with the total level of silicidation being highly dependant upon the initial structure configuration and beam parameters. Direct band-gap energies of {approx}0.90 eV have been observed for those samples with the highest levels of silicidation, with optical absorption coefficients of {approx}10{sup 4} cm{sup -1}. Therefore this method of fabrication has been shown to produce a-FeSi{sub 2} layers without the need for post-synthesis treatment, using established technologies without compromising the optical properties that make this material such a promising semiconductor for the photovoltaics market.

36 MATERIALS SCIENCE↗

Inverted organic solar cells comprising a solution-processed cesium fluoride interlayer

We investigate the influence of solution-processed cesium fluoride (CsF) interlayers on the performance of inverted polymer solar cells comprising a blend of poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl C{sub 61}-butyric acid methyl ester. The thickness of the CsF layer is optimized in terms of current-voltage characteristics by a variation of the solid content in solution. Capacitance-voltage characteristics reveal a shift of the built-in voltage at the cathode interface by about 0.3 V as compared to devices without a CsF layer, giving rise to an increase in open-circuit voltage by the same value. The vertical distribution of Cs{sup +} and F{sup +} ions is studied by secondary ion mass spectroscopy, indicating a strong diffusion of the alkaline fluoride into the organic layer stack.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect states in nc-Si:H films investigated by surface photovoltage spectroscopy

Hydrogenated nanocrystalline silicon (nc-Si:H) is a multiphase, heterogeneous material, composed of Si nanocrystals embedded in an amorphous matrix. It has been intensively studied recently due to very promising photovoltaic and optoelectronics applications. The present paper aims to study electronic transitions in nc-Si:H grown by Low Energy Plasma Enhanced Chemical Vapor Deposition by Surface Photovoltage Spectroscopy. The study of several thin films grown at different conditions and the comparison with recently published computational studies allowed us to advance a hypothesis on the defect structure responsible for electronic transitions in nc-Si:H.

36 MATERIALS SCIENCE↗

Polarization-sensitive photoresponse of nanographite

We report on polarization-sensitive direct current photoresponse of nanographite films in a 532-4000 nm spectral range. It is found that irradiation of the nanographite by the nanosecond laser pulses produces the electric current with intensity depending on the incidence angle and polarization of the laser beam. The obtained dependencies of the photoresponse on wavelength and polarization of excitation laser beam are discussed in terms of the surface photogalvanic and photon drag effects.

36 MATERIALS SCIENCE↗

A method to characterize the sheet resistance of a laser doped line on crystalline silicon wafers for photovoltaic applications

A theory is presented that correlates the different sheet resistance (R{sub sh}) values of the same phosphorus laser doped (LD) line approximated by two different methods: the LD box and transfer length measurement (TLM) methods. By modeling the LD line junction profile, an effective R{sub sh} value using the LD box method is obtained and used to derive the R{sub sh} upper limit (R{sub sh.UL}) of the LD line. This value matches within {+-}10% of the R{sub sh.UL} value obtained using the TLM method across four lasing speeds. Subsequently, a LD box method is introduced to determine the LD line R{sub sh.UL} easily without modeling work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗