Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Organic LED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Tuning Organic Semiconductor Packing and Morphology through Non-equilibrium Solution Processing (Final Report)

Organic semiconductors (OSCs) are a promising candidate to produce low-cost, large area, and flexible electronics. There has previously been successful development of organic field effect transistors (OFETs), photovoltaics (OPV), and bioelectronics using OSCs. Solution processing of these materials allows for the fabrication of large-area devices in the kinetic crystallization regime. The charge transport capabilities have been shown to depend on the morphology and molecular packing of the OSC within thin films. Our hypothesis is that solution processing conditions may significantly impact OSC morphology and as a result the charge transport. Therefore, this work has focused on obtaining a fundamental understanding of the morphology and molecular packing of OSCs for optimal device performance. Through our work, we have gained a better understanding of how these structural conditions were influenced by the solution processing conditions. Our studies have led to a more systematic understanding of the various parameters that impact OSC morphology. Solution processing leads to non-equilibrium films, thus allowing for the formation of diverse morphologies that are inaccessible by other fabrication methods. Previously, our group has focused on tuning the morphology of small-molecular OSCs [53, 55-57]. However, little work had been devoted to polymer OSCs. There was a lack of detailed studies characterizing the solution-state of polymer OSCs in terms of their conformation, degree of entanglement, polymer aggregation, and chain relaxation dynamics. The solution state properties are also likely to be influenced by the rigidity and molecular weight of the polymer OSCs investigated. Thus, we have focused our attention on gaining a better insight of polymer OSC films and solution processing methods. Through this proposal, our approach is to investigate the correlation between solution-state properties and the morphology of the resulting polymer OSC films. We worked three specific aims: investigate the effects of 1) polymer OSC solution-state properties on final film morphology; 2) molecular additives on the solution-state and final film properties; 3) controlled pre-aggregation in the solution-state in the final film morphology. More rigid and planar polymer backbones should promote interchain charge transport and more efficient interchain hopping between polymer chains. Through tailoring the polymer backbone, polymer sidechains, and molecular weight, we expected the altered solution-state properties to affect the final film morphology. In addition, reducing the entanglements and promoting chain alignment will likely prevent charge carrier trapping through conformation disorders. We thus studied different mechanisms, such as molecular additives, to reduce entanglements in solution. Devices fabricated from these solutions were expected to have improved charge transport abilities. In addition to tailoring the solution-state characteristics of the polymer OSCs, we investigated the effect of solution processing methods on the molecular packing and morphology of polymer OSC films. Two main solution processing techniques, e.g., spin-coating and solution shearing, were employed to fabricate OFETs. Spin coating was employed to prepare OSC films, which produce isotropic films. This technique creates several parameters to tune such as spin coating speed, acceleration, and time. Additionally, our research group developed the solution shearing method, which consists of the solution initially sandwiched between two plates. By sliding the top plate, the solution front is exposed and drying begins. This technique allows for the creation of aligned large crystalline domains. Solution shearing consists of different processing parameters which can affect the final morphology, such as shearing speed, substrate temperature and temperature gradient, distance between both plates, and the tilt angle of the top plate. Due to the complexity of the polymer systems investigated, numerous techniques were employed to characterize the polymer OSC solution state and films. All the materials were characterized using the DOE supported synchrotron X-ray scattering facilities at the Stanford Synchrotron Radiation Lightsource (SSRL). Using grazing incidence X-ray scattering (GIXS) and Near Edge X-ray Absorption Fine Structure (NEXAFS) techniques, the crystalline structure and molecular orientations of the thin films were measured. Optical absorption (UV-Vis) spectroscopy was employed to determine the aggregation state in solution and films of the polymer systems. Polarized UV-Vis also allowed for the determination of the relative degree of polymer chain alignment for solution sheared films. Additionally, various other techniques were used to investigate other properties within the film, such as atomic force microscopy (AFM) and solution rheology. Finally, the device performance is quantified through the fabrication and characterization of OFETs, which will highlight the effects of morphology on charge transport.

36 MATERIALS SCIENCE↗

The effect of repeated hurricanes on the age of organic carbon in humid tropical forest soil

Abstract Increasing hurricane frequency and intensity with climate change is likely to affect soil organic carbon (C) stocks in tropical forests. We examined the cycling of C between soil pools and with depth at the Luquillo Experimental Forest in Puerto Rico in soils over a 30‐year period that spanned repeated hurricanes. We used a nonlinear matrix model of soil C pools and fluxes (“soilR”) and constrained the parameters with soil and litter survey data. Soil chemistry and stable and radiocarbon isotopes were measured from three soil depths across a topographic gradient in 1988 and 2018. Our results suggest that pulses and subsequent reduction of inputs caused by severe hurricanes in 1989, 1998, and two in 2017 led to faster mean transit times of soil C in 0–10 cm and 35–60 cm depths relative to a modeled control soil with constant inputs over the 30‐year period. Between 1988 and 2018, the occluded C stock increased and δ 13 C in all pools decreased, while changes in particulate and mineral‐associated C were undetectable. The differences between 1988 and 2018 suggest that hurricane disturbance results in a dilution of the occluded light C pool with an influx of young, debris‐deposited C, and possible microbial scavenging of old and young C in the particulate and mineral‐associated pools. These effects led to a younger total soil C pool with faster mean transit times. Our results suggest that the increasing frequency of intense hurricanes will speed up rates of C cycling in tropical forests, making soil C more sensitive to future tropical forest stressors.

14C↗

Real-Time Control of Diesel Combustion Quality

Detroit Diesel Corporation (DDC) and ORNL established this CRADA to improve heavy-duty engine efficiency with reduced emissions at relatively extreme operating regimes such has high EGR, low-load, and cold-start, with an emphasis on the application of advanced control strategies. The approach used in this collaborative effort was to include the application of novel analysis and modeling techniques devel-oped from the application of nonlinear dynamics and chaos theory. More specifically, analytical tech-niques derived from these theories were to used to detect, characterize, and control the combustion insta-bilities that are responsible for poor combustion performance and corresponding high emissions. The foundation of this CRADA was established based on ORNL expertise on the fundamentals of ad-vanced combustion operation and experience with nonlinear dynamics and controls in combustion sys-tems. The initial plan was all data generation would be performed at DDC with an agreed upon experi-mental plan formed by both organizations. While numerous experiments were performed at DDC and the data was exchanged with ORNL researchers, the team decided to transfer an engine to ORNL to allow more flexibility and data generation opportunities. A prototype DDC Series 60 with a common rail fuel system was selected and installed at ORNL. DDC and ORNL maintained a strong collaboration throughout much of this project. Direct funding from DOE ended in 2004 and DDC continued to fund at a reduced amount through 2007. This CRADA has not been funded in more recent years but has been maintained active in anticipation of restored funding. This CRADA has led to additional collaborations between DDC and ORNL.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Final CRADA Report ORNL-00-0609, Real-Time Control of Diesel Combustion Quality

Detroit Diesel Corporation (DDC) and ORNL established this CRADA to improve heavy-duty engine efficiency with reduced emissions at relatively extreme operating regimes such has high EGR, low-load, and cold-start, with an emphasis on the application of advanced control strategies. The approach used in this collaborative effort was to include the application of novel analysis and modeling techniques developed from the application of nonlinear dynamics and chaos theory. More specifically, analytical techniques derived from these theories were to used to detect, characterize, and control the combustion instabilities that are responsible for poor combustion performance and corresponding high emissions. The foundation of this CRADA was established based on ORNL expertise on the fundamentals of advanced combustion operation and experience with nonlinear dynamics and controls in combustion systems. The initial plan was all data generation would be performed at DDC with an agreed upon experimental plan formed by both organizations. While numerous experiments were performed at DDC and the data was exchanged with ORNL researchers, the team decided to transfer an engine to ORNL to allow more flexibility and data generation opportunities. A prototype DDC Series 60 with a common rail fuel system was selected and installed at ORNL. DDC and ORNL maintained a strong collaboration throughout much of this project. Direct funding from DOE ended in 2004 and DDC continued to fund at a reduced amount through 2007. This CRADA has not been funded in more recent years but has been maintained active in anticipation of restored funding. This CRADA has led to additional collaborations between DDC and ORNL. The objectives are to: (1) Explore and establish boundaries of high efficiency clean combustion (HECC) modes on a DDC heavy-duty diesel engine; (2) Improve fundamental understanding of combustion instabilities for use in the development of predictive controls and diagnostics; and (3) Develop and evaluate potential control strategies for enabling and/or expanding HECC operation on a multi-cylinder diesel engine.

Wagner, Robert M↗

Life-Threatening Complication During Percutaneous Ablation of Adrenal Gland Metastasis: Takotsubo Syndrome

A rare life-threatening complication during percutaneous cryoablation of an adrenal gland metastasis from a lung carcinoma is reported. The patient presented hypertensive crisis at the beginning of the thawing cycle, followed by electrocardiographic change which necessitated interruption of the procedure and his transfer to the intensive care unit with suspicion of heart infarct. There was a slight increase in cardiac enzyme levels, and ventricular angiography demonstrated transient hypokinesis-dyskinesis of the mid left ventricular segments without apical involvement, while the coronary arteries showed no significant stenosis on coronarography. These findings led to the diagnosis of Takotsubo cardiomyopathy left ventricular dysfunction syndrome. This is the first case of Takotsubo cardiomyopathy occurring as a complication during percutaneous ablation of an adrenal gland tumor.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Nuclear forensic analysis of an unknown uranium ore concentrate sample seized in a criminal investigation in Australia

In early 2009, a state policing agency raided a clandestine drug laboratory in a suburb of a major city in Australia. While searching the laboratory, they discovered a small glass jar labelled “Gamma Source” and containing a green powder. The powder was radioactive. This paper documents the detailed nuclear forensic analysis undertaken to characterize and identify the material and determine its provenance. Isotopic and impurity content, phase composition, microstructure and other characteristics were measured on the seized sample, and the results were compared with similar material obtained from the suspected source (ore and ore concentrate material). While an extensive range of parameters were measured, the key ‘nuclear forensic signatures’ used to identify the material were the U isotopic composition, Pb and Sr isotope ratios, and the rare earth element pattern. These measurements, in combination with statistical analysis of the elemental and isotopic content of the material against a database of uranium ore concentrates sourced from mines located worldwide, led to the conclusion that the seized material (a uranium ore concentrate of natural isotopic abundance) most likely originated from Mary Kathleen, a former Australian uranium mine.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhanced human papillomavirus type 8 oncogene expression levels are crucial for skin tumorigenesis in transgenic mice

Human papillomavirus 8 (HPV8) is involved in skin cancer development in epidermodysplasia verruciformis patients. Transgenic mice expressing HPV8 early genes (HPV8-CER) developed papillomas, dysplasias and squamous cell carcinomas. UVA/B-irradiation and mechanical wounding of HPV8-CER mouse skin led to prompt papilloma induction in about 3 weeks. The aim of this study was to analyze the kinetics and level of transgene expression in response to skin irritations. Transgene expression was already enhanced 1 to 2 days after UVA/B-irradiation or tape-stripping and maintained during papilloma development. The enhanced transgene expression could be assigned to UVB and not to UVA. Papilloma development was thus always paralleled by an increased transgene expression irrespective of the type of skin irritation. A knock-down of E6 mRNA by tattooing HPV8-E6-specific siRNA led to a delay and a lower incidence of papilloma development. This indicates that the early increase of viral oncogene expression is crucial for induction of papillomatosis.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Prolonged Stability of Pb-Catalyzed CO 2 Electroreduction to Methyl Formate in Acidic Methanol

Electrochemical CO 2 reduction from renewable energy is a promising route to mitigate greenhouse gas emissions from waste sources while generating value-added products. CO 2 electroreduction in methanol is particularly interesting due to the increased CO 2 solubility compared to water and the propensity to form methyl formate, a product absent in aqueous electrolysis. Here, four factors have been identified as critical to achieving prolonged high selectivity for methyl formate production on a Pb cathode in methanol: high pH near the electrode, low bulk pH, low water content, and regeneration of Pb 2+ sites. Increasing concentration of the formic acid product was observed to induce a selectivity shift towards hydrogen, which was mitigated by the in-situ conversion of the formic acid to methyl formate via an esterification reaction. Furthermore, co-electrolysis of CO 2 with dilute molecular oxygen (4% O 2 ) led to Pb catalyst repair through in-situ surface oxidation. Using CO 2 and dilute O 2 along with single-pass catholyte flow to maintain a low formic acid concentration, sustained high selectivity for methyl formate was attained at ~60% faradaic efficiency at -20 mA cm -2 for over 72 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A fundamental study on the [(μ-Cl) 3 Mg 2 (THF) 6 ] + dimer electrolytes for rechargeable Mg batteries

We present a fundamental study on [(μ-Cl) 3 Mg 2 (THF) 6 ] + dimer electrolytes using various physical methods including Subambient Pressure Ionization with Nanoelectrospray Mass spectrometry (SPIN-MS), Raman spectroscopy, 25 Mg{ 1 H} NMR, 27 Al{ 1 H} NMR and electrochemical analysis. For the first time, long time sought THF solvated [MgCl] + species was experimentally characterized by SPIN mass spectrometry in the solution of the Mgdimer containing electrolyte, confirming the mono-Cl- abstraction reaction between MgCl 2 and an Al Lewis acid. Solvated MgCl 2 in the electrolyte was confirmed by Raman spectroscopy. The experimental results establish the previously proposed dimerization equilibrium of solvated [MgCl] + and MgCl2 with [(μ-Cl) 3 Mg 2 (THF)6] + . 25 Mg{ 1 H} NMR, 27 Al{ 1 H} NMR and electrochemical analysis on chloration reaction of [(μ-Cl) 3 Mg 2 (THF) 6 ]AlPh 3 Cl with external Cl- led to further insights on the coordination chemistry of the dimer electrolyte. Finally, a comprehensive mechanism is proposed for the reversible electrochemical Mg deposition and stripping and Mg 2+ and Cl- ion transports of the Mg dimer electrolytes in rechargeable Mg batteries.

25 ENERGY STORAGE↗

Effect of Materials on the Autoignition of Cyclopentane

Cyclopentane, a flammable hydrocarbon, is being considered as a working fluid for waste heat recovery applications. Experiments were conducted to determine the ignition delay time (IDT) of cyclopentane using an Ignition Quality Test (IQT) device. Two sets of experiments were conducted per ASTM D6890 (with exception to charge pressure and temperature) to determine ignition delay of the fuel at atmospheric pressure for normal air ({approx}21% oxygen) and vitiated air (13.3% oxygen) at a temperature of 530 C. Operation of the IQT device at a much lower pressure (1 bar) than normal operation (21.1 bar) led to very rich conditions and wetting of the stainless steel chamber walls. Catalytic effects produced small IDTs. Experiments were repeated with a modified injector to prevent wall wetting, resulting in average IDTs that are substantially longer.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Shale gas and non-aqueous fracturing fluids: Opportunities and challenges for supercritical CO₂

Hydraulic fracturing of shale formations in the United States has led to a domestic energy boom. Currently, water is the only fracturing fluid regularly used in commercial shale oil and gas production. Industry and researchers are interested in non-aqueous working fluids due to their potential to increase production, reduce water requirements, and to minimize environmental impacts. Using a combination of new experimental and modeling data at multiple scales, we analyze the benefits and drawbacks of using CO₂ as a working fluid for shale gas production. We theorize and outline potential advantages of CO₂ including enhanced fracturing and fracture propagation, reduction of flow-blocking mechanisms, increased desorption of methane adsorbed in organic-rich parts of the shale, and a reduction or elimination of the deep re-injection of flow-back water that has been linked to induced seismicity and other environmental concerns. We also examine likely disadvantages including costs and safety issues associated with handling large volumes of supercritical CO₂. The advantages could have a significant impact over time leading to substantially increased gas production. In addition, if CO₂ proves to be an effective fracturing fluid, then shale gas formations could become a major utilization option for carbon sequestration.

03 NATURAL GAS↗

Basic Research Needs for Catalysis Science to Transform Energy Technologies: Report from the U.S. Department of Energy, Office of Basic Energy Sciences Workshop May 8–10, 2017, in Gaithersburg, Maryland

Energy technologies affect virtually every aspect of life in modern societies—including transportation, utilities, agriculture, medicine, and the availability of a myriad of consumer products—and depend on human ability to accelerate and to guide chemical transformations. Controlling these transformations, which occur in the microscopic world of atoms and molecules, forms the basis of countless technologies such as production of fuels, fertilizers, plastics, pharmaceuticals and much more. At the very core of these chemical transformations are catalysts—specialized and often highly complex types of matter that allow chemical reactions to occur rapidly and produce specific products. Catalysts also have the remarkable ability to perform their tasks millions of times without themselves being consumed. The discovery of inexpensive and widely-deployable energy and chemical technologies, and their underpinning catalysis science, is critical to ensure the economic viability of U.S. energy and chemical industries. Over the past decade, remarkable new tools have been discovered that allow the observation of catalytic transformations in exquisite detail, and assembly of novel and elaborate catalytic architectures with atomic precision. Furthermore, increasingly sophisticated theoretical and computational tools allow understanding of the essential details of the catalytic processes, and this overall progress has led to the discovery of catalysts with superior performance and the associated economic benefit. In the next decade and beyond, science promises to revolutionize how catalysts and catalytic processes are designed, to enable the introduction of new energy resources, to provide routes to sustainable synthesis of chemicals and other valuable materials, and to create novel approaches to chemical energy storage. This report is the result of the Basic Energy Sciences Workshop on Basic Research Needs for Catalysis Science to Transform Energy Technologies that was held in May 2017, and was attended by more than 100 leading national and international scientific experts. The attendees were organized into four panels: 1. Diversified Energy Feedstocks and Carriers, 2. Novel Approaches to Energy Transformations, 3. Advanced Chemical Conversion Approaches, and 4. Crosscutting Capabilities and Challenges: Synthesis, Theory, and Characterization. The workshop identified five priority research directions (PRDs) that are aimed at harnessing complexity in catalysis to create next-generation energy technologies and realizing efficient catalytic processes to increase the diversity of resources for production of chemicals and energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The challenge of improvised explosives

Energetic materials have been developed for decades, and indeed centuries, with a common set of goals in mind. Performance (as a detonating explosive, a propellant, or a pyrotechnic) has always been key, equally important have been the attributes of safety, stability, and reproducibility. Research and development with those goals has led to the set of energetic materials commonly used today. In the past few decades, the adoption and use of improvised explosives in attacks by terrorists or third-world parties has led to many questions about these materials, e.g., how they may be made, what threat they pose to the intended target, how to handle them safely, and how to detect them. The unfortunate advent of improvised explosives has opened the door for research into these materials, and there are active programs in many countries. I will discuss issues and opportunities facing research into improvised explosives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isolation and Characterization of Cellulose Micro/Nanofibrils from Douglas Fir

Cellulose micro/nanofibrils were successfully extracted from softwood Douglas fir in three distinct stages. Initially raw Douglas fir wood chips were subjected to a hot water extraction (HWE) treatment. Then HWE treated cellulosic fibers underwent a bleaching process followed by a mild ultrasonication. Chemical composition analysis according to ASTM standards confirmed that most of hemicelluloses and nearly all lignin were removed during the first two stages, respectively. Microscopy studies showed formation of nanofibrils during the ultrasonication process, and increasing ultrasonication time led to generation of greater percentage of nanofibrils. With the removal of the matrix materials, the crystallinity of the cellulosic fibers was increased, whereas thermal stability was maintained. HWE opened up the cell wall structure, thereby facilitating the subsequent fractionation into micro/nanofibrils. The obtained cellulose micro/nanofibrils could serve as reinforcing material in composite products or raw material for other applications, such as filtration membrane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-precipitation of yttrium and barium fluorides from aqueous solutions

Highlights: ► BaF{sub 2}–YF{sub 3} system has been studied under the non-equilibrium ambient conditions. ► Ba{sub 1−x}Y{sub x}F{sub 2+x} (x = 0.35–0.75) solid solution phase has cubic fluorite-type structure. ► Ba{sub 1−x}Y{sub x}F{sub 2+x} cubic crystal lattice parameter a{sub 0} does not change monotonously. ► Different types of lattice defects determine a dependency from sample composition. ► (H{sub 3}O{sup +})Y{sub 3}F{sub 10}{sup −}·nH{sub 2}O phase precipitates from HF aqueous solutions instead of YF{sub 3}·nH{sub 2}O. -- Abstract: Co-precipitation of barium and yttrium fluorides from aqueous solutions at room temperature produced non-equilibrium Ba{sub 1−x}Y{sub x}F{sub 2+x} nanofluoride phase with face-centered cubic crystal lattice of fluorite-type with the composition interval of the homogeneity for x = 0.35–0.75. Lattice parameter a of this solid solution nanophase varied as a function of the sample chemical composition in a complex manner with two areas of linear dependency, from x = 0.35 to 0.45 and from x = 0.50 to 0.75. A plausible explanation of this phenomenon included a change of the type of crystal lattice defects and the manner of their population with the corresponding ions. An increase of the relative amount of yttrium in the HF reaction system led to the formation of hydroxonium salt of decafluorotriyttrium acid, (H{sub 3}O{sup +})Y{sub 3}F{sub 10}{sup −}·nH{sub 2}O, instead of expected YF{sub 3} hydrate. No formation of oxyfluoride phases under acidic conditions has been observed.

36 MATERIALS SCIENCE↗

Induction of necrosis via mitochondrial targeting of Melon necrotic spot virus replication protein p29 by its second transmembrane domain

The virulence factor of Melon necrotic spot virus (MNSV), a virus that induces systemic necrotic spot disease on melon plants, was investigated. When the replication protein p29 was expressed in N. benthamiana using a Cucumber mosaic virus vector, necrotic spots appeared on the leaf tissue. Transmission electron microscopy revealed abnormal mitochondrial aggregation in these tissues. Fractionation of tissues expressing p29 and confocal imaging using GFP-tagged p29 revealed that p29 associated with the mitochondrial membrane as an integral membrane protein. Expression analysis of p29 deletion fragments and prediction of hydrophobic transmembrane domains (TMDs) in p29 showed that deletion of the second putative TMD from p29 led to deficiencies in both the mitochondrial localization and virulence of p29. Taken together, these results indicated that MNSV p29 interacts with the mitochondrial membrane and that p29 may be a virulence factor causing the observed necrosis.

60 APPLIED LIFE SCIENCES↗

The darkening of zinc yellow: XANES speciation of chromium in artist;s paints after light and chemical exposures

The color darkening of selected brushstrokes of the masterpiece A Sunday on La Grande Jatte - 1884 (by Georges Seurat) has been attributed to the alteration of the chromate pigment zinc yellow. The pigment originally displays a bright greenish-yellow color but may undergo, after aging, darkening to a dull, ocher tone. We used XANES to probe the oxidation state of Cr on paint reconstructions, and show that color changes are associated with the reduction of Cr(VI) to Cr(III). Paint mixtures containing the pigment and linseed oil to mimic mixtures used in La Grande Jatte were subjected to artificial aging in the presence of light, SO{sub 2}, and variable air humidity - 50 and 90% relative humidity. High relative humidity led to the largest degree of Cr(VI) reduction whereas low relative humidity promoted light-induced alterations. These results are corroborated by visible reflectance measurements on the same laboratory samples and contribute to a better understanding of the chemical reactivity of chromate pigments, which are present in many historical works of art.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Editors’ Choice—Ionomer Side Chain Length and Equivalent Weight Impact on High Current Density Transport Resistances in PEMFC Cathodes

Cell voltage at high current densities (HCD) of an operating proton-exchange membrane fuel cell (PEMFC) suffers from losses due to the local-O 2 and bulk-H + transport resistances in the cathode catalyst layer (CCL). Particularly, the interaction of perfluorosulfonic acid (PFSA) ionomer with the carbon supported platinum catalyst plays a critical role in controlling reactant transport to the active site. In this study, we perform a systematic analysis of the side chain length and equivalent weight (EW) of PFSA ionomers on the CCL transport resistances. Ex situ measurements were carried out to quantify the ionomer characteristics such as the molecular weight, proton conductivity and water uptake. Nanomorphology of ionomers cast as 60–120 nm thin-films is characterized using grazing-incidence X-ray scattering. In situ fuel cell electrochemical diagnostic measurements were carried out to quantify the reactant (H + /O 2 ) transport properties of the CCL. Ionomer EW was found to play a major role with decreasing EW yielding higher proton conductivity and water uptake that led to lower bulk-H + and local-O 2 transport resistances in the CCL. Finally, a 1D-semi-empirical performance model has been developed to quantify the impact of ionomer EW on cell voltage loss factors.

08 HYDROGEN↗