Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Models, Structural”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Effect of pH on Amorphous Calcium Carbonate Structure and Transformation

A number of organisms produce crystalline calcium carbonate via a metastable precursor phase termed amorphous calcium carbonate (ACC). ACC also forms during production of CaCO 3 for industrial purposes, e.g., paper manufacturing and synthesis of fillers for polymers. Previous studies suggest that the local structure of ACC controls crystallization kinetics and pathways, i.e., the crystalline polymorph(s) that form(s) in the process. We used pair distribution function (PDF) analysis to provide evidence that the local structure of ACC gradually changes as the pH of the synthesis solutions is increased from 10.6 to 12.7, at ambient conditions. Here, these changes correlate with the mole fraction of incorporated hydroxide ions, which varies gradually from negligible at pH 10.6 to 0.12 at pH 12.7. At lower pH (10.5), vaterite and calcite formed in less than 2 min, but as the pH increased, the lifetime of ACC increased, and it transformed directly to calcite (i.e., no vaterite intermediate). Although higher pH led to a preferable transformation into calcite with decreasing crystal size, variations in ACC local structure cannot be linked to development of a calcite like motif, as has been suggested. On the basis of comparing the measured vaterite PDF to a range of structural models to determine Ca–Ca distances, we found no obvious structural similarity between vaterite and the ACC precursor either, although such analysis is complicated by the ambiguity of the vaterite structure. Presumably, the absence of vaterite and the prolonged ACC stability with increasing synthesis pH could indicate inhibition of crystal nucleation and growth by hydroxide ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Expression of divergent methyl/alkyl coenzyme M reductases from uncultured archaea

Abstract Methanogens and anaerobic methane-oxidizing archaea (ANME) are important players in the global carbon cycle. Methyl-coenzyme M reductase (MCR) is a key enzyme in methane metabolism, catalyzing the last step in methanogenesis and the first step in anaerobic methane oxidation. Divergent mcr and mcr -like genes have recently been identified in uncultured archaeal lineages. However, the assembly and biochemistry of MCRs from uncultured archaea remain largely unknown. Here we present an approach to study MCRs from uncultured archaea by heterologous expression in a methanogen, Methanococcus maripaludis . Promoter, operon structure, and temperature were important determinants for MCR production. Both recombinant methanococcal and ANME-2 MCR assembled with the host MCR forming hybrid complexes, whereas tested ANME-1 MCR and ethyl-coenzyme M reductase only formed homogenous complexes. Together with structural modeling, this suggests that ANME-2 and methanogen MCRs are structurally similar and their reaction directions are likely regulated by thermodynamics rather than intrinsic structural differences.

59 BASIC BIOLOGICAL SCIENCES↗

Ab initio calculations of the optical properties of crystalline and liquid InSb

Ab initio calculations of the electronic and optical properties of InSb were performed for both the crystalline and liquid states. Two sets of atomic structure models for liquid InSb at 900 K were obtained by ab initio molecular dynamics simulations. To reduce the effect of structural peculiarities in the liquid models, an averaging of the two sets of the calculated electronic and optical properties corresponding to the two liquid models was performed. The calculated results indicate that, owing to the phase transition from crystal to liquid, the density of states around the Fermi level increases. As a result, the energy band gap opening near the Fermi level disappears. Consequently, the optical properties change from semiconductor to metallic behavior. Namely, owing to the melting of InSb, the interband transition peaks disappear and a Drude-like dispersion is observed in the optical dielectric functions. The optical absorption at a photon energy of 3.06 eV, which is used in Blu-ray Disc systems, increases owing to the melting of InSb. This increase in optical absorption is proposed to result from the increased optical transitions below 2 eV.

36 MATERIALS SCIENCE↗

APSIDAL MOTION OF THE MASSIVE, BENCHMARK ECLIPSING BINARY V578 Mon

V578 Mon is a system of two early B-type stars in the Rosette Nebula star-forming region (NGC 2244) and is one of only nine eclipsing binaries with component masses greater than 10 M{sub sun} whose physical parameters have been determined with an accuracy of better than 3%. It is therefore a benchmark system for evolutionary and stellar structure models of newly formed massive stars. Combining our multi-band light curves spanning 40 yr with previous light curve data from the literature, we fit a model light curve that for the first time includes the effects of apsidal motion of the system. We measure an apsidal period of 33.48{sup +0.10}{sub -0.06} yr. As a consequence of incorporating the apsidal motion into the modeling of the system's orbital parameters, we determine an updated eccentricity of e = 0.07755{sup +0.00022}{sub -0.00027}, which differs significantly from the value previously reported in the literature. Evidently, the inclusion of apsidal motion in the light curve modeling significantly affects the eccentricity determination. Incorporating these key parameters into a comprehensive model of the system's physical parameters-including internal structure constraints-will bring V578 Mon to the next level of benchmark precision and utility.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural origin of recovered ferroelectricity in BaTi O 3 nanoparticles

Nanoscale BaTiO 3 particles (≈10 nm) prepared by ball-milling a mixture of oleic acid and heptane have been reported to have an electric polarization several times larger than that for bulk BaTiO 3 . In this work, detailed local, intermediate, and long-range structural studies are combined with spectroscopic measurements to develop a model structure of these materials. The X-ray spectroscopic measurements reveal large Ti off-centering as the key factor producing the large spontaneous polarization in the nanoparticles. Temperature-dependent lattice parameter changes reveal the sharpening of the structural phase transitions in these BaTiO 3 nanoparticles compared to the pure nanoparticle systems. In conclusion, sharp crystalline-type peaks in the barium oleate Raman spectra suggest that this component in the composite core-shell matrix, a product of mechanochemical synthesis, stabilizes an enhanced polar structural phase of the BaTiO 3 core nanoparticles.

36 MATERIALS SCIENCE↗

A dual assault upon turbulence

All known calculation methods incorporate some sort of turbulence model to reduce the infinite hierarchy of equations, under Reynolds' averaging, to a finite set. All such models suffer from a certain ad hoc nature. A dual structure model was developed wherein the turbulence field is, somewhat arbitrarily, decomposed into large eddies which presumably are dominant contributors to the Reynolds' stress and small eddies which feed on the large eddies as these, in turn feed upon the average flow to gain their energy. These concepts have been developed into a dual approach, one extractive and the other predictive as outlined below.

Payne, F. R.↗

On the identification of a highly augmented airplane

The results of applying linear least squares and maximum likelihood estimation procedures to flight data from the AFTI/F-16 airplane are presented. Data from two flight control system modes are analyzed. It is shown that though a simple aerodynamic model structure is adequate for the simple mode, a more complicated model is necessary to adequately describe the highly augmented mode. The effect of augmentation of roll control is shown to be visible in the control parameters.

Batterson, J. G.↗

Parametric uncertainty modeling for application to robust control

Viewgraphs and a paper on parametric uncertainty modeling for application to robust control are included. Advanced robust control system analysis and design is based on the availability of an uncertainty description which separates the uncertain system elements from the nominal system. Although this modeling structure is relatively straightforward to obtain for multiple unstructured uncertainties modeled throughout the system, it is difficult to formulate for many problems involving real parameter variations. Furthermore, it is difficult to ensure that the uncertainty model is formulated such that the dimension of the resulting model is minimal. A procedure for obtaining an uncertainty model for real uncertain parameter problems in which the uncertain parameters can be represented in a multilinear form is presented. Furthermore, the procedure is formulated such that the resulting uncertainty model is minimal (or near minimal) relative to a given state space realization of the system. The approach is demonstrated for a multivariable third-order example problem having four uncertain parameters.

Belcastro, Christine M.↗

Flutter analysis of a supersonic cascade in time domain using an ADI Euler solver

The aeroelastic stability of a two-dimensional cascade oscillating in supersonic axial flow is analyzed in the time domain. The aeroelastic model consists of a single degree of freedom typical section structural model for each blade of the cascade and an unsteady two-dimensional cascade aerodynamic model based on the Euler equations. The Euler equations are solved using a time accurate Alternating Direction Implicit (ADI) solution scheme. The aeroelastic equations are integrated in time. The effect of interblade phase angle is included in the aeroelastic analysis by an appropriate choice of initial and boundary conditions. Flutter predictions are obtained from the time response of a flat plate cascade in single degree of freedom pitching motion. The results correlate well with those obtained from a separate frequency domain flutter analysis for all values of interblade phase angles considered. Flutter results are then presented for cascades having airfoil sections representative of a supersonic throughflow fan. The validity of the time integration method for a cascade of airfoils at various interblade phase angles is demonstrated.

Reddy, T. S. R.↗

Reduced-Order Aerodynamic Model and Its Application to a Nonlinear Aeroelastic System

Starting from a finite state model for a two-dimensional aerodynamic flow over an airfoil, the eigenmodes of the aerodynamic flow are determined. Using a small number of these aerodynamic eigenmodes, ie., a reduced-order model, the aeroelastic model is formed by coupling them to a typical section structural model with a trailing-edge flap. A free-play nonlinearity is modeled. Results are shown from the finite state model, the reduced-order model, and previous theoretical and experimental work. All results are in good agreement.

Tang, Deman↗

Demonstrating the Power of Chandra High Resolution Spectroscopy Plasma Diagnostics

The Chandra spectrometers can resolve spectroscopic features that can be used to diagnose the state of emitting plasma. Based on high resolution Chandra High Energy Transmission Grating (HETG) calibration observations of the active RS CVn-type Binary V711 Tau (HR1099), we determine for the first time the plasma density at a range of coronal temperatures for this type of object. The results are used to constrain coronal structural models and build a picture of the change in coronal structure from stars of solar-like activity to the most active RS CVn-type binaries.

Drake, Jeremy↗

Assessing Videogrammetry for Static Aeroelastic Testing of a Wind-Tunnel Model

The Videogrammetric Model Deformation (VMD) technique, developed at NASA Langley Research Center, was recently used to measure displacements and local surface angle changes on a static aeroelastic wind-tunnel model. The results were assessed for consistency, accuracy and usefulness. Vertical displacement measurements and surface angular deflections (derived from vertical displacements) taken at no-wind/no-load conditions were analyzed. For accuracy assessment, angular measurements were compared to those from a highly accurate accelerometer. Shewhart's Variables Control Charts were used in the assessment of consistency and uncertainty. Some bad data points were discovered, and it is shown that the measurement results at certain targets were more consistent than at other targets. Physical explanations for this lack of consistency have not been determined. However, overall the measurements were sufficiently accurate to be very useful in monitoring wind-tunnel model aeroelastic deformation and determining flexible stability and control derivatives. After a structural model component failed during a highly loaded condition, analysis of VMD data clearly indicated progressive structural deterioration as the wind-tunnel condition where failure occurred was approached. As a result, subsequent testing successfully incorporated near- real-time monitoring of VMD data in order to ensure structural integrity. The potential for higher levels of consistency and accuracy through the use of statistical quality control practices are discussed and recommended for future applications.

Spain, Charles V.↗

Development and Implementation of Efficiency-Improving Analysis Methods for the SAGE III on ISS Thermal Model Originating

The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument is the fifth in a series of instruments developed for monitoring aerosols and gaseous constituents in the stratosphere and troposphere. SAGE III will be delivered to the International Space Station (ISS) via the SpaceX Dragon vehicle in 2015. A detailed thermal model of the SAGE III payload has been developed in Thermal Desktop (TD). Several novel methods have been implemented to facilitate efficient payload-level thermal analysis, including the use of a design of experiments (DOE) methodology to determine the worst-case orbits for SAGE III while on ISS, use of TD assemblies to move payloads from the Dragon trunk to the Enhanced Operational Transfer Platform (EOTP) to its final home on the Expedite the Processing of Experiments to Space Station (ExPRESS) Logistics Carrier (ELC)-4, incorporation of older models in varying unit sets, ability to change units easily (including hardcoded logic blocks), case-based logic to facilitate activating heaters and active elements for varying scenarios within a single model, incorporation of several coordinate frames to easily map to structural models with differing geometries and locations, and streamlined results processing using an Excel-based text file plotter developed in-house at LaRC. This document presents an overview of the SAGE III thermal model and describes the development and implementation of these efficiency-improving analysis methods.

Liles, Kaitlin↗

Remote sensing-based vegetation and soil moisture constraints reduce irrigation estimation uncertainty

Understanding the human water footprint and its impact on the hydrological cycle is essential to inform water management under climate change. Despite efforts in estimating irrigation water withdrawals in earth system models, uncertainties and discrepancies exist within and across modeling systems conditioned by model structure, irrigation parameterization, and the choice of input datasets. Achieving model reliability could be much more challenging for data-sparse regions, given limited access to ground truth for parameterization and validation. Here, we demonstrate the potential of utilizing remotely sensed vegetation and soil moisture observations in constraining irrigation estimation in the Noah-MP land surface model. Results indicate that the two constraints together can effectively reduce model sensitivity to the choice of irrigation parameterization by 7%–43%. It also improves the characterization of the spatial patterns of irrigation and its impact on evapotranspiration and surface soil moisture by correcting for vegetation conditions and irrigation timing. This study highlights the importance of utilizing remotely sensed soil moisture and vegetation measurements in detecting irrigation signals and correcting for vegetation growth. Integrating the two remote sensing datasets into the model provides an effective and less feature engineered approach to constraining the uncertainty of irrigation modeling. Such strategies can be potentially transferred to other modeling systems and applied to regions across the globe.

Wanshu Nie↗

A simplified regression building thermal modelling method for detached two-floor house in U.S.

The residential building sector accounts for approximately 37% of total U.S. electricity consumption. Within the residential building sector, heating and cooling is the main target for peak load shifting/reduction since it is the largest contributor to peak demand. In fact, the flexibility of residential HVAC loads can provide continuous variation of demand to provide grid services by varying their demand over a baseline. The performance of HVAC load control to provide grid services relies heavily on the accuracy of indoor air temperature or cooling/heating demand predictions and therefore the quality of building model. Besides forward models, popular building models are data-driven models which can be broken down into two categories: gray-box model, e.g. Resistance-Capacitance (RC) model and black-box model. RC model, also called lumped capacitance or network model, which is constituted with electrical analogue pattern with resistance (R) and capacitance (C). In general, RC models require considerable computation burden and long periods of data to train limited number of model coefficients. Black-box models have gained increasing interest due to their capability in analyzing large-scale data and flexibility in practical applications. But, the data-mining based (machine learning algorithms/techniques based) models tend to have invisible model structures which poses a problem when trying to use the model for optimal control or model predictive control of the HVAC system. Hence, there is a continuing need for efficient online system identification techniques, which can provide explicit parameters for the model. Traditional regression models fit well for this specific purpose. This paper presents an innovative way to predict average indoor temperature in separate floors of typical detached residential house. A rolling horizon linear regression model, which includes online adaptive correction component, is proposed to predict the temperature difference between downstairs and upstairs. A RC model is used to predict the overall mean indoor air temperature. Since the adaptive algorithm needs to be implemented online, a less computation-demanding polynomial fitting algorithm is adopted. This kind of fitting problem can be cast as linear regression problem with multiple variables, parameters of which can be efficiently obtained by well-known gradient descent method.The validation is conducted by comparing the predicted results with the results from data-mining based models as well as measured data from a real typical detached two-floor house. The results show that the developed method has satisfactory performance in predicting the building indoor temperature in 1st and 2nd floors.

Cui, Borui↗

Conditional random fields for pattern recognition applied to structured data

Pattern recognition uses measurements from an input domain, X, to predict their labels from an output domain, Y. Image analysis is one setting where one might want to infer whether a pixel patch contains an object that is “manmade” (such as a building) or “natural” (such as a tree). Suppose the label for a pixel patch is “manmade”; if the label for a nearby pixel patch is then more likely to be “manmade” there is structure in the output domain that can be exploited to improve pattern recognition performance. Modeling P(X) is difficult because features between parts of the model are often correlated. Therefore, conditional random fields (CRFs) model structured data using the conditional distribution P(Y|X = x), without specifying a model for P(X), and are well suited for applications with dependent features. This paper has two parts. First, we overview CRFs and their application to pattern recognition in structured problems. Our primary examples are image analysis applications in which there is dependence among samples (pixel patches) in the output domain. Second, we identify research topics and present numerical examples.

97 MATHEMATICS AND COMPUTING↗

LiZnNb{sub 4}O{sub 11.5}: A novel oxygen deficient compound in the Nb-rich part of the Li{sub 2}O-ZnO-Nb{sub 2}O{sub 5} system

A novel lithium zinc niobium oxide LiZnNb{sub 4}O{sub 11.5} (LZNO) has been found in the Nb-rich part of Li{sub 2}O-ZnO-Nb{sub 2}O{sub 5} system. LZNO, with an original alpha-PbO{sub 2} related structure, has been synthesized by the routine ceramic technique and characterized by X-ray diffraction and transmission electron microscopy (TEM). Reflections belonging to the LZNO phase, observed in X-ray powder diffraction (XRPD) and electron diffraction, have been indexed as monoclinic with unit cell parameters a=17.8358(9) A, b=15.2924(7) A, c=5.0363(3) A and gamma=96.607(5){sup o} or as alpha-PbO{sub 2}-like with lattice constants a=4.72420(3) A, b=5.72780(3) A, c=5.03320(3) A, gamma=90.048(16){sup o} and modulation vector q=0.3a*+1.1b* indicating a commensurately modulated alpha-PbO{sub 2} related structure. The monoclinic cell is a supercell related to the latter. Using synchrotron powder diffraction data, the structure has been solved and refined as a commensurate modulation (superspace group P112{sub 1}/n(alphabeta0)00) as well as a supercell (space group P2{sub 1}/b). The superspace description allows us to consider the LZNO structure as a member of the proposed alpha-PbO{sub 2}-Z (3+1)D structure type, which unifies both incommensurately and commensurately modulated structures. HRTEM reveals several types of defects in LZNO and structural models for these defects are proposed. Two new phases in Li{sub 2}O-ZnO-Nb{sub 2}O{sub 5} system are predicted on the basis of this detailed HRTEM analysis. - Graphical abstract: LiZnNb{sub 4}O{sub 11.5} with an original alpha-PbO{sub 2} related structure has been found in the Nb-rich part of Li{sub 2}O-ZnO-Nb2O5 system and characterized by X-ray diffraction and transition electron microscopy (TEM). Using synchrotron powder diffraction data, the structure has been solved and refined by means of both commensurate modulation and supercell models.

36 MATERIALS SCIENCE↗

Computational structures technology

Computational structures technology (CST), which has emerged from FEM developments, is a fusion of materials modeling, structural and dynamic analysis and synthesis methods, on the one hand, and numerical analysis and approximation theory, on the other. In addition to computational materials modeling, CST encompasses computational methods for predicting the response, performance, failure, and service life of structures and their components, as well as automated methods for structural synthesis and optimization.

Noor, Ahmed K.↗