Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Microwave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Microwave observations of solar and stellar coronae

Recent high-resolution microwave observations of the coronae of the sun and nearby active stars are summarized. Simultaneous VLA-SMM observations of coronal loops are discussed for which the microwave and soft X-ray data were combined to specify the radiation mechanisms of the emitting plasma. Observations of quiescent and burst emission from the sun at 90 cm are discussed, and the results of a recent VLA survey of active stars are presented. Observations of narrow-band burst emission that provide evidence for nonthermal, coherent emission processes in stellar coronae are discussed.

Willson, Robert F.↗

The ratio of microwaves to X-rays in solar flares - The case for the thick-target model

The expected ratio of synchrotron microwave radiation to bremsstrahlung X-rays for thick target, thin target, and multithermal solar flare models is calculated. The calculations take into account the variation of the microwave to X-ray ratio with X-ray spectral index. The theoretical results are compared with observed ratios of a sample of 51 solar flares with well known spectral index. From this it is concluded that the nonthermal thick target model with a loop length of and order of 10 to the 9th power cm and a magnetic field of 500 + or - 200 G provides the best fit to the data. The thin target and multithermal models require unreasonably large density or pressure and/or low magnetic field to match the data.

Lu, Edward T.↗

Phase and amplitude characteristics of InP:Fe modified interdigitated gap photoconductive microwave switches

The transmission amplitude and phase characteristics of InP:Fe modified interdigitated gap photoconductive microwave switches are reported. Measurements in the 0.1-1 GHz frequency range show that the phase is shifted about 90 deg and that the corresponding change in amplitude ranges from 43 dB at 0.1 GHz to 23 dB at 1 GHz when the illumination-induced conductance is switched from a low OFF-state value (aboit 4 x 10 to the -8 S) to a high ON-state value (5 mS). The observed characteristics can be described by a phase-shifting region and an amplitude modulation region. In the phase-shifting region the phase strongly depends on the conductance, and the amplitude is almost constant. In the amplitude modulation region both the amplitude and the phase depend on the conductance but the effect on the amplitude is much more pronounced. A lumped-element model describing the device performance is presented. It is concluded that these optoelectronic microwave switching devices are suitable for high-speed amplitude modulation but are not promising as high-speed phase shifters.

Andersson, Ingmar L.↗

The microwave spectra of the asteroids Pallas, Vesta, and Hygiea

Microwave observations of Pallas, Vesta, and Hygiea at 2 and 6 cm wavelength yield brightness temperatures that are much lower than would be expected for a rapidly rotating blackbody. An analysis of the wavelength dependence of the observed brightness temperatures shows that, as was found for Ceres, these asteroids may be covered by a layer of material with the physical properties of finely divided dust. Models with layer depths of greater than 6 cm (Pallas), 6 cm (Vesta), and 8 cm (Hygiea) were found to represent well the variation in emissivity at radio wavelengths. The properties of the underlying layer are not well constrained by the microwave observations. It does appear that the real part of the dielectric vector for the substrate is similar to that of basaltic rock. Major compositional changes, if any, must take place at depths greater than about 10 cm. No evidence for water ice was found. Disk-resolved observations of the 2-cm emission of Vesta yield physical dimensions consistent with the recently published speckle-interferometry results.

Johnston, K. J.↗

Passive microwave sensing of the atmosphere

The development of microwave instrumetns to sound the atmosphere is reveiwed, focusing on the Advanced Microwave Sounding Unit (AMSU). The AMSU is planned for operation in a geosynchronous orbit or in LEO near 118 GHz. The three main AMSU subsystems are described: a 15-channel temperature sounder with a 50-km resolution, a 5-channel atmospheric moisture sounder with a 15-km resolution, and a 7-channel stratospheric and mesospheric temperature sounder with 150-km resolution. In addition, the potential for limb-sounding instruments is considered.

Staelin, David H.↗

Passive microwave in situ observations of winter Weddell Sea ice

Results are presented on the microwave radiative characteristics of Antarctic sea ice measured during the 1986 Winter Weddell Sea Project with a set of portable radiometers. Radiometer measurements at 6, 10, 18, 37, and 90 GHz in vertical and horizontal polarizations were supplemented by near-simultaneous measurements of the ice physical characteristics (including ice thickness, salinity, temperature, snow cover, and density) made during two cruises, lasting 3 months each. Measurements were obtained on various types of sea ice over a large portion of the Weddell-Sea ice cover, including four transects across the entire ice pack. Data analysis shows a large variability in the multispectral microwave emissivities of different ice types, especially at 90 GHz, demonstrating a strong potential of the use of the 90-GHz channel, in combination with lower-frequency channels, for detailed characterizations of the ice cover.

Comiso, J. C.↗

High-resolution microwave spectra of solar bursts

A phenomenological and statistical study of flares observed in total power with the frequency-agile interferometer at the Owens Valley Radio Observatory during several months of high solar activity in 1981 is reported. Roughly 80 percent of the events have a complex spectrum consisting of more than one spectral component, implying that the microwave radiation of a burst usually does not come from a single homogeneous source. The presence of more than one component can lead to significant errors when data with low spectral resolution are used to determine the low-side spectral index. The low-frequency slope of a single spectra component is often steeper than expected, and the peak frequency stays nearly constant throughout a microwave event.

Stahli, M.↗

Testing Microwave Landing Systems With Satellite Navigation

Less time and equipment needed to perform tests. Satellite-based Global Positioning System (GPS) measures accuracy of microwave scanning-beam landing system (MSBLS) at airports used to support Shuttle landings. Provides time and three-dimensional information on position and velocity with unprecedented accuracy. Useful for testing other electronic navigation aids like LORAN, TACAN and microwave landing systems (MLS).

Kiriazes, John J.↗

Laboratory evaluation and application of microwave absorption properties under simulated conditions for planetary atmospheres

Radio absorptivity data for planetary atmospheres obtained from spacecraft radio occultation experiments and earth-based radio astronomical observations can be used to infer abundances of microwave absorbing atmospheric constituents in those atmospheres, as long as reliable information regarding the microwave absorbing properties of potential constituents is available. Work performed has shown that laboratory measurements of the millimeter-wave opacity of ammonia between 7.5 mm and 9.3 mm and also at the 3.2 mm wavelength require a different lineshape to be used in the theoretical prediction for millimeter-wave ammonia opacity than was previously used. The recognition of the need to make such laboratory measurements of simulated planetary atmospheres over a range of temperatures and pressures which correspond to the altitudes probed by both radio occultation experiments and radio astronomical observations, and over a range of frequencies which correspond to those used in both radio occultation experiments and radio astronomical observations, has led to the development of a facility at Georgia Tech which is capable of making such measurements. It has been the goal of this investigation to conduct such measurements and to apply the results to a wide range of planetary observations, both spacecraft and earth-based, in order to determine the identity and abundance profiles of constituents in those planetary atmospheres.

Steffes, Paul G.↗

High resolution spectroscopy in the microwave and far infrared

High resolution rotational spectroscopy has long been central to remote sensing techniques in atmospheric sciences and astronomy. As such, laboratory measurements must supply the required data to make direct interpretation of data for instruments which sense atmospheres using rotational spectra. Spectral measurements in the microwave and far infrared regions are also very powerful tools when combined with infrared measurements for characterizing the rotational structure of vibrational spectra. In the past decade new techniques were developed which have pushed high resolution spectroscopy into the wavelength region between 25 micrometers and 2 mm. Techniques to be described include: (1) harmonic generation of microwave sources, (2) infrared laser difference frequency generation, (3) laser sideband generation, and (4) ultrahigh resolution interferometers.

Pickett, Herbert M.↗

Laboratory measurements and modeling of microwave absorption by ammonia in gas mixtures applicable to giant planet atmospheres

Accurate knowledge of the microwave absorption behavior of ammonia is critical to the correct interpretation of radio astronomical and radio occultation data from the giant planets. New cavity resonator techniques developed at the Stanford Center for Radar Astronomy have allowed accurate laboratory measurements of the microwave absorptivity and refractivity spectra of gas mixtures containing trace amounts of ammonia. A parameterized version of the modified Ben-Reuven formalism of Berge and Bulkis was optimized to fit the new data. The new formalism produced by this method predicts ammonia absorptivity much more accurately than previous formalism over a significant range of conditions.

Spilker, T. R.↗

Thermal-distortion analysis of an antenna strongback for geostationary high-frequency microwave applications

The global change technology initiative calls for a geostationary platform for Earth science monitoring. One of the major science instruments is the high frequency microwave sounder (HFMS) which uses a large diameter, high resolution, high frequency microwave antenna. This antenna's size and required accuracy dictates the need for a segmented reflector. On-orbit disturbances may be a significant factor in its design. A study was performed to examine the effects of the geosynchronous thermal environment on the performance of the strongback structure for a proposed antenna concept for this application. The study included definition of the strongback and a corresponding numerical model to be used in the thermal and structural analyses definition of the thermal environment, determination of structural element temperature throughout potential orbits, estimation of resulting thermal distortions, and assessment of the structure's capability to meet surface accuracy requirements. Analyses show that shadows produced by the antenna reflector surface play a major role in increasing thermal distortions. Through customization of surface coating and element expansion characteristics, the segmented reflector concept can meet the tight surface accuracy requirements.

Farmer, Jeffrey T.↗

Laser ablated high T(sub c) superconducting thin YBa2Cu3O(7-x) films on substrates suitable for microwave applications

The development of high temperature superconducting YBa2Cu3O(7-x) thin films on substrates suitable for microwave applications is of great interest for evaluating their applications for space radar, communication, and sensor systems. Thin films of YBa2Cu3O(7-x) were formed on SrTiO3, ZrO2, MgO, and LaAlO3 substrates by laser ablation. The wavelength used was 248 nm from a KrF excimer laser. During deposition the films were heated to 600 C in a flowing oxygen environment, and required no post annealing. The low substrate temperature during deposition with no post annealing gave films which were smooth, which had their c-axis aligned to the substrates, and which had grains ranging from 0.2 to 0.5 microns in size. The films being c-axis aligned gave excellent surface resistance at 35 GHz which was lower than that of copper at 77 K. At present, LaAlO3 substrates with a dielectric constant of 22, appears suitable as a substrate for microwave and electronic applications. The films were characterized by resistance-temperature measurements, scanning electron microscopy, and x ray diffraction. The highest critical transition temperatures (T sub c) are above 89 K for films on SrTiO3 and LaAlO3, above 88 K for ZrO2, and above 86 K for MgO. The critical current density (J sub c) of the films on SrTiO3 is above 2 x 10(exp 6) amperes/sq cm at 77 K. The T(sub c) and J(sub c) are reported as a function of laser power, composition of the substrate, and temperature of the substrate during deposition.

Warner, J. D.↗

Optical and microwave detection using Bi-Sr-Ca-Cu-O thin films

Recent progress at the Johns Hopkins University Applied Physics Laboratory (JHU/APL) in the development of optical and microwave detectors using high temperature superconducting thin films is described. Several objectives of this work have been accomplished, including: deposition of Bi-Sr-Ca-Cu-O thin films by laser abation processing (LAP); development of thin film patterning techniques, including in situ masking, wet chemical etching and laser patterning; measurements of bolometric and non-bolometric signatures in patterned Bi-Sr-Ca-Cu-O films using optical and microwave sources, respectively; analysis and design of an optimized bolometer through computer simulation, and investigation of its use in a Fourier transform spectrometer. The focus here is primarily on results from the measurement of the bolometric and non-bolometric response.

Grabow, B. E.↗

Instrument description of the airborne microwave temperature profiler

The microwave temperature profiler (MTP) is a passive microwave radiometer installed in the NASA ER-2 aircraft and used to measure profiles of air temperature versus altitude. It operates at 57.3 and 58.8 GHz, where oxygen molecules emit thermal radiation. Brightness temperature is measured at a selection of viewing elevation angles every 14 s. MTP was the only remote sensing experiment aboard the ER-2 during the Airborne Antarctic Ozone Experiment. This paper describes hardware, calibration, and performance aspects of the MTP.

Denning, Richard F.↗

The effect of hot gas in early-type galaxies on the cosmic microwave background

The effects on the cosmic microwave background which are due to Compton scattering by the hot gas contained in early-type galaxies (the Sunyaev-Zeldovich effect) are computed. Using the known properties of the gas deduced from X-ray observations, it is found that the fractional attenuation DeltaT/T at the center of a gas-rich galaxy is likely to be less than 10 to the -5th, which is just below current limits of detectability. A distribution function is derived for the attenuation which is due to a population of early-type galaxies out to some redshift and the expected rms fluctuations in the background on subarcmin scales are computed. These fluctuations are comparable to those intrinsic to the microwave background in the 'cold dark matter' scenario on these angular scales, but they fall orders of magnitude below the detection limits and below the level of fluctuations expected from nonlinear density perturbations at the epoch of galaxy formation.

Trester, Jeffrey J.↗

Identification of atmospheric fronts over the ocean with microwave measurements of water vapor and rain

This paper describes some basic research techniques and algorithms developed to diagnose fronts in cyclonic storms over the ocean with data from satellite-borne microwave radiometers. Methods are developed for flagging strong gradients in integrated atmospheric water vapor and the presence of rain by using data from the SSMR on board the polar orbiting Seasat and Nimbus-7 satellites. Examination of 65 frontal systems showed that the water vapor gradient flag correctly identified 86 percent of the fronts, while the precipitation flagged 91 percent. The two types of flags emphasize different portions of the cyclone and are therefore complementary. Ultimately, these techniques are intended for operational use with data from the Special Sensor Microwave Imager which was launched in June 1987 on a satellite in the Defense Meteorological Satellite Program (DMSP).

Katsaros, Kristina B.↗

Radiative transfer to space through a precipitating cloud at multiple microwave frequencies. III - Influence of large ice particles

The time-dependent influence of large ice particles on the brightness temperatures, T(B)s, that would be observed from space above severe thunderstorms is investigated using a vertically and angularly detailed plane-parallel microwave radiative transfer model. The impact of large ice particles on passive microwave T(B)s over an evolving model rain cloud was examined at ten separate frequencies in the EHF/SHF spectrum. It is shown that the frequency-dependent vertically distributed generalized emission/scattering weighting functions, introduced in this simulation to vertically resolve the contributions by individual cloud and precipitation layers to the T(B)s, can be used to identify the specific layers responsible for regulating the magnitude of top-of-atmoshere T(B)s.

Smith, Eric A.↗