Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

The influence of hydrostatic pressure on the magnetic and magnetocaloric properties of DyRu 2 Si 2

In this paper, we report the magnetic and magnetocaloric properties of the tetragonal rare-earth compound DyRu 2 Si 2 under applied hydrostatic pressure. The isothermal entropy change (ΔS) and the adiabatic temperature change (ΔT ad ) were calculated from magnetization data collected at different applied pressures and from heat capacity measurements conducted at atmospheric pressure, respectively. The application of hydrostatic pressure significantly modified the multi-step magnetization curve and the saturation magnetization. A suppression of the magnetization was observed for P = 0.588 GPa and P = 0.654 GPa whereas, at about P ≈1 GPa, the saturation magnetization increased and the magnetization isotherms again resembled the curves measured at atmospheric pressure. A small thermal hysteresis was observed between the heating and cooling M(T) curves at T t =3.4 K, with an applied magnetic field of H = 0.1 T. This thermal hysteresis indicates a first-order like transition which was also supported by the Arrott plot analysis. Finally, the volume magnetostriction was estimated from the pressure-dependent magnetization measurements using a Maxwell relation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Transient structured fluctuations in a two-dimensional system with multiple ordered phases

We report the structure of transient fluctuations in the liquid phase of a two-dimensional system that exhibits several ordered phases with different symmetries. The density-temperature phase diagram of the system studied, composed of particles with a repulsive shouldered soft-core pair interaction, has regions with stable liquid and hexatic phases, a square solid phase, two separate hexagonal solid phases, and a quasi-crystalline phase with 12-fold symmetry. We have examined the character of the structured fluctuations by computing the same-time aperture cross correlation function of particle configurations in several fluid regions near to and far from phase transition lines. The two primary goals of our study are (1) determination if the spectrum of structures of the fluctuations in the liquid is broader than or limited to the motifs exhibited by the ordered phases supported by the system and (2) determination of the density domains in the liquid that support particular transient structured fluctuations. In the system studied, along a low-temperature isotherm in the temperature-density plane that intersects all the ordered phases we find that the liquid phase exhibits structured fluctuations with hexagonal symmetry near both liquid-hexatic transition lines. Along the same isotherm and in the stable liquid between the lower density hexatic-to-liquid and the higher density liquid-to-square solid transitions, we find that transient hexagonal ordered fluctuations dominate the liquid region near the hexatic-to-liquid transition and square ordered fluctuations dominate the liquid region near the liquid-to square solid transition, but both of these structured fluctuations occur at all densities between these transition lines. At a higher temperature, at phase points in the liquid above, but close to the density maximum of an underlying transition, there are ordered fluctuations that can be correlated with the structure of the lower temperature phase. Although it is expected that very close to a liquid-ordered phase boundary a structured fluctuation in the liquid will have the same symmetry as the ordered phase, it is not obvious that structured fluctuations in thermodynamic states deep in the liquid phase will be similarly restricted. The most striking result of our calculations is that no evidence is found in the liquid phase for structured fluctuations with other symmetries than those of the ordered phases of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization growth rates and front propagation in amorphous solid water films

The growth rate of crystalline ice (CI) in amorphous solid water (ASW) films was investigated using reflection absorption infrared spectroscopy. Two different experiments were set up to measure rates of the crystallization front propagation from the underlying crystalline template upward and from the vacuum interface downward. In one set of experiments, layers of ASW (5% D 2 O in H 2 O) were grown on a CI template and capped with a decane layer. In isothermal experiments from 140 to 150 K, crystallization was observed from the onset (no induction time) and the extent of crystallization increased linearly with time. In a second set of experiments, uncapped ASW films without a CI template were studied. The films were created by placing a 100 ML isotopic layer (5% D 2 O in H 2 O) at various positions in a 1000 ML ASW (H 2 O) film. The CI growth rates obtained from the two configurations (capped films with a CI template and uncapped films without a CI template) are in quantitative agreement. The results support the idea that for ASW films in a vacuum, a crystalline layer forms at the surface that then acts as a CI template for a growth front that moves downward into the film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A robust three-parameter reference curve for condensed phase materials

Many isothermal equations of state lead to numerical problems under tension conditions due to negative bulk modulus. We summarize the properties of four existing models and devise a continuous non-piecewise reference curve to address this issue. The final functional form contains three fitting parameters that are directly related to the bulk modulus and its pressure derivative at the reference state and at infinite pressures. We also include bounds that guarantee the monotonicity of its pressure derivative in all volume space. To demonstrate the qualitative features of each isotherm, we conduct calibrations against experimental data for cyclotetramethylene tetranitramine, magnesium oxide, gold, and platinum. Furthermore, pressure residuals and root mean square deviations show that the proposed functional form is capable of adequately fitting the data compared to other three-parameter models.

36 MATERIALS SCIENCE↗

Planar, longitudinal, compressive waves in solids: Thermodynamics and uniaxial strain restrictions

A new tri-axial pressure-based constitutive expression has been found using Cauchy's stress tensor. This stress state emphasizes pressure and shear stress. The description is a pressure plus an effective shear stress allowing for a constitutive law based on atomic solid-state phase changes in crystalline cells due to pressure plus shear-based dislocation motion commonly associated with plasticity. Pressure has a new role in the material's constitutive response as it is separated from plasticity. The thermo-mechanical system describes third-order Gibbs’ expressions without specific volume restrictions placed upon the material. Isothermally, the ratio of heat to shear work in elastic copper is shown to approach zero at a very low temperature and become larger than one as temperature approaches melting. Wave compression models investigated are elastic and plastic: in fully elastic materials, the planar wave is restricted by Poisson's effect although plastic shear changes this constraint. Plastic deformation, dominated by dissipative shear stresses in uniaxial strain, heats the material while excluding phase changes from hydrostatic pressures. The material properties per se across Hugoniot shocks are described with entropy concepts. Shock waves are exceedingly complex since the constitutive laws are linked at extreme temperatures, pressures, and shear stresses. Isothermal, isentropic, isochoric, and iso-shear conditions are used throughout with Jacobian algebra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A glutamate/aspartate switch controls product specificity in a protein arginine methyltransferase

Trypanosoma brucei PRMT7 (TbPRMT7) is a protein arginine methyltransferase (PRMT) that strictly monomethylates various substrates, thus classifying it as a type III PRMT. However, the molecular basis of its unique product specificity has remained elusive. Here, we present the structure of TbPRMT7 in complex with its cofactor product S-adenosyl-L-homocysteine (AdoHcy) at 2.8 Å resolution and identify a glutamate residue critical for its monomethylation behavior. TbPRMT7 comprises the conserved methyltransferase and β-barrel domains, an N-terminal extension, and a dimerization arm. The active site at the interface of the N-terminal extension, methyltransferase, and β-barrel domains is stabilized by the dimerization arm of the neighboring protomer, providing a structural basis for dimerization as a prerequisite for catalytic activity. Mutagenesis of active-site residues highlights the importance of Glu181, the second of the two invariant glutamate residues of the double E loop that coordinate the target arginine in substrate peptides/proteins and that increase its nucleophilicity. Strikingly, mutation of Glu181 to aspartate converts TbPRMT7 into a type I PRMT, producing asymmetric dimethylarginine (ADMA). Isothermal titration calorimetry (ITC) using a histone H4 peptide showed that the Glu181Asp mutant has markedly increased affinity for monomethylated peptide with respect to the WT, suggesting that the enlarged active site can favorably accommodate monomethylated peptide and provide sufficient space for ADMA formation. In conclusion, these findings yield valuable insights into the product specificity and the catalytic mechanism of protein arginine methyltransferases and have important implications for the rational (re)design of PRMTs.

59 BASIC BIOLOGICAL SCIENCES↗

Enhancement and maximum in the isobaric specific-heat capacity measurements of deeply supercooled water using ultrafast calorimetry

Knowledge of the temperature dependence of the isobaric specific heat (C p ) upon deep supercooling can give insights regarding the anomalous properties of water. If a maximum in C p exists at a specific temperature, as in the isothermal compressibility, it would further validate the liquid–liquid critical point model that can explain the anomalous increase in thermodynamic response functions. The challenge is that the relevant temperature range falls in the region where ice crystallization becomes rapid, which has previously excluded experiments. Here, we have utilized a methodology of ultrafast calorimetry by determining the temperature jump from femtosecond X-ray pulses after heating with an infrared laser pulse and with a sufficiently long time delay between the pulses to allow measurements at constant pressure. Evaporative cooling of ~15-µm diameter droplets in vacuum enabled us to reach a temperature down to ~228 K with a small fraction of the droplets remaining unfrozen. We observed a sharp increase in C p , from 88 J/mol/K at 244 K to about 218 J/mol/K at 229 K where a maximum is seen. The C p maximum is at a similar temperature as the maxima of the isothermal compressibility and correlation length. From the C p measurement, we estimated the excess entropy and self-diffusion coefficient of water and these properties decrease rapidly below 235 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Models for the Binary Complex of Bacteriophage T4 Gp59 Helicase Loading Protein. GP32 Single-Stranded DNA-Binding Protein and Ternary Complex with Pseudo-Y Junction DNA

The bacteriophage T4 gp59 helicase assembly protein (gp59) is required for loading of gp41 replicative helicase onto DNA protected by gp32 single-stranded DNA-binding protein. The gp59 protein recognizes branched DNA structures found at replication and recombination sites. Binding of gp32 protein (full-length and deletion constructs) to gp59 protein measured by isothermal titration calorimetry demonstrates that the gp32 protein C-terminal A-domain is essential for protein-protein interaction in the absence of DNA. Sedimentation velocity experiments with gp59 protein and gp32ΔB protein (an N-terminal B-domain deletion) show that these proteins are monomers but form a 1:1 complex with a dissociation constant comparable with that determined by isothermal titration calorimetry. Small angle x-ray scattering (SAXS) studies indicate that the gp59 protein is a prolate monomer, consistent with the crystal structure and hydrodynamic properties determined from sedimentation velocity experiments. SAXS experiments also demonstrate that gp32ΔB protein is a prolate monomer with an elongated A-domain protruding from the core. Moreover, fitting structures of gp59 protein and the gp32 core into the SAXS-derived molecular envelope supports a model for the gp59 protein-gp32ΔB protein complex. Our earlier work demonstrated that gp59 protein attracts full-length gp32 protein to pseudo-Y junctions. A model of the gp59 protein-DNA complex, modified to accommodate new SAXS data for the binary complex together with mutational analysis of gp59 protein, is presented in the accompanying article (Dolezal, D., Jones, C. E., Lai, X., Brister, J. R., Mueser, T. C., Nossal, N. G., and Hinton, D. M. (2012) J. Biol. Chem. 287, 18596–18607).

bacteriophage T4↗

Prediction of hydrogen adsorption in nanoporous materials from the energy distribution of adsorption sites

We present a fast and accurate, semi-analytical method for predicting hydrogen adsorption in nanoporous materials. For any temperature and pressure, the adsorbed amount is calculated as an integral over the energy density of adsorption sites (guest-host interactions) plus an average guest-guest term. The guest-host interaction energy is calculated using a classical force field with hydrogen modelled as a single-site probe. The guest-guest interaction energy is approximated using an average coordination number, which is regressed using Gaussian Process Regression (GPR). Local adsorption at each site is then modelled using a Langmuir isotherm, which when weighted with its probability density gives an accurate description of hydrogen adsorption. The method is tested on 933 metal-organic frameworks (MOFs) from the Computation-Ready Experimental (CoRE) MOF database at 77 K from 10 –5 to 100 bar, and the results are compared against GCMC predictions. To demonstrate the utility of the method, we calculated hydrogen adsorption isotherms for 12,914 existing MOF structures, at two different temperatures at a speed about 100 times that of GCMC simulations and analyzed the results. Here, we found 13 MOFs with predicted deliverable capacities exceeding the DOE target of 50 g/L for adsorption at 100 bar, 77 K and desorption at 5 bar, 160 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Inorganic Microsphere Composite for the Selective Removal of Cesium 137 from Acidic Nuclear Waste Solutions - Parts 1 and 2

A new inorganic ion exchange composite for removing radioactive cesium from acidic waste streams has been developed. The new material consists of ammonium molybdophosphate, (NH4)3P(Mo3O10)4•3H2O (AMP), synthesized within hollow aluminosilicate microspheres (AMP-C), which are produced as a by-product from coal combustion. The selective cesium exchange capacity of this inorganic composite was evaluated in bench-scale column tests using simulated sodium bearing waste solution as a surrogate for the acidic tank waste currently stored at the Idaho National Laboratory (INL). Total cesium loading on the columns at saturation agreed very well with equilibrium values predicted from isotherm experiments performed previously. A numerical algorithm for solving the governing partial differential equations (PDE) for cesium uptake was developed using the intraparticle mass transfer coefficient obtained from previous batch kinetic experiments. Solutions to the governing equations were generated to obtain the cesium concentration at the column effluent as a function of throughput volume using the same conditions as those used for the actual column experiments. The numerical solutions of the PDE fit the column break through data quite well for all the experimental conditions in the study. The model should therefore provide a reliable prediction of column performance at larger scales. A new inorganic ion exchange composite consisting of ammonium molybdophosphate, (NH4)3P(Mo3O10)4•3H2O (AMP), synthesized within hollow aluminosilicate microspheres (AMP-C) has been developed. Two different batches of the sorbent were produced resulting in 20% and 25% AMP loading for two and three loading cycles, respectively. The selective cesium exchange capacity of this inorganic composite was evaluated using simulated sodium bearing waste solution as a surrogate for the acidic tank waste currently stored at the Idaho National Laboratory (INL). Equilibrium isotherms obtained from these experiments were very favorable for cesium uptake and indicated maximum cesium loading of approximately 9 % by weight of dry AMP. Batch kinetic experiments were also performed to obtain the necessary data to estimate the effective diffusion coefficient for cesium in the sorbent particle. These experiments resulted in effective intraparticle cesium diffusivity coefficients of 4.99 x 10-8 cm2/min and 4.72 x 10-8 cm2/min for the 20% and 25 % AMP-C material, respectively.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

The adsorption of gold, palladium and platinum from acidic chloride solutions on mesoporous carbons.

Studies on the adsorption characteristics of gold, palladium and platinum on mesoporous carbon (CMK-3) and sulfur-impregnated mesoporous carbon (CMK-3/S) evaluated the benefits/drawbacks of the presence of a layer of elemental sulfur inside mesoporous carbon structures. Adsorption isotherms collected for Au(III), Pd(II) and Pt(IV) on those materials suggest that sulfur does enhance the adsorption of those metal ions in mildly acidic environment (pH 3). The isotherms collected in 1 M HCl show that the benefit of sulfur disappears due to the competing influence of large concentration of hydrogen ions on the ion-exchanging mechanism of metal ions sorption on mesoporous carbon surfaces. The collected acid dependencies illustrate similar adsorption characteristics for CMK-3 and CMK-3/S in 1-5 M HCl concentration range. Sorption of metal ions from diluted aqueous acidic mixtures of actual leached electronic waste demonstrated the feasibility of recovery of gold from such liquors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrahigh pressure equation of state of tantalum to 310 GPa

The isothermal compression of transition metal tantalum ( Ta ) was studied in a diamond anvil cell by x-ray diffraction utilizing rhenium ( Re ) and gold ( Au ) as internal x-ray pressure standards. The Re pressure marker was employed during non-hydrostatic compression to pressures up to 310 GPa while the Au pressure marker was used during quasi-hydrostatic compression in a neon pressuretransmitting medium to 80 GPa. Two ultra-high pressure experiments were conducted on Ta and Re mixtures utilizing focused-ion beam machined toroidal diamond anvils with central flats varying from 8 microns to 16 microns in diameter. The Ta metal was observed to be stable in the body-centered-cubic phase to a volume compression V/V 0 = 0.581. The measured equations of state (EOS) of Ta using two different calibrations of the Re pressure marker are compared with the ambient temperature isotherm derived from shock compression data. We provide a detailed analysis of EOS fit parameters for Ta under quasi-hydrostatic and non-hydrostatic conditions.

36 MATERIALS SCIENCE↗

High-temperature behavior of oxide dispersion strengthening CoNiCrAlY

To fabricate oxide dispersion strengthened bond coatings, commercial Co–30wt-%Ni–20Cr–8Al–0•4Y powder was milled with 2% additions of Al2O3, Y2O3 or Y2O3 + HfO2. Low-pressure plasma sprayed, free-standing specimens were oxidised in air + 10%H2O at 1100 °C both isothermally (100 h) and in 500, 1-h cycles. Dry air cyclic testing conducted at both ORNL and FZJ showed remarkably similar results. In general, the water vapour addition caused more scale spallation. Two LPPS specimens without oxide additions were tested for comparison. The specimens with 2%Al2O3 addition exhibited the best behaviour as the powder already contained 0•4%Y. Additions of 2%Y2O3 and especially 1%Y2O3 + 1%HfO2 resulted in over-doping as evidenced by high mass gains and the formation of Y- and Hf-rich pegs. Scanning transmission electron microscopy of the isothermal specimens showed no Hf and/or Y segregation to the alumina scale grain boundaries in the over-doped specimens.

Unocic, Kinga A.↗

THE INTERACTING GALAXY PAIR KPG 390: H{alpha} KINEMATICS

In this work, we present scanning Fabry-Perot (FP) H{alpha} observations of the isolated interacting galaxy pair NGC 5278/79 obtained with the PUMA FP interferometer. We derived velocity fields and rotation curves for both galaxies. For NGC 5278 we also obtained the residual velocity map to investigate the non-circular motions, and estimated its mass by fitting the rotation curve with disk+halo components. We test three different types of halos (pseudo-isothermal, Hernquist, and Navarro-Frenk-White) and obtain satisfactory fits to the rotation curve for all profiles. The amount of dark matter required by the pseudo-isothermal profile is about 10 times smaller than that for the other two halo distributions. Finally, our kinematical results together with the analysis of dust lane distribution and of surface brightness profiles along the minor axis allowed us to determine univocally that both components of the interacting pair are trailing spirals.

79 ASTRONOMY AND ASTROPHYSICS↗

SUBARU MID-INFRARED IMAGING OF THE QUADRUPLE LENSES. II. UNVEILING LENS STRUCTURE OF MG0414+0534 AND Q2237+030

We present mid-infrared imaging at 11.7 {mu}m for the quadruple lens systems, MG0414+0534 and Q2237+030, using the cooled mid-infrared camera and spectrometer attached on the Subaru telescope. MG0414+0534 is characterized by a bright pair of lensed images (A1, A2) and their optical flux ratio A2/A1 deviates significantly from the prediction of a smooth-lens model. Q2237+030 is 'the Einstein Cross' being comprised of four lensed images, which are significantly affected by microlensing in a foreground lensing galaxy. Our mid-infrared observations of these lensed images have revealed that the mid-infrared flux ratio for A2/A1 of MG0414+0534 is nearly unity (0.90 {+-} 0.04). We find that this flux ratio is systematically small, at 4-5{sigma} level, compared with the prediction of a best smooth-lens model (1.09) represented by a singular isothermal ellipsoid and external shear. The smooth-lens model, which also considers the additional lensing effect of the possible faint satellite, object X, still provides a large flux ratio of A2/A1=1.06, thereby suggesting the presence of more substructures that can explain our observational result. In contrast, for Q2237+030, our high signal-to-noise observation indicates that the mid-infrared flux ratios between all the four images of Q2237+030 are virtually consistent with the prediction of a smooth-lens model. Based on the size estimate of the dust torus surrounding the nuclei of these QSOs, we set limits on the mass of a substructure in these lens systems, which can cause anomalies in the flux ratios. For MG0414+0534, since the required mass of a substructure inside its Einstein radius is {approx}>360 M {sub sun}, millilensing by a cold dark matter substructure is most likely. If it is modeled as a singular isothermal sphere, the mass inside a radius of 100 pc is given as {approx}>1.0 x 10{sup 5} M {sub sun}. For Q2237+030, there is no significant evidence of millilensing, so the reported anomalous flux ratios in shorter wavelengths are entirely caused due to microlensing by stars.

79 ASTRONOMY AND ASTROPHYSICS↗

SUNYAEV-ZEL'DOVICH EFFECT OBSERVATIONS OF THE BULLET CLUSTER (1E 0657-56) WITH APEX-SZ

We present observations of the Sunyaev-Zel'dovich effect (SZE) in the Bullet cluster (1E 0657-56) using the APEX-SZ instrument at 150 GHz with a resolution of 1'. The main results are maps of the SZE in this massive, merging galaxy cluster. The cluster is detected with 23{sigma} significance within the central 1' radius of the source position. The SZE map has a broadly similar morphology to that in existing X-ray maps of this system, and we find no evidence for significant contamination of the SZE emission by radio or IR sources. In order to make simple quantitative comparisons with cluster gas models derived from X-ray observations, we fit our data to an isothermal elliptical {beta} model, despite the inadequacy of such a model for this complex merging system. With an X-ray-derived prior on the power-law index, {beta} = 1.04{sup +0.16} {sub -0.10}, we find a core radius r {sub c} = 142'' {+-} 18'', an axial ratio of 0.889 {+-} 0.072, and a central temperature decrement of -771 {+-} 71 {mu}K{sub CMB}, including a {+-}5.5% flux calibration uncertainty. Combining the APEX-SZ map with a map of projected electron surface density from Chandra X-ray observations, we determine the mass-weighted temperature of the cluster gas to be T {sub mg} = 10.8 {+-} 0.9 keV, significantly lower than some previously reported X-ray spectroscopic temperatures. Under the assumption of an isothermal cluster gas distribution in hydrostatic equilibrium, we compute the gas mass fraction for prolate and oblate spheroidal geometries and find it to be consistent with previous results from X-ray and weak-lensing observations. This work is the first result from the APEX-SZ experiment, and represents the first reported scientific result from observations with a large array of multiplexed superconducting transition-edge sensor bolometers.

99 GENERAL AND MISCELLANEOUS↗