Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Yb{sub 3}AuGe{sub 2}In{sub 3} : an ordered variant of the YbAuIn structure exhibiting mixed-valent Yb behavior.

Yb{sub 3}AuGe{sub 2}In{sub 3} was obtained as large single crystals in high yield from reactions run in liquid indium. Single crystal X-ray diffraction data show that Yb{sub 3}AuGe{sub 2}In{sub 3} is an ordered variant of YbAuIn with lattice constants, a = b = 7.3153(8) {angstrom} and c = 4.4210(5) {angstrom}, and space group P{sub 6}2m. The parent compound YbAuIn was also studied for comparison. YbAuIn crystallizes in the ZrNiAl structure type, hexagonal, P{sub 6}2m space group with lattice parameters a = b = 7.7127(11) {angstrom} and c = 4.0294(8) {angstrom}. In Yb{sub 3}AuGe{sub 2}In{sub 3}, Ge substitutes for one of the two Au positions in the ternary compound Yb{sub 3}Au{sub 3}In{sub 3}. The structure can be described as alternating [Ge{sub 2}In{sub 3}] and [Yb{sub 3}Au] slabs that stack along the c-axis. The magnetic susceptibility data follow a modified Curie-Weiss law. The effective magnetic moment {mu}{sub eff} of 0.52 {micro}B/Yb atom was deduced from the Curie constant and Curie-Weiss constant of {Theta}{sub p} = -1.5 K indicating antiferromagnetic interactions in Yb{sub 3}AuGe{sub 2}In{sub 3}. X-ray absorption near edge spectroscopy (XANES) measurements indicate intermediate valency for Yb in both compounds. The metallic nature of both compounds was confirmed by the resistivity measurements. Specific heat data for Yb{sub 3}AuGe{sub 2}In{sub 3} and YbAuIn give an electronic {gamma} term of 31 and 84 mJ/mol {center_dot} K{sup 2}, respectively, suggesting that the ternary analog is a 'light' heavy fermion compound.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stabilization of Electrocatalytic Metal Nanoparticles at Metal-Metal Oxide-Graphene Triple Junction Points

Carbon-supported metal catalysts are widely used in heterogeneous catalysis and electrocatalysis. In this paper, we report a novel method to deposit metal catalysts and metal oxide nanoparticles on two-dimensional graphene sheets to improve the catalytic performance and stability of the catalyst materials. The new synthesis method allows indium tin oxide (ITO) nanocrystals to be directly grown on functionalized graphene sheets forming the ITO-graphene hybrids. Pt nanoparticles are then deposited to form a special triple-junction structure (Pt-ITO-graphene). Both experimental study and periodic density functional theory calculations show that the supported Pt nanoparticles are stable at Pt-ITO-graphene triple junction points. The new catalyst materials were tested for oxygen reduction for potential applications in polymer electrolyte membrane fuel cells, and they exhibited greatly enhanced stability and activity. The reasons for the high stability and activity of Pt-ITO-graphene are analyzed.

30 DIRECT ENERGY CONVERSION↗

Electronic Structure of C60/Phthalocyanine/ITO Interfaces Studied using Soft X-ray Spectroscopies

The interface electronic structure of a bilayer heterojunction of C{sub 60} and three different phthalocyanines grown on indium tin oxide (ITO) has been studied using synchrotron radiation-excited photoelectron spectroscopy. The energy difference between the highest occupied molecular orbital level of the phthalocyanine (donor) layer and the lowest unoccupied molecular orbital level of the C{sub 60} (acceptor) layer (E{sub HOMO}{sup D} - E{sub LUMO}{sup A}) was determined. The E{sub HOMO}{sup D} - E{sub LUMO}{sup A} of a heterojunction with boron subphthalocyanine chloride (SubPc) was found to be much larger than those of copper phthalocyanine (CuPc) and chloro-aluminum phthalocyanine (ClAlPc). This observation is discussed in terms of the difference of the ionization energy of each donor material. Additionally, we have studied the molecular orientation of the phthalocyanine films on ITO using angle-dependent X-ray absorption spectroscopy. We found that the SubPc films showed significant disorder compared to the CuPc and ClAlPc films and also found that E{sub HOMO}{sup D} - E{sub LUMO}{sup A} varied with the orientation of the ClAlPc molecules relative to the ITO substrate. This orientation could be controlled by varying the ClAlPc deposition rate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In x Ga 1- x As Nanowires on Silicon: One-Dimensional Heterogeneous Epitaxy, Bandgap Engineering, and Photovoltaics

We report on the one-dimensional (1D) heteroepitaxial growth of In x Ga 1-x As (x = 0.2–1) nanowires (NWs) on silicon (Si) substrates over almost the entire composition range using metalorganic chemical vapor deposition (MOCVD) without catalysts or masks. The epitaxial growth takes place spontaneously producing uniform, nontapered, high aspect ratio NW arrays with a density exceeding 1 × 10 8 /cm 2 . NW diameter (~30–250 nm) is inversely proportional to the lattice mismatch between In x Ga 1-x As and Si (~4–11%), and can be further tuned by MOCVD growth condition. Remarkably, no dislocations have been found in all composition In x Ga 1-x As NWs, even though massive stacking faults and twin planes are present. Indium rich NWs show more zinc-blende and Ga-rich NWs exhibit dominantly wurtzite polytype, as confirmed by scanning transmission electron microscopy (STEM) and photoluminescence spectra. Solar cells fabricated using an n-type In 0.3 Ga 0.7 As NW array on a p-type Si(111) substrate with a ~ 2.2% area coverage, operates at an open circuit voltage, V oc , and a short circuit current density, J sc , of 0.37 V and 12.9 mA/cm 2 , respectively. Furthermore, this work represents the first systematic report on direct 1D heteroepitaxy of ternary In x Ga 1-x As NWs on silicon substrate in a wide composition/bandgap range that can be used for wafer-scale monolithic heterogeneous integration for high performance photovoltaics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Toward Active-Matrix Lab-On-A-Chip: Programmable Electrofluidic control Enaled by Arrayed Oxide Thin Film Transistors

Agile micro- and nano-fluidic control is critical to numerous life science and chemical science synthesis as well as kinetic and thermodynamic studies. To this end, we have demonstrated the use of thin film transistor arrays as an active matrix addressing method to control an electrofluidic array. Because the active matrix method minimizes the number of control lines necessary (m + n lines for the m x n element array), the active matrix addressing method integrated with an electrofluidic platform can be a significant breakthrough for complex electrofluidic arrays (increased size or resolution) with enhanced function, agility and programmability. An amorphous indium gallium zinc oxide (a-IGZO) semiconductor active layer is used because of its high mobility of 1-15 cm{sup 2} V{sup -1} s{sup -1}, low-temperature processing and transparency for potential spectroscopy and imaging. Several electrofluidic functionalities are demonstrated using a simple 2 x 5 electrode array connected to a 2 x 5 IGZO thin film transistor array with the semiconductor channel width of 50 {mu}m and mobility of 6.3 cm{sup 2} V{sup -1} s{sup -1}. Additionally, using the TFT device characteristics, active matrix addressing schemes are discussed as the geometry of the electrode array can be tailored to act as a storage capacitor element. Finally, requisite material and device parameters are discussed in context with a VGA scale active matrix addressed electrofluidic platform.

59 BASIC BIOLOGICAL SCIENCES↗

Cytotoxicity of InP/ZnS quantum dots related to reactive oxygen species generation.

Indium phosphide (InP) quantum dots (QDs) have emerged as a presumably less hazardous alternative to cadmium-based particles, but their cytotoxicity has not been well examined. Although their constituent elements are of very low toxicity to cells in culture, they nonetheless exhibit phototoxicity related to generation of reactive oxygen species by excited electrons and/or holes interacting with water and molecular oxygen. Using spin-trap electron paramagnetic resonance (EPR) spectroscopy and reporter assays, we find a considerable amount of superoxide and a small amount of hydroxyl radical formed under visible illumination of biocompatible InP QDs with a single ZnS shell, comparable to what is seen with CdTe. A double thickness shell reduces the reactive oxygen species concentration approximately two-fold. Survival assays in five cell lines correspondingly indicate a distinct reduction in toxicity with the double-shell InP QDs. Toxicity varies significantly across cell lines according to the efficiency of uptake, being overall significantly less than what is seen with CdTe or CdSe/ZnS. This indicates that InP QDs are a useful alternative to cadmium-containing QDs, while remaining capable of electron-transfer processes that may be undesirable or which may be exploited for photosensitization applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Effect of Amorphization Conditions on the Measured Activation of Source Drain Extension Implants

Un-patterned wafers were processed using low-dose Indium or medium-dose Germanium pre-amorphization implants (PAI) followed by p-type dopant implants of BF{sub 2} or carborane (CBH). The wafers were then annealed by RTA (spike), laser anneal (LSA) or combination of LSA and spike. Active dopant distributions calculated from SIMS and sheet resistance measurements compared favorably with those determined by differential Hall, which is a challenging technique for shallow profiles. The trends in B diffusion behavior and activation are discussed in relation to the different implant damage budgets, damage evolution during the anneals and presence of fluorine. In particular, for low thermal budget LSA only anneals, CBH implants appear to give higher activation than BF{sub 2} due to the absence of fluorine.

36 MATERIALS SCIENCE↗

Quantum size effect as evidenced by small-angle X-ray scattering of In{sub 2}O{sub 3} nanoparticles

Indium oxide nanoparticles were synthesized by a surfactant-free room-temperature soft chemistry route. The medium particle size of the thermally treated gel was evaluated by X-ray diffraction experiments, nitrogen adsorption measurements, transmission electron microscopy observations and small-angle X-ray scattering using synchrotron radiation. The main results show the single-crystalline nature of the prepared nanoparticles with 8 nm in diameter. The photoluminescence emission spectrum at room-temperature shows a broad peak with onset at, approximately, 315 nm as a result of quantum size effect produced by a small population of nanoparticles with average size of about 2.8 nm as revealed by small-angle X-ray scattering.

36 MATERIALS SCIENCE↗

Strong plasmon absorption in InN thin films

We have fabricated InN thin films using rf magnetron sputtering from an indium (In) metal target. Optical and electrical measurements show that these as-grown films are n-type with carrier concentrations ranging from 10{sup 20} to 10{sup 21} cm{sup -3}. This variation in carrier density is produced by controlling the conditions during the deposition. We used Rutherford backscattering spectrometry to identify possible sources for n-type carriers. We found that in addition to strong direct bandgap optical absorption ranging from 1.4 to 2.0 eV, a large plasmon absorption peak in the infrared region (0.45-0.8 eV) is also observed. This tunable IR absorption suggests that these highly degenerate InN films could be used for a number of applications, including optical filters and infrared devices.

36 MATERIALS SCIENCE↗

Role of Amorphous Silicon and Tunneling in Heterojunction with Intrinsic Thin Layer (HIT) Solar Cells

This work analyzes heterojunction with intrinsic thin layer (HIT) solar cells using numerical simulations. The differences between the device physics of cells with p- and n-type crystalline silicon (c-Si) wafers are substantial. HIT solar cells with n-type wafers essentially form a n/p/n structure, where tunneling across the junction heterointerfaces is a critical transport mechanism required to attain performance exceeding 20%. For HIT cells with p-type wafers, only tunneling at the back-contact barrier may be important. For p-wafer cells, the hydrogenated amorphous silicon (a-Si:H) between the indium tin oxide (ITO) and crystalline silicon may act as a passivating buffer layer but, otherwise, does not significantly contribute to device performance. For n-wafer cells, the carrier concentration and band alignment of this a-Si:H layer are critical to device performance.

14 SOLAR ENERGY↗

PIXE Analysis of Metal Hull Bolts From HMB DeBraak

HMB DeBraak was a 16-gun British brig-sloop that sank in a squall on May 25, 1798 off Cape Henlopen, Delaware. Silt covered the wooden hull shortly after it sank, preserving it until DeBraak was raised in 1986. The items recovered from the ship include metal bolts that held the hull together. We used PIXE to measure the compositions of 45 of the bolts and found that they are nearly pure copper (98.3% on average), with most also containing small amounts of iron (0.87%), nickel (0.039%), arsenic (0.43%), silver (0.089%), lead (0.18%), and bismuth (0.12%). A few contain a little indium, tin, or antimony, but none contain zinc above the quantization level. The compositions are similar to those reported for 18th-century English copper, but different from several copper alloys also used to make hull bolts. We conclude that, when DeBraak was last fitted out in 1795-1797, the Royal Navy was still using bolts similar to William Forbes's mechanically hardened pure copper bolts. Forbes's process represents the successful innovation and application of new technology in Royal Navy ships during the wars of the late 18th century.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of rhenium oxide films and their application to liquid crystal cells

Rhenium trioxide exhibits high electronic conductivity, while its open cubic crystal structure allows an appreciable hydrogen intercalation, generating disordered solid phases, with protonic conductivity. Rhenium oxide thin films have been obtained by thermal evaporation of ReO{sub 3} powders on different substrates, maintained at different temperatures, and also by reactive magnetron sputtering of a Re metallic target. A comparative investigation has been carried out on these films, by using micro-Raman spectroscopy and x-ray diffraction. Two basic types of solid phases appear to grow in the films: a red metallic H{sub x}ReO{sub 3} compound, with distorted perovskite structures, like in the bulk material, and ordered HReO{sub 4} crystals based on tetrahedral perrhenate ions. Because of its conduction properties, the electrical and electro-optical behaviors of ReO{sub 3} films deposited on standard indium tin oxide/glass substrate have been tested inside asymmetric nematic liquid crystal cells, showing an appreciable capability of rectification of their electro-optical response, in similar way to tungsten trioxide.

36 MATERIALS SCIENCE↗

Aluminum doped zinc oxide for organic photovoltaics

Aluminum doped zinc oxide (AZO) was grown via magnetron sputtering as a low-cost alternative to indium tin oxide (ITO) for organic photovoltaics (OPVs). Postdeposition ozone treatment resulted in devices with lower series resistance, increased open-circuit voltage, and power conversion efficiency double that of devices fabricated on untreated AZO. Furthermore, cells fabricated using ozone treated AZO and standard ITO displayed comparable performance.

36 MATERIALS SCIENCE↗

Enhanced hole injection in organic light-emitting devices by using Fe{sub 3}O{sub 4} as an anodic buffer layer

Hole injection improvement in organic light-emitting devices with Fe{sub 3}O{sub 4} as a buffer layer on indium tin oxide (ITO) has been demonstrated. The luminance and the current density are significantly enhanced by using the Fe{sub 3}O{sub 4}/ITO anode, as well as the turn-on voltage is reduced by 1.5 V compared to the devices without the buffer. Results of atom force microscopy, x ray, and UV photoelectron spectroscopy studies reveal that the enhanced hole injection is attributed to the modification of the ITO surface and the reduced hole-injection barrier by the insertion of the Fe{sub 3}O{sub 4} thin film between the ITO and hole-transporting layer.

36 MATERIALS SCIENCE↗

Electronic Nose For Measuring Wine Evolution In Wine Cellars

An electronic nose installed in a wine cellar for measuring the wine evolution is presented in this paper. The system extract the aroma directly from the tanks where wine is stored and carry the volatile compounds to the sensors cell. A tin oxide multisensor, prepared with RF sputtering onto an alumina substrate and doped with chromium and indium, is used. The whole system is fully automated and controlled by computer and can be supervised by internet. Linear techniques like principal component analysis (PCA) and nonlinear ones like probabilistic neural networks (PNN) are used for pattern recognition. Results show that system can detect the evolution of two different wines along 9 months stored in tanks. This system could be trained to detect off-odours of wine and warn the wine expert to correct it as soon as possible, improving the final quality of wine.

36 MATERIALS SCIENCE↗

The Study of Energy Band Gap of In{sub x}Al{sub y}Ga{sub 1-x-y}N Quaternary Alloys using UV-VIS Spectroscopy

Quaternary In{sub x}Al{sub y}Ga{sub 1-x-y}N alloys with indium (In) mole fraction x ranging from 0.01 to 0.10 and constant aluminum (Al) mole fraction y = 0.06, were grown by molecular beam epitaxy. The energy band gaps of InAlGaN alloys were investigated using UV-VIS spectroscopy under room temperature. The energy band gap decreases with increasing In composition from 0.01 to 0.08. This trend is expected since the incorporation of In lowers the energy band gap of Al{sub 0.06}Ga{sub 0.94}N(3.72 eV). However, for InAlGaN with In composition of 0.1, the band gap shows a sudden increase in energy. This is probably due to local alloy compositional fluctuations in the epilayer, contributed by incomplete substitutions of Ga atoms by the In atoms, thus retaining a much richer GaN structure. Finally, we investigate the bowing parameter appears also to be very sensitive on In content. We obtained b 50.08 for quaternary InAlGaN alloys.

36 MATERIALS SCIENCE↗

Top-emission Si-based phosphor organic light emitting diode with Au doped ultrathin n-Si film anode and bottom Al mirror

We report a highly efficient top-emission Si-based phosphor organic light emitting diode (PhOLED) with an ultrathin polycrystalline n-Si:Au film anode and a bottom Al mirror. This anode is formed by magnetron sputtering followed by Ni induced crystallization and then Au diffusion. By optimizing the thickness of the n-Si:Au film anode, the Au diffusion temperature, and the other parameters of the PhOLED, the highest current and power efficiencies of the n-Si:Au film anode PhOLED reached 85{+-}9 cd/A and 80{+-}8 lm/W, respectively, corresponding to an external quantum efficiency of 21{+-}2% and a power conversion efficiency of 15{+-}2%, respectively, which are about 60% and 110% higher than those of the indium tin oxide anode counterpart and 70% and 50% higher than those of the bulk n{sup +}-Si:Au anode counterpart, respectively.

36 MATERIALS SCIENCE↗