Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPACT SHOCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Relativistic hydrodynamic simulation of jet deceleration in GRB

Using the novel adaptive mesh refinement code, AMRVAC, we investigate the interaction between collimated ejecta (jetlike fireball models with various opening angle) with its surrounding cold Interstellar Medium (ISM). This is relevant for Gamma Ray Bursts, and we demonstrate that, thanks to the AMR strategy, we resolve the internal structure of the shocked shell-ISM matter. We determine the deceleration from an initial Lorentz factor {gamma} = 100 up to the almost Newtonian {gamma}{approx}O(3) phase of the flow. We discuss the effect of varying the opening angle on the deceleration, and pay attention to differences with their 1D isotropic GRB equivalents. These are due to thermally induced sideways expansions of both shocked shell and shocked ISM regions. The propagating 2D ultrarelativistic shell does not accrete all the surrounding medium located within its initial opening angle. The difference with isotropic GRB models is quite pronounced for shells with small opening angle. In the most collimated ejecta (open angle of 1 deg.), the deceleration phase (once the reverse shock has traversed the shell structure) shows distinct modulation, attributed to repeated rarefactions traversing the shell. These may have a clear impact on the emitted afterglow radiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Empirical estimation of weather-driven yield shocks using biophysical characteristics for U.S. rainfed and irrigated maize, soybeans, and winter wheat

Agricultural yields are highly susceptible to changes in weather system patterns, including both annual and sub-annual changes in temperature and precipitation. Understanding the impacts of future changes in meteorological variables on crop yields have been widely studied in both empirical and process-based models. This work presents a structural econometric approach that combines historical weather data with information about the biophysical growth cycles of maize, winter wheat, and soy to predict the year-to-year yield responses for rainfed crops. Modeled soil moisture and temperature are taken as key predictors, which allows testing the fitted rainfed model’s ability to predict irrigated yields by assuming irrigation produces the numerically optimal level of soil moisture. This approach is grounded in known biophysical processes, which improves confidence in the model predictions. It produces estimates of interannual variability in yields, which enable study of the effects of extreme events on agricultural productivity. Finally, it enables prediction of the potential impacts of changing weather patterns on irrigated crops in areas that are currently primarily rainfed. We present the results of the empirical model, fitted with rainfed data; out-of-sample validation on irrigated crops; and projections of yield shocks under multiple future climate scenarios. Under a bias-corrected GFDL RCP8.5 scenario, this approach predicts average yield change, relative to 2006-2020 average yields, across U.S. counties in the 2040-2060 period of -16.9% and -13.4% for rainfed and irrigated maize, of -19.1% and -18.4% for rainfed and irrigated soy, and of -4.0% and -2.0% for rainfed and irrigated winter wheat. And in the 2070-2090 period of -30.3% and -28.8 % for rainfed and irrigated maize, of -33.1% and -32.8% for rainfed and irrigated soy, and of -6.5% and -5.2%for rainfed and irrigated winter wheat.

54 ENVIRONMENTAL SCIENCES↗

Coupling continuum dislocation transport with crystal plasticity for application to shock loading conditions

Here, we have developed a multi-physics modeling approach that couples continuum dislocation transport, nonlinear thermoelasticity, crystal plasticity, and consistent internal stress and deformation fields to simulate the single-crystal response of materials under extreme dynamic conditions. Dislocation transport is modeled by enforcing dislocation conservation at a slip-system level through the solution of advection-diffusion equations. Nonlinear thermoelasticity provides a thermodynamically consistent equation of state to relate stress (including pressure), temperature, energy densities, and dissipation. Crystal plasticity is coupled to dislocation transport via Orowan's expression where the constitutive description makes use of recent advances in dislocation velocity theories applicable under extreme loading conditions. The configuration of geometrically necessary dislocation density gives rise to an internal stress field that can either inhibit or accentuate the flow of dislocations. An internal strain field associated with the internal stress field contributes to the kinematic decomposition of the overall deformation. The paper describes each theoretical component of the framework, key aspects of the constitutive theory, and some details of a one-dimensional implementation. Results from single-crystal copper plate impact simulations are discussed in order to highlight the role of dislocation transport and pile-up in shock loading regimes. The main conclusions of the paper reinforce the utility of the modeling approach to shock problems.

36 MATERIALS SCIENCE↗

Original size of the Vredefort structure, South Africa

The Vredefort structure is located approximately 120 km southwest of Johannesburg, South Africa, and is deeply eroded. Controversies remain on the origin of this structure with the most popular hypotheses being: (1) by impact cratering about 2.0 Ga; (2) as a cryptoexplosion structure about 2.0 Ga; and (3) by purely tectonic processes starting at about 3.0 Ga and ending with the Vredefort event at 2.0 Ga. In view of recent work in which the granophyre dikes are interpreted as the erosional remants of a more extensive impact melt sheet, injected downward into the underlying country rocks, the impact origin hypothesis for Vredefort is adopted. In order to estimate the original dimensions of the Vredefort impact structure, it is assumed that the structure was initially circular, that its predeformation center corresponds to the center of the granitic core, and that the pre-Vredefort geology of the area prior to approximately 2.0 Ga ago is as suggested by Fletcher and Reimold. The spatial relationship between shock metamorphic effects, the shock pressures they record, and the morphological features of the crater were established for a number of large terrestrial craters. The principles of crater formation at large complex impact structures comparable in size to Vredefort were also established, although many details remain unresolved. An important conclusion is that the transient crater, which is formed directly by excavation and displacement by the shock-induced cratering flow-field (i.e., the particle velocity flow field existing in the region of the transient crater but behind the initial outgoing shock front), is highly modified during the late stage processes. The original transient crater diameter lies well within the final rim of the crater, which is established by structural movements during late-stage cavity modification.

Therriault, A. M.↗

Sulfur Chemistry in the Wake of Comet Shoemaker-Levy 9

A curious and unexpected result of the impact of P/Shoemaker Levy 9 with Jupiter was the production of enormous amounts of molecular sulfur (S2). Here we show that S2 is the natural product of disequilibrium chemistry at low pressures in shocked Jovian air, its formation a byproduct of hydrogen recombination. The species observed by the Hubble Space Telescope (HST) - S2, CS2, and H2S - imply that the G fragment penetrated the NH4SH cloud but did not reach the water table. A typical impact within or below the NH4SH clouds produces about 0.03 - 0.1 impactor masses of S2. Because comets are relatively hydrogen-poor, SO2, not S2, is the major product of shocking a water-rich comet, while S2, CS2 and OCS are major products of a dessicated comet. In all cases we find that as the gas cools, S2 converts to the stable low temperature allotrope S8, although other chemical fates not modeled here might intervene first.

Zahnle, Kevin↗

Lunar and Planetary Science XXXVI, Part 19

The topics include: 1) The abundances of Iron-60 in Pyroxene Chondrules from Unequilibrated Ordinary Chondrites; 2) LL-Ordinary Chondrite Impact on the Moon: Results from the 3.9 Ga Impact Melt at the Landing Site of Appolo 17; 3) Evaluation of Chemical Methods for Projectile Identification in Terrestrial and Lunar Impactites; 4) Impact Cratering Experiments in Microgravity Environment; 5) New Achondrites with High-Calcium Pyroxene and Its implication for Igneous Differentiation of Asteroids; 6) Climate History of the Polar Regions of Mars Deduced form Geologic Mapping Results; 7) The crater Production Function for Mars: A-2 Cumulative Power-Law Slope for Pristine Craters Greater than 5 km in Diameter Based on Crater Distribution for Northern Plains Materials; 8) High Resolution Al-26 Chronology: Resolved Time Interval Between Rim and Interior of a Highly Fractionated Compact Type a CAI from Efremovka; 9) Assessing Aqueous Alteration on Mars Using Global Distributions of K and Th; 10) FeNi Metal Grains in LaPaz Mare Basalt Meteorites and Appolo 12 Basalts; 11) Unique Properties of Lunar Soil for In Situ Resource Utilization on the Moon; 12) U-Pb Systematics of Phosphates in Nakhlites; 13) Measurements of Sound Speed in Granular Materials Simulated Regolith; 14) The Effects of Oxygen, Sulphur and Silicon on the Dihedral Angles Between Fe-rich Liquid Metal and Olivine, Ringwoodite and Silicate Perovskite: Implications for Planetary Core Formation; 15) Seismic Shaking Removal of Craters 0.2-0.5 km in Diameter on Asteroid 433 Eros; 16) Focused Ion Beam Microscoopy of ALH84001 Carbonate Disks; 17) Simulating Micro-Gravity in the Laboratory; 18) Mars Atmospheric Sample Return Instrument Development; 19) Combined Remote LIBS and Raman Spectroscopy Measurements; 20) Unusual Radar Backscatter Properties Along the Northern Rim of Imbrium Basin; 21) The Mars Express/NASAS Project at JPL; 22) The Geology of the Viking 2 Lander Site Revisited; 23) An Impact Genesis for Loki Patera? 24) Mars Polar Cap Edges Tracked over 3 Full Mars Years; 25) Elemental Abundance in Presolar SiC: Comparing Grains Separated by Acid Residue and Gently Separation Procedures; 26) First Results from the Descent Imager/Spectral Radiometer (DISR) Experiment on the Huygens Entry Probe of Titan; 27) Minor Element Behavior of Pallasite Olivine: Understanding Pallasite Thermal History and Chronology; 28) Canonical Anorthite in a Grosnaja Forsterite-bearing CAI; 29) Experimental Evidence for Condensation of 'Astrophysical' Carbonate; 30) Distribution and Classification of Multiple Coronae on Venus; 31) Recognition of Rayed Craters on Mars in THEMIS Thermal Infrared Imagery: Implications for Martian Meteorite Source Regions; 32) Geochemical Modeling of Evaporites on Mars: Insight from Meridiani Planum; 33) Hadean Crustal Processes Revealed from Oxygen Isotopes and U-Th-Pb Depth Profiling of Pre-4.0 Ga Detrital Zircons from Western Australia; 34) On Modeling the Seepage of Water into the Martian Subsurface; 35) Martial Gullies and Groundwater: A Series of Unfortunate Exceptions; 36) Olivine and Carbonate Globules in ALH84001: A Terrestrial Analog, and Implications for Water on Mars; 37) A Reevaluation of Mass Movements Within the Valles Marineris Region of Mars Using MOLA and MOC Data; 38) Evidence of Hydrated 109P/Swift-Tuttle Meteoroids from Meteor Spectroscopy; 39) Cr-54 Anomalies in the Solar System: Their Extent and Origin; 40) Reevaluation of the Mn-53-Cr-53 Systematic in the Basaltic Achondrites; 41) Effective Liquid Metal-Silicate Mixing Upon Shock by Power-Law Droplet Size Scaling in Richtmyer-Meshkov Like Perturbations; 42) Post-Impact Deformation of Impact Craters: Towards a Better Understanding Through the Study of Mjolnir Crater; 43) Cutting Silica Aerogel for Particle Extraction; 44) Liquid Hydrocarbons on Titan's Surface? How Cassini ISS Observations Fit into the Story (So Far); and 45) Mesoscale Simulations of Polar Circulations: Late Spring to Late Summe

Source record↗

Multi-Scale Analysis of an Ilmenite Microcrater in Lunar Sample 71055

Micrometeorite impacts are a key space weathering process on the lunar surface, generating a variety of physical and chemical changes in the lunar regolith. Several experiments using nanosecond pulsed lasers to simulate micrometeorite impact have been published in the past two decades, providing a wealth of knowledge, including how minerals vary in their response to laser irradiation. Although these experiments have produced many features analogous to those observed in natural samples, none could be attributed to the passage of a shock wave, resulting instead from hot ablation. Recent femtosecond laser irradiation of olivine and enstatite have more accurately reproduced the shock textures observed in lunar samples, improving our ability to coordinate experimental and lunar sample data. Both pulsed laser experiments and studies of lunar impact craters have focused on silicates, as they comprise the bulk of the regolith. Ilmenite (FeTiO 3 ) is the most abundant opaque mineral in lunar rocks and an important sink of solar wind implanted helium. Ilmenite is known to vary in its response to radiation processing relative to the silicates, but its response to micrometeorite impact has not yet been studied in natural samples nor in the laboratory. In this investigation, we characterize an ilmenite microcrater using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to learn how ilmenite responds to impact and if there are implications for helium cycling in the regolith.

B A Cymes↗

Estimates of Ta strength at ultrahigh pressures and strain rates using thin-film graded-density impactors

In this paper, we present results from an experimental technique used to estimate the strength of Ta at extreme pressures (150 GPa) and strain rates (10 7 s -1 ). A graded-density impactor (GDI) was fabricated using sputter deposition to produce an approximately 40-μm-thick film containing alternating layers of Al and Cu. The thicknesses of the respective layers are adjusted to give an effective density gradient through the film. The GDIs were launched with a 2-stage light gas gun, and shock-ramp-release velocity profiles were measured over timescales of ~10 ns. Results are presented for the direct impact of the film onto LiF windows, which allows for a dynamic characterization of the GDI, as well as from impact onto thin (~40μm) sputtered Ta samples backed by a LiF window. The measurements were coupled with mesoscale numerical simulations to infer the strength of Ta, and the results agree well with other high-pressure platforms, particularly when strain-rate, microstructural, and thermodynamic-path differences are considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of Simultaneous Shock Temperature Measurements from Three Different Pyrometry Systems

Pyrometry is one of the most prevalent techniques for measuring temperature in shock physics experiments. However, the challenges of applying pyrometry in such highly dynamic environments produces multiple sources of uncertainty that require investigation. An outstanding question is the degree of agreement between different pyrometers and different experiments. Here we report a series of novel plate impact experiments with simultaneous thermal radiance measurements using three different multi-wavelength optical pyrometry systems, each with different spatial and temporal resolutions, on samples shocked to identical states. We compare the temperatures measured by each system and their associated uncertainties using a number of emissivity assumptions. The results shown that the measurements from all three systems agree within uncertainty. Furthermore, some non-thermal light contamination was observed despite a number of prevention measures.

36 MATERIALS SCIENCE↗

Fractal Scaling of Explosively Driven Product Gases

ABSTRACT Characterization of the interface between explosive product gases and ambient air in an explosion is a complicated task due to the turbulent mixing and inherently three‐dimensional expansion of the interface. This study aims to quantify the evolution of the interface as a temporally varying Hausdorff dimension. Two test series were conducted with Composition C‐4 charges with masses of 105 and 880 g. Imaging data were collected from the time of detonation until shock wave detachment using ultra‐high‐speed cameras. Gas cloud profiles were extracted using automated image processing algorithms, and the Hausdorff dimension of these two‐dimensional slices of the gas cloud was then estimated using boxcounting algorithms. When scaled with standard gas dynamic nondimensional scalings, the Hausdorff dimension of all explosive events appears to collapse towards a single curve. The fireball was initially nonfractal and began to develop fractal properties as the shock wave separated from the detonation products. Artificial perturbation of the charged surface had no detectable impact on the evolution of the Hausdorff dimension in the early development of the fireball outside of error, despite visible phenomenological differences in the early development of mixing on the fireball surface.

42 ENGINEERING↗

Burden of bacterial bloodstream infections and recent advances for diagnosis

Abstract Bloodstream infections (BSIs) and subsequent organ dysfunction (sepsis and septic shock) are conditions that rank among the top reasons for human mortality and have a great impact on healthcare systems. Their treatment mainly relies on the administration of broad-spectrum antimicrobials since the standard blood culture-based diagnostic methods remain time-consuming for the pathogen's identification. Consequently, the routine use of these antibiotics may lead to downstream antimicrobial resistance and failure in treatment outcomes. Recently, significant advances have been made in improving several methodologies for the identification of pathogens directly in whole blood especially regarding specificity and time to detection. Nevertheless, for the widespread implementation of these novel methods in healthcare facilities, further improvements are still needed concerning the sensitivity and cost-effectiveness to allow a faster and more appropriate antimicrobial therapy. This review is focused on the problem of BSIs and sepsis addressing several aspects like their origin, challenges, and causative agents. Also, it highlights current and emerging diagnostics technologies, discussing their strengths and weaknesses.

Costa, Susana P.↗

Surface erosion and modification by highly charged ions.

Analyses were conducted of various models and mechanisms of highly charged ion (HCI) and swift-heavy ion energy transfer into a solid target, such as hollow atom formation, charge screening, neutralization, shock wave generation, crater formation, and sputtering. A plasma model of space charge neutralization based on impact ionization of semiconductors at high electric fields was developed and applied to analyze HCI impacts on Si and W. Surface erosions of semiconductor and metal surfaces caused by HCI bombardments were studied by using a molecular dynamics simulation method, and the results were compared with experimental sputtering data.

36 MATERIALS SCIENCE↗

(U) Design Considerations for Obtaining Deep Release in Reacted Epon 828

Our document summarizes results from one-dimensional calculations performed to investigate the release behavior of reacted Epon 828. Two design goals were set, (1) the product phase had to be achieved upon the initial shock loading, and (2) a deep release state could be achieved. Both transmission and front surface impact geometry were investigated. Moreover, the two design criteria were met with the front surface impact design employing a modi ed projectile.

42 ENGINEERING↗

Correlation of Injury Simulation with Clinical Assessment of Traumatic Brain Injury

This report contains a summary of our efforts to correlate head injury simulations predicting intracranial fluid cavitation with clinical assessments of brain injury from blunt impact to the head. Magnetic resonance imaging (MRI) data, collected on traumatic brain injury (TBI) subjects by researchers at the MIND Institute of New Mexico, was acquired for the current work. Specific blunt impact TBI case histories were selected from the TBI data for further study and possible correlation with simulation. Both group and single-subject case histories were examined. We found one single-subject case that was particularly suited for correlation with simulation. Diffusion tensor image (DTI) analysis of the TBI subject identified white matter regions within the brain displaying reductions in fractional anisotropy (FA), an indicator of local damage to the white matter axonal structures. Analysis of functional magnetic resonance image (fMRI) data collected on this individual identified localized regions of the brain displaying hypoactivity, another indicator of brain injury. We conducted high fidelity simulations of head impact experienced by the TBI subject using the Sandia head-neck-torso model and the shock physics computer code CTH. Intracranial fluid cavitation predictions were compared with maps of DTI fractional anisotropy and fMRI hypoactivity to assess whether a possible correlation exists. The ultimate goal of this work is to assess whether one can correlate simulation predictions of intracranial fluid cavitation with the brain injured sites identified by the fMRI and DTI analyses. The outcome of this effort is described in this report.

59 BASIC BIOLOGICAL SCIENCES↗

Correlation of Injury Simulation with Clinical Assessment of Traumatic Brain Injury

This report contains a summary of our efforts to correlate head injury simulations predicting intracranial fluid cavitation with clinical assessments of brain injury from blunt impact to the head. Magnetic resonance imaging (MRI) data, collected on traumatic brain injury (TBI) subjects by researchers at the MIND Institute of New Mexico, was acquired for the current work. Specific blunt impact TBI case histories were selected from the TBI data for further study and possible correlation with simulation. Both group and single-subject case histories were examined. We found one single-subject case that was particularly suited for correlation with simulation. Diffusion tensor image (DTI) analysis of the TBI subject identified white matter regions within the brain displaying reductions in fractional anisotropy (FA), an indicator of local damage to the white matter axonal structures. Analysis of functional magnetic resonance image (fMRI) data collected on this individual identified localized regions of the brain displaying hypoactivity, another indicator of brain injury. We conducted high fidelity simulations of head impact experienced by the TBI subject using the Sandia head-neck-torso model and the shock physics computer code CTH. Intracranial fluid cavitation predictions were compared with maps of DTI fractional anisotropy and fMRI hypoactivity to assess whether a possible correlation exists. The ultimate goal of this work is to assess whether one can correlate simulation predictions of intracranial fluid cavitation with the brain injured sites identified by the fMRI and DTI analyses. The outcome of this effort is described in this report.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Second Target Station Project: LANSCE WNR Target 2 (Blue Room) Experiment 2022

The Second Target Station (STS) at SNS will address emerging scientific challenges by providing a source of intense, cold neutrons to instruments optimized for this source, using rotating, tungsten target blocks. The STS target will receive 1.3 GeV proton beam pulses from the SNS accelerator at a repetition rate of 15 Hz. The facility life is planned for 40 years, and each target assembly life is expected to be approximately 10 years. An accurate strain prediction is then critical for fatigue life assessment of STS target blocks because they will be subject to approximately 108 beam pulses per lifetime. As an R&D activity, the LANSCE WNR Target 2 (blue room) facility was used to test the strain response of prototypical target blocks to the thermal shock of a proton pulse. The blue room was well suited for a pulsed proton beam impact test of subscale STS target blocks; the 800 MeV proton energy is approximately 60% of the 1.3 GeV proton energy expected from the SNS accelerator to the STS. Both the LANSCE Proton Storage Ring (PSR) and SNS are short-pulse proton beam sources with nominal pulse widths of 250 ns and 661 ns, respectively, so the energy deposition in the target occurs in < 1 microsecond pulse duration.

43 PARTICLE ACCELERATORS↗

Outer planet entry nonequilibrium heating

An analytical tool has been developed which enables the impact of nonequilibrium effects on outer planet entry heating to be estimated. The analysis combines recent shock tube experiments, flow field calculations, and planetary entry trajectory analysis. The thickness of the nonequilibrium layer and its variation around the entry body have been correlated by a reaction flow parameter over a wide range of entry conditions. The influence of nonequilibrium effects on heating during entry into Saturn and Jupiter model atmospheres has been studied and the effect of vehicle size and ballistic coefficient determined. A nonequilibrium layer of significant thickness was found to exist during portions of entry into Saturn and Jupiter warm atmospheres. However, the nonequilibrium layer was found to be thin during the peak heating portions of the trajectory and resulted in reductions in total probe heating of less than 15 per cent.

Leibowitz, L. P.↗

Impact conditions required for formation of melt by jetting in silicates

It is demonstrated that the process of jetting which occurs when particles collide at oblique angles may produce melt at much lower velocities than are required for melt production in head-on collisions. The minimum velocities of impact required for jetting in aluminum, bronzitite, dunite, and quartz are calculated by the method of shock polars. The analysis, which depends on stated assumptions about attained pressures and the occurrence of jetting, uses shock-velocity particle-velocity equations of state with three shock regimes. The treatment indicates that jetting should arise in bronzitite, dunite, and quartz at relative velocities as low as 1-2 km/sec. At such velocities material which passes near the stagnation point in the jet-forming region is subjected to sufficiently high pressures so that it is probably melted.

Kieffer, S. W.↗