Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HARDNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Hard X-Ray Lags in GRO J1719-24

We have used the Fourier cross spectra of GRO J1719-24. as obtained with BATSE, to estimate the phase lags between the X-ray flux variations in the 20-,50 and 50-100 keV energy bands as a function of Fourier frequency in the interval 0.002-0.488 Hz. Our analysis covers the entire approximately 80 day X-ray outburst of this black-hole candidate, following the first X-ray detection on 1993 September 25. The X-ray variations in the 50-100 keV band, lag those in the 20-50 keV energy band by an approximately constant phase difference of 0.072 +/- 0.010 rad in the frequency interval 0.02-0.20 Hz. The time lags of GRO J1719-24 decrease with frequency as a power law, with index 1.04 +/- 0.13 for frequencies >/= 0.01 Hz. These results are discussed together with those obtained in recent similar studies of the black-hole candidates Cyg X-1 and GRO J0422+32.

VanderHooft, Frank↗
NASA NTRS1999

Hard X-Ray Lags in GRO J1719--24

We have used the Fourier cross spectra of GRO J1719-24, obtained with BATSE, to estimate the phase lags between the X-ray flux variations in the 20 50 and 50-100 keV energy bands as a function of Fourier frequency in the interval 0.002-0.488 Hz. Our analysis covers the entire about 80 day X-ray outburst of this black hole candidate, following the first X-ray detection on 1993 September 25. The X-ray variations in the 50-100 keV band lag those in the 20-50 keV energy band by an approximately constant phase difference of 0.072 + 0.010 rad in the frequency interval 0.02-0.20 Hz. The peak phase lags in the interval 0.02-0.20 Hz are about twice those of Cyg X-1 and GRO J0422+32. These results are consistent with models for Comptonization regions composed of extended nonuniform clouds around the central source.

VanDerHooft, F.↗
NASA NTRS1999

Hard X-Ray Detection of the High Redshift Quasar 4C 71.07

BATSE/OSSE observations of the high redshift quasar 4C 71.07 indicate that this is the brightest and furthest AGN so far detected 20 keV. BATSE Earth occultation data have been used to search for emission from 4C 71.07 from nearly 3 years of observation. The mean source flux over the- whole period in the BATSE energy range 20-100 keV is (13.2 +/- 1.06) x 10(exp -11) erg/square cm/s corresponding to a luminosity of 2 x 10(exp 48 erg/s. The BATSE light curve over the 3 years of observations shows several flare-like events, one of which (in January 1996) is associated with an optical flare (R=16.1) but with a delay of 55 days. The OSSE/BATSE spectral analysis indicates that the source is characterized by a flat power spectrum (Gamma is approximately 1.1- 1.3) when in a low state: this spectral form is consistent within errors with the ASCA and ROSAT spectra. This means that the power law observed from 0.1 to 10 keV extends up to at least 1 MeV but steepens soon after to meet EGRET high energy data. BATSE data taken around the January 1996 flare suggests that the spectrum could be steeper when the source is in a bright state. The upsilon-F-upsilon representation of the source is typical of a low frequency peaked/ gamma- ray dominated blazar, with the synchrotron peak in the mm-FIR band and the Compton peak in the MeV band. The BATSE and OSSE spectral data seem to favour a model in which the high energy - flux is due to the sum of the synchrotron self-Compton and the external Compton contributions: this is also supported by the- variability behaviour of the source.

Malizia, A.↗
NASA NTRS2001

Hard X-Ray Lightcurves of High Mass X-Ray Binaries

Using the 7.2 years of continuous data now available from the Burst And Transient Source Experiment (BATSE) aboard CGRO, we have measured orbital periods and produced folded lightcurves for 8 High Mass X-ray Binaries (HMXB). Given the length of the datasets, our determinations are based on many more binary orbits than previous investigations. Thus our source detections have high statistical significance and we are able to follow long-term trends in X-ray output. In particular we focus on two systems: A0538-668 and EXO2030+375 both HMXBs exhibiting Type I outbursts. Recent work on A0538-668 (Alcock et al 1999) reported a 16.65d optical variability due to the orbital period, but only seen during minima of a longer-term variability at 421d. We searched for this signal in the BATSE dataset using an ephemeris derived from Alcock et al ( 1999) & Skinner ( 1982). We found no evidence for such modulation and place an upper limit of 3.0 x 10(exp -3) photon/sq cm.s in the 20-70 keV BATSE energy band , based upon statistical modelling of the signal. EXO2030+375 has exhibited an X-ray active epoch, followed by a quiescent period lasting 2.5yr and since April 1996 has exhibited renewed activity. Previous observations (Reig et a 1998) using RXTE ASM data indicate secondary outbursts occur at apastron passage during the current epoch, but not in the former. We present a lightcurve for the earlier epoch showing convincing evidence for such apastron outbursts. We find apastron outbursts in 3 sources, all having orbital periods greater than 41d. No such signal is conclusively detected in the more rapidly orbiting systems studied.

Laycock, S.↗
NASA NTRS2001

Quantum Dots Based Rad-Hard Computing and Sensors

Quantum Dots (QDs) are solid-state structures made of semiconductors or metals that confine a small number of electrons into a small space. The confinement of electrons is achieved by the placement of some insulating material(s) around a central, well-conducting region. Thus, they can be viewed as artificial atoms. They therefore represent the ultimate limit of the semiconductor device scaling. Additional information is contained in the original extended abstract.

Fijany, A.↗
NASA NTRS2001

A Library of Rad Hard Mixed-Voltage/Mixed-Signal Building Blocks for Integration of Avionics Systems for Deep Space

To build the sensor intensive system-on-a-chip for the next generation spacecrafts for deep space, Center for Integration of Space Microsystems at JPL (CISM) takes advantage of the lower power rating and inherent radiation resistance of Silicon on Insulator technology (SOI). We are developing a suite of mixed-voltage and mixed-signal building blocks in Honeywell's SOI process that can enable the rapid integration of the next generation avionics systems with lower power rating, higher reliability, longer life, and enhanced radiation tolerance for spacecrafts such as the Europa Orbiter and Europa Lander. The mixed-voltage building blocks are predominantly for design of adaptive power management systems. Their design centers around an LDMOS structure that is being developed by Honeywell, Boeing Corp, and the University of Idaho. The mixed-signal building blocks are designed to meet the low power, extreme radiation requirement of deep space applications. These building blocks are predominantly used to interface analog sensors to the digital CPU of the next generation avionics system on a chip. Additional information is contained in the original extended abstract.

Mojarradi, M. M.↗
NASA NTRS2001

A SEU-Hard Flip-Flop for Antifuse FPGAs

A single event upset (SEU)-hardened flip-flop has been designed and developed for antifuse Field Programmable Gate Array (FPGA) application. Design and application issues, testability, test methods, simulation, and results are discussed.

Katz, R.↗
NASA NTRS2002

Getting to L1 the Hard Way: Triana's Launch Options

Over the past four years, NASA's Goddard Space Flight Center has built and tested the Triana observatory, which will be the first Earth observing science satellite to take advantage of the unique perspective offered by a Lissajous orbit about the first Earth-Sun Lagrange Point (L1). Triana was originally meant to fly on the U.S. Space Transportation System (a.k.a. the Space Shuttle but complications with the shuttle manifest have forced Triana into a 'wait and see' attitude. The observatory is currently being stored at NASA's Goddard Space Flight Center, where it waits for an appropriate launch opportunity to surface. To that end, several possible alternatives have been considered, including variations on the nominal shuttle deployment scenario, a high inclination Delta-type launch from Vandenberg Air Force Base, a Tsyklon class vehicle launched from Baikonur, Kazakhstan, and a ride on a French Ariane vehicle out of French Guiana into a somewhat arbitrary geostationary transfer orbit (GTO). This paper chronicles and outlines the pros and cons of how each of these opportunities could be used to send Triana on its way to L1.

Houghton, Martin B.↗
NASA NTRS2002

Getting to L1 the Hard Way: Triana's Launch Options

Over the past four years, NASA's Goddard Space Flight Center has built and tested the Triana observatory, which will be the first Earth observing science satellite to take advantage of the unique perspective offered by a Lissajous orbit about the first Earth-Sun Lagrange Point (L1). Triana was originally meant to fly on the U.S. Space Transportation System (a.k.a. the Space Shuttle), but complications with the shuttle manifest have forced Triana into a "wait and see" attitude. The observatory is currently being stored at NASA's Goddard Space Flight Center, where it waits for an appropriate launch opportunity to materialize. To that end, several possible alternatives have been considered, including variations on the nominal shuttle deployment scenario, a high inclination Delta-type launch from Vandenberg Air Force Base, a Tsyklon class vehicle launched from Baikonur, Kazakhstan, and a ride on a French Ariane vehicle out of French Guiana into a somewhat arbitrary geostationary transfer orbit (GTO). This paper chronicles and outlines the pros and cons of how each of these opportunities could be used to send Triana on its way to L1.

Houghton, Martin B.↗
NASA NTRS2001

The Obscuring Starburst of NGC 6221 and Implications for the Hard X-Ray Background

We present NGC 6221 as a case study of "X-ray-loud composite galaxies," which appear similar to starbursts at optical wavelengths and resemble traditional active galactic nuclei in X-rays. The net optical spectrum of NGC 6221 is properly characterized as a starburst galaxy, but in X-rays, NGC 6221 is similar to Seyfert 1 galaxies, exhibiting a power-law continuum spectrum, a broad Fe K(alpha) line, and continuum variability on timescales of days and years. High-resolution images reveal that the detected active nucleus is relatively weak, not only at optical, but also at near-infrared wavelengths. An obscuring starburst, in which the interstellar gas and dust associated with the starburst conceal the active nucleus, accounts for these peculiar features. We demonstrate quantitatively that obscuration by column density N(sub H) = 10(exp 22)/sq cm combined with relatively weak intrinsic nuclear activity can produce an optical spectrum that is characteristic of the surrounding starburst alone. While optical surveys would not identify the active nuclei that make these galaxies significant X-ray sources, such galaxies may, in fact, be important contributors to the X-ray background.

Levenson, N. A.↗
NASA NTRS2003

Development of High Resolution Hard X-Ray Telescope with Multilayer Coatings

The activities that occurred during the first year of the grant were: a) completed construction of the large multilayer deposition facility; b) Coated a large number of flat substrates and the interiors of cylindrical X-ray telescope shell substrates with uniform period and depth graded periods of tungsten-silicon (W/Is) bi-layers and other coatings; c) studied the influence of various factors affecting the quality of the multilayer coatings by measuring their reflection efficiency at 8 keV and higher energy X-rays.

Gorenstein, Paul↗
NASA NTRS2003

Microcalorimeters with Germanium Thermistors for High Resolution Soft and Hard X-ray Astronomy

This is a progress report for the first year of a three year Space Research and Technology (SR&T) grant to continue the advancement of neutron transmutation doped (NTD-based) microcalorimeters. We have re-prioritized certain aspects of the statement of work and chose to emphasize issues of array development in the first year rather than wait until year two. Consequently, some of the projects scheduled for the first year were delayed to the second year. Here we report on our progress to: a) Build and test a 1 x 4 element array and to investigate electrical and thermal cross-talk; b) Build a multiplexed 4 channel analog pulse processor; c) Build a digital pulse processor that can accommodate 4 channels with independent triggers; d) Develop a proportional thermal baseline restoration system compatible with the constant voltage mode of microcalorimeter operation.

Silver, E.↗
NASA NTRS2002

Large Coded Aperture Mask for Spaceflight Hard X-ray Images

The 2.6 square meter coded aperture mask is a vital part of the Burst Alert Telescope on the Swift mission. A random, but known pattern of more than 50,000 lead tiles, each 5 mm square, was bonded to a large honeycomb panel which projects a shadow on the detector array during a gamma ray burst. A two-year development process was necessary to explore ideas, apply techniques, and finalize procedures to meet the strict requirements for the coded aperture mask. Challenges included finding a honeycomb substrate with minimal gamma ray attenuation, selecting an adhesive with adequate bond strength to hold the tiles in place but soft enough to allow the tiles to expand and contract without distorting the panel under large temperature gradients, and eliminating excess adhesive from all untiled areas. The largest challenge was to find an efficient way to bond the > 50,000 lead tiles to the panel with positional tolerances measured in microns. In order to generate the desired bondline, adhesive was applied and allowed to cure to each tile. The pre-cured tiles were located in a tool to maintain positional accuracy, wet adhesive was applied to the panel, and it was lowered to the tile surface with synchronized actuators. Using this procedure, the entire tile pattern was transferred to the large honeycomb panel in a single bond. The pressure for the bond was achieved by enclosing the entire system in a vacuum bag. Thermal vacuum and acoustic tests validated this approach. This paper discusses the methods, materials, and techniques used to fabricate this very large and unique coded aperture mask for the Swift mission.

Vigneau, Danielle N.↗
NASA NTRS2003

Drinking from the Fire Hose: Why the Flight Management System Can Be Hard to Train and Difficult to Use

The Flight Management Computer (FMC) and its interface, the Multi-function Control and Display Unit (MCDU) have been identified by researchers and airlines as difficult to train and use. Specifically, airline pilots have described the "drinking from the fire-hose" effect during training. Previous research has identified memorized action sequences as a major factor in a user s ability to learn and operate complex devices. This paper discusses the use of a method to examine the quantity of memorized action sequences required to perform a sample of 102 tasks, using features of the Boeing 777 Flight Management Computer Interface. The analysis identified a large number of memorized action sequences that must be learned during training and then recalled during line operations. Seventy-five percent of the tasks examined require recall of at least one memorized action sequence. Forty-five percent of the tasks require recall of a memorized action sequence and occur infrequently. The large number of memorized action sequences may provide an explanation for the difficulties in training and usage of the automation. Based on these findings, implications for training and the design of new user-interfaces are discussed.

Sherry, Lance↗
NASA NTRS2004

The Hard X-Ray and Coordinated Multifrequency Properties of the Blazar 3C279

Upon our successful AO-1 proposal no. 120085, the quasar 3C 279 has been observed in a coordinated multiwavelength campaign, including INTEGRAL, Chandra, and ground-based radio, near-infrared, and optical observations in June 2003. INTEGRAL observed 3C279 continuously for 300 ksec in INTEGRAL AO-1 between June 1 and June 5,2003. In addition, a Chandra pointing of 5 ksec was done on June 2, the Metsiihovi radio telescope contributed high-frequency radio observations, the SEST observed the source at mm wavelengths, and the 80 cm Turola telescope at La Palma and the 2.3 m telescope at Siding Springs, Australia contributed optical observations.

Collmar, W.↗