Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Germanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Absorption and photoluminescence of ternary nanostructured Ge-S-Ga(In)glassy semiconductor systems

The photoluminescence and luminescence excitation spectra and the edge and IR absorption of Ge-S-Ga(In) glassy semiconductor systems are studied. The observed shifts of the optical-absorption edge, photoluminescence spectra (a decrease in their full width at half-maximum), and luminescence excitation spectra to lower energies upon the introduction of Ga or In into Ge-S binary systems are due to the fact that Ga or In tend to interact with sulfur, rather than with germanium. As the content of Ga(In) in the system increases, the intensity of the absorption band associated with vibrations of the Ge-S bond decreases.

36 MATERIALS SCIENCE↗

Quantum self-consistent calculation of the differential capacitance of a semiconductor film

A fast scheme for calculating the surface differential capacitance of a semiconductor film with an ohmic contact on the rear side is proposed within the self-consistent solution of the Schroedinger and Poisson equations. The method is considered using germanium as an example. Comparison with the results of the phenomenological calculation revealed the specifics of size-quantization effects on the capacitance-voltage characteristic of the film.

36 MATERIALS SCIENCE↗

Ge/GeSn heterostructures grown on Si (100) by molecular-beam epitaxy

The growth of GeSn layers by molecular-beam epitaxy on Si (100) wafers coated with a germanium buffer layer is investigated. The properties of the fabricated structures are controlled by reflection high-energy electron diffraction, atomic-force microscopy, X-ray diffractometry, Rutherford backscattering, and Raman scattering. It is shown that GeSn layers with thicknesses up to 0.5 μm and Sn molar fractions up to 0.073 manifest no sign of plastic relaxation upon epitaxy. The lattice constant of the GeSn layers within the growth plane is precisely the same as that of Ge. The effect of rapid thermal annealing on the conversion of metastable elastically strained GeSn layers into a plastically relaxed state is examined. Ge/GeSn quantum wells with Sn molar fraction up to 0.11 are obtained.

36 MATERIALS SCIENCE↗

Terahertz emission upon the band-to-band excitation of Group-IV semiconductors at room temperature

Terahertz emission upon the band-to-band excitation of Group-IV semiconductors (Si:B and Ge:Ga) at room temperature by a semiconductor laser emitting in the visible range (660 nm) is observed and investigated. It is established that, as the crystal temperature is elevated above room temperature, the emission intensity increases considerably, while the emission spectrum shifts to higher frequencies. The terahertz-emission spectra of germanium and silicon are quite similar to each other. The pump-intensity dependence of the terahertz-emission intensity is nearly linear. The above features make it possible to attribute the observed terahertz emission to the effect of crystal heating by absorbed pump radiation.

36 MATERIALS SCIENCE↗

Sn-enriched Ge/GeSn nanostructures grown by MBE on (001) GaAs and Si wafers

Elastically stressed metastable GeSn layers with a tin molar fraction as large as 0.185 are grown on (001) Si and GaAs wafers covered with a germanium buffer layer. A set of wafers with a deviation angle in the range 0°–10° is used. It is established that the GeSn crystal undergoes monoclinic deformation with the angle β to 88° in addition to tetragonal deformation. Misorientation of the wafers surface results in increasing efficiency of the incorporation of tin adatoms into the GeSn crystal lattice. Phase separation in the solid solution upon postgrowth annealing of the structures begins long before the termination of plastic relaxation of elastic heteroepitaxial stresses. Tin released as a result of GeSn decomposition predominantly tends to be found on the surface of the sample. Manifestations of the brittle–plastic mechanism of the relaxation of stresses resulting in the occurrence of microcracks in the subsurface region of the structures under investigation are found.

36 MATERIALS SCIENCE↗

Specific features of the ion-beam synthesis of Ge nanocrystals in SiO{sub 2} thin films

The systematic features of the formation of Ge nanocrystals in SiO{sub 2} thin films implanted with Ge{sup +} ions and then subjected to high-temperature annealing (1130°C) are studied in relation to hydrostatic pressure. It is established that annealing at atmospheric pressure is accompanied by the diffusion of Ge atoms from the implantation region to the Si substrate and does not induce the formation of Ge nanocrystals. An increase in pressure during annealing yields a deceleration in the diffusion of germanium into silicon and is accompanied by the formation of twinned lamellae at the Si/SiO{sub 2} interface (at pressures of ~10{sup 3} bar) or by the nucleation and growth of Ge nanocrystals (at pressures of ~10{sup 4} bar) in the SiO{sub 2} film. The results are discussed on the basis of the concept of a change in the activation volume of the formation and migration of point defects under conditions of compression.

36 MATERIALS SCIENCE↗

Local Anodic Oxidation of Thin GeO Films and Formation of Nanostructures Based on Them

The process of local anodic oxidation of thin GeO films has been studied using an atomic force microscope. The electron-probe microanalysis showed that oxidized areas of a GeO film were germanium dioxide. The effect of the voltage pulse duration applied to the probe–substrate system and the atmospheric humidity on the height of the oxide structures has been studied. The kinetics of the local anodic oxidation (LAO) in a semi-contact mode obeys the Cabrera–Mott model for large times. The initial growth rate of the oxide (R{sub 0}) significantly increases and the time of starting the oxidation (t{sub 0}) decreases as the atmospheric humidity increases by 20%, which is related to an increase in the concentration of oxygen-containing ions at the surface of the oxidized GeO film. It was shown that nanostructures in thin GeO layers can be formed by the LAO method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamic Instability of Solid Surfaces under Load

The mechanism of dynamic instability of a solid surface under a load, determined by perturbations of the electron density and the change in the interatomic interaction, is considered. This instability is manifested upon the excitation of dynamic displacements of atoms in the surface layer, which can lead to formation of finite-lifetime structures in the form of waves with a large amplitude. Such structures were earlier observed experimentally on a stretched germanium (111) surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Model of a SiGe 130-nm 10- to 30-GHz Chaotic Self-Oscillating System

The problem of generation of utlrawideband chaotic oscillations in the frequency range of 10–30 GHz is considered. This problem is relevant to fifth-generation communication systems. A generator model designed for the silicon–germanium 130-nm process technology is proposed and studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Change in the Debye Temperature of a Single-Component Substance upon Amorphization

A method for calculating the Debye temperature of a single-component substance in the amorphous state is proposed based on a nonlinear dependence of first coordination number k{sub n} of the given structure on its packing factor k{sub p} as established previously. Proceeding from previously defined parameters of the Mie–Lennard-Jones potential, the Debye temperatures have been calculated for some pure crystalline and amorphous metals, diamond, silicon, and germanium, which are in good agreement with estimations reported by other researchers. It is shown that a minimum specific Helmholtz free energy is attained at k{sub p} = 0.45556, which means that this packing corresponds to a thermodynamically stable amorphous structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Dopant Size and Dopant Concentration on the Crystallization Pressure of Phase Change Materials: The Role of Local Order and Non-local Interactions

Ge{sub 0.15}Sb{sub 0.85} is a phase change material that undergoes a transition from a semi-conducting glass to a crystalline metal when being densified. In this work, we investigate some parameters controlling the crystallization pressure P{sub c} in related compounds by conducting high-pressure experiments on initially amorphous, germanium- and silicon-doped antimony. We find that the amorphous phase is stabilized to higher pressures when the dopant size is decreased. This result can be easily rationalized under the assumption that in the glass, Ge and Si atoms occupy tetrahedral or related small coordination shells. When pressure increases, the larger Ge atoms move sooner into the larger octahedral shells, which are characteristic for the crystal, than the smaller Si atoms do. We also find that P{sub c} increases quickly with Ge and Si concentrations. This observation implies that the pressure-induced change of coordination cannot be a local, elementary event, but that the four-coordination of the group-14 atoms is stabilized by the presence of other four-coordinated atoms.

36 MATERIALS SCIENCE↗

Ore Deposits Mined for Critical Elements

Summary of deposit types containing critical elements, including, cobalt, gallium, germanium, indium, niobium, PGE, REE, rhenium, selenium, and tellurium. Includes information about ore deposit type, mineralogy, geologic setting, example deposits and districts, concentration ranges per reported resource, grade, and additional deposit notes. References are also included.

15 GEOTHERMAL ENERGY↗

Biaxial texturing of inorganic photovoltaic thin films using low energy ion beam irradiation during growth

We describe our efforts to control the grain boundary alignment in polycrystalline thin films of silicon by using a biaxially textured template layer of CaF{sub 2} for photovoltaic device applications. We have chosen CaF{sub 2} as a candidate material due to its close lattice match with silicon and its suitability as an ion beam assisted deposition (mAD) material. We show that the CaF{sub 2} aligns biaxially at a thickness of {approx}10 nm and, with the addition of an epitaxial CaF{sub 2} layer, has an in-plane texture of {approx}15{sup o}. Deposition of a subsequent layer of Si aligns on the template layer with an in-plane texture of 10.8{sup o}. The additional improvement of in-plane texture is similar to the behavior observed in more fully characterized IBAD materials systems. A germanium buffer layer is used to assist in the epitaxial deposition of Si on CaF{sub 2} template layers and single crystal substrates. These experiments confirm that an mAD template can be used to biaxially orient polycrystalline Si.

36 MATERIALS SCIENCE↗

Development of a Portable Muon Witness System

Since understanding and quantifying cosmic ray induced radioactive backgrounds in copper and germanium are important to the MAJORANA DEMONSTRATOR, methods are needed for monitoring the levels of such backgrounds produced in materials being transported and processed for the experiment. This report focuses on work conducted at Pacific Northwest National Laboratory to develop a muon witness system as a one way of monitoring induced activities. The operational goal of this apparatus is to characterize cosmic ray exposure of materials. The cosmic ray flux at the Earth’s surface is composed of several types of particles, including neutrons, muons, gamma rays and protons. These particles induce nuclear reactions, generating isotopes that contribute to the radiological background. Underground, the main mechanism of activation is by muon produced spallation neutrons since the hadron component of cosmic rays is removed at depths greater than a few tens of meters. This is a sub-dominant contributor above ground, but muons become predominant in underground experiments. For low-background experiments cosmogenic production of certain isotopes, such as 68Ge and 60Co, must be accounted for in the background budgets. Muons act as minimum ionizing particles, depositing a fixed amount of energy per unit length in a material, and have a very high penetrating power. Using muon flux measurements as a “witness” for the hadron flux, the cosmogenic induced activity can be quantified by correlating the measured muon flux and known hadronic production rates. A publicly available coincident muon cosmic ray detector design, the Berkeley Lab Cosmic Ray Detector (BLCRD), assembled by Juniata College, is evaluated in this work. The performance of the prototype is characterized by assessing its muon flux measurements. This evaluation is done by comparing data taken in identical scenarios with other cosmic ray telescopes. The prototype is made of two plastic scintillator paddles with associated electronics to measure energy depositions in coincidence in the two paddles. For this particular application of the prototype, the measurements performed concentrated on a broad investigation of the dependence of the muon flux on depth underground. These tests were conducted inside at Building 3420/1307 and underground at Building 3425 at the Pacific Northwest National Laboratory. The second half of this report analyzes modifications to the electronics of the BLCRD to make this detector portable. Among other modifications, a battery powered version of these electronics is proposed for the final Muon Witness design.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Majorana One-Tonne Cryostat Cooling Conceptual Feasibility Study Rev 1

This report evaluates the conceptual plans for a cryostat cooling design for the MAJORANA DEMONSTRATOR (MJD) one-tonne (S4) experiment. This document is based upon previous design work and experimental results used to evaluate the current MJD thermal design. A feasibility study of a cooling system for S4 based on the MJD thermosiphon experiment is presented. The one-tonne experiment will be a scaled up version of the MJD. There will be many cryostats in the S4 experiment. In this document a cryostat with up to 19 strings of germanium crystals is analyzed. Aside from an extra outer ring of crystals, the geometry of the cryostat for S4 is very similar to that for the MJD thermosiphon experiment. The materials used in the fabrication of both of these ultra-low background experiments will be underground-electroformed copper. The current MJD uses a two-phase liquid-gas cooling system to provide constant operating temperature. This document presents a theoretical investigation of a cooling system for the S4 experiment and evaluates the heat transfer performance requirements for such a system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MARS Flight Engineering Status

The Multi-sensor Airborne Radiation Survey Flight Engineering project (MARS FE) has designed a high purity germanium (HPGe) crystal array for conducting a wide range of field measurements. In addition to the HPGe detector system, a platform-specific shock and vibration isolation system and environmental housing have been designed to support demonstration activities in a maritime environment on an Unmanned Surface Vehicle (USV). This report describes the status of the equipment as of the end of FY09.

33 ADVANCED PROPULSION SYSTEMS↗

Cosmic Ray Interactions in Shielding Materials

This document provides a detailed study of materials used to shield against the hadronic particles from cosmic ray showers at Earth’s surface. This work was motivated by the need for a shield that minimizes activation of the enriched germanium during transport for the MAJORANA collaboration. The materials suitable for cosmic-ray shield design are materials such as lead and iron that will stop the primary protons, and materials like polyethylene, borated polyethylene, concrete and water that will stop the induced neutrons. The interaction of the different cosmic-ray components at ground level (protons, neutrons, muons) with their wide energy range (from kilo-electron volts to giga-electron volts) is a complex calculation. Monte Carlo calculations have proven to be a suitable tool for the simulation of nucleon transport, including hadron interactions and radioactive isotope production. The industry standard Monte Carlo simulation tool, Geant4, was used for this study. The result of this study is the assertion that activation at Earth’s surface is a result of the neutronic and protonic components of the cosmic-ray shower. The best material to shield against these cosmic-ray components is iron, which has the best combination of primary shielding and minimal secondary neutron production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

N-1: Safeguards Science and Technology Group, Tour Areas

Group N-1 develops and provides training on nondestructive assay (NDA) technologies intended for nuclear material accounting and control to fulfill both international and domestic obligations. The N-1 group is located at Technical Area (TA)-35 in Buildings 2 and 27. Visitors to the area can observe developed and fielded NDA technologies, as well as the latest research efforts to develop the next generation of NDA technologies. Several areas are used for NDA training. The N-1 School House area typically is used for basic training on neutron- and gamma-ray-based NDA techniques. This area contains an assortment of gamma-ray detector systems, including sodium iodide and high-purity germanium and the associated measurement components. Many types of neutron assay systems are located here, including both standard coincidence and multiplicity counters. The N-1 School House area is also used for holdup training; located here are the mock holdup assemblies and associated holdup measurement tools. Other laboratory areas in the N-1 space are used for specialized training, such as waste NDA, calorimetry, and advanced gamma-ray NDA. Also, many research laboratories in the N-1 space are used to develop new NDA technologies. The calorimetry laboratory is used to develop and evaluate new technologies and techniques that measure the heat signature from nuclear material to determine mass. The micro calorimetry laboratory is being used to develop advanced technologies that can measure gamma rays with extremely high resolution. This technique has been proven in the laboratory setting, and the team is now working to cultivate a field-capable system. The N-1 group also develops remote and unattended systems for the tracking and control of nuclear material. A demonstration of this technology is located within one of the laboratory spaces. The source tracker software was developed by N-1 to monitor the locations and quantities of nuclear materials. This software is currently used to track N-1's nuclear material and is available for demonstration.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗