Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Generative Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

The design of asymmetric 4 pi shields for space reactors

A one dimensional shield optimization program based on the method of discrete ordinates has been developed and is used to determine material thicknesses used in asymmetric 4 pion shields for space power reactors. The two dimensional discrete ordinates program DOT is used to check the design, and the information generated in the DOT calculation is used as a guide in shaping the shield which may be considered a first step in two dimensional shield optimization.

Engle, W. W., Jr.↗

Some extemporaneous comments on our experiences with towers for wind generators

A wind generator tower must be designed to withstand fatigue forces and gust winds loads. Optimum tower height depends on the energy cost to the customer because an increase in height results in an increase in the cost of the plant. It is suggested that costs are minimum for the shortest tower possible and that the rotor should be as large as possible.

Hutter, U.↗

Scout fourth stage attitude and velocity control (AVC) system feasibility study

The feasibility of incorporating a guidance system in the Scout fourth stage to achieve a significant improvement in expected payload delivery accuracy is studied. The technical investigations included the determination of the AVC equipment performance requirements, establishment of qualification and acceptance test levels, generation of layouts illustrating design approaches for the upper D and payload transition sections to incorporate the hardware, and the preparation of a vendor bid package. Correction concepts, utilizing inertial velocity and attitude, were identified and evaluated. Fourth stage attitude adjustments as determined from inertial velocity variation through the first three stages and a final velocity correction based upon the measured in-plane component errors at injection were employed. Results show radical reductions in apogee-perigee deviations.

Byars, L. B.↗

Analysis of a Multiprocessor Guidance Computer

The design of the next generation of spaceborne digital computers is described. It analyzes a possible multiprocessor computer configuration. For the analysis, a set of representative space computing tasks was abstracted from the Lunar Module Guidance Computer programs as executed during the lunar landing, from the Apollo program. This computer performs at this time about 24 concurrent functions, with iteration rates from 10 times per second to once every two seconds. These jobs were tabulated in a machine-independent form, and statistics of the overall job set were obtained. It was concluded, based on a comparison of simulation and Markov results, that the Markov process analysis is accurate in predicting overall trends and in configuration comparisons, but does not provide useful detailed information in specific situations. Using both types of analysis, it was determined that the job scheduling function is a critical one for efficiency of the multiprocessor. It is recommended that research into the area of automatic job scheduling be performed.

Maltach, E. G.↗

Electrochemical carbon dioxide concentrator advanced technology tasks

Technology advancement studies are reported on the basic electrochemical CO2 removal process to provide a basis for the design of the next generation cell, module and subsystem hardware. An Advanced Electrochemical Depolarized Concentrator Module (AEDCM) is developed that has the characteristics of low weight, low volume, high CO2, removal, good electrical performance and low process air pressure drop. Component weight and noise reduction for the hardware of a six man capacity CO2 collection subsystem was developed for the air revitalization group of the Space Station Prototype (SSP).

Schneider, J. J.↗

Mariner Jupiter/Saturn LCSSE thruster/valve assembly and injection propulsion unit rocket engine assemblies: 0.2-lbf T/VA development and margin limit test report

Thruster valve assemblies (T/VA's) were subjected to the development test program for the combined JPL Low-Cost Standardized Spacecraft Equipment (LCSSE) and Mariner Jupiter/Saturn '77 spacecraft (MJS) programs. The development test program was designed to achieve the following program goals: (1) demonstrate T/VA design compliance with JPL Specifications, (2) to conduct a complete performance Cf map of the T/VA over the full operating range of environment, (3) demonstrate T/VA life capability and characteristics of life margin for steady-state limit cycle and momentum wheel desaturation duty cycles, (4) verification of structural design capability, and (5) generate a computerized performance model capable of predicting T/VA operation over pressures ranging from 420 to 70 psia, propellant temperatures ranging from 140 F to 40 F, pulse widths of 0.008 to steady-state operation with unlimited duty cycle capability, and finally predict the transient performance associated with reactor heatup during any given duty cycle, start temperature, feed pressure, and propellant temperature conditions.

Clark, E. C.↗

A model-based analysis of a display for helicopter landing approach

A control theoretic model of the human pilot was used to analyze a baseline electronic cockpit display in a helicopter landing approach task and to generate display quickening laws designed to improve pilot-vehicle performance. A simple fixed base simulation provided comparative tracking data which allowed refinement of the pilot model.

Hess, R. A.↗

Quantitative three-dimensional dynamic imaging of structure and function of the cardiopulmonary and circulatory systems in all regions of the body

The background for, and design of a third generation, general purpose, all electronic spatial scanning system, the DSR is described. Its specified performance capabilities provide dynamic and stop action three dimensional spatial reconstructions of any portion of the body based on a minimum exposure time of 0.01 second for each 28 multiplanar 180 deg scanning set, a maximum scan repetition rate of sixty 28 multiplane scan sets per second, each scan set consisting of a maximum of 240 parallel cross sections of a minimum thickness of 0.9 mm, and encompassing a maximum cylindrical volume about 23 cm in length and up to 38 cm in diameter.

Sturm, R. E.↗

A lightweight solar array study

A sample module was assembled to model a portion of a flexible extendable solar array, a type that promises to become the next generation of solar array design. The resulting study of this module is intended to provide technical support to the array designer for lightweight component selection, specifications, and tests. Selected from available lightweight components were 127-micron-thick wrap-around contacted solar cells, 34- micron-thick sputtered glass covers, and as a substrate a 13-micron-thick polyimide film clad with a copper printed circuit. Each component displayed weaknesses. The thin solar cells had excessive breakage losses. Sputtered glass cover adhesion was poor, and the covered cell was weaker than the cell uncovered. Thermal stresses caused some cell delamination from the model solar array substrate.

Josephs, R. H.↗

Wind tunnel flow seeding for laser velocimetry applications

Flow-seeding requirements for wind tunnel studies of subsonic and transonic flow fields are discussed with reference to laser velocimeter applications. Design of an aerosol generator with an output flow rate of 60 scfm is presented. The generated aerosol is fairly monodisperse; tracer particle diameter can be varied from 0.2 to 0.5 micron; and seeding density can be varied from 100 to 10,000 particles/cu sec. Experimental data on the use of this aerosol generator with various aerosol injection mechanisms indicate that the method is suitable for wind tunnel flow seeding.

Mazumder, M. K.↗

Air terminals and liquid hydrogen commercial air transports

An initial appraisal is made of results of two studies of the ground requirements of liquid hydrogen (LH2) air transports. Each hypothesized the use of a 400-passenger 5500 nautical mile range subsonic commercial LH2 transport. Two of the world's busiest commercial airports, Chicago O'Hare International and San Francisco International, were selected for study. The current and predicted wide-body traffic at these airports was assumed to simulate the LH2 transport traffic at these airports in the 1990-1995 time period. Both studies produced conceptual designs for facilities to generate the required quantities of fuel from pipeline gaseous hydrogen and to deliver liquid hydrogen to the airplanes. Although the LH2 and jet fuel facilities were kept apart, both study teams found it practical to converge the fuel supply lines so that with proper safety and operational procedures and specialized LH2 equipment both LH2 and jet fuel transports can use common ramp and gate facilities.

Korycinski, P. F.↗

Advanced solar thermal receiver technology

Development of advanced receiver technology for solar thermal receivers designed for electric power generation or for industrial applications, such as fuels and chemical production or industrial process heat, is described. The development of this technology is focused on receivers that operate from 1000 F to 3000 F and above. Development strategy is mapped in terms of application requirements, and the related system and technical requirements. Receiver performance requirements and current development efforts are covered for five classes of receiver applications: high temperature, advanced Brayton, Stirling, and Rankine cycle engines, and fuels and chemicals.

Kudirka, A. A.↗

Concepts for design of an energy management system incorporating dispersed storage and generation

New forms of generation based on renewable resources must be managed as part of existing power systems in order to be utilized with maximum effectiveness. Many of these generators are by their very nature dispersed or small, so that they will be connected to the distribution part of the power system. This situation poses new questions of control and protection, and the intermittent nature of some of the energy sources poses problems of scheduling and dispatch. Under the assumption that the general objectives of energy management will remain unchanged, the impact of dispersed storage and generation on some of the specific functions of power system control and its hardware are discussed.

Kirkham, H.↗

Design, development, performance, and reconditioning of Ni-Cd batteries using polyropylene separators

A performance assessment is made for the Viking Mars Lander Program's sealed, sterilizable, 8-ampere hour Ni-Cd batteries, which use a nonwoven polypropylene separator material. Attention is given to separator wettability, the optimization of electrolyte quantity, and the reduction of plate carbonate, in view of thermal considerations and other environmental design and test requirements generated by mission characteristics. Life data based on mission experience identify, in addition to performance and degradation behavior, a series of shallow discharge reconditioning cycles and an intensive program of deep discharge reconditioning.

Britting, A. O., Jr.↗

Lox/hydrocarbon propellants for space propulsion systems

The significant results of technology efforts directed by the NASA Lyndon B. Johnson Space Center investigating liquid oxygen/hydrocarbon (lox/HC) propellant combination are presented. These efforts are intended to identify viable propellant combinations and system designs to replace nitrogen tetroxide and monomethylhydrazine for future spacecraft orbital maneuvering and attitude control systems, and to date have been focused primarily on the various technology areas of lox/HC combustion - injector element design effects, performance, combustion chamber heat transfer, coking, and ignition. In addition, a study was performed to compare candidate lox/HC propulsion system concepts and to evaluate major system/component design options. The data generated provide quantitative substantiation of trends previously experienced with hypergolic propellants and with a lox and rocket propellant combination. More importantly, however, the data provide a sound footing for the technology data base that must be built to support future systems development.

Boyd, W. C.↗

Direct model reference adaptive control of a flexible robotic manipulator

Quick, precise control of a flexible manipulator in a space environment is essential for future Space Station repair and satellite servicing. Numerous control algorithms have proven successful in controlling rigid manipulators wih colocated sensors and actuators; however, few have been tested on a flexible manipulator with noncolocated sensors and actuators. In this thesis, a model reference adaptive control (MRAC) scheme based on command generator tracker theory is designed for a flexible manipulator. Quicker, more precise tracking results are expected over nonadaptive control laws for this MRAC approach. Equations of motion in modal coordinates are derived for a single-link, flexible manipulator with an actuator at the pinned-end and a sensor at the free end. An MRAC is designed with the objective of controlling the torquing actuator so that the tip position follows a trajectory that is prescribed by the reference model. An appealing feature of this direct MRAC law is that it allows the reference model to have fewer states than the plant itself. Direct adaptive control also adjusts the controller parameters directly with knowledge of only the plant output and input signals.

Meldrum, D. R.↗

Acoustic treatment of the NASA Langley 4- by 7-meter tunnel: A feasibility study

A feasibility study for upgrading the NASA Langley 4- by 7-Meter Tunnel so that it may be used for aeroacoustic research related to helicopters is described. The requirements for noise research leading to the design of the next generation of helicopters impose a set of acoustic test criteria that no existing wind tunnel in the United States can presently meet. Included in this feasibility study are the following considerations: (1) an evaluation of general wind-tunnel requirements and desired tunnel background noise levels for helicopter aeroacoustic research; (2) an assessment of the present acoustic environment for testing model rotors; (3) a diagnostic investigation of tunnel background noise sources and paths; (4) acoustic treatment options for tunnel background noise reduction and a trade-off study between these options; (5) an engineering feasibility assessment of the selected option; and (6) an integrated analysis of study components and recommendations of treatment for an approach to meet the tunnel background noise reduction goal. It is concluded that the Langley 4- by 7-Meter Tunnel is a fundamentally suitable facility for helicopter aeroacoustic research. It is also concluded that acoustic treatment of this facility for meeting the required tunnel background noise goal can be accomplished technically at reasonable risk and cost.

Yu, J. C.↗

NASA applications for acousto-optic spectrometers

Small, compact, and rugged IF spectrometers are needed in high resolution heterodyne receivers designed for a new generation of space-borne telescopes planned for the next decade. Acousto-optic Spectrometers (AOS) promise to provide the necessary bandwidth and resolution in a package which is compact, power efficient, and ruggedized for space applications. Sensitivity, linearity, and stability are the primary goals of an astronomical receiver and these features must be demonstrated in order for an AOS to be accepted in place of more conventional RF or digital technology.

Chin, G.↗