SEARCH · Engineering Papers

Results for “GUIDANCE AND CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

All sources NASA NTRS DOE OSTI

NASA NTRS1977

The Space Telescope

The Space Telescope is a NASA program intended to launch a long-lived 2.4 meter astronomical observatory in 1983. It will contain optical and pointing systems producing a resolution of at least 0.1 arc seconds over periods of 10 hours. This capability will allow a new regime of imaging astronomical observations to be undertaken from below Lyman-alpha to the millimeter wavelength range. The optical, optical metering structure, pointing and guidance system, and control system will be described.

Odell, C. R.↗

NASA NTRS1977

Sail GTS ground system analysis: Avionics system engineering

A comparison of two different concepts for the guidance, navigation and control test set signal ground system is presented. The first is a concept utilizing a ground plate to which crew station, avionics racks, electrical power distribution system, master electrical common connection assembly and marshall mated elements system grounds are connected by 4/0 welding cable. An alternate approach has an aluminum sheet interconnecting the signal ground reference points between the crew station and avionics racks. The comparison analysis quantifies the differences between the two concepts in terms of dc resistance, ac resistance and inductive reactance. These parameters are figures of merit for ground system conductors in that the system with the lowest impedance is the most effective in minimizing noise voltage. Although the welding cable system is probably adequate, the aluminum sheet system provides a higher probability of a successful system design.

Lawton, R. M.↗

NASA NTRS1978

Automatic flight performance of a transport airplane on complex microwave landing system paths

During this demonstration the microwave landing system was utilized to provide the terminal configured vehicle B-737 airplane with guidance for automatic control on complex, curved descending paths with precision turns into short final approaches terminating in landing and roll-out, even when subjected to strong and gusty tail- and cross-wind components and severe wind shear. The data collected from more than fifty approach flights during the demonstration provided an opportunity to analyze airplane flight performance on a statistical basis rather than on a single flight record basis as is customarily done with limited data replication. Mean and standard deviation data are presented for approach flight path tracking parameters. In addition, the adverse wind conditions encountered during these flights are described using three-dimensional wind vector characteristics computed from the extensive on-board sensor data.

Walsh, T. M.↗

NASA NTRS1979

Aerocapture - A system design for planetary exploration

The paper presents the results of a study that developed conceptual designs of an atmospheric entry system with moderate to high L/D ratios to establish the concepts of aerocapture into low circular Mars orbits from hyperbolic flyby trajectories. The payloads considered in this study were those currently conceived for the Mars Sample Return (MSR) mission including single mission (SM) and multi-mission (MM) modes. The design concepts developed are also applicable (with small modification) for establishment of closed orbits about Venus and Saturn. The MSR mission payload requires an orbiter, lander, ascent vehicle, and rover, with a total mass of approximately 4000 kg. The emphasis during the study was placed on development of concepts for aerodynamic configuration, the aeroshell design, and a guidance, navigation, and control subsystem.

Cruz, M. I.↗

NASA NTRS1980

IUS guidance algorithm gamma guide assessment

The Gamma Guidance Algorithm which controls the inertial upper stage is described. The results of an independent assessment of the algorithm's performance in satisfying the NASA missions' targeting objectives are presented. The results of a launch window analysis for a Galileo mission, and suggested improvements are included.

Bray, R. E.↗

NASA NTRS1980

MCC level C formulation requirements. Shuttle TAEM targeting

The level C requirements for the shuttle orbiter terminal area energy management (TAEM) guidance and flight control functions to be incorporated into the Mission Control Center entry profile planning processor are described. This processor is used for preentry evaluation of the entry through landing maneuvers, and includes a simplified three degree-of-freedom model of the body rotational dynamics that is necessary to account for the effects of attitude response on the trajectory dynamics. This simulation terminates at TAEM-autoland interface.

Carman, G. L.↗

NASA NTRS1980

Approach to Sounding on the VAS Processor

The key features of the sounding software laboratory being installed on the VAS Processor at NASA/GSFC are outlined. Emphasis is on the support data and personal guidance that a meteorological researcher must provide to attune a physically modeled VAS sounding to his experiment. The fundamental aim of the sounding-support effort is to provide a system which makes use of: radiation transfer models based upon laboratory data, analytic inversion schemes, human guidance for quality control, statistically conditioned retrieval methods, and current ancillary data.

Chesters, D.↗

NASA NTRS1981

Verification of the Space Shuttle entry GN&C system

The certification procedures for the initial Shuttle flight are discussed. Particular attention is paid to the entry guidance, navigation, and control (GNC) verification, comprising tests, analysis, demonstration, inspection, and simulation. Flow diagrams for the verification and operational flight sequences are provided, along with a block diagram of the GNC circuitry interfaces. The development of the test matrix software for the GNC is outlined, noting the constant interplay between software verification and spacecraft reconfiguration to meet simulated performance requirements. Comparison of GNC performance predictions with actual entry flight data showed a good match in all performance areas except for sideslip excursions, bank overshoots, an area of transonic buffet, and an increased lift/drag ratio in the preflare to landing flight phase.

Van Hoften, J. D. A.↗

NASA NTRS1982

Evaluation of the Shuttle GN&C during powered ascent flight phase

An overview of the ascent trajectory and GN&C (guidance, navigation, and control) system design is followed by a summary of flight test results for the ascent phase of STS-1. The most notable variance from nominal pre-flight predictions was the lofted trajectory observed in first stage due to an unanticipated shift in pitch aerodynamic characteristics from those predicted by wind tunnel tests. The GN&C systems performed as expected on STS-1 throughout powered flight. Following a discussion of the software constants changed for Flight 2 to provide adequate performance margin, a summary of test results from STS-2 and STS-3 is presented. Vehicle trajectory response and GN&C system behavior were very similar to STS-1. Ascent aerodynamic characteristics extracted from the first two test flights were included in the data base used to design the first stage steering and pitch trim profiles for STS-3.

Olson, L.↗

NASA NTRS1982

Shuttle navigation overview

Space Shuttle onboard navigation system tasks are related to position and velocity determination, attitude determination, sensor management, sensor Redundancy Management (RM), and navigation-related functions such as transformations, timing system utilization, and user processing for displays, guidance, and flight control. It is pointed out that Shuttle navigation is different in at least two areas from previous manned space flight navigation. The differences are related to the use of multiple units to provide protection from increased risk of failure of off-the-shelf-type equipment used for more than one flight, and the need to land at a runway. Attention is given to the navigation sensor system, the Shuttle Inertial Measurement Units, the Shuttle Star Tracker, the Crew Optical Alinement Sight, the Shuttle Tacan, the Air Data Subsystem, and aspects of navigation system mechanization.

Savely, R. T.↗

NASA NTRS1982

Redundancy management of the Space Shuttle inertial measurement units

A description is given of the inertial measurement unit (IMU) redundancy management (RM) techniques for automatic in-flight monitoring of inertial instrument performance by the Space Shuttles primary onboard guidance, navigation, and control computers. The techniques and rationale for detecting and identifying faulty instruments are discussed. Special attention is given to the design philosophy, thresholds, and error propagation characteristics of the IMU RM system. The derivation of thresholds is described from the viewpoint of reliability and the safety of the vehicle and crew.

Thibodeau, J. R.↗

NASA NTRS1982

Shuttle entry GN&C performance during STS-1 and STS-2

Data obtained during the entry segment of the descent phase of the flights are analyzed. The nominal entry profile is defined and a description is given of the guidance, navigation, and control subsystem. Emphasis is placed on the stability and control problems encountered during STS-1 and to the changes made in response to these anomalies. These are: (1) the first roll maneuver was done manually at a reduced roll rate; (2) the nominal elevator position was changed from one degree up to one degree down for Mach numbers greater than 12 to reduce the heat load on the body flap; (3) the pilot was directed to execute small roll maneuvers at dynamic pressures of 4, 8, and 18 psf to help determine the roll moment from the aft yaw jets; (4) the planned test inputs in the transonic region were reduced in magnitude; and (5) the targeted touchdown point was moved 500 feet closer to the runway threshold.

Mcwhorter, L. B.↗

NASA NTRS1980

Helicopter technology benefits and needs. Volume 2: Appendices

Vehicle design, avionics and flight systems; safety and reliability; navigation, guidance and flight control; propulsion; auxiliary systems; human factors; and monitoring and diagnostic systems are the technology areas involved in solving operational and technical problems related to the use of helicopters. Tables show the problems encountered and the proposed research and technology for helicopter use for search and rescue; emergency medical services; law enforcement; environmental control; fire fighting; and resource management.

Zuk, J.↗

NASA NTRS1983

Shuttle Performance: Lessons Learned, part 1

Beginning with the first orbital flight of the Space Shuttle, a great wealth of flight data became available to the aerospace community. These data were immediately subjected to analyses by several different groups with different viewpoints and motivations. The results were collected and presented in several papers in the subject areas of ascent and entry aerodynaics; guidance, navigation, and control; aerothermal environment prediction; thermal protection systems; and measurement techniques.

James P Arrington↗

NASA NTRS1983

Shuttle ascent GN&C postflight results

The key features of the ascent and Guidance navigation, and control (GN and C) system are discussed. How well this system performed during the orbital flight test program is examined. Flight results are compared with preflight predictions and postflight reconstructions. Variations from expected performance are identified as well as flight-to-flight trends. The most notable variation was the lofted trajectory observed on the Space Transportation System 1 flight. The lessons learned from the orbital flight test program are being used to enhance the overall system performance for future Shuttle flights. Several of the planned GN and C system enhancements are discussed.

Mcswain, G.↗

NASA NTRS1983

The calibration and flight test performance of the space shuttle orbiter air data system

The Space Shuttle air data system (ADS) is used by the guidance, navigation and control system (GN&C) to guide the vehicle to a safe landing. In addition, postflight aerodynamic analysis requires a precise knowledge of flight conditions. Since the orbiter is essentially an unpowered vehicle, the conventional methods of obtaining the ADS calibration were not available; therefore, the calibration was derived using a unique and extensive wind tunnel test program. This test program included subsonic tests with a 0.36-scale orbiter model, transonic and supersonic tests with a smaller 0.2-scale model, and numerous ADS probe-alone tests. The wind tunnel calibration was further refined with subsonic results from the approach and landing test (ALT) program, thus producing the ADS calibration for the orbital flight test (OFT) program. The calibration of the Space Shuttle ADS and its performance during flight are discussed in this paper. A brief description of the system is followed by a discussion of the calibration methodology, and then by a review of the wind tunnel and flight test programs. Finally, the flight results are presented, including an evaluation of the system performance for on-board systems use and a description of the calibration refinements developed to provide the best possible air data for postflight analysis work.

Dean, A. S.↗

NASA NTRS1983

Space Station needs, attributes and architectural options. Volume 2, book 2, part 1: Mission implementation concepts

The overall configuration and modules of the initial and evolved space station are described as well as tended industrial and polar platforms. The mass properties that are the basis for costing are summarized. User friendly attributes (interfaces, resources, and facilities) are identified for commercial; science and applications; industrial park; international participation; national security; and the external tank option. Configuration alternates studied to determine a baseline are examined. Commonality for clustered 3-man and 9-man stations are considered as well as the use of tethered platforms. Requirements are indicated for electrical, communication and tracking; data management Subsystem requirements for electrical, data management, communication and tracking, environment control/life support system; and guidance navigation and control subsystems are identified.

Source record↗

NASA NTRS1984

Aeronautics Technology Possibilities for 2000: Report of a workshop

The potential of aeronautical research and technology (R&T) development, which could provide the basis for facility planning and long range guidance of R&T programs and could establish justification for support of aeronautical research and technology was studied. The projections served specific purposes: (1) to provide a base for research and future facilities needed to support the projected technologies, and development advanced vehicles; (2) to provide insight on the possible state of the art in aeronautical technology by the year 2000 for civil and military planners of air vehicles and systems. Topics discussed include: aerodynamics; propulsion; structures; materials; guidance, navigation and control; computer and information technology; human factors; and systems integration.

Source record↗