Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Beneficial use of coal combustion products continues to grow

In August 2007 the American Coal Ash Association (ACAA) released results of the Coal Combustion Products Production (CCP) and use survey. Production was 124,795,000 tons while beneficial use was 54,203,000 tons, a utilization rate of over 43%, 3% higher than in 2005. The article includes graphs of 40 years of CCP production and use and projected trade of CCP utilization until 2011. It also gives 2006 figures for Production and use of fly ash, bottom ash, boiler slag, FGD gypsum and other FGD products, and FBC ash. 3 refs., 3 figs.

01 COAL, LIGNITE, AND PEAT↗

Follow that mercury!

The article discusses one technology option for avoiding release of mercury captured by power plant pollution control equipment in order to render it usable in concrete. This is the use of selective catalytic reduction for NOx control and lime spray dryer absorbers (SDA) for SO{sub 2} control prior to particulate collection by fabric filters. In this scenario all mercury removed is trapped in the fabric filter baghouse. The US EPA did not establish mercury emission limits for existing cement plants in the latest regulation 40 CFR 63, Subpart LLL (December 2006) and was sued by the Portland Cement Association because of the Hg limits established for new kilns and by several states and environmental groups for the lack of limits on existing ones. A full version of this article is available on www.acaa-usa.org/AshatWork.htm. 2 figs.

01 COAL, LIGNITE, AND PEAT↗

Utilizing fly ash particles to produce low-cost metal matrix composites

Metal matrix composites (MMCs) are a blend of fine ceramic particles mixed with metals such as aluminium or magnesium. Fly ash is considerably cheaper than ceramics; aluminium-fly ash composites cost less than 60% of conventional aluminium-SiC composites making them attractive to automakers striving for lower weight and cheaper materials for brake rotors or brake drums. Ultalite.com has consulted with US researchers to to find the optimum requirements of the fly ash needed to make MMCs. Particle size 20-40 microns, low calcium oxide content and spherical particles were identified. The desired particles once extracted are stirred into molten aluminum and the resulting composite is into ingots for shipment to a casting facility. Dynamometer testing has shown that aluminium-fly ash composite brake drums have better performance and wear than cast iron drums. 6 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Variation of carbon crystalline structures and CO{sub 2} gasification reactivity of Shenfu coal chars at elevated temperatures

When the carbon crystalline structures of Shenfu coal chars were analyzed by XRD, they could be divided into two components with a relatively poor crystalline structure component (P component) and a relatively good crystalline structure component (G component). During the elevated temperature pyrolysis, a more prolonged thermal history and a higher pyrolysis temperature resulted in a larger fraction of the G component and the P component, respectively, and the graphitization of Shenfu coal chars was not quite easy. During the gasification, the consumption of the P component was larger than that of the G component. Besides, the CO{sub 2} gasification reactivity of Shenfu coal chars was also investigated by an isothermal thermogravimetric analysis at the ambient pressure and gasification temperatures of 950-1400{sup o}C. The pyrolysis heating rate had a significant effect on the reactivity of resulting chars, which was that the gasification activity of rapid pyrolysis chars was higher or several times higher than that of slow pyrolysis chars. As the gasification temperature was elevated, the reactivity of coal chars increased, while the increasing extent of the reactivity of coal chars was smaller and smaller above the ash fusion temperature and even almost unchanged in the higher temperature range. The rate-controlling step of the gasification reaction changed gradually from the chemical reaction in the low temperature range (950-1150{sup o}C) to the gas diffusion in high temperature range (1150-1400{sup o}C). 32 refs., 11 figs., 7 tabs.

01 COAL, LIGNITE, AND PEAT↗

Devolatilization and cracking characteristics of Australian lumpy coals

An experimental study was conducted to investigate the devolatilization characteristics of five Australian coals in a thermogravimetric analysis (TGA) reactor by varying the coal lump size and the temperature. The swelling ratio was measured after thermal treatment of coal lumps in a horizontal tube furnace at 1273 K while the cracks generated in the lumpy char samples were examined using scanning electron microscopy (SEM). Physical and chemical properties of coal and char samples were measured using CO{sub 2} gas adsorption, Hg porosimetry, X-ray fluorescence (XRF) and X-ray diffraction (XRD). Under all the tested conditions, the total volatile yield of lumpy coals was found to be not influenced by either the temperature or particle size and was similar to that indicated in proximate coal analysis. However, as expected, the devolatilization rates were found to increase with increasing temperature as well as the increasing amount of volatiles present in the coal. The study further demonstrated that the effect of coal properties on the devolatilization rates of lumpy coals may not be significant as the rates decrease with increasing lump size, such that coal lumps with sizes more than 10 mm indicated similar orders of reaction rates. The apparent activation energy of coal lumps indicated a linear correlation with the stack height of the carbon crystallite of coals. The study demonstrated that the cracking and swelling behavior of coals was influenced by physical as well as chemical properties, particularly their modification during devolatilization conditions. The study showed that coals with low volatiles indicated high cracking which would increase further with increasing lump size in accordance with the size effect. The cracking tendency of coals appeared to have a reciprocal association with swelling tendency such that less swelling coals are more vulnerable to cracking. 33 refs., 13 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Atmospheric polycyclic aromatic hydrocarbons in North China: a winter-time study

The contamination and outflow of atmospheric polycyclic aromatic hydrocarbons (PAHs) in the Chinese Northern Plain, a region with a total area of 300 000 km{sup 2} and a high PAH emission density, were investigated. Polyurethane foam (PUF) and PM10 samples were collected at 46 sites located in urban, rural (towns or villages), and control (remote mountain) areas in the winter from November 2005 to February 2006. The observed concentrations of atmospheric PAHs were generally higher than those reported for developed countries and southern Chinese cities. It was found that there was no significant difference in air PAH concentrations between the urban and the rural areas while the PAH concentrations at the control sites were 1 order of magnitude lower than those at the other sites. The primary reason for the similarity in PAH concentrations between urban and rural areas was the fact that the predominant sources of biomass and domestic coal combustion were widely spread over the study area. The partition constants (K{sub PM10}) of PAHs were significantly correlated to the corresponding values of subcooled liquid-vapor pressure (pL{sup 0}). However, the regression slopes of log K{sub PM10} versus log pL{sup 0} were much steeper than -1, indicating adsorption dominated over absorption. Three distinct patterns of outflow from the study area were identified by forward trajectory and cluster analysis. 64 refs., 3 figs.

01 COAL, LIGNITE, AND PEAT↗

Impacts of halogen additions on mercury oxidation, in a slipstream selective catalyst reduction (SCR), reactor when burning sub-bituminous coal

This paper presents a comparison of impacts of halogen species on the elemental mercury (Hg(0)) oxidation in a real coal-derived flue gas atmosphere. It is reported there is a higher percentage of Hg(0) in the flue gas when burning sub-bituminous coal (herein Powder River Basin (PRB) coal) and lignite, even with the use of selective catalytic reduction (SCR). The higher Hg(0) concentration in the flue gas makes it difficult to use the wet-FGD process for the mercury emission control in coal-fired utility boilers. Investigation of enhanced Hg(0) oxidation by addition of hydrogen halogens (HF, HCl, HBr, and HI) was conducted in a slipstream reactor with and without SCR catalysts when burning PRB coal. Two commercial SCR catalysts were evaluated. SCR catalyst no. 1 showed higher efficiencies of both NO reduction and Hg(0) oxidation than those of SCR catalyst no. 2. NH{sub 3} addition seemed to inhibit the Hg(0) oxidation, which indicated competitive processes between NH{sub 3} reduction and Hg(0) oxidation on the surface of SCR catalysts. The hydrogen halogens, in the order of impact on Hg(0) oxidation, were HBr, HI, and HCl or HF. Addition of HBr at approximately 3 ppm could achieve 80% Hg(0) oxidation. Addition of HI at approximately 5 ppm could achieve 40% Hg(0) oxidation. In comparison to the empty reactor, 40% Hg(0) oxidation could be achieved when HCl addition was up to 300 ppm. The enhanced Hg(0) oxidation by addition of HBr and HI seemed not to be correlated to the catalytic effects by both evaluated SCR catalysts. The effectiveness of conversion of hydrogen halogens to halogen molecules or interhalogens seemed to be attributed to their impacts on Hg(0) oxidation. 30 refs., 4 figs.

01 COAL, LIGNITE, AND PEAT↗

Novel sorbents of non-metal-doped spinel Co{sub 3}O{sub 4} for the removal of gas-phase elemental mercury

N-doping technology is introduced to improve Co{sub 3}O{sub 4}'s Hg{sup 0} removal ability and anion activation ability for the first time. The adsorption tests show that N-doped Co{sub 3}O{sub 4} has a higher S{sub BET} and greater Hg{sup 0} removal ability. The reaction mechanism has been carefully studied using a number of different analyses methods such as X-ray diffraction, Brunauer-Emmett-Teller, and X-ray photoelectron spectroscopy. The analysis results illustrate that N atoms have been doped into a Co{sub 3}O{sub 4} matrix as anions and are thought to substitute for O atoms. Anions, such as Cl{sup -} and Br{sup -}, can be activated by N-doped Co{sub 3}O{sub 4} and then oxidize Hg{sup 0}. It is considered that nitrogen atoms in polycrystalline N-doped Co{sub 3}O{sub 4} are responsible for the significant enhancement of Hg{sup 0} removal ability. Different NH{sub 4}Cl or NH{sub 4}Br adulteration values have been tested, and the results show that 50 mol % NH{sub 4}Cl or 40 mol % NH{sub 4}Br doped Co{sub 3}O{sub 4} have the highest Hg{sup 0} removal ability. Compared with Co{sub 3}O{sub 4}, N-doped Co{sub 3}O{sub 4} has a longer breakthrough time and better SO{sub 2} antipoisoning ability. On the basis of the above analyses, possible Hg{sup 0} oxidation mechanisms of N-doped CO{sub 3}O{sub 4} are provided. 30 refs., 6 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Conducting a greenhouse gas emission inventory

Although not yet mandatory, the author recommends that US electric utilities that have not already done so should conduct an inventory of greenhouse gases, in accordance with ANSI/ISO/NSF E 14064-1-2006. The World Resources Institute 'Greenhouse gas protocol - a corporate accounting and reporting standard' provides more detailed explanation and examples of ISO 14064 but does not provide much detail on making calculations. The inventory should address all six greenhouse gases. The article gives an example of how emissions are converted to CO{sub 2} equivalents and tabulates helpful CO{sub 2} combustion emissions factors. Advice is offered on establishing 'organisational boundaries', tracking emissions over time, identifying and calculating greenhouse has emissions, accounting for greenhouse gas removals and reporting on carbon intensity ratios. 6 refs., 2 figs., 3 tabs.

20 FOSSIL-FUELED POWER PLANTS↗

FGD gypsum issues

The article first explains how gypsum by-product is produced in flue gas desulfurization systems in coal-fired power plants. It goes on to talk about the main markets for gypsum - wallboard manufacture (Plaster of Paris), cement production and soil stabilization. In the USA in 2006 41.6 million tons of gypsum was used by manufacturers of wallboard and plaster products, 3.0 mt for cement production and 1.1 mt for agricultural purposes. A method of determining the by-product gypsum content by thermogravimetric analysis is outlined. 4 refs., 1 fig.

01 COAL, LIGNITE, AND PEAT↗

Comparing materials used in mist eliminators

Wet flue gas desulfurization (FGD) systems, or wet scrubbers, are notoriously capital - and maintenance-intensive. Mist eliminators are an integral part of most wet FGD systems. These are available in a variety of materials - polypropylene, fiberglass reinforced polymer (FRP), polysulfone and stainless steel. The article discusses the material properties, performance attributes and relative cost differences associated with each of these four materials. It describes the common problems with mist eliminators - fouling and corrosion. These can be minimised by routine cleaning and use of chemical additives to prevent deposition. An analysis was carried out to compare the four materials at APS Cholla power plant. As a result the facility is retrofitting its remaining wet scrubber towers in Unit 2 with mist eliminators constructed from polysulfone as each of the current ones of the existing polypropylene needs replacing. Polysulfone is cheaper to clean and components require replacing less frequently than polypropylene. Switching from stainless steel to polypropylene has proved advantageous on 22 wet scrubbers operated by PPL Montana. 5 figs. 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Is it time to rethink SO{sub 2} control technology selection?

The article traces the history of flue gas desulfurization (FGD) systems in power plants in the USA following the 1990 Clean Air Act which divided boilers into Phase I (larger SO{sub 2} emitters) and Phase II units. The Clean Air Interstate Rule (CAIR) will soon require emission control on smaller boilers burning low and medium-sulfur coal. Today the systems of choice are dry FGD systems for low sulfur coals and greater than wet LSFO. (limestone forced oxidation systems) for coal with sulfur content about 2%. Demand for wet FGD coupled with tighter regulations has led to significant cost increases in LSFO. technology. 4 refs., 2 figs.

01 COAL, LIGNITE, AND PEAT↗

Black Bear Prep plant replaces high-frequency screens with fine wire sieves

At the Black Bear prep plant (near Wharncliffe, WV, USA) the clean coal from the spirals traditionally reported to high-frequency screens, which removed high-ash clay fines. Screens have inherent inefficiencies that allow clean coal to report to the screen underflow. The goal of this project was to capture the maximum amount of spiral clean coal while still removing the high-ash clay material found in the spiral product. The reduction of the circulating load and plant downtime for unscheduled maintenance were projected as additional benefits. After the plant upgrade, the maintenance related to the high frequency screens was eliminated and an additional 2.27 tons per hour (tph) of fine coal was recovered, which resulted in a payback period of less than one year. The article was adapted from a paper presented at Coal Prep 2007 in April 2007, Lexington, KY, USA. 1 ref., 1 fig., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Coal operators prepare for a prosperous new year

Results are given of the Coal Age 2008 annual Forecast Survey of 17 coal mining executives which reinforces that 2008 could be a very good year. Coal operators are planning to invest in new equipment, development and new coal mine start-ups, based on a number of demand- and supply-side fundamentals. 71% of those surveyed thought coal production in 2008 would increase from 2007 levels and US exports are expected to climb due to the weak dollar. If the tax credit on synfuels expires on 31 December 2007 production of coal synfuel will likely cease. Asked about expensive planned purchases, companies answers ranged from $80,000 for an underground scoop to $500 m for a new mine installation. However, most producers admit they will not be able to operate at full capacity. 7 figs.

01 COAL, LIGNITE, AND PEAT↗

Out of the sandbox - cohesive dragline planning

Since 1983, Southern Illinois University Carbondale (SIUC), through the Coal Research Center in Carterville, Illinois, has been engaged in operator, engineer, supervisor and manager training in the foundations, plan formulation, iteration and improvement in efficiency of dragline planning and operations. 3d-Dig is a 3-D modeling package used in SIUC's training program to simulate digging and dumping from truck-shovel, dozer-push and dragline operations. SIUC has a scale model dragline and dragline simulator available to assist course attendees with standard dig progressions and optimizing operator technique. 1 fig., 6 photos.

01 COAL, LIGNITE, AND PEAT↗

A vibrating screen maintenance plan combines the routine with special attention

To properly maintain a screening machine coal preparation plant operators need to choose the appropriate screening machine for the application and install it properly. The way the feed is distributed to the deck is also important. The screen motion has a big impact on how the machine operates. 1 fig., 4 photos.

01 COAL, LIGNITE, AND PEAT↗

SO{sub 3} effect on mercury control

Utilities are counting on their flue gas desulfurization (FGD) scrubbers and selective catalytic reduction (SCR) systems to control mercury as well as pollutants such as SO{sub 2} and NOx. As more stringent emission limits are phased in, utilities will likely need supplemental measures such as activated carbon injection (ACI) to further reduce emissions. However, SO{sub 3} could foul this strategy and potentially jeopardize the ability of some coal-fired power plants to meet future mercury emission limits. A growing consensus exists among emissions control engineers and researchers that the presence of SO{sub 3} in the flue gas from coal-fired boilers reduces the capacity of fly ash and/or activated carbon to adsorb gaseous mercury species. The impact of SO{sub 3}, which is actually a combination of SO{sub 3} and H{sub 2}SO{sub 4} vapor, has been investigated on a fundamental level using approaches such as fixed-bed reactors and activated carbons. Pilot testing has provided mercury removal efficiency data on actual flue gas over a wide range of SO{sub 3} concentrations. If SO{sub 3} threatens the feasibility of low capital-cost approaches involving activated carbon, utilities will be forced to explore other more costly options. One example is the use of mercury catalytic oxidation to boost mercury removal efficiencies in wet scrubbers. However, catalytic oxidation of mercury using SCR catalysts may have unintended consequences. A better alternative may be to remove the SO{sub 3} so it does not interfere with the removal of mercury via the fly ash and/or activated carbon for example using sodium sorbents. The article outlines research projects on alternatives. 4 figs.

01 COAL, LIGNITE, AND PEAT↗

FGD wastewater treatment still has a way to go

The power industry should jointly address questions about FGD water treatment and share the lessons it has learned so far. The article describes a scheme developed by CH2M Hill to treat FGD wastewater and remove heavy metals. The process desaturates the waste water of sulfates and removes the bulk of the insoluble suspended solids prior to tertiary treatment of heavy metals using a chemical/physical treatment process. Additional treatment could be provided (for example, anoxic biological treatment) for selenium, nitrates and organics. 2 figs.

01 COAL, LIGNITE, AND PEAT↗