Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEEDSTOCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

Novel Preprocessing Techniques for Enhancing Flowability of Miscanthus

Purpose-grown energy crops possess significant potential as promising feedstocks for biofuel and biochemical production. However, similar to other biomass feedstocks, their utilization has been hindered by handling and feeding challenges such as clogging and segregation, which prevent biorefineries from operating at full capacity. These challenges arise primarily due to particle attributes including irregular shape, high flexibility, and high compressibility, leading to interlocking, high compaction, and significant friction under stress consolidation. To enhance operational reliability, it is crucial to focus on preprocessing techniques to address these issues, alongside accurately characterizing the mechanical and physical properties and flow performance of these feedstocks. This study investigates novel preprocessing techniques, including pelletization and torrefaction, to fundamentally alter these particle attributes and improve flowability. Miscanthus, an herbaceous energy crop, was the primary focus of this study. Samples were processed using a Forest Concepts Crumbler rotary shear system and an oscillating multi-stack screen bed to achieve two nominal (baseline) particle sizes: 6mm and 2mm. The study evaluated the efficiency and energy consumption of size reduction, revealing that while 2mm particles required more energy, they exhibited better flowability and higher yield strength compared to 6mm particles. Shear and compression tests assessed the material's shear strength, internal friction, and elastic modulus, while wedge-shaped hopper tests measured the critical arching distance and mass flow rate. The results provide valuable insights into the mechanical properties and processing efficiency of Miscanthus, contributing to the development of a preprocessing framework that enhances energy efficiency and material flowability in bioenergy production. However, further preprocessing and development are required to optimize this framework fully.

09 - BIOMASS FUELS↗

Method and system embodiments for converting ethanol to para-xylene and ortho-xylene

Disclosed herein are embodiments of a method and system for converting ethanol to para-xylene. The method also provides a pathway to produce terephthalic acid from biomass-based feedstocks. In some embodiments, the disclosed method produces p-xylene with high selectivity over other aromatics typically produced in the conversion of ethanol to xylenes, such as m-xylene, ethyl benzene, benzene, toluene, and the like. And, in some embodiments, the method facilitates the ability to use ortho/para mixtures of methylbenzyaldehyde for preparing ortho/para xylene product mixtures that are amendable to fractionation to separate the para- and ortho-xylene products thereby providing a pure feedstock of para-xylene that can be used to form terephthalic anhydride and a pure feedstock of ortho-xylene that can be used for other purposes, such as phthalic anhydride.

Ramasamy, Karthikeyan Kallupalayam↗

Final Scientific/Technical Report for "A Novel,Highly Efficient and Economic Purification Process Revolutionizing PTA Production"

GTC Technology, Inc., under a cooperative agreement with the DOE’s Industrial Technologies Program and in collaboration with Montana State University, has completed pilot scale testing of a revolutionary new process to produce purified terephthalic acid (PTA), a crucial chemical commodity manufactured worldwide. Purified terephthalic acid (PTA) is a starting material for the formation of polyester resin. Polyester resin is used to make many valuable commercial products, including clothing, plastic containers and films. In traditional PTA production, critical reactions are carried out at high temperatures and pressures, creating physically harsh and economically costly operating conditions. The chemical halide bromine is an essential ingredient for part of the conventional process. As a result of using bromine, the highly toxic and environmentally insidious compound methyl bromide is formed. The corrosive nature of bromine also mandates the use of specialized and expensive corrosion-resistant materials for plant construction. Plants processing PTA conventionally must also use copious amounts of precious water resources and manage costly water treatment operations. GTC’s new TA purification method employs a unique two-step crystallization process capable of operating at lower temperatures and pressures than traditional methods. Utilization of a highly selective, proprietary organic solvent blend also allows for the flexibility of accepting higher levels of impurities in the initial purification feedstock. The relaxed physical operating conditions combined with the effectiveness of the blended organic solvent allow for the efficient purification of feedstock created in a bromine free manner. Along with the elimination of bromine, the new purification technology drastically reduces energy costs and expensive wastewater treatment. Industry wide implementation in the United States alone could yield energy savings of 22 trillion BTU per year. In 2007, using the aforementioned innovative and novel approaches to purification, GTC successfully produced PTA at the pilot scale. The product was sent to a major polyester manufacturer for commercial evaluation. The findings from the resin manufacturer noted that polymerization characteristics of GTC-PTA were identical to that of commercially available PTA. Global production of PTA is predicted to grow significantly over the next decade, as consumers demand lighter, more disposable goods and products. The potential environmental and economic benefits of implementing GTC’s new terephthalic acid purification technology are phenomenal in scope. Reduced capital and operating costs, combined with the ability to easily integrate into existing facilities and handle less pure feedstock make this revolutionary new technology incredibly valuable to polyester consumers worldwide.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Biomass Supply Logistics and Infrastructure

Feedstock supply system encompasses numerous unit operations necessary to move lignocellulosic feedstock from the place where it is produced (in the field or on the stump) to the start of the conversion process (reactor throat) of the Biorefinery. These unit operations, which include collection, storage, preprocessing, handling, and transportation, represent one of the largest technical and logistics challenges to the emerging lignocellulosic biorefining industry. This chapter briefly reviews methods of estimating the quantities of biomass followed by harvesting and collection processes based on current practices on handling wet and dry forage materials. Storage and queuing are used to deal with seasonal harvest times, variable yields, and delivery schedules. Preprocessing can be as simple as grinding and formatting the biomass for increased bulk density or improved conversion efficiency, or it can be as complex as improving feedstock quality through fractionation, tissue separation, drying, blending, and densification. Handling and Transportation consists of using a variety of transport equipment (truck, train, ship) for moving the biomass from one point to another. The chapter also provides typical cost figures for harvest and processing of biomass.

09 BIOMASS FUELS↗

Integrated Operation of INL HYTEST System and High-Temperature Steam Electrolysis for Synthetic Natural Gas Production

The primary feedstock for synthetic fuel production is syngas, a mixture of carbon monoxide and hydrogen. Current hydrogen production technologies rely upon fossil fuels and produce significant quantities of greenhouse gases as a byproduct. This is not a sustainable means of satisfying future hydrogen demands, given the current projections for conventional world oil production and future targets for carbon emissions. For the past six years, the Idaho National Laboratory has been investigating the use of high-temperature steam electrolysis (HTSE) to produce the hydrogen feedstock required for synthetic fuel production. High-temperature electrolysis water-splitting technology, combined with non-carbon-emitting energy sources, can provide a sustainable, environmentally-friendly means of large-scale hydrogen production. Additionally, laboratory facilities are being developed at the INL for testing hybrid energy systems composed of several tightly-coupled chemical processes (HYTEST program). The first such test involved the coupling of HTSE, CO2 separation membrane, reverse shift reaction, and methanation reaction to demonstrate synthetic natural gas production from a feedstock of water and either CO or a simulated flue gas containing CO2. This paper will introduce the initial HTSE and HYTEST testing facilities, overall coupling of the technologies, testing results, and future plans.

08 HYDROGEN↗

Nuclear Hybrid Energy Systems: Imperatives, Prospects, and Challenges

As global population reaches an expected 8 billion people by 2030, primary energy consumption is expected to increase by almost 40% from approximately 520 exajoules consumed today to almost 740 exajoules. Much of this increase is expected to come from non-Organization for Economic Cooperation and Development (OECD) nations, and Asia specifically. In these economies, energy used for transportation is expected to grow substantially, as is industrial, commercial and to a lesser degree residential energy use, creating considerable pressure on global and local energy markets. The magnitude and timing of growth in energy consumption likely will create a global imperative to deploy energy production technologies that balance the three pillars of energy security: • economic stability – related to the affordability of energy products, stability and predictability in their price, and the efficient and effective deployment of global capital resources in their development; • environmental sustainability – related to minimizing the negative impacts of energy production to air, land, and water systems and advancing the long-term viability of using a particular resource in a way that does not limit future generations ability to prosper; • resource security – related to the ability to access energy resources and products where and when necessary, in an affordable and predictable manner. One approach to meeting these objectives is hybrid energy systems (HES). Broadly described, HES are energy product production plants that take two or more energy resource inputs (typically includes both carbon and non-carbon based sources) and produce two or more energy products (e.g. electricity, liquid transportation fuels, industrial chemicals) in an integrated plant. Nuclear energy integration into HES offers intriguing potential, particularly if smaller (<300 MWe) reactors are available. Although the concept of using nuclear energy in a variety of non-electrical process applications is certainly not new, renewed interest in more tightly coupled energy product plants (such as HES) that meet the objectives outline above have gained additional interest recently, an interest likely sparked by sharpening energy security concerns. Studies have shown that non-nuclear integrated (hybrid) energy systems can have appealing attributes in terms of overall process efficiency, enhanced electric grid stability, renewable energy integration, and economic performance, and lifecycle greenhouse gas emissions. These attributes seem to be sufficiently compelling that several significant commercial investments in fossil-renewable HES are being made in the United States while the U.S. Defense Advanced Research Projects Agency (DARPA) has openly solicited information regarding nuclear energy integration schemes. The challenges of nuclear energy integration include myriad issues associated with the following RD&D areas, or “platforms”: • feedstock processing (e.g. bio-feedstock integration with coal, carbon feedstock extraction using nuclear energy); • heat / energy management (e.g. advanced heat exchangers, process design); • energy storage (e.g. H2 production, liquid fuels synthesis); • byproduct management (e.g. CO2 recycle approaches); • systems dynamics, integration and control (e.g. process dynamics analyses and optimization, advanced prognostics, diagnostics, variable time scale control and flow sheet optimization).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Use of the SWAT model to evaluate the sustainability of bioenergy production at a National scale

As the US begins to integrate biomass crops and residues into its mix of energy feedstocks, tools are needed to measure the long-term sustainability of these feedstocks. Two aspects of sustainability are long-term potential for profitably producing energy and protection of ecosystems influenced by energy-related activities. The Soil and Water Assessment Tool (SWAT) is an important model used in the efforts to quantify both aspects. To quantify potential feedstock production, they used SWAT to estimate switchgrass yields at a national scale. The results from this analysis produced a map of the potential switchgrass yield along its natural eastern range. To quantify ecological protection, they are using the SWAT model to forecast changes in water quality and fish richness as a result of landscape alterations due to incorporating bioenergy crops. They have implemented the SWAT model in the Arkansas-Red-White region, which drains into the Mississippi River, and they present their methods here. They identified two sub-watersheds for sensitivity analysis and calibration of the water quality results, and then, explored ways to apply the calibration results to the whole region and validate the model setup. They also present an overview of their research in which results from the calibrated regional SWAT model were used to analyze potential changes in fish biodiversity. Only by evaluating the energy and environmental implications of landscape changes can we make informed decisions about bioenergy at the national scale, and the SWAT model will enable us to reach that goal.

09 BIOMASS FUELS↗

Sustainable Lactic Acid Production from Lignocellulosic Biomass

Lignocellulosic biomass is a promising feedstock for sustainable biofuels and bioproducts. Among emerging bioproducts, lactic acid has attracted significant interest because of its growing application in many industries (e.g., packaging, medical, and pharmaceutical). In this study, BioSTEAM—an open-source platform—was leveraged for the design, simulation, and evaluation (via techno-economic analysis, TEA, and life cycle assessment, LCA) of lignocellulosic lactic acid biorefineries. With a minimum product selling price (MPSP) between 1.38 and 1.91 kg –1 (5th–95th percentiles, baseline at 1.57 kg –1 ), the biorefinery was capable of producing market-competitive lactic acid (market price between 1.7 and 2.1 kg –1 ), and its performance could be further enhanced (e.g., MPSP down to 1.09 kg –1 , global warming potential of 2.79 kg CO 2 -eq·kg –1 , and fossil energy consumption of 31.7 MJ·kg –1 ) with advancements in key technological parameters (fermentation yield and separation process conversions) and optimization in process operation. Sensitivity analyses focused on the fermentation unit (across titer, yield, and productivity; neutral vs low-pH fermentation) and feedstock characteristics (carbohydrate content and price) were also included to quantify their impact on the sustainability of the biorefinery. Overall, this research highlights the ability of agile TEA/LCA to screen promising biorefinery designs, prioritize research needs, and establish a road map for the continued development of bioproducts and biofuels.

09 BIOMASS FUELS↗

Multisite Field Evaluation of Oil Accumulation and Agronomic Performance in Grain and Sweet Sorghums Engineered for Lipid Hyperaccumulation

Oil sorghum (OS) has been developed by engineering grain (TX430) and sweet (Ramada) genetic backgrounds to accumulate triacylglycerols (TAG) in vegetative tissues as an energy-dense feedstock for sustainable aviation fuel (SAF) and other biofuels. This study evaluated two TX430 OS lines (TxHO-2, TxHO-3) and two Ramada OS lines (RmHO-1, RmHO-2) alongside wild-type (WT) lines in NE and IL over 2 years (2023–2024) to quantify genotype × environment effects on agronomic performance and TAG accumulation. Across four environments, TX430 OS lines showed average TAG concentrations of 15.0 g kg −1 in leaves and 12.8 g kg −1 in stems, approximately 19-fold higher than WT. Ramada OS lines accumulated 26.1 g kg −1 in leaves and 12.3 g kg −1 in stems, approximately 25-fold and 13-fold increases over WT, respectively. OS lines in TX430 exhibited an 18% reduction in biomass (8.4 vs. 9.9 Mg ha −1 for WT), while Ramada OS lines had similar WT biomass (18.3 vs. 19.9 Mg ha −1 for WT). Among TX430 OS lines, TxHO-2 achieved the highest TAG yield (190 kg ha −1 ), while RmHO-1 led the Ramada lines (335 kg ha −1 ) due to higher biomass and similar TAG concentration. Enhanced TAG accumulation increased N, P, and K removal in TX430 lines but not in Ramada lines. Structural carbohydrate and ash concentration were unaffected. Overall, results confirm vegetative lipid accumulation as a viable strategy for high-biomass sorghum, supporting its potential as a dual-purpose feedstock for SAF. Future work should focus on minimizing biomass yield penalties and improving nutrient use efficiency in oil sorghum systems.

60 APPLIED LIFE SCIENCES↗

Data for Creating Yellow Seed Camelina sativa with Enhanced Oil Accumulation by CRISPR-Mediated Disruption of Transparent Testa 8

Camelina ( Camelina sativa L.), a hexaploid member of the Brassicaceae family, is an emerging oilseed crop being developed to meet the increasing demand for plant oils as biofuel feedstocks. In other Brassicas, high oil content can be associated with a yellow seed phenotype, which is unknown for camelina. We sought to create yellow seed camelina using CRISPR/Cas9 technology to disrupt its Transparent Testa 8 (TT8) transcription factor genes and to evaluate the resulting seed phenotype. We identified three TT8 genes, one in each of the three camelina subgenomes, and obtained independent CsTT8 lines containing frameshift edits. Disruption of TT8 caused seed coat colour to change from brown to yellow reflecting their reduced flavonoid accumulation of up to 44%, and the loss of a well-organized seed coat mucilage layer. Transcriptomic analysis of CsTT8-edited seeds revealed significantly increased expression of the lipid-related transcription factors LEC1, LEC2, FUS3, and WRI1 and their downstream fatty acid synthesis-related targets. These changes caused metabolic remodelling with increased fatty acid synthesis rates and corresponding increases in total fatty acid (TFA) accumulation from 32.4% to as high as 38.0% of seed weight, and TAG yield by more than 21% without significant changes in starch or protein levels compared to parental line. These data highlight the effectiveness of CRISPR in creating novel enhanced-oil germplasm in camelina. The resulting lines may directly contribute to future net-zero carbon energy production or be combined with other traits to produce desired lipid-derived bioproducts at high yields.

Biofuels↗

Bioenergy

Scientists and engineers at Idaho National Laboratory are working with partners throughout the bioenergy industry in preprocessing and characterization to ensure optimum feedstock quality. This elite team understands that addressing feedstock variability is a critical component in the biofuel production process.

09 BIOMASS FUELS↗

Nth-plant supply: corn stover supplies and costs in a fleet of biorefineries

Feedstock cost and cost variability is expected to increase with the number of biorefineries. To quantify this effect, this spatial-economic analysis simulates feedstock cost and cost variability of an industry based on corn stover as a function of the number of biorefineries. Results are reported for nine scenarios (a base case and sensitivity analysis of four variables – harvest efficiency, sustainability constraints, opportunity cost, and corn grain yield) under deterministic and stochastic simulations, assuming biorefineries using 658 000 Mg (725 000 tons) year- 1 of corn stover in 2019. The resulting supply curves are highly elastic (i.e. little change in cost) for the first 50 of the 121 biorefineries, with price increases in subsequent biorefineries depending on scenario. In the base-case deterministic scenario, weighted-average stover costs are $66 Mg -1 ($60 ton- 1 ), $69 Mg -1 ($62 ton -1 ), and $156 Mg -1 ($142 ton -1 ), at the first, 60th, and 121st biorefineries, respectively. The stochastic simulations, subject to observed 30-year corn yield variability, follow a similar pattern, with price distributions that vary by scenario. The base-case stochastic simulations illustrate minimal cost variability for the first 60 biorefineries, but rapid increases in cost variability in the second half of potential biorefineries, with similar patterns observed in the other scenarios. Of the four variables explored, price was most sensitive to harvest efficiency, followed by sustainability constraints, corn yield, and opportunity cost. Results suggest that, under conventional logistics, about half of the US corn stover resource is reliably available with minimum cost increase and variability. Interactive visualization is available at https://doi.org/10.11578/1828779.

09 BIOMASS FUELS↗

Global energy sector emission reductions and bioenergy use: overview of the bioenergy demand phase of the EMF-33 model comparison

We present an overview of results from 11 integrated assessment models (IAMs) that participated in the 33rd study of the Stanford Energy Modeling Forum (EMF-33) on the viability of large-scale deployment of bioenergy for achieving long-run climate goals. The study explores future bioenergy use across models under harmonized scenarios for future climate policies, availability of bioenergy technologies, and constraints on biomass supply. This paper provides a more transparent description of IAMs that span a broad range of assumptions regarding model structures, energy sectors, and bioenergy conversion chains. Without emission constraints, we find vastly different CO 2 emission and bioenergy deployment patterns across models due to differences in competition with fossil fuels, the possibility to produce large-scale bio-liquids, and the flexibility of energy systems. Imposing increasingly stringent carbon budgets mostly increases bioenergy use. A diverse set of available bioenergy technology portfolios provides flexibility to allocate bioenergy to supply different final energy as well as remove carbon dioxide from the atmosphere by combining bioenergy with carbon capture and sequestration (BECCS). Sector and regional bioenergy allocation varies dramatically across models mainly due to bioenergy technology availability and costs, final energy patterns, and availability of alternative decarbonization options. Although much bioenergy is used in combination with CCS, BECCS is not necessarily the driver of bioenergy use. We find that the flexibility to use biomass feedstocks in different energy sub-sectors makes large-scale bioenergy deployment a robust strategy in mitigation scenarios that is surprisingly insensitive with respect to reduced technology availability. However, the achievability of stringent carbon budgets and associated carbon prices is sensitive. Constraints on biomass feedstock supply increase the carbon price less significantly than excluding BECCS because carbon removals are still realized and valued. Incremental sensitivity tests find that delayed readiness of bioenergy technologies until 2050 is more important than potentially higher investment costs.

09 BIOMASS FUELS↗

Investigating the Efficacy of Integrating Energy Crops into Non-Profitable Subfields in Iowa

We present that within-field spatial variability reduces growers’ return on investment and overall productivity while potentially increasing negative environmental impacts through increased soil erosion, nutrient runoff, and leaching. The hypothesis that integrating energy crops into non-profitable segments of agricultural fields could potentially increase grain yield and biomass feedstock production was tested in this study using a statewide analysis of predominantly corn- and soy-producing counties in Iowa. Basic and rigorous controls on permissible soil and soil-carbon losses were imposed on harvest of crop residues to enhance year-to-year sustainability of crop and residue production. Additional criteria limiting harvesting costs and focus on large-area subfields for biomass production were imposed to reduce the impacts of energy crop integration on grain production. Model simulations were conducted using 4 years (2013–2016) of soil, weather, crop yield, and management practice data on all counties in Iowa. Miscanthus (Miscanthus x giganteus), switchgrass (Panicum virgatum), and crop-residue-based bioenergy feedstock systems were evaluated as biomass. Average energy crop and plant residue harvesting efficiencies were estimated at 50 and 60%, respectively. Because of higher potential yields, average logistics costs for miscanthus-based biomass production were 15 and 23% lower than switchgrass-based and crop residue-based biomass productions, respectively, under basic sustainability controls, and 17 and 26% lower under rigorous sustainability controls. Lastly, subfield shape, size, area, and harvest equipment size were the dominant factors influencing harvesting cost and efficiency suggesting that in areas where subfields are predominantly profitable or harvesting efficiencies low, other options such as prairie strips, buffer zones around fields, and riparian areas should be investigated for more profitable biomass production and sustainable farming systems.

09 BIOMASS FUELS↗

Finding Promising Candidates for Wet Growing Conditions: The Effect of Two Row Spacings on Biomass Production of Four Bioenergy Prairie Cordgrass Populations in a Wet Marginal Land

Demand for energy and the environmental consequences associated with fossil fuel emissions has created a need for alternative energy sources. To avoid conflict over the conversion of existing agricultural land from food production to fuel production, bioenergy crops could instead be cultivated on marginal land. Here, this study compared the performances, biomass yield, tiller density, and lignocellulosic bioenergy feedstock composition of four prairie cordgrass populations with two-row spacings cultivated on a waterlog-prone marginal land, as well as three other bioenergy candidate crops used as controls: big bluestem, M. × giganteus , and switchgrass. Across all populations and spacings, annual biomass yield of prairie cordgrass was 13 Mg ha −1 . Row spacing had significant impacts on prairie cordgrass productivity, with higher biomass yields observed in the 45 cm spacing than in the 90 cm spacing. Feedstock composition (cellulose, hemicellulose, ADL, and ash concentration) was not influenced by row spacing and did not deviate from expected values for growth on agricultural lands. However, biomass yields of the control species M . × giganteus and switchgrass planted in 45 cm spacing were higher than the prairie cordgrass. Our results provide evidence that prairie cordgrass could be a good energy crop with comparable biomass yield production to the energy crops M . × giganteus and switchgrass on waterlogged marginal land.

Bioenergy crops↗

Opportunities for bioenergy crops to support transitions from irrigated agriculture and conserve the U.S. High Plains Aquifer

This study investigates potential economic and groundwater driven transitions from irrigated maize production—the dominant irrigated cropping system in the High Plains Aquifer (HPA) region—to alternative crops such as sorghum and switchgrass, two common bioenergy feedstocks. Unsustainable groundwater extraction in the U.S. High Plains presents critical challenges including reduced irrigation capacities, diminished crop yields, lower land values, and escalating energy costs. Using a spatially explicit optimization framework combined with comprehensive economic and hydrogeological data, we evaluate optimal land-use strategies and irrigation system investments over a 30-year planning period. Results indicate significant regional variability in the future economic viability of irrigated agriculture, driven by differences in aquifer recharge rates, groundwater availability, and market conditions. Nebraska and parts of northern Texas can sustain irrigated maize profitability due to relatively favorable groundwater conditions and lower land rents, respectively. In contrast, many portions of Kansas and southern Texas are more likely to transition to dryland agriculture within two decades. Colorado and New Mexico show potential for significant adoption of switchgrass production as an alternative biomass-based energy crop. Overall, over the 30-year horizon, our model implies that approximately 23% of currently irrigated maize area across the HPA region may transition to dryland farming under business-as-usual conditions. This transition is complemented by a threefold increase in non-irrigated sorghum production, from 0.20 to 0.77 Mt yr−1, indicating that groundwater-driven shifts in agricultural production may support a larger regional base for bioenergy feedstocks. The study also reveals opportunities for producers to optimize economic returns and biomass production potential.

60 APPLIED LIFE SCIENCES↗

Optimizing bioenergy biofuel harvest: a comparative analysis of stepwise and integrated methods for economic and environmental sustainability

Switchgrass is a promising bioenergy feedstock due to its high biomass yield potential, adaptability to marginal lands, and low carbon intensity for feedstock production. However, accurate cost estimation and assessment of greenhouse gas (GHG) emissions for the energy-intensive harvesting process are essential for evaluating the sustainability of bioenergy. This study provides a comparative analysis of two harvesting methods: the Stepwise Method, which separates operations into multiple stages, and the Integrated Method, which combines mowing and raking into a single pass. The analysis was conducted under four scenarios based on field sizes and biomass yields. Using three years of field-scale switchgrass harvest data from 125 sites, GHG emissions, energy consumption, and harvesting costs were quantified using the GREET model and techno-economic analysis. Additionally, regression analysis identified key climate and operational factors affecting fuel consumption. The Stepwise method was the most cost-effective for large fields with high biomass yield, achieving the lowest harvesting costs ($37.70 per ton). In contrast, the Integrated Method performed better in small fields and low-yield conditions, reducing GHG emissions by 9 % and energy use by 5 %. Regression analysis confirmed that a larger field size reduced fuel consumption, while higher biomass yield and longer operational time increased fuel use. Maximum temperature also contributed to a slight increase in fuel consumption. Furthermore, these results provide actionable insights for optimizing harvesting strategies based on field-specific conditions and operational goals, contributing to the economic and environmental sustainability of bioenergy production.

60 APPLIED LIFE SCIENCES↗

Butyric acid: Applications and recent advances in its bioproduction

Butyric acid is an important C4 organic acid with broad applications. It is currently produced by chemosynthesis from petroleum-based feedstocks. However, the fermentative production of butyric acid from renewable feedstocks has received growing attention because of consumer demand for green products and natural ingredients in foods, pharmaceuticals, animal feed supplements, and cosmetics. In this review, strategies for improving microbial butyric acid production, including strain engineering and novel fermentation process development are discussed and compared regarding product yield, titer, purity and productivity. Future perspectives on strain and process improvements for butyric acid production are also discussed.

59 BASIC BIOLOGICAL SCIENCES↗