Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

A singularity free analytical solution of artificial satellite motion with drag

An analytical satellite theory based on the regular, canonical Poincare-Similar (PS phi) elements is described along with an accurate density model which can be implemented into the drag theory. A computationally efficient manner in which to expand the equations of motion into a fourier series is discussed.

Mueller, A.↗

Propulsion-free separation and rendezvous of small shuttle free-flyers using controlled differential drag

A natural successor in the Shuttle era to many sounding rocket flights is the free-flyer mode of operation, in which the Shuttle Orbiter releases a subsatellite (with payloads), effects a desired separation, and approaches and retrieves the free-layer. The propulsive maneuvers required of the Orbiter by equivalent relative motions obtained through controlled differential drag (via changes in free-layer effective area and/or Orbiter attitude changes) are replaced. Simplified analytical techniques are developed and feasibility is verified.

King, J. C.↗

Development of analytical orbit propagation technique with drag

Two orbit computation methods were used: (1) numerical method- The solution to the satellite differential equations were solved in a step-by-step manner, using a mathematical algorithm taken from numerical analysis; and (2) analytical method - The solution was expressed by explicit functions of the independent variable. Analytical drag modules, tesseral terms initialization module, second order and long period terms module, and verification testing of the ASOP program were also considered.

Source record↗

An exploratory investigation of the effect of a plastic coating on the profile drag of a practical-metal-construction sailplane airfoil

The Langley low-turbulence pressure tunnel to determine the effect of a plastic coating on the profile drag of a practical-metal-construction sailplane airfoil was investigated. The model was tested with three surface configurations: (1) filled, painted, and sanded smooth; (2) rough bare metal; and (3) plastic-coated. The results are compared with data for the design airfoil (Wortmann FX 67-K-170/17) from another low-turbulence wind tunnel. The investigation was conducted at Reynolds numbers based on airfoil chord of 1.1 x 10 to the 6th power, 2.2 x 10 to the 6th power, and 3.3 x 10 to the 6th power at a Mach number of 0.10.

Somers, D. M.↗

Flight determined lift and drag characteristics of an F-8 airplane modified with a supercritical wing with comparison to wind-tunnel results

Flight measurements obtained with a TF-8A airplane modified with a supercritical wing are presented for altitudes from 7.6 kilometers (25,000 feet) to 13.7 kilometers (45,000 feet), Mach numbers from 0.6 to 1.2, and Reynolds numbers from 0.8 x 10 to the 7th power to 2.3 x 10 to the 7th power. Flight results for the airplane with and without area-rule fuselage fairings are compared. The techniques used to determine the lift and drag characteristics of the airplane are discussed. Flight data are compared with wind-tunnel model results, where applicable.

Pyle, J. S.↗

Propulsion-free separation and rendezvous of small Shuttle free-flyers using controlled differential drag

A natural successor in the Shuttle era to many sounding rocket flights is the free-flyer mode of operation, in which the Shuttle Orbiter releases a subsatellite (with payload), effects a desired separation, and finally approaches and retrieves the free-flyer. This paper proposes replacing, to the maximum extent feasible, the propulsive maneuvers required for the Orbiter by equivalent relative motions obtained through controlled differential drag (via changes in free-flyer effective area and/or Orbiter attitude changes). Simplified analytical techniques are developed and feasibility is verified. Several illustrative examples are specified (e.g., a 3-km separation in 1 day, with 4-day return).

King, J. C.↗

Drop tower with no aerodynamic drag

Cooling air accelerated to match velocity of falling object eliminates drag. 3 meter drop tower with suction fan and specific geometry causes air to accelerate downward at 1 g. Although cooling of molten material released from top is slow because surrounding air moves with it, drop remains nearly spherical.

Kendall, J. M., Jr.↗

Effect of several airframe/nozzle modifications on the drag of a variable-sweep bomber configuration

A variable sweep bomber aircraft model was investigated to identify modifications for drag reduction. Modifications included simulated two dimensional nozzles, staggered and extended nozzles; short, long, and no interfairings between the nozzles; partial and complete wing-glove fairings; glove-fuselage sidefairing; fuselage underfairing; and wing pods. The variable wing sweep and variable exhaust nozzles of the scale model are discussed.

Re, R. J.↗

Flow and Drag Formulas for Simple Quadrics

The pressure distribution and resistance found by theory and experiment for simple quadrics fixed in an infinite uniform stream of practically incompressible fluid are calculated. The experimental values pertain to air and some liquids, especially water; the theoretical refer sometimes to perfect, again to viscid fluids. Formulas for the velocity at all points of the flow field are given. Pressure and pressure drag are discussed for a sphere, a round cylinder, the elliptic cylinder, the prolate and oblate spheroid, and the circular disk. The velocity and pressure in an oblique flow are examined.

Zahm, A. F.↗

Investigations regarding the drag characteristics of flow-disturbing bodies which are arranged in line and attached to the wall

The flow characteristics of rectangular bodies mounted on the base area of a rectangular closed wind tunnel are investigated. As many as four bodies are mounted in line with equal distances between successive bodies. The Mach number of the flowing air is in the range from 0.1 to 0.5. Total and individual drag values could be charged within a wide range by a suitable selection of the distance between successive bodies.

Balkowski, M.↗

Dynamic behavior of a beam drag-force anemometer

A cantilevered beam with strain gages attached to the fixed ends and the minimax technique were used in an experiment conducted to determine the dynamic behavior of a drag-force anemometer in high frequency, unsteady flow. In steady flow the output of the anemometer is proportional to stream velocity head and flow angle. Fluid mechanics suggests that, in unsteady flow, the output would also be proportional to the rate of change of fluid velocity. It was determined that effects due to the rate of change of fluid velocity are negligible for the probe geometry and frequencies involved.

Fralick, G. C.↗

Effect of propeller slipstream on the drag and performance of the engine cooling system for a general aviation twin-engine aircraft

The pressure recovery of incoming cooling air and the drag associated with engine cooling of a typical general aviation twin-engine aircraft was investigated experimentally. The semispan model was mounted vertically in the 40- by 80-Foot Wind Tunnel at Ames Research Center. The propeller was driven by an electric motor to provide thrust with low vibration levels for the cold-flow configuration. It was found that the propeller slipstream reduces the frontal air spillage around the blunt nacelle shape. Consequently, this slipstream effect promotes flow reattachment at the rear section of the engine nacelle and improves inlet pressure recovery. These effects are most pronounced at high angles of attack, that is, climb condition. For the cruise condition those improvements were more moderate.

Katz, J.↗

Higher order farfield drag minimization for a subcritical wing design code

A higher order Trefftz plane model of the undistorted interacting wing wakes of two symmetric subsonic planforms has been developed and integrated with an existing vortex lattice wing design code. The Trefftz plane calculation provides continuous, piecewise quadratically varying bound circulations, which are then interpolated in the nearfield vortex lattice representation of the wing. Integration of the surface slopes for a specified chord loading function provides the design wing camber surfaces. This paper outlines the theoretical development and presents comparisons between results obtained using the present theory and (1) previous exact solutions for minimum induced drag and (2) previous wing designs obtained using a discrete vortex wake moded.

Kuhlman, J. M.↗

Wingtip-Vortex Turbine Lowers Aircraft Drag

Turbine captures some of energy lost in aircraft wingtip vortexes. Wing-tip vortex turbine operates in crossflow of the lift-induced vortex; i.e., flow not parallel to the flightpath. Each turbine blade generates a force as a result of angle of attack between blade and nonstreamwise local flow. Turbine converts lost vortex energy to rotational energy and reduces induced drag.

Patterson, J. C. J.↗

Induced drag ideal efficiency factor of arbitrary lateral-vertical wing forms

A relatively simple equation is presented for estimating the induced drag ideal efficiency factor e for arbitrary cross sectional wing forms. This equation is based on eight basic but varied wing configurations which have exact solutions. The e function which relates the basic wings is developed statistically and is a continuous function of configuration geometry. The basic wing configurations include boxwings shaped as a rectangle, ellipse, and diamond; the V-wing; end-plate wing; 90 degree cruciform; circle dumbbell; and biplane. Example applications of the e equations are made to many wing forms such as wings with struts which form partial span rectangle dumbbell wings; bowtie, cruciform, winglet, and fan wings; and multiwings. Derivations are presented in the appendices of exact closed form solutions found of e for the V-wing and 90 degree cruciform wing and for an asymptotic solution for multiwings.

Deyoung, J.↗

Miniature drag-force anemometer

A miniature drag force anemometer is described which is capable of measuring unsteady as well as steady state velocity head and flow direction. It consists of a cantilevered beam with strain gages located at the base of the beam as the force measuring element. The dynamics of the beam are like those of lightly damped second order system with a natural frequency as high as 40 kilohertz depending on beam geometry and material. The anemometer is used in both forward and reversed flow. Anemometer characteristics and several designs are presented along with discussions of several applications.

Krause, L. N.↗

An investigation of drag reduction for tractor trailer vehicles with air deflector and boattail

A wind tunnel investigation was conducted to determine the influence of several physical variables on the aerodynamic drag of a trailer model. The physical variables included: a cab mounted wind deflector, boattail on trailer, flow vanes on trailer front, forced transition on trailer, and decreased gap between tractor and trailer. Tests were conducted at yaw angles (relative wind angles) of 0, 5, 10, 20, and 30 degrees and Reynolds numbers of 3.58 x 10 to the 5th power 6.12 x 10 to the 5th power based upon the equivalent diameter of the vehicles. The wind deflector on top of the cab produced a calculated reduction in fuel consumption of about 5 percent of the aerodynamic portion of the fuel budget for a wind speed of 15.3 km/hr (9.5 mph) over a wind angle range of 0 deg to 180 deg and for a vehicle speed of 88.5 km/hr (55 mph). The boattail produced a calculated 7 percent to 8 percent reduction in fuel consumption under the same conditions. The decrease in gap reduced the calculated fuel consumption by about 5 percent of the aerodynamic portion of the fuel budget.

Muirhead, V. U.↗

Preliminary wind-tunnel investigation of the effects of engine nacelles on a transport configuration with high lift drag ratios to a Mach number of 1.00

Wind tunnel tests to determine the effect of engine nacelles added to a low wing fuselage vertical tail configuration utilizing the NASA supercritical airfoil and a refined area ruled fuselage are discussed. The engine arrangement consisted of two aft fuselage, side mounted flow through nacelles and a solid body of revolution mounted above the fuselage in a manner similar to the Boeing 727. A preliminary analysis of the wind tunnel data shows that favorable interference drag can be obtained with the proper longitudinal locations of the nacelles, by canting the nacelle inlets, and by cusping the rearward region of the nacelle.

Flechner, S. G.↗