Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Contracting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76

pH-Driven Restructuring of Hydration Layers and Cation Adsorption at the Alumina–Water Interface

Oxide−water interfaces underpin ion separations, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. However, the molecular-scale links between pHdependent surface protonation, hydration-layer structure, and counterion adsorption remain poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)−water interface in 10 mM Rb + over pH 3−12. CTR measurements reveal two distinct adsorbed water layers at ∼2.2 and ∼3.5 Å above the surface. Each water layer shifts toward the substrate at transition pHs near 6.5 and 10.6, respectively, reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb + coverage and a decrease in mean adsorption height from ∼3.5 to ∼2.7 Å with increasing pH, indicating enhanced counterion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., the potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥ 3.5. The negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb + coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid−base chemistry to ion binding distances at an oxide−water interface.

Adsorption↗

Towards a unified picture of the water self-ions at the air-water interface: a density functional theory perspective

The propensities of the water self ions, H3O+ and OH- , for the air-water interface has implications for interfacial acid-base chemistry. Despite numerous experimental and computational studies, no consensus has been reached on the question of whether or not H3O+ and/or OH- prefer to be at the water surface or in the bulk. Here we report a molecular dynamics simulation study of the bulk vs. interfacial behavior of H3O+ and OH- that employs forces derived from density functional theory with a generalized gradient approximation exchangecorrelation functional (specifically, BLYP) and empirical dispersion corrections. We computed the potential of mean force (PMF) for H3O+ as a function of the position of the ion in a 215-molecule water slab. The PMF is flat, suggesting that H3O+ has equal propensity for the air-water interface and the bulk. We compare the PMF for H3O+ to our previously computed PMF for OH- adsorption, which contains a shallow minimum at the interface, and we explore how differences in solvation of each ion at the interface vs. the bulk are connected with interfacial propensity. We find that the solvation shell of H3O+ is only slightly dependent on its position in the water slab, while OH- partially desolvates as it approaches the interface, and we examine how this difference in solvation behavior is manifested in the electronic structure and chemistry of the two ions. DJT was supported by National Science Foundation grant CHE-0909227. CJM was supported by the U.S. Department of Energy‘s (DOE) Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory (PNNL) is operated for the Department of Energy by Battelle. The potential of mean force required resources of the Oak Ridge Leadership Computing Facility at the Oak Ridge National Laboratory, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DEAC05-00OR22725. The remaining simulations and analysis used resources of the National Energy Research Scientific Computing Center, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. at at Lawrence Berkeley National Laboratory. MDB is grateful for the support of the Linus Pauling Distinguished Postdoctoral Fellowship Program at PNNL.

Baer, Marcel D.↗

Metal Structural Environment in Zn x Ni 1-x O Macroscale and Nanoscale Solid Solutions

The metal structural environments in macroscale and nanoscale Zn x Ni 1–x O solid solutions were examined using X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). XRD demonstrates that solid solutions form for both macroscale (bulk) and nanoscale crystallites, and that the lattice parameter increases linearly as the amount of zinc increases, an indication of a homogeneous solid solution. XAS for both the bulk material and the nanoparticles reveals that the zinc atoms are incorporated into the rocksalt lattice and do not form zinc oxide clusters. The X-ray absorption near edge spectroscopy (XANES) of the Zn k-edge region in the solid solution is similar to the Ni k-edge region of NiO, and not the Zn k-edge region of ZnO. XPS confirms that solid solutions are formed; Auger parameters for zinc are consistent with a different geometry than the tetrahedral coordination of wurtzite ZnO. Nanoscaled solid solutions show evidence of a lattice contraction relative to macroscale solutions of the same concentration. While the contraction persists across the entire concentration range, the nanoparticle lattice parameter approaches the bulk Zn x Ni 1–x O value as the concentration of zinc increases to predict ZnO rocksalt lattice parameters that are in agreement with observed ZnO data.

Peck, Matthea A.↗

4D Proxy Imaging of Fracture Dilation and Stress Shadowing Using Electrical Resistivity Tomography During High Pressure Injections into a Dense Rock Formation

Fluid flow through fractured rock systems is governed in large part by the distribution, interconnectivity, and size of fracture apertures. In-situ stress is one of the primary factors controlling fracture aperture, and one that is altered significantly during high-pressure fluid injections or extractions. Interactions between stress, pore pressure, aperture, and fluid flow can result in complex and evolving poroelastic behavior with significant implications regarding the predictability and risk of developing and managing deep subsurface reservoirs (geothermal, fossil energy, and geologic carbon sequestration). In saturated crystalline rocks, bulk electrical conductivity is highly sensitive to porosity, and therefore to fracture aperture size and distribution. We demonstrate the use of time-lapse 3D electrical resistivity tomography for remotely monitoring stress induced changes in aperture distribution during high pressure injections into a fractured rock system at a scale of tens of meters. Results reveal a complex and continuously evolving stress field involving aperture dilations in the natural fracture system and aperture contractions in adjacent zones of shadow stress. Results provide information about the spatiotemporal changes in the system behavior and point to the potential of electrical imaging for autonomously and remotely monitoring evolving stress conditions by proxy through changes in bulk electrical conductivity.

electrical resisitivity tomography, stress, 4D Tim↗

Observational Quantification of Tropical High Cloud Changes and Feedbacks

Abstract The response of tropical high clouds to surface warming and their radiative feedbacks are uncertain. For example, it is uncertain whether their coverage will contract or expand in response to surface warming and whether such changes entail a stabilizing radiative feedback (iris feedback) or a neutral feedback. Global satellite observations with passive and active remote sensing capabilities over the last two decades can now be used to address such effects that were previously observationally limited. Using these observations, we show that the vertically averaged coverage exhibits no significant contraction or expansion. However, we find a reduction in coverage at the altitude where high clouds peak and are particularly radiatively‐relevant. This results in a negative longwave (LW) feedback and a positive shortwave (SW) feedback which cancel to yield a near‐zero high‐cloud amount feedback, providing observational evidence against an iris feedback. Next, we find that tropical high clouds have risen but have also warmed, leading to a positive, but small, high‐cloud altitude feedback dominated by the LW feedback. Finally, we find that high clouds have been thinning, leading to a near‐zero high‐cloud optical depth feedback from a cancellation between negative LW and positive SW feedbacks. Overall, high clouds lead the total tropical cloud feedback to be small due to the negative LW‐positive SW feedback cancellations.

54 ENVIRONMENTAL SCIENCES↗

Tuning charge-discharge induced unit cell breathing in layer-structured cathode materials for lithium-ion batteries

For LiMO 2 (M=Co, Ni, Mn) cathode materials, lattice parameters, a(b), contract during charge. Here we report such changes in opposite directions for lithium molybdenum trioxide (Li 2 MoO 3 ). A ‘unit cell breathing’ mechanism is proposed based on crystal and electronic structural changes of transition metal oxides during charge-discharge. Metal–metal bonding is used to explain such ‘abnormal’ behaviour and a generalized hypothesis is developed. The expansion of the metal-metal bond becomes the controlling factor for a(b) evolution during charge, in contrast to the shrinking metal-oxygen bond as controlling factor in ‘normal’ materials. The cation mixing caused by migration of molybdenum ions at higher oxidation state provides the benefits of reducing the c expansion range in the early stage of charging and suppressing the structure collapse at high voltage charge. These results may open a new strategy for designing layered cathode materials for high energy density lithium-ion batteries.

Zhou, Yong-Ning↗

Nanoscale strain-induced pair suppression as a vortex-pinning mechanism in high- temperature superconductors

Boosting large-scale superconductor applications require nanostructured conductors with artificial pinning centres immobilizing quantized vortices at high temperature and magnetic fields. Here we demonstrate a highly effective mechanism of artificial pinning centers in solution-derived high-temperature superconductor nanocomposites through generation of nanostrained regions where Cooper pair formation is suppressed. The nanostrained regions identified from transmission electron microscopy devise a very high concentration of partial dislocations associated with intergrowths generated between the randomly oriented nanodots and the epitaxial YBa{sub 2}Cu{sub 3}O{sub 7} matrix. Consequently, an outstanding vortex-pinning enhancement correlated to the nanostrain is demonstrated for four types of randomly oriented nanodot, and a unique evolution towards an isotropic vortex-pinning behaviour, even in the effective anisotropy, is achieved as the nanostrain turns isotropic. We suggest a new vortex-pinning mechanism based on the bond-contraction pairing model, where pair formation is quenched under tensile strain, forming new and effective core-pinning regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Myosin-binding protein C regulates the sarcomere lattice and stabilizes the OFF states of myosin heads

Muscle contraction is produced via the interaction of myofilaments and is regulated so that muscle performance matches demand. Myosin-binding protein C (MyBP-C) is a long and flexible protein that is tightly bound to the thick filament at its C-terminal end (MyBP-C C8C10 ), but may be loosely bound at its middle- and N-terminal end (MyBP-C C1C7 ) to myosin heads and/or the thin filament. MyBP-C is thought to control muscle contraction via the regulation of myosin motors, as mutations lead to debilitating disease. We use a combination of mechanics and small-angle X-ray diffraction to study the immediate and selective removal of the MyBP-C C1C7 domains of fast MyBP-C in permeabilized skeletal muscle. We show that cleavage leads to alterations in crossbridge kinetics and passive structural signatures of myofilaments that are indicative of a shift of myosin heads towards the ON state, highlighting the importance of MyBP-C C1C7 to myofilament force production and regulation.

59 BASIC BIOLOGICAL SCIENCES↗

Increasing the Reach of Low-Income Energy Programmes through Behaviourally Informed Peer Referral

Subsidized energy assistance programmes are a popular policy tool for promoting energy justice, but, like other social benefits programmes, are often undersubscribed. To improve uptake, some programmes have turned to social influence strategies, such as asking programme participants to refer their peers. Here, through a field experiment with California's low-income solar programme (N = 7,676), we show that referral behaviour depends on how existing participants are approached. Adding behavioural science strategies to a referral reward increases peer referral rates, referral quality and ultimately solar adoption. Compared with only reminding existing adopters of a potential US$200 reward for referrals that result in adoption, adding an appeal to reciprocity through a non-contingent US$1 gift - and further combining this gift with a simplified referral process - leads to 2.6-5.2 times as many solar contracts. These results highlight the potential of behaviourally informed peer referral programmes to accelerate equitable access to clean energy.

California↗

Observation of a promethium complex in solution

Lanthanide rare-earth metals are ubiquitous in modern technologies, but we know little about chemistry of the 61st element, promethium (Pm), a lanthanide that is highly radioactive and inaccessible. Despite its importance, Pm has been conspicuously absent from the experimental studies of lanthanides, impeding our full comprehension of the so-called lanthanide contraction phenomenon: a fundamental aspect of the periodic table that is quoted in general chemistry textbooks. Here we demonstrate a stable chelation of the 147 Pm radionuclide (half-life of 2.62 years) in aqueous solution by the newly synthesized organic diglycolamide ligand. The resulting homoleptic Pm III complex is studied using synchrotron X-ray absorption spectroscopy and quantum chemical calculations to establish the coordination structure and a bond distance of promethium. These fundamental insights allow a complete structural investigation of a full set of isostructural lanthanide complexes, ultimately capturing the lanthanide contraction in solution solely on the basis of experimental observations. Our results show accelerated shortening of bonds at the beginning of the lanthanide series, which can be correlated to the separation trends shown by diglycolamides. The characterization of the radioactive Pm III complex in an aqueous environment deepens our understanding of intra-lanthanide behaviour and the chemistry and separation of the f-block elements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Kinetic analyses for solid-state phase transition of metastable amorphous-AlO x (2.5 < x ≤ 3.0) nanostructures into crystalline alumina polymorphs

Solid-solid phase change materials (SS-PCMs) hold promise for energy storage/dissipation in batteries and energetic materials. Yet, phase change kinetics for SS-PCMs undergoing metastable to semi-stable/stable phase transformations remain relatively ill-studied because trapping metastable phases remain challenging. Recently, we demonstrated the kinetic entrapment and stabilization of a highly disordered and amorphous Al-oxide phase m-AlO x @C (x~2.5-3.0) via laser ablation synthesis in solution (LASiS). We report here, to our knowledge, the first chemical kinetics analysis for S-S phase transition of the m-AlO 3 @C nanocomposites (< 5–8 nm sizes) into semi-stable equilibrium alumina phases (θ/γ-Al 2 O 3 ) via disproportionation reaction, while releasing excess trapped gases. Our results indicate the atomic density of the AlO 3 structures to be ~5–10 times less than that of the final Al 2 O 3 phases, which led to the hypothesis of a volume shrinkage process during their phase transition. Temperature-dependent X-ray diffraction studies reveal the high-temperature phase transition for m-AlO 3 → θ/γ-Al 2 O 3 to follow contracting volume kinetics model, thereby validating our earlier hypothesis. Using the geometric volume contraction model, reaction kinetics analyses from Arrhenius plots reveal the activation energy barrier for the phase transition to be ~270±11 kJ/mol. This makes the activation energy barrier nearly identical to the oxidation of micron-sized Al particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Artificial dynamical effects in quantum field theory

In Newtonian mechanics, studying a system in a non-Galilean reference frame can lead to inertial pseudoforces appearing, such as the centrifugal force that seems to arise in dynamics analysed in a rotating frame. Likewise, artificial effects may arise in relativistic quantum field theory (QFT) if a system is studied in a framework that violates Poincaré invariance. Here, we highlight how such issues complicate the traditional canonical quantization of QFTs and can lead to a subjective description of natural phenomena. By contrast, the treatment of the same problem using light-front quantization is free from spurious pseudoeffects because Poincaré invariance is effectively preserved for all practical intents and purposes. We illustrate these statements using several examples: the Gerasimov-Drell-Hearn (GDH) relation, a fundamental feature of QFT; the absence of any measurable impact of Lorentz contraction in high-energy collisions; and the fictitious character of vacuum fluctuation contributions to the cosmological constant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Designing Dual-functionalized Gels for Self-reconfiguration and Autonomous Motion

Human motion is enabled by the concerted expansion and contraction of interconnected muscles that are powered by inherent biochemical reactions. One of the challenges in the field of biomimicry is eliciting this form of motion from purely synthetic materials, which typically do not generate internalized reactions to drive mechanical action. Moreover, for practical applications, this bio-inspired motion must be readily controllable. Herein, we develop a computational model to design a new class of polymer gels where structural reconfigurations and internalized reactions are intimately linked to produce autonomous motion, which can be directed with light. These gels contain both spirobenzopyran (SP) chromophores and the ruthenium catalysts that drive the oscillatory Belousov-Zhabotinsky (BZ) reaction. Importantly, both the SP moieties and the BZ reaction are photosensitive. When these dual-functionalized gels are exposed to non-uniform illumination, the localized contraction of the gel (due to the SP moieties) in the presence of traveling chemical waves (due to the BZ reaction) leads to new forms of spontaneous, self-sustained movement, which cannot be achieved by either of the mono-functionalized networks.

36 MATERIALS SCIENCE↗

The interaction of reactants, intermediates and products with Cu ions in Cu-SSZ-13 NH3 SCR catalysts: An energetic and ab initio X-ray absorption modeling study

Copper-exchanged SSZ-13 (Cu-SSZ-13) provides excellent catalytic activity and hydrothermal stability in the selective catalytic reduction (SCR) of NOx by using NH3 as a reductant. In this contribution, we compare the most likely positions for Cu with a single charge compensating Al atom (ZCu), including the effect of the adsorption of reactants, intermediates and products of a NH3 SCR reaction by using first-principles calculations based on density functional theory. We find that the 6-membered ring (6MR) site is the most energetically favorable while the 8-membered ring (8MR) sites are less favorable with energy differences about 0.5 eV with respect to the 6MR site. Upon molecular adsorption, the energy differences between Cu in the 8MR and 6MR sites decreases and almost disappears, which means that the thermodynamic stability of ZCu with molecularly adsorbed species is nearly identical for Cu in different sites. Considering more complicated scenarios of NO (or CO) adsorption, we find that the co-adsorption of 2 NO (or 2 CO) molecules weakens their interaction with Cu, as well as their co-adsorption with OH and H2O. The X-ray absorption near edge structure (XANES) of Cu in Cu-SSZ-13 under different conditions was also modeled from first principles. We find that the pre-edge feature in the K-edge XANES of Cu in clean Cu-SSZ-13 with Cu in a 8MR site is induced by a 1s to 4s transition while there is no pre-edge peak when Cu is in a 6MR site. Molecular adsorption onto Cu in a 6MR or a 8MR site results in the same K-edge XANES. When NO is adsorbed onto Cu in SSZ-13, we find that the origin of the small pre-edge peak in the K-edge XANES lies in a 1s to 3d electron transition. On the other hand, when CO or N2 is adsorbed onto an isolated Cu atom in SSZ-13, a transition from the 1s state to the hybridized state of 3d and 4p results in a pre-edge peak in the K-edge of the XANES spectrum. It is also found that the edge position and intensity of the maximum peak of Cu K-edge XANES depend on the Cu locations and the adsorbed molecules. By studying the Cu K-edge XANES of ZCu with adsorption of species of different oxidizing power, we conclude that a higher oxidation state of Cu will result in a higher energy edge position in the Cu K-edge XANES. These results are expected to greatly aid our understanding of Cu-SSZ-13 SCR catalysts. This work was supported by institutional funds provided to JSM from the Voiland School of Chemical Engineering and Bioengineering. Financial support was also provided by the National Science Foundation GOALI program under contract Nos. CBET-1258717, CBET-1258715 and CBET-1258690. We thank Prof. Fabio Ribeiro, Mr. Atish Parekh, Prof. W. F. Schneider, Mr. Christopher Paolucci, Mr. Trunjoyo Anggara and Prof. Jeff Miller for stimulating discussions on the modeling of the XANES spectrum and Ms. Alyssa Hensley for her comments on the manuscript. J.Sz. acknowledges the financial support of this work by the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Program. A portion of the computer time for the computational work was performed using EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research and located at PNNL. PNNL is a multi-program national laboratory operated for the US DOE by Battelle.

Zhang, Renqin↗

Liquid interfaces with pH-switchable nanoparticle arrays

Stimuli-responsive 2D nanoscale systems offer intriguing opportunities for creating switchable interfaces. At liquid interfaces, such systems can provide control over interfacial energies, surface structure, and rheological and transport characteristics, which is relevant, for example, to bio- and chemical reactors, microfluidic devices, and soft robotics. We explore the formation of a pH-responsive membrane formed from gold nanoparticles grafted with DNA (DNA–NPs) at a liquid–vapor interface. A DNA–NP 2D hexagonal lattice can be reversibly switched by pH modulation between an expanded state of non-connected nanoparticles at neutral pH and a contracted state of linked nanoparticles at acidic pH due to the AH + –H + A base pairing between A-motifs. Our in situ surface X-ray scattering studies reveal that the reversible lattice contraction can be tuned by the length of pH-activated linkers, with up to ~71% change in surface area.

59 BASIC BIOLOGICAL SCIENCES↗

Interlayer separation in hydrogen titanates enables electrochemical proton intercalation

Electrochemical proton intercalation into titanium oxides is typically limited to the near-surface region, necessitating the use of nanostructured high surface area materials to obtain high capacities. Here, we investigate the role of materials structure to extend intercalation beyond the near-surface region. Employing a series of hydrogen titanates (HTOs), we find that electrochemical protonation capacity significantly increases with interlayer structural protonation. The maximum capacity of ~80 mA h g -1 is achieved with H 2 Ti 3 O 7 , which also undergoes reversible structural and optical changes during the de/intercalation process. Using quasi-elastic neutron scattering, we show that structural protons are highly confined in the HTO interlayer with only localized, but not translational, dynamics. Electrochemical protonation leads to a contraction of theH 2 Ti 3 O 7 interlayer without causing significant strain in the two-dimensional titanate layers. Density functional theory calculations indicate more favorable adsorption energy for intercalated protons in H 2 Ti 3 O 7 as compared to HTOs with fewer structural protons. Here, we hypothesize that interlayer structural protons are the structural feature responsible for the high electrochemical protonation capacity in H 2 Ti 3 O 7 because they effectively decrease the interconnections between the titanate layers. This enables facile compensation of the electrochemically introduced strain via one-dimensional interlayer contraction. These results demonstrate the special structural requirements for bulk proton intercalation in titanium oxides, and offer a new materials design strategy for high energy density aqueous energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detection of open cluster rotation fields from Gaia EDR3 proper motions

Context: Most stars from in groups which with time disperse, building the field population of their host galaxy. In the Milky Way, open clusters have been continuously forming in the disk up to the present time, providing it with stars spanning a broad range of ages and masses. Observations of the details of cluster dissolution are, however, scarce. One of the main difficulties is obtaining a detailed characterisation of the internal cluster kinematics, which requires very high-quality proper motions. For open clusters, which are typically loose groups with tens to hundreds of members, there is the additional difficulty of inferring kinematic structures from sparse and irregular distributions of stars. Aims: Here, we aim to analyse internal stellar kinematics of open clusters, and identify rotation, expansion, or contraction patterns. Methods: We use Gaia Early Data Release 3 (EDR3) astrometry and integrated nested Laplace approximations to perform vector-field inference and create spatio-kinematic maps of 1237 open clusters. The sample is composed of clusters for which individual stellar memberships were already known, thus minimising contamination from field stars in the velocity maps. Projection effects were corrected using EDR3 data complemented with radial velocities from Gaia Data Release 2 and other surveys. Results: We report the detection of rotation patterns in eight open clusters. Nine additional clusters display possible rotation signs. We also observe 14 expanding clusters, with 15 other objects showing possible expansion patterns. Contraction is evident in two clusters, with one additional cluster presenting a more uncertain detection. In total, 53 clusters are found to display kinematic structures. Within these, elongated spatial distributions suggesting tidal tails are found in five clusters. These results indicate that the approach developed here can recover kinematic patterns from noisy vector fields, as those from astrometric measurements of open clusters or other stellar or galactic populations, thus offering a powerful probe for exploring the internal kinematics and dynamics of these types of objects.

79 ASTRONOMY AND ASTROPHYSICS↗

The Impact of Ceramic Shell Strength on Hot Tearing during Investment Casting

The effect of ceramic shell strength on hot tearing susceptibility during solidification was inspected practicing investment casting of the cobalt-base superalloy samples with the same casting conditions, but different ceramic shell systems. Results showed that the lower the ceramic shell strength upon using polymer additives, the lower the hindered contraction rate, and the lower the hindered contraction rate, the smaller the hot tearing tendency. Optical microscopy and electron microscopy scanning revealed that the hot tear propagated along the last solidified interdendritic phase, and that the hot tear surface had two major modes: (1) the ductile region in the outer layer; and (2) the inner region of liquid embrittlement.

36 MATERIALS SCIENCE↗